Self-Assembly of Uniaxial Fullerene Supramolecules Aligned within Carbon Nanotube Fibers.

The conductivity and strength of carbon nanotube (CNT) wires currently rival those of existing engineering materials; fullerene-based materials have not progressed similarly, despite their exciting transport properties such as superconductivity. This communication reveals a new mechanically robust wire of mutually aligned fullerene supramolecules self-assembled between CNT bundles, where the fullerene supramolecular internal crystal structure and outer surface are aligned and dispersed with the CNT bundles. The crystallinity, crystal dimensions, and other structural features of the fullerene supramolecular network are impacted by a number of important production processes such as fullerene concentration and postprocess annealing. The crystal spacing of the CNTs and fullerenes is not altered, suggesting that they are not exerting significant internal pressure on each other. In low concentrations, the addition of networked fullerenes makes the CNT wire mechanically stronger. More importantly, novel mutually aligned and networked fullerene supramolecules are now in a bulk self-supporting architecture.

Precision Modification of Monolayer Transition Metal Dichalcogenides via Environmental E-Beam Patterning.

Layered Transition Metal Dichalcogenides (TMDs) are an important class of materials that exhibit a wide variety of optoelectronic properties. The ability to spatially tailor their expansive property-space (e.g., conduction behavior, optical emission, surface interactions) is of special interest for applications including, but not limited to, sensing, bioelectronics, and spintronics/valleytronics. Current methods of property modulation focus on the modification of the basal surfaces and edge sites of the TMDs by the introduction of defects, functionalization with organic or inorganic moieties, alloying, heterostructure formation, and phase engineering. A majority of these methods lack the resolution for the development of next-generation nanoscale devices or are limited in the types of functionalities useful for efficient TMD property modification. In this study, we utilize electron-beam patterning on monolayer TMDs (MoSe2, WSe2 and MoS2) in the presence of a pressure-controlled atmosphere of water vapor within an environmental scanning electron microscope (ESEM). A series of parametric studies show local optical and electronic property modification depending on acceleration voltage, beam current, pressure, and electron dose. The ultimate pattern resolution achieved is 67 ± 9 nm. Raman and photoluminescence spectroscopies coupled with Kelvin Probe Force Microscopy reveal electron dose-dependent p-doping in the patterned regions, which we attribute to functionalization from the products of water vapor radiolysis (oxygen and hydroxyl groups). The modulation of the work function through patterning matches well with Density Functional Theory modeling. Finally, post-functionalization of the patterned areas with an organic fluorophore demonstrates a robust method to achieve nanoscale functionalization with high fidelity.

Versatile acid solvents for pristine carbon nanotube assembly.

Chlorosulfonic acid and oleum are ideal solvents for enabling the transformation of disordered carbon nanotubes (CNTs) into precise and highly functional morphologies. Currently, processing these solvents using extrusion techniques presents complications due to chemical compatibility, which constrain equipment and substrate material options. Here, we present a novel acid solvent system based on methanesulfonic or p-toluenesulfonic acids with low corrosivity, which form true solutions of CNTs at concentrations as high as 10 g/liter (≈0.7 volume %). The versatility of this solvent system is demonstrated by drop-in application to conventional manufacturing processes such as slot die coating, solution spinning continuous fibers, and 3D printing aerogels. Through continuous slot coating, we achieve state-of-the-art optoelectronic performance (83.6 %T and 14 ohm/sq) at industrially relevant production speeds. This work establishes practical and efficient means for scalable processing of CNT into advanced materials with properties suitable for a wide range of applications.

Biomarkers and Detection Platforms for Human Health and Performance Monitoring: A Review.

Human health and performance monitoring (HHPM) is imperative to provide information necessary for protecting, sustaining, evaluating, and improving personnel in various occupational sectors, such as industry, academy, sports, recreation, and military. While various commercially wearable sensors are on the market with their capability of "quantitative assessments" on human health, physical, and psychological states, their sensing is mostly based on physical traits, and thus lacks precision in HHPM. Minimally or noninvasive biomarkers detectable from the human body, such as body fluid (e.g., sweat, tear, urine, and interstitial fluid), exhaled breath, and skin surface, can provide abundant additional information to the HHPM. Detecting these biomarkers with novel or existing sensor technologies is emerging as critical human monitoring research. This review provides a broad perspective on the state of the art biosensor technologies for HHPM, including the list of biomarkers and their physiochemical/physical characteristics, fundamental sensing principles, and high-performance sensing transducers. Further, this paper expands to the additional scope on the key technical challenges in applying the current HHPM system to the real field.

