Characterizing organic particle impacts on inert metal surfaces: Foundations for capturing organic molecules during hypervelocity transits of Enceladus plumes.

The presence and accessibility of a sub-ice-surface saline ocean at Enceladus, together with geothermal activity and a rocky core, make it a compelling location to conduct further, in-depth, astrobiological investigations to probe for organic molecules indicative of extraterrestrial life. Cryovolcanic plumes in the south polar region of Enceladus enable the use of remote in situ sampling and analysis techniques. However, efficient plume sampling and the transportation of captured organic materials to an organic analyzer present unique challenges for an Enceladus mission. A systematic study, accelerating organic ice-particle simulants into soft inert metal targets at velocities ranging 0.5-3.0 km s-1, was carried out using a light gas gun to explore the efficacy of a plume capture instrument. Capture efficiency varied for different metal targets as a function of impact velocity and particle size. Importantly, organic chemical compounds remained chemically intact in particles captured at speeds up to ~2 km s-1. Calibration plots relating the velocity, crater, and particle diameter were established to facilitate future ice-particle impact experiments where the size of individual ice particles is unknown.

Evidence for a vibrational phase-dependent isotope effect on the photochemistry of vision.

Vibronic coupling is key to efficient energy flow in molecular systems and a critical component of most mechanisms invoking quantum effects in biological processes. Despite increasing evidence for coherent coupling of electronic states being mediated by vibrational motion, it is not clear how and to what degree properties associated with vibrational coherence such as phase and coupling of atomic motion can impact the efficiency of light-induced processes under natural, incoherent illumination. Here, we show that deuteration of the H11-C11=C12-H12 double-bond of the 11-cis retinal chromophore in the visual pigment rhodopsin significantly and unexpectedly alters the photoisomerization yield while inducing smaller changes in the ultrafast isomerization dynamics assignable to known isotope effects. Combination of these results with non-adiabatic molecular dynamics simulations reveals a vibrational phase-dependent isotope effect that we suggest is an intrinsic attribute of vibronically coherent photochemical processes.

Multiplexed efficient on-chip sample preparation and sensitive amplification-free detection of Ebola virus.

An automated microfluidic sample preparation multiplexer (SPM) has been developed and evaluated for Ebola virus detection. Metered air bubbles controlled by microvalves are used to improve bead-solution mixing thereby enhancing the hybridization of the target Ebola virus RNA with capture probes bound to the beads. The method uses thermally stable 4-formyl benzamide functionalized (4FB) magnetic beads rather than streptavidin coated beads with a high density of capture probes to improve the target capture efficiency. Exploiting an on-chip concentration protocol in the SPM and the single molecule detection capability of the antiresonant reflecting optical waveguide (ARROW) biosensor chip, a detection limit of 0.021pfu/mL for clinical samples is achieved without target amplification. This RNA target capture efficiency is two orders of magnitude higher than previous results using streptavidin beads and the limit of detection (LOD) improves 10×. The wide dynamic range of this technique covers the whole clinically applicable concentration range. In addition, the current sample preparation time is ~1h which is eight times faster than previous work. This multiplexed, miniaturized sample preparation microdevice establishes a key technology that intended to develop next generation point-of-care (POC) detection system.

Optofluidic analysis system for amplification-free, direct detection of Ebola infection.

The massive outbreak of highly lethal Ebola hemorrhagic fever in West Africa illustrates the urgent need for diagnostic instruments that can identify and quantify infections rapidly, accurately, and with low complexity. Here, we report on-chip sample preparation, amplification-free detection and quantification of Ebola virus on clinical samples using hybrid optofluidic integration. Sample preparation and target preconcentration are implemented on a PDMS-based microfluidic chip (automaton), followed by single nucleic acid fluorescence detection in liquid-core optical waveguides on a silicon chip in under ten minutes. We demonstrate excellent specificity, a limit of detection of 0.2 pfu/mL and a dynamic range of thirteen orders of magnitude, far outperforming other amplification-free methods. This chip-scale approach and reduced complexity compared to gold standard RT-PCR methods is ideal for portable instruments that can provide immediate diagnosis and continued monitoring of infectious diseases at the point-of-care.

Integration of programmable microfluidics and on-chip fluorescence detection for biosensing applications.

We describe the integration of an actively controlled programmable microfluidic sample processor with on-chip optical fluorescence detection to create a single, hybrid sensor system. An array of lifting gate microvalves (automaton) is fabricated with soft lithography, which is reconfigurably joined to a liquid-core, anti-resonant reflecting optical waveguide (ARROW) silicon chip fabricated with conventional microfabrication. In the automaton, various sample handling steps such as mixing, transporting, splitting, isolating, and storing are achieved rapidly and precisely to detect viral nucleic acid targets, while the optofluidic chip provides single particle detection sensitivity using integrated optics. Specifically, an assay for detection of viral nucleic acid targets is implemented. Labeled target nucleic acids are first captured and isolated on magnetic microbeads in the automaton, followed by optical detection of single beads on the ARROW chip. The combination of automated microfluidic sample preparation and highly sensitive optical detection opens possibilities for portable instruments for point-of-use analysis of minute, low concentration biological samples.

