Graphene oxide-incorporated silver-based photocatalysts for enhanced degradation of organic toxins: a review.

Environmental contamination and scarcity of energy have been deepening over the last few decades. Heterogeneous photocatalysis plays a prominent role in environmental remediation. The failure of earlier metal oxide systems like pure TiO2 and ZnO as stable visible-light photocatalysts demanded more stable catalysts with high photodegradation efficiency. Silver-based semiconductor materials gained popularity as visible-light-responsive photocatalysts with a narrow bandgap. But their large-scale usage in natural water bodies for organic contaminant removal is minimal. The factors like self-photocorrosion and their slight solubility in water have prevented the commercial use. Various efforts have been made to improve their photocatalytic activity. This review focuses on those studies in which silver-based semiconductor materials are integrated with carbonaceous graphene oxide (GO) and reduced graphene oxide (RGO). The decoration of Ag-based semiconductor components on graphene oxide having high-surface area results in binary composites with enhanced visible-light photocatalytic activity and stability. It is found that the introduction of new efficient materials further increases the effectiveness of the system. So binary and ternary composites of GO and Ag-based materials are reviewed in this paper.

Dual mode detection and sunlight-driven photocatalytic degradation of tetracycline with tailor-made N-doped carbon dots.

Carbon dots have emerged as one of the most promising materials with various potential applications derived from their unique photophysical and chemical properties. The present work investigates the electrochemical and photochemical properties of one-pot synthesized carbon dots for environmental sustainability. Facile microwave-assisted pyrolysis of urea and glucose yielded nitrogen doped carbon dots (N-doped carbon dots) with blue fluorescence and a quantum yield of 14.9%. As synthesized N- doped carbon dot had intense fluorescence, stability, water solubility, and biocompatibility. In the sensing studies, N-doped carbon dots appeared as a dual sensor for drug tetracycline with excellent sensitivity and selectivity. Beyond sense, the carbon dots have the potential to act as a photocatalyst for the degradation of tetracycline. Further, N-doped carbon dot could bring exhaustive degradation of tetracycline (>95%) within 10 min in the absence of any additives. This is the first time report on the utilization of raw non-metal doped carbon dots as a photocatalyst for the degradation of tetracycline.

Biomass-derived carbon dots as a sensitive and selective dual detection platform for fluoroquinolones and tetracyclines.

A novel carbon dot (CD) was synthesized through the facile and simple hydrothermal method from Curcuma amada, as the precursor for the first time. These CDs with an average diameter of 4.6 nm display blue fluorescence, with excitation/emission maxima at 360/445 nm and a quantum yield of 14.1%. It exhibited high stability under different conditions and was characterized using various techniques. These CDs can be employed as a dual-sensing platform to detect tetracyclines and fluoroquinolones, two antibiotic classes. Even though antibiotics are regarded as an inevitable commodity, overuse and improper management of discarded antibiotics pose a severe threat to the environment. Herein, we developed a dual-sensing, biocompatible sensor with high selectivity and sensitivity to detect antibiotics. CD was employed as a fluorescence probe and detected tetracycline and fluoroquinolone antibiotic through inner filter effect-based fluorescence quenching and hydrogen bonding-based enhancement process, respectively. The linear range was 0-16 µM and the detection limit was 33 nM for tetracycline and 2 nM for fluoroquinolone antibiotic. As an electrochemical probe, CD selectively detected tetracycline with a lower detection limit of 0.5 nM over a linear range of 0-16 µM. Using both methods, a real sample analysis of the developed sensor exhibited accurate reliability and precision.

Rational design of Ag2CO3-loaded SGO heterostructure with enhanced photocatalytic abatement of organic pollutants under visible light irradiation.

The photocatalytic activity of semiconducting silver carbonate was restricted by the lower stability and fast recombination rate of photogenerated electron-hole pairs. Sulfur-doped graphene oxide (SGO) is used as a cocatalyst for improving the photocatalytic activity of Ag2CO3 by reducing the recombination rate. A simple precipitation method was used for the modification of silver carbonate. The chemical, physical, optical, and electrochemical properties of the modified photocatalyst was characterized by XRD, SEM, TEM, UV-vis DRS, XPS, CV, impedance, and amperometry. The fabricated SGO-Ag2CO3 composite was successfully degraded various organic pollutants such as methylene blue (MB), rhodamine B(RhB), methyl orange (MO), tartrazine, and thiram with augmented mineralization. The optimization of weight percentage of the developed binary composite with 0.5% SGO-Ag2CO3 showed enhanced photocatalytic degradation and followed pseudo-first-order kinetics with rate constant 0.126. More than 90% of degradation efficiency of the pollutants within a short time promises the binary heterostructure for future industrial applications. The excellent stability and reproducibility of the composite opened a new route in the treatment of wastewater.

A Review on Carbon Quantum Dot Based Semiconductor Photocatalysts for the Abatement of Refractory Pollutants.

Photocatalysis is a green approach frequently utilised to eliminate a variety of environmentally hazardous refractory pollutants. Accordingly, the modification of semiconductor photocatalysts with Carbon Quantum Dots (CQDs) is of great importance for the treatment of such pollutants due to their attractive physical and chemical properties. CQDs are a perfect candidate to handle photocatalysts of high-performance since they operate as co-catalysts and as visible light harvesters. The higher separation rate of electron-hole pairs in the photocatalytic system is attributable to better photodegradation efficiency. This review classifies CQD based photocatalysts as pure, doped and composite materials and discusses the specific advantages of CQDs in visible light-driven photocatalysis. In this work, the versatile roles of CQDs in CQD-based photocatalytic systems are thoroughly discussed and summarised.

A Review on Characterization Techniques for Carbon Quantum Dots and Their Applications in Agrochemical Residue Detection.

Carbon quantum dots (CQDs) have emerged as one of the most promising nanomaterials in the carbon nanostructures family in recent years due to their low toxicity, simple synthetic methods, unique fluorescence emission, good photostability, excellent water solubility, high specific surface areas and outstanding electronic properties. They have thus been employed in a wide range of applications, including fluorescent sensing, electrochemical sensing, bioimaging, drug delivery, antimicrobial studies, antioxidants, and photocatalysis. CQDs drawn great interest in sensing applications due to their unique photochemical, electrochemical and electrochemiluminescence properties. They exhibit excitation wavelength-dependent or -independent photoluminescence (PL) behaviour, high quantum yield, and promising binding ability with analytes, which make them an ideal candidate for use in PL based sensing platforms. Excessive use of agrochemicals in farm fields can pollute the environment and have potentially adverse health effects on aquatic and human life. Since there are very few monitoring techniques are available for sensing such harmful substances, there is an urgent need to develop a sensor for the facile, rapid and on-site detection and quantification of agrochemical residues in the environment. Several CQD-based fluorophores for detecting agrochemical residues employing static or dynamic quenching processes have recently been published. The key quenching mechanisms involved in the sensing process include FRET, PET and IFE. The first part of this review intends to provide a comprehensive overview of various techniques to characterize CQDs such as UV-vis., FT-IR, PL, XRD, NMR, TEM, TGA, XPS and Raman analysis. In addition application of CQDs as fluorescent sensors for agrochemical residue in different media are summarized in this reiew. The LOD values and rapid action of the sensor demonstrates significant advantages of these methods over conventional analytical procedures.

Microwave assisted green synthesis of silver nanoparticles for optical, catalytic, biological and electrochemical applications.

Plant-derived nanoparticles have multi-functionalities owing to their ecological origin and biocompatible nature. A novel and stable silver nanoparticle (AgNP) was reported here using Cyanthillium cinereum (C. cinereum) as a reducing as well as capping agent by rapid microwave-assisted green method. The synthesized nanoparticles revealed their crystalline and spherical nature with an average size of 19.25 ± 0.44 nm in HR-TEM analysis. The excitation of electrons from occupied d-bands to states above the Fermi level while employing photoluminescence studies of AgNP indicated their awesome optical properties. Rapid decomposition of dangerous organic dyes like methylene blue and fuchsine in the catalytic presence of AgNP was evidenced from simple UV-visible spectral analysis. In vitro antioxidant potential assessed by DPPH assay indicated an IC50 value of 40.80 ± 0.14 µg/mL for the new AgNP. A substantial control on the growth of pathogenic bacteria such as Staphylococcus aureus and Klebsiella pneumonia can be achieved by synthesized nanoparticles as demonstrated by the well diffusion method. AgNP was also functioned as a non-enzymatic electrochemical sensor with a sharp oxidation peak with peak potentials at 0.366 V and it has a wide application as a bio sensor in neurobiology especially in the detection of neurotransmitters like dopamine with high sensitivity.