Interaction of gases with monolayer WS2: an in situ spectroscopy study.

The optical and electronic properties of two-dimensional (2D) materials can be tuned through physical and chemical adsorption of gases. They are also ideal sensor platforms, where charge transfer from the adsorbate can induce a measurable change in the electrical resistance within a device configuration. While 2D materials-based gas sensors exhibit high sensitivity, questions exist regarding the direction of charge transfer and the role of lattice defects during sensing. Here we measured the dynamics of adsorption of NO2 and NH3 on monolayer WS2 using in situ photoluminescence (PL) and resonance Raman spectroscopy. Experiments were conducted across a temperature range of 25-250 °C and gas concentrations between 5-650 ppm. The PL emission energies blue- and red-shifted when exposed to NO2 and NH3, respectively, and the magnitude of the shift depended on the gas concentration as well as the temperature down to the lowest concentration of 5 ppm. Analysis of the adsorption kinetics revealed an exponential increase in the intensities of the trion peaks with temperature, with apparent activation energies similar to barriers for migration of sulfur vacancies in the WS2 lattice. The corresponding Resonance Raman spectra allowed the simultaneous measurement of the defect-induced LA mode. A positive correlation between the defect densities and the shifts in the PL emission energies establish lattice defects such as sulfur vacancies as the preferential sites for gas adsorption. Moreover, an increase in defect densities with temperature in the presence of NO2 and NH3 suggests that these gases may also play a role in the creation of lattice defects. Our study provides key mechanistic insights into gas adsorption on monolayer WS2, and highlights the potential for future development of spectroscopy-based gas sensors based on 2D materials.

Oxidation of Gallium-based Liquid Metal Alloys by Water.

Gallium alloys with other low melting point metals, such as indium or tin, to form room-temperature liquid eutectic systems. The gallium in the alloys rapidly forms a thin surface oxide when exposed to ambient oxygen. This surface oxide has been previously exploited for self-stabilization of liquid metal nanoparticles, retention of metastable shapes, and imparting stimuli-responsive behavior to the alloy surface. In this work, we study the effect of water as an oxidant and its role in defining the alloy surface chemistry. We identify several pathways that can lead to the formation of gallium oxide hydroxide (GaOOH) crystallites, which may be undesirable in many applications. Furthermore, we find that some crystallite formation pathways can be reinforced by typical top-down particle synthesis techniques like sonication. This improved understanding of interfacial interactions provides critical insight for process design and implementation of advanced devices that utilize the unique coupling of flexibility and conductivity offered by these gallium-based liquid metal alloys.

Zeolite Nanosheets Stabilize Catalyst Particles to Promote the Growth of Thermodynamically Unfavorable, Small-Diameter Carbon Nanotubes.

A challenge in the synthesis of single-wall carbon nanotubes (SWCNTs) is the lack of control over the formation and evolution of catalyst nanoparticles and the lack of control over their size or chirality. Here, zeolite MFI nanosheets (MFI-Ns) are used to keep cobalt (Co) nanoparticles stable during prolonged annealing conditions. Environmental transmission electron microscopy (ETEM) shows that the MFI-Ns can influence the size and shape of nanoparticles via particle/support registry, which leads to the preferential docking of nanoparticles to four or fewer pores and to the regulation of the SWCNT synthesis products. The resulting SWCNT population exhibits a narrow diameter distribution and SWCNTs of nearly all chiral angles, including sub-nm zigzag (ZZ) and near-ZZ tubes. Theoretical simulations reveal that the growth of these unfavorable tubes from unsupported catalysts leads to the rapid encapsulation of catalyst nanoparticles bearing them; their presence in the growth products suggests that the MFI-Ns prevent nanoparticle encapsulation and prologue ZZ and near-ZZ SWCNT growth. These results thus present a path forward for controlling nanoparticle formation and evolution, for achieving size- and shape-selectivity at high temperature, and for controlling SWCNT synthesis.

Efficient Closed-loop Maximization of Carbon Nanotube Growth Rate using Bayesian Optimization.