Accuracy of MDCT in the determination of supraaortic artery stenosis using DSA as the reference standard.

PURPOSE: Accurate stenosis quantification in the carotid arteries is of great clinical importance. We aimed to compare the diagnostic accuracy of multi-slice computed tomography angiography (CTA) to digital subtraction angiography (DSA) for the detection and grading of atherosclerotic lesions involving the supraaortic arteries. MATERIALS AND METHODS: We retrospectively analyzed 30 patients (10 women; mean age, 67 years). CTA was performed after administration of 100 ml Ultravist 370 (Bayer Schering, Germany), at a flow of 5 ml/s, using a Philips Brilliance 16MDCT scanner (Philips, Best, Netherland) at a collimation of 16 mm×0.75 mm prior to DSA. The supraaortic arteries were divided into 17 segments, and, within each segment, the presence and severity of stenotic or occlusive lesions was determined, based on a four-point scale (0-49%, 50-69%, 70-99%, occlusion), by four independent readers using the NASCET criteria. Sensitivity and specificity of MDCT was calculated for the detection of moderate (50-69%) versus significant stenoses (70-99%) and occlusion. RESULTS: There were 291 segments assessed with both methods. Thirteen lesions were "not assessable" on CTA. DSA identified 53 significant lesions, and CTA 56 significant lesions. With regard to significant lesions, CTA overrated six lesions and underestimated six lesions, resulting in a sensitivity, specificity, and accuracy of 86.4%, 97.6%, and 95.9%, respectively. For the detection of stenoses greater than 50%, sensitivity, specificity, and accuracy were 90.2%, 95.8%, and 94.8%, respectively. CONCLUSIONS: Compared to DSA, CTA shows high accuracy in the detection and grading of lesions involving the supraaortic arteries enabling its use in the detection and treatment planning for stenoses of the supraaortic vessels.

[Angiospastic occlusion of the superficial femoral artery by chronic ergotamine intake]. / Vasospastischer Verschluss der Arteria femoralis superficialis nach chronischem Ergotaminkonsum.

HISTORY AND CLINICAL FINDINGS: A 42- year old women with a long history of migraine presented with burning pain of the limbs and reduced walking distance. No risk factors for peripheral arterial occlusive disease were present. Her daily medication included an ergotamine-containing-combination (2 mg ergotamine tartrate, 100 mg caffeine daily). INVESTIGATIONS: On examination both limbs were found to be cool and pulseless below the knee. The peripheral Doppler pressure indicated a bilaterally reduced ankle-brachial index. Color-coded duplex sonography showed constricted vessels and long stenosis with a decreased echo from the wall of the left and a distal occlusion of the right femoral artery without atherosclerotic changes. A diagnosis of ergotism was made and an arteriography was omitted because of the typical findings. TREATMENT AND COURSE: A detoxication treatment was initiated and optional intravenous prostaglandine E1 recommended if the condition did not improve. 23 days later the Doppler pressure and the Duplex sonography had become normal and showed spontaneous revascularization of the previously occluded right femoral artery, although collateral vessels were still detectable. CONCLUSION: Nowadays iatrogenic ergotism of the limbs is a rare diagnosis. An exact medical history and typical duplex sonographic findings confirm the diagnosis even if characteristic risk factors are missing. The first therapeutic measure in case of claudication is for ergotamine to be stopped. In case of critical ischaemia or gangrene immediate vasodilator therapy, e. g. with prostaglandine E1, is indicated.

Microfluidic genetic analysis with an integrated a-Si:H detector.

We have developed an integrated hydrogenated amorphous silicon (a-Si:H) fluorescence detector for microfluidic genetic analysis. It consists of a half-ball lens, a ZnS/YF3 multilayer optical interference filter with a pinhole, and an annular a-Si:H PIN photodiode allowing the laser excitation to pass up through the central aperture in the photodiode and the filter. Microfluidic separations of multiplex PCR products generated from methicillin-resistant/sensitive Staphylococcus aureus (MRSA/MSSA) DNA on microfluidic capillary electrophoresis (CE) devices are successfully detected with the integrated detector. Similarly, multiplex PCR amplicons from the kanamycin resistant and K12 serotype-specific genes of E. coli cells are detected. The direct detection of multiplex PCR amplicons indicates that the fluorescence detector can be successfully coupled with current microfluidic PCR-CE platforms. This work establishes that the integrated a-Si:H detector provides relevant limits of detection for point-of-care genetic and pathogen analysis with microfluidic devices.

Integrated portable genetic analysis microsystem for pathogen/infectious disease detection.

An integrated portable genetic analysis microsystem including PCR amplification and capillary electrophoretic (CE) analysis coupled with a compact instrument for electrical control and laser-excited fluorescence detection has been developed. The microdevice contains microfabricated heaters, temperature sensors, and membrane valves to provide controlled sample positioning and immobilization in 200-nL PCR chambers. The instrument incorporates a solid-state laser and confocal fluorescence detection optics, electronics for sensing and powering the PCR reactor, and high-voltage power supplies for conducting CE separations. The fluorescein-labeled PCR products are amplified and electrophoretically analyzed in a gel-filled microchannel in <10 min. We demonstrate the utility of this instrument by performing pathogen detection and genotyping directly from whole Escherichia coli and Staphylococcus aureus cells. The E. coli detection assay consists of a triplex PCR amplification targeting genes that encode 16S ribosomal RNA, the fliC flagellar antigen, and the sltI shigatoxin. Serial dilution demonstrates a limit of detection of 2-3 bacterial cells. The S. aureus assay uses a femA marker to identify cells as S. aureus and a mecA marker to probe for methicillin resistance. This integrated portable genomic analysis microsystem demonstrates the feasibility of performing rapid high-quality detection of pathogens and their antimicrobial drug resistance.

High-pressure gel loader for capillary array electrophoresis microchannel plates.

Microfabricated capillary array electrophoresis (microCAE) microchannel plates are the next generation of bioanalytical separation devices. To fully exploit the capabilities of microCAE devices, supporting technology such as robotic sample loading, gel loading, microplate washing, and data analysis must be developed. Here, we describe a device for loading gel into radial capillary array electrophoresis microplates and for plate washing and drying. The microplates are locked into a loading module, and high-pressure helium is used to drive aqueous separation media or wash solutions into the microchannels through fixtures connected to the central anode reservoir. Microplates are rapidly (30 s to 5 min) loaded with separation media, such as 3%-4.8% linear polyacrylamide or 0.7%-3.0% hydroxyethyl cellulose, for electrophoresis. The effective and rapid gel-filling and plate-cleaning methods together with short electrophoretic analysis times (2-30 min) make microCAE systems versatile and powerful nucleic acid analysis platforms.

High-performance genetic analysis using microfabricated capillary array electrophoresis microplates.

This review focuses on some recent advances in realizing microfabricated capillary array electrophoresis (microCAE). In particular, the development of a novel rotary scanning confocal fluorescence detector has facilitated the high-speed collection of sequencing and genotyping data from radially formatted microCAE devices. The concomitant development of a convenient energy-transfer cassette labeling chemistry allows sensitive multicolor labeling of any DNA genotyping or sequencing analyte. High-performance hereditary haemochromatosis and short tandem repeat genotyping assays are demonstrated on these devices along with rapid mitochondrial DNA sequence polymorphism analysis. Progress in supporting technology such as robotic fluid dispensing and batched data analysis is also presented. The ultimate goal is to develop a parallel analysis platform capable of integrated sample preparation and automated electrophoretic analysis with a throughput 10-100 times that of current technology.

Wavelength dependent cis-trans isomerization in vision.

The primary event in vision is the light-driven cis-trans isomerization of the 11-cis-retinal chromophore in the G-protein coupled receptor rhodopsin. Early measurements showed that this photoisomerization has a reaction quantum yield phi of approximately 0.67 [Dartnall (1936) Proc. R. Soc. A 156, 158-170; Dartnall (1968) Vision Res. 8, 339-358] and suggested that the quantum yield was wavelength independent [Schneider (1939) Proc. Natl. Acad. Sci. U.S.A. 170, 102-112]. Here we more accurately determine phi(500) = 0.65 +/- 0.01 and reveal that phi surprisingly depends on the wavelength of the incident light. Although there is no difference in the quantum yield between 450 and 480 nm, the quantum yield falls significantly as the photon energy is reduced below 20 000 cm(-1) (500 nm). At the reddest wavelength measured (570 nm), the quantum yield is reduced by 5 +/- 1% relative to the 500 nm value. These experiments correct the long-held presumption that the quantum yield in vision is wavelength independent, and support the hypothesis that the 200 fs photoisomerization reaction that initiates vision is dictated by nonstationary excited-state vibrational wave packet dynamics.

Genotyping energy-transfer-cassette-labeled short-tandem-repeat amplicons with capillary array electrophoresis microchannel plates.

BACKGROUND: Genetic analysis of microsatellite DNA is a powerful tool used in linkage analysis, gene mapping, and clinical diagnosis. To address the expanding needs of studies of short tandem repeats (STRs), we demonstrated high-performance STR analysