Asynchronous quasi delay insensitive majority voters corresponding to quintuple modular redundancy for mission/safety-critical applications.

Electronic circuits and systems employed in mission- and safety-critical applications such as space, aerospace, nuclear plants etc. tend to suffer from multiple faults due to radiation and other harsh external phenomena. To overcome single or multiple faults from affecting electronic circuits and systems, progressive module redundancy (PMR) has been suggested as a potential solution that recommends the use of different levels of redundancy for the vulnerable portions of a circuit or system depending upon their criticality. According to PMR, triple modular redundancy (TMR) can be used where a single fault is likely to occur and should be masked, and quintuple modular redundancy (QMR) can be used where double faults are likely to occur and should be masked. In this article, we present asynchronous QDI majority voter designs for QMR and state which are preferable from cycle time (i.e., speed), area, power, and energy perspectives. Towards this, we implemented example QMR circuits in a robust QDI asynchronous design style by employing a delay insensitive dual rail code for data encoding and adopting four-phase handshake protocols for data communication. Based on physical implementations using a 32/28nm CMOS process, we find that our proposed QMR majority voter achieves improved optimization in speed and energy.

Speed, energy and area optimized early output quasi-delay-insensitive array multipliers.

Multiplication is a widely used arithmetic operation that is frequently encountered in micro-processing and digital signal processing. Multiplication is implemented using a multiplier, and recently, QDI asynchronous array multipliers were presented in the literature utilizing delay-insensitive double-rail data encoding and four-phase return-to-zero (RTZ) handshaking and four-phase return-to-one (RTO) handshaking. In this context, this article makes two contributions: (i) the design of a new asynchronous partial product generator, and (ii) the design of a new asynchronous half adder. We analyze the usefulness of the proposed partial product generator and the proposed half adder to efficiently realize QDI array multipliers. When the new partial product generator and half adder are used along with our indicating full adder, significant reductions are achieved in the design metrics compared to the optimum QDI array multiplier reported in the literature. The cycle time is reduced by 17%, the area is reduced by 16.1%, the power is reduced by 15.3%, and the product of power and cycle time is reduced by 29.6% with respect to RTZ handshaking. On the other hand, the cycle time is reduced by 13%, the area is reduced by 16.1%, the power is reduced by 15.2%, and the product of power and cycle time is reduced by 26.1% with respect to RTO handshaking. Further, the RTO handshaking is found to be preferable to RTZ handshaking to achieve slightly improved optimizations in the design metrics. The QDI array multipliers were realized using a 32/28nm complementary metal oxide semiconductor (CMOS) process technology.

Speed and energy optimized quasi-delay-insensitive block carry lookahead adder.

We present a new asynchronous quasi-delay-insensitive (QDI) block carry lookahead adder with redundant carry (BCLARC) realized using delay-insensitive dual-rail data encoding and 4-phase return-to-zero (RTZ) and 4-phase return-to-one (RTO) handshaking. The proposed QDI BCLARC is found to be faster and energy-efficient than the existing asynchronous adders which are QDI and non-QDI (i.e., relative-timed). Compared to existing asynchronous adders corresponding to various architectures such as the ripple carry adder (RCA), the conventional carry lookahead adder (CCLA), the carry select adder (CSLA), the BCLARC, and the hybrid BCLARC-RCA, the proposed BCLARC is found to be faster and more energy-optimized. The cycle time (CT), which is expressed as the sum of the worst-case times taken for processing the data and the spacer, governs the speed. The product of average power dissipation and CT viz. the power-cycle time product (PCTP) defines the low power/energy efficiency. For a 32-bit addition, the proposed QDI BCLARC achieves the following reductions in design metrics on average over its counterparts when considering RTZ and RTO handshaking: i) 20.5% and 19.6% reductions in CT and PCTP respectively compared to an optimum QDI early output RCA, ii) 16.5% and 15.8% reductions in CT and PCTP respectively compared to an optimum relative-timed RCA, iii) 32.9% and 35.9% reductions in CT and PCTP respectively compared to an optimum uniform input-partitioned QDI early output CSLA, iv) 47.5% and 47.2% reductions in CT and PCTP respectively compared to an optimum QDI early output CCLA, v) 14.2% and 27.3% reductions in CT and PCTP respectively compared to an optimum QDI early output BCLARC, and vi) 12.2% and 11.6% reductions in CT and PCTP respectively compared to an optimum QDI early output hybrid BCLARC-RCA. The adders were implemented using a 32/28nm CMOS technology.

Design of two-dimensional recursive filters by using neural networks.

A new design method for two-dimensional (2-D) recursive digital filters is investigated. The design of the 2-D filter is reduced to a constrained minimization problem the solution of which is achieved by the convergence of an appropriate neural network. The method is tested on a numerical example and compared with previously published methods when applied to the same example. Advantages of the proposed method over the existing ones are discussed as well.