A major technological challenge in materials research is the large and complex parameter space, which hinders experimental throughput and ultimately slows down development and implementation. In single-walled carbon nanotube (CNT) synthesis, for instance, the poor yield obtained from conventional catalysts is a result of limited understanding of input-to-output correlations. Autonomous closed-loop experimentation combined with advances in machine learning (ML) is uniquely suited for high-throughput research. Among the ML algorithms available, Bayesian optimization (BO) is especially apt for exploration and optimization within such high-dimensional and complex parameter space. BO is an adaptive sequential design algorithm for finding the global optimum of a black-box objective function with the fewest possible measurements. Here, we demonstrate a promising application of BO in CNT synthesis as an efficient and robust algorithm which can (1) improve the growth rate of CNT in the BO-planner experiments over the seed experiments up to a factor 8; (2) rapidly improve its predictive power (or learning); (3) Consistently achieve good performance regardless of the number or origin of seed experiments; (4) exploit a high-dimensional, complex parameter space, and (5) achieve the former 4 tasks in just over 100 hundred experiments (~8 experimental hours) - a factor of 5× faster than our previously reported results.

Strain engineering and epitaxial stabilization of halide perovskites.

Strain engineering is a powerful tool with which to enhance semiconductor device performance1,2. Halide perovskites have shown great promise in device applications owing to their remarkable electronic and optoelectronic properties3-5. Although applying strain to halide perovskites has been frequently attempted, including using hydrostatic pressurization6-8, electrostriction9, annealing10-12, van der Waals force13, thermal expansion mismatch14, and heat-induced substrate phase transition15, the controllable and device-compatible strain engineering of halide perovskites by chemical epitaxy remains a challenge, owing to the absence of suitable lattice-mismatched epitaxial substrates. Here we report the strained epitaxial growth of halide perovskite single-crystal thin films on lattice-mismatched halide perovskite substrates. We investigated strain engineering of α-formamidinium lead iodide (α-FAPbI3) using both experimental techniques and theoretical calculations. By tailoring the substrate composition-and therefore its lattice parameter-a compressive strain as high as 2.4 per cent is applied to the epitaxial α-FAPbI3 thin film. We demonstrate that this strain effectively changes the crystal structure, reduces the bandgap and increases the hole mobility of α-FAPbI3. Strained epitaxy is also shown to have a substantial stabilization effect on the α-FAPbI3 phase owing to the synergistic effects of epitaxial stabilization and strain neutralization. As an example, strain engineering is applied to enhance the performance of an α-FAPbI3-based photodetector.

Isolating the Roles of Hydrogen Exposure and Trace Carbon Contamination on the Formation of Active Catalyst Populations for Carbon Nanotube Growth.

Limited understanding of the factors influencing the yield of carbon nanotubes (CNTs) relative to the number of catalyst particles remains an important barrier to their large-scale production with high quality, and to tailoring CNT properties for applications. This lack of understanding is evident in the frequent use of Edisonian approaches to give high-yield CNT growth, and in the sometimes-confusing influence of trace residues on the reactor walls. In order to create conditions wherein CNT yield is reproducible and to enable large-scale and reliable CNT synthesis, it is imperative to understand-fundamentally-how these common practices impact catalytic activity and thus CNT number density. Herein, we use ambient pressure-X-ray photoelectron spectroscopy (AP-XPS) to reveal the influence of carbon and hydrogen on the coupling between catalyst reduction and CNT nucleation, from an iron catalyst film. We observe a positive correlation between the degree of catalyst reduction and the density of vertically aligned CNTs (forests), verifying that effective catalyst reduction is critical to CNT nucleation and to the resulting CNT growth yield. We demonstrate that the extent of catalyst reduction is the reason for low CNT number density and for lack of self-organization, lift-off, and growth of CNT forests. We also show that hydrocarbon byproducts from consecutive growths can facilitate catalyst reduction and increase CNT number density significantly. These findings suggest that common practices used in the field-such as reactor preconditioning-aid in the reduction of the catalyst population, thus improving CNT number density and enabling the growth of dense forests. Our results also motivate future work using AP-XPS and complementary metrology tools to optimize CNT growth conditions according to the catalyst chemical state.

Catalyst discovery through megalibraries of nanomaterials.

The nanomaterial landscape is so vast that a high-throughput combinatorial approach is required to understand structure-function relationships. To address this challenge, an approach for the synthesis and screening of megalibraries of unique nanoscale features (>10,000,000) with tailorable location, size, and composition has been developed. Polymer pen lithography, a parallel lithographic technique, is combined with an ink spray-coating method to create pen arrays, where each pen has a different but deliberately chosen quantity and composition of ink. With this technique, gradients of Au-Cu bimetallic nanoparticles have been synthesized and then screened for activity by in situ Raman spectroscopy with respect to single-walled carbon nanotube (SWNT) growth. Au3Cu, a composition not previously known to catalyze SWNT growth, has been identified as the most active composition.

Carbon Nanotubes and Related Nanomaterials: Critical Advances and Challenges for Synthesis toward Mainstream Commercial Applications.

Advances in the synthesis and scalable manufacturing of single-walled carbon nanotubes (SWCNTs) remain critical to realizing many important commercial applications. Here we review recent breakthroughs in the synthesis of SWCNTs and highlight key ongoing research areas and challenges. A few key applications that capitalize on the properties of SWCNTs are also reviewed with respect to the recent synthesis breakthroughs and ways in which synthesis science can enable advances in these applications. While the primary focus of this review is on the science framework of SWCNT growth, we draw connections to mechanisms underlying the synthesis of other 1D and 2D materials such as boron nitride nanotubes and graphene.

Electrical Control of Shape in Voxelated Liquid Crystalline Polymer Nanocomposites.

Liquid crystal elastomers (LCEs) exhibit anisotropic mechanical, thermal, and optical properties. The director orientation within an LCE can be spatially localized into voxels [three-dimensional (3-D) volume elements] via photoalignment surfaces. Here, we prepare nanocomposites in which both the orientation of the LCE and single-walled carbon nanotube (SWNT) are locally and arbitrarily oriented in discrete voxels. The addition of SWNTs increases the stiffness of the LCE in the orientation direction, yielding a material with a 5:1 directional modulus contrast. The inclusion of SWNT modifies the thermomechanical response and, most notably, is shown to enable distinctive electromechanical deformation of the nanocomposite. Specifically, the incorporation of SWNTs sensitizes the LCE to a dc field, enabling uniaxial electrostriction along the orientation direction. We demonstrate that localized orientation of the LCE and SWNT allows complex 3-D shape transformations to be electrically triggered. Initial experiments indicate that the SWNT-polymer interfaces play a crucial role in enabling the electrostriction reported herein.

Flexible Gallium Nitride for High-Performance, Strainable Radio-Frequency Devices.

Flexible gallium nitride (GaN) thin films can enable future strainable and conformal devices for transmission of radio-frequency (RF) signals over large distances for more efficient wireless communication. For the first time, strainable high-frequency RF GaN devices are demonstrated, whose exceptional performance is enabled by epitaxial growth on 2D boron nitride for chemical-free transfer to a soft, flexible substrate. The AlGaN/GaN heterostructures transferred to flexible substrates are uniaxially strained up to 0.85% and reveal near state-of-the-art values for electrical performance, with electron mobility exceeding 2000 cm2 V-1 s-1 and sheet carrier density above 1.07 × 1013 cm-2 . The influence of strain on the RF performance of flexible GaN high-electron-mobility transistor (HEMT) devices is evaluated, demonstrating cutoff frequencies and maximum oscillation frequencies greater than 42 and 74 GHz, respectively, at up to 0.43% strain, representing a significant advancement toward conformal, highly integrated electronic materials for RF applications.

Harvesting electrical energy from carbon nanotube yarn twist.

Mechanical energy harvesters are needed for diverse applications, including self-powered wireless sensors, structural and human health monitoring systems, and the extraction of energy from ocean waves. We report carbon nanotube yarn harvesters that electrochemically convert tensile or torsional mechanical energy into electrical energy without requiring an external bias voltage. Stretching coiled yarns generated 250 watts per kilogram of peak electrical power when cycled up to 30 hertz, as well as up to 41.2 joules per kilogram of electrical energy per mechanical cycle, when normalized to harvester yarn weight. These energy harvesters were used in the ocean to harvest wave energy, combined with thermally driven artificial muscles to convert temperature fluctuations to electrical energy, sewn into textiles for use as self-powered respiration sensors, and used to power a light-emitting diode and to charge a storage capacitor.

Understanding properties of engineered catalyst supports using contact angle measurements and X-ray reflectivity.

There is significant interest in broadening the type of catalyst substrates that support the growth of high-quality carbon nanotube (CNT) carpets. In this study, ion beam bombardment has been utilized to modify catalyst substrates for CNT carpet growth. Using a combination of contact angle measurements (CAMs) and X-ray reflectivity (XRR) for the first time, new correlations between the physicochemical properties of pristine and engineered catalyst substrates and CNT growth behavior have been established. The engineered surfaces obtained after exposure to different degrees of ion beam damage have distinct physicochemical properties (porosity, layer thickness, and acid-base properties). The CAM data were analyzed using the van Oss-Chaudhury-Good model, enabling the determination of the acid-base properties of the substrate surfaces. For the XRR data, a Fourier analysis of the interference patterns enabled extraction of layer thickness, while the atomic density and interfacial roughness were extracted by analyzing the amplitude of the interference oscillations. The dramatic transformation of the substrate from "inactive" to "active" is attributed to a combined effect of substrate porosity or damage depth and Lewis basicity. The results reveal that the efficiency of catalyst substrates can be further improved by increasing the substrate basicity, if the minimum surface porosity is established. This study advances the use of a non-thermochemical approach for catalyst substrate engineering, as well as demonstrates the combined utility of CAM and XRR as a powerful, nondestructive, and reliable tool for rational catalyst design.

Creasable Batteries: Understanding Failure Modes through Dynamic Electrochemical Mechanical Testing.

Thin-film batteries that can be folded, bent, and even repeatedly creased with minimal or no loss in electrochemical performance have been demonstrated and systematically evaluated using two dynamic mechanical testing approaches for either controlled bending or creasing of flexible devices. The results show that mechanically robust and flexible Li-ion batteries (Li4Ti5O12//LiFePO4) based on the use of a nonwoven multiwalled carbon nanotube (MWNT) mat as a current collector (CC) exhibited a 14-fold decrease in voltage fluctuation at a bending strain of 4.2%, as compared to cells using traditional metal foil CCs. More importantly, MWNT-based full-cells exhibited excellent mechanical integrity through 288 crease cycles, whereas the foil full-cell exhibited continuously degraded performance with each fold and catastrophic fracture after only 94 folds. The enhancements due to MWNT CCs can be attributed to excellent interfacial properties as well as high mechanical strength coupled with compliancy, which allow the batteries to easily conform during mechanical abuse. These results quantitatively demonstrate the substantial enhancement offered in both mechanical and electrochemical stability which can be realized with traditional processing approaches when an appropriate choice of a flexible and robust CC is utilized.

Direct observation of morphological evolution of a catalyst during carbon nanotube forest growth: new insights into growth and growth termination.

In this study, we develop a new methodology for transmission electron microscopy (TEM) analysis that enables us to directly investigate the interface between carbon nanotube (CNT) arrays and the catalyst and support layers for CNT forest growth without any damage induced by a post-growth TEM sample preparation. Using this methodology, we perform in situ and ex situ TEM investigations on the evolution of the morphology of the catalyst particles and observe the catalyst particles to climb up through CNT arrays during CNT forest growth. We speculate that the lifted catalysts significantly affect the growth and growth termination of CNT forests along with Ostwald ripening and sub-surface diffusion. Thus, we propose a modified growth termination model which better explains various phenomena related to the growth and growth termination of CNT forests.

Discovery of wall-selective carbon nanotube growth conditions via automated experimentation.

Applications of carbon nanotubes continue to advance, with substantial progress in nanotube electronics, conductive wires, and transparent conductors to name a few. However, wider application remains impeded by a lack of control over production of nanotubes with the desired purity, perfection, chirality, and number of walls. This is partly due to the fact that growth experiments are time-consuming, taking about 1 day per run, thus making it challenging to adequately explore the many parameters involved in growth. We endeavored to speed up the research process by automating CVD growth experimentation. The adaptive rapid experimentation and in situ spectroscopy CVD system described in this contribution conducts over 100 experiments in a single day, with automated control and in situ Raman characterization. Linear regression modeling was used to map regions of selectivity toward single-wall and multiwall carbon nanotube growth in the complex parameter space of the water-assisted CVD synthesis. This development of the automated rapid serial experimentation is a significant progress toward an autonomous closed-loop learning system: a Robot Scientist.

Pulsed-laser deposited transition-metal carbides for field-emission cathode coatings.

Thin films of transition-metal carbides ZrC, HfC, and TiC were deposited by pulsed-laser deposition under vacuum. The surface chemistry of the films was characterized with ultraviolet photoelectron spectroscopy, X-ray photoelectron spectroscopy, and Auger electron spectroscopy in situ. X-ray diffraction was used to characterize the film structure. TiC was shown to be nearly stoichiometric and polycrystalline. The TiC was applied to a vertically aligned carbon nanotube sample and characterized by field emission. Field-emission results showed enhanced current and current density at a film thickness, 5 nm, not previously reported in the literature. Emission from TiC films was also shown to be less affected by adsorbates during field emission. Pulsed-laser deposition of TiC offers a distinct advantage over other techniques in that high-quality films can be obtained under ultrahigh vacuum conditions without the use of a reactive background gas or excessively high annealing temperatures. The application of TiC by pulsed-laser deposition as a cathode coating shows potential for integration into a fabrication process.