Cyclodextrin-mediated gold nanoparticles as multisensing probe for the selective detection of hydroxychloroquine drug.

ß-Cyclodextrin (ß-CD) modified gold nanoparticles (AuNP) were rapidly synthesized using microwave assisted procedure. Parameters, such as time, pH and concentrations of ß-CD and gold, were optimized for the synthesis of ß-CD-AuNP. The addition of enantiomers and racemic mixture of hydroxychloroquine (R-HCQ, S-HCQ and RS-HCQ) drugs and their interaction with ß-CD led to a red shift in the surface plasmon resonance of ß-CD-AuNP. The changes associated with the introduction of HCQ in ß-CD-AuNP were studied using various characterization techniques such as UV-vis, FT-IR, XRD, dynamic light scattering, zeta potential, transmission electron microscopy, fluorescence spectroscopy and electrochemical techniques. The host-guest interaction of ß-cyclodextrin with S-HCQ, R-HCQ and RS-HCQ resulted in the aggregation of gold nanoparticles. The surface plasmon resonance at 521 nm for ß-CD-AuNP was shifted to 600, 620 and 670 nm on the addition of S-HCQ, R-HCQ and RS-HCQ, respectively, with a color change from pink to blue. The selectivity and sensitivity of the developed system for RS-HCQ were investigated and the limit of detection (LOD=3 s/m) was found to be 2.61, 0.15, and 0.85 nM for optical, fluorescence and electrochemical methods, respectively. The successful monitoring of RS-HCQ drug in pharmaceutical samples is possible with these techniques. ELECTRONIC SUPPLEMENTARY MATERIAL: Supplementary material is available for this article at 10.1007/s11814-020-0719-7 and is accessible for authorized users.

Fast and efficient degradation of water pollutant dyes and fungicide by novel sulfur-doped graphene oxide-modified Ag3PO4 nanocomposite.

The sulfur-doped graphene oxide (sGO)-integrated Ag3PO4 composite displayed very high catalytic activity toward prominent water pollutants like textile dyes and fungicide under sunlight. The optimum amount of sGO doping was found as 5% for degradation. The novel composite degraded 99% of methylene blue (MB) in only 5 min of sunlight exposure, which is 16 and 8 times faster than Ag3PO4 and 5% GO-Ag3PO4. High mineralization was observed for MB with a total organic carbon (TOC) removal of 98% in 30 min. The composite mineralized rhodamine B, methyl orange, and acid red 18 dyes with a TOC removal above 95%. Moreover, a toxic dithiocarbamate fungicide thiram was degraded in 1 h with a TOC removal of 82% leaving less toxic thiourea. The formation of sGO-Ag3PO4 n-n heterojunction increases charge transport and photocatalytic activity of the composite to incredible extent along with hollow morphology and in situ formed Ag nanoparticles (AgNPs).

Fabrication of a Greener TiO2@Gum Arabic-Carbon Paste Electrode for the Electrochemical Detection of Pb2+ Ions in Plastic Toys.

A novel greener methodology is reported for the synthesis of titanium dioxide (TiO2) nanoparticles (NPs) using gum Arabic (Acacia senegal) and the characterization of the ensuing TiO2 NPs by various techniques such as X-ray diffraction (XRD), Fourier transform infrared, Raman spectroscopy, scanning electron microscopy-energy dispersive X-ray, transmission electron microscopy (TEM), high resolution-TEM, and UV-visible spectroscopy. The XRD analysis confirmed the formation of TiO2 NPs in the anatase phase with high crystal purity, while TEM confirmed the size to be 8.9 ± 1.5 nm with a spherical morphology. The electrode for the electrochemical detection of Pb2+ ions was modified by a carbon paste fabricated using the synthesized TiO2 NPs. Compared to the bare electrode, the fabricated electrode exhibited improved electro-catalytic activity toward the reduction of Pb2+ ions. The detection limit, quantification limit, and the sensitivity of the developed electrode were observed by using differential pulse voltammetry to be 506 ppb, 1.68 ppm, and 0.52 ± 0.01 µA µM-1, respectively. The constructed electrode was tested for the detection of lead content in plastic toys.

Rapid sunlight-driven mineralisation of dyes and fungicide in water by novel sulphur-doped graphene oxide/Ag3VO4 nanocomposite.

A semiconductor photocatalyst was prepared in facile, standard conditions by integrating 1% metal-free, sulphur-doped graphene oxide (sGO) as cocatalyst and Ag3VO4 as photocatalyst and characterised via spectroscopic, microscopic and voltammetric techniques. The catalytic activity was performed on notable water pollutants like textile dyes and fungicide employing various techniques. Cationic dyes such as methylene blue and rhodamine B were degraded > 99% with above 90% organic carbon content removal indicating total mineralisation while anionic dyes were degraded 75-80% in 1 h. For the first time, a dithiocarbamate fungicide thiram is degraded to give thiourea as a product in 1 h. Photocatalysis follows pseudo-first order kinetics with rate 3.67, 49.50 and 3.19 times higher than Ag3VO4, sGO and GO-Ag3VO4 respectively with excellent stability and recyclability. One percent sGO aided excellent carrier separation boosted by electrons and surface defects from sGO, morphology and n-n heterojunction formation. The catalyst efficiently removed 82.8% of the total organic carbon content of a real water sample from the textile mill under 2-h sunlight irradiation.

Anticancer, antimicrobial, antioxidant, and catalytic activities of green-synthesized silver and gold nanoparticles using Bauhinia purpurea leaf extract.

The synthesis of metal nanoparticles by green methods attained enormous attention in recent years due to its easiness, non-toxicity, and eco-friendly nature. In the present study, noble metal nanoparticles such as silver and gold were prepared using an aqueous leaf extract of a medicinal plant, Bauhinia purpurea. The leaf extract performed as both reducing and stabilizing agents for the development of nanoparticles. The formations of silver and gold nanoparticles were confirmed by observing the surface plasmon resonance peaks at 430 nm and 560 nm, respectively, in UV-Vis absorption spectrum. Various properties of nanoparticles were demonstrated using the characterization techniques such as FTIR, XRD, TEM, and EDX. The synthesized silver and gold nanoparticles had a momentous anticancer effect against lung carcinoma cell line A549 in a dose-dependent manner with IC50 values of 27.97 µg/mL and 36.39 µg/mL, respectively. The antimicrobial studies of synthesized nanoparticles were carried out by agar well diffusion method against six microbial strains. Silver and gold nanoparticles were also showed high antioxidant potentials with IC50 values of 42.37 µg/mL and 27.21 µg/mL, respectively; it was measured using DPPH assay. Additionally, the nanoparticles were observed to be good catalysts for the reduction of organic dyes.

Eco-friendly synthesis of silver and gold nanoparticles with enhanced antimicrobial, antioxidant, and catalytic activities.

The present work is emphasised on the bio-fabrication of silver and gold nanoparticles in a single step by a microwave-assisted method using the leaf extract of Synedrella nodiflora as both reducing and stabilising agent. The synthesised nanoparticles are highly stable and show surface plasmon resonance peak at 413 and 535 nm, respectively, for silver and gold nanoparticles in UV-Vis spectrum. The functional group responsible for the reduction of metal ions were obtained from Fourier transform infrared spectroscopy. The crystalline nature of nanoparticles with face-centred cubic geometry was confirmed by the X-ray diffraction and selected area electron diffraction patterns. The morphology and sizes of the silver and gold nanoparticles were obtained from transmission electron microscopy images. The nanoparticles exhibit effective antimicrobial activities against various pathogenic strains. These antimicrobial properties were analysed by employing agar well diffusion method. The nanoparticles show significant antioxidant properties, and it was determined using 2, 2-diphenyl-1-picrylhydrazyl assay. The nanoparticles also show potent catalytic activity in the degradation of anthropogenic pollutant dyes Congo red and eosin Y by excess NaBH4. Thus, the current study demonstrates the potential use of S. nodiflora as a reducing and stabilising agent for the synthesis of silver and gold nanoparticles and their relevance in the field of biomedicine and catalysis.

Metal oxide nanoparticles in electrochemical sensing and biosensing: a review.

This review (with (318) refs) describes progress made in the design and synthesis of morphologically different metal oxide nanoparticles made from iron, manganese, titanium, copper, zinc, zirconium, cobalt, nickel, tungsten, silver, and vanadium. It also covers respective composites and their function and application in the field of electrochemical and photoelectrochemical sensing of chemical and biochemical species. The proper incorporation of chemical functionalities into these nanomaterials warrants effective detection of target molecules including DNA hybridization and sensing of DNA or the formation of antigen/antibody complexes. Significant data are summarized in tables. The review concludes with a discussion or current challenge and future perspectives. Graphical abstract ᅟ.

Green silver-nanoparticle-based dual sensor for toxic Hg(II) ions.

The present study focuses on the utilization of green silver nanoparticles, as they are preferred for sensing applications due to their environmentally friendly nature. We have examined the optical and electrochemical sensing behavior of silver nanoparticles from Agaricus bisporus (AgNP-AB) towards Hg(II) ions. The AgNP-AB was prepared by microwave reactor. The synthesized AgNP was used for the sensing of Hg(II) ions without the use of modifiers or further sophisticated instrumentation. The synthesized nanoparticles were successfully characterized by different techniques. AgNP-AB leads to aggregation with the addition of Hg(II) ions in aqueous medium, and develops a color change from brown to black which leads to the formation of AgNP-AB-Hg(II) complex. Moreover, the metal sensing ability of AgNP has been explored using electrochemical studies. AgNP-AB modified platinum electrode (AgNP-AB/PE) was developed for the fast sensing of toxic Hg(II) ions. The sensor exhibits a good limit of detection at 2.1 × 10-6 M. The sensitivity of AgNP-AB/PE towards Hg(II) ions was analyzed with various metal ions. The sensing skill of the developed system was successfully checked with real water samples from Vembanade Lake, Kumarakom, Kerala. AgNP from A. bisporus is highly versatile and promising for different environmental applications.

Green synthesis of Stereospermum suaveolens capped silver and gold nanoparticles and assessment of their innate antioxidant, antimicrobial and antiproliferative activities.

Plant-extract mediated nanoparticles synthesis is a viable alternative to chemical reduction techniques. Here, we report the microwave-assisted rapid synthesis of silver and gold nanoparticles by the phytoreducer Stereospermum suaveolens for the first time. The formation of the nascent silver and gold nanoparticles is confirmed by their intense surface plasmon resonance peaks at 431 and 585 nm in UV-visible spectroscopy. The poly phenolic and alcoholic functional groups present in the aqueous root bark extract that performed the bioreduction processes have been detected using Fourier transform infrared spectroscopy. Powder X-ray diffraction and selected area electron diffraction patterns settled face centered cubic crystal structures to both silver and gold nanoparticles with a preferred orientation towards the (111) plane. Transmission electron microscopic analysis proved more or less spherical geometry of the silver and gold nanoparticles with average diameter of 49.77 ± 11.64 and 27.19 ± 5.96 nm, respectively. The nanoparticles showed excellent free-radical scavenging activity than the root bark extract Stereospermum suaveolens and the IC50 values obtained were 108.36 ± 1.62, 45.59 ± 0.18, 34.53 ± 0.31 µg/mL, respectively, for the extract, gold and silver nanoparticles. The metal nanoparticles have accomplished good antimicrobial properties towards bacterial and fungal pathogens and were demonstrated herein. The antiproliferative effects of the synthesized silver and gold nanoparticles on human lung adenocarcinoma cells A549 were studied using the MTT assay and the obtained IC50 values 33.81 ± 0.72 and 52.97 ± 0.73 µg/mL lies in the clinical range.

Indigofera tinctoria leaf extract mediated green synthesis of silver and gold nanoparticles and assessment of their anticancer, antimicrobial, antioxidant and catalytic properties.

This study reports the synthesis of noble metal nanoparticles, namely silver and gold from their respective salt by leaf extract of a medicinal plant Indigofera tinctoria. This leaf extract plays a dual role as stabilizing and reducing agent for the formation of nanoparticles. The synthesized silver and gold nanoparticles were characterized by UV-vis. spectroscopy, FTIR spectroscopy, XRD, TEM, EDX and AFM analysis. All these techniques confirm the formation of crystalline nanoparticles. The cytotoxic effect of I. tinctoria leaf extract and the nanoparticles were studied on lung cancer cell line A549. It was shown that the cell viability decreases with increasing concentration and nanoparticles has more toxic effect on cancer cell than the pure leaf extract. IC50 value of I. tinctoria leaf extract, AuNP and AgNP respectively, are 71.92 ± 0.76 µg/ml, 59.33 ± 0.57 µg/ml and 56.62 ± 0.86 µg/ml. Antimicrobial activities were tested against both bacterial and fungal strains by agar well diffusion method. The synthesized nanoparticles show high antimicrobial activities towards all tested microbial strains with varying degree. The antioxidant activities of synthesized nanoparticles were analysed by using DPPH method and found that nanoparticles show higher antioxidant activities than the leaf extract. Outstanding catalytic activities of nanoparticles were demonstrated by employing the reduction reactions of o/p-niroanilines by NaBH4.

Microwave assisted green synthesis of silver nanoparticles using leaf extract of elephantopus scaber and its environmental and biological applications.

The fabrication of spherical silver nanoparticles using the phytoreducing agent Elephantopus scaber is reported here. Irradiation of the reaction mixture under a domestic microwave oven enabled the formation of stable silver nanoparticles and was confirmed by UV-vis spectral portrait. Chemical components inherent in the aqueous leaf extract which reduces the monovalent silver were identified by FT-IR spectroscopy. The crystal structure of the synthesized nanoparticles was established as face centred cube by the powder XRD analysis. The TEM images suggest an average particle size of 37.86 nm to the silver nanoparticles. The prepared silver nanocatalysts can successfully reduce various organic nitro compounds, namely, 4-nitrophenol, 2-nitroaniline and 4-nitroaniline. The environmental pollution caused by dyes like eosin Y is effectively wiped off within a short span of time using the prepared nanocatalysts. The free radical quenching efficacy of the plant extract and the silver nanoparticles were checked by employing DPPH assay bestowing ascorbic acid reference. The potential of the nanoparticles as antimicrobials against six human disease causing pathogens were tested through the well diffusion pathway. The newly developed silver nanoparticles produced IC50 value 15.68 ± 0.15 µg/mL on human skin carcinoma cells, A375 and 65.49 ± 0.40 µg/mL on fibroblast cells, L929 when the cytotoxicity is studied employing MTT assay. Elephantopus scaber showed IC50 value 50.55 ± 0.17 µg/mL against A375 cells.

Green synthesis and characterization of gold and silver nanoparticles using Mussaenda glabrata leaf extract and their environmental applications to dye degradation.

Plant-derived nanomaterials opened a green approach in solving the current environment issues. Present study focused on rapid microwave-assisted synthesis and applications of gold and silver nanoparticles mediated by aqueous leaf extract of Mussaenda glabrata. The synthesized nanoparticles were characterized by UV-vis, FT-IR, powder XRD, energy-dispersive X-ray spectroscopy (EDX), transmission electron (TEM), and atomic force microscopic techniques (AFM). FCC crystal structure of both nanoparticles was confirmed by peaks corresponding to (111), (200), (220), and (311) planes in XRD spectra and bright circular spots in SAED pattern. IC50 values shown by gold and silver nanoparticles (44.1 ± 0.82 and 57.92 ± 1.33 µg/mL) reflected their high free radical scavenging potential. The synthesized gold and silver nanoparticles revealed their potency to inhibit pathogenic microorganisms Bacillus pumilus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Aspergillus niger, and Penicillium chrysogenum. Anthropogenic pollutants rhodamine B and methyl orange were effectively degraded from aquatic environment and waste water sewages of dye industries using the prepared nanocatalysts. The catalytic capacities of the synthesized nanoparticles were also exploited in the reduction of 4-nitrophenol. Graphical abstract.

Microwave assisted facile green synthesis of silver and gold nanocatalysts using the leaf extract of Aerva lanata.

Herein, we report a simple microwave assisted method for the green synthesis of silver and gold nanoparticles by the reduction of aqueous metal salt solutions using leaf extract of the medicinal plant Aerva lanata. UV-vis., FTIR, XRD, and HR-TEM studies were conducted to assure the formation of nanoparticles. XRD studies clearly confirmed the crystalline nature of the synthesized nanoparticles. From the HR-TEM images, the silver nanoparticles (AgNPs) were found to be more or less spherical and gold nanoparticles (AuNPs) were observed to be of different morphology with an average diameter of 18.62nm for silver and 17.97nm for gold nanoparticles. In order to evaluate the effect of microwave heating upon rate of formation, the synthesis was also conducted under ambient condition without the assistance of microwave radiation and the former method was found to be much faster than the later. The synthesized nanoparticles were used as nanocatalysts in the reduction of 4-nitrophenol to 4-aminophenol by NaBH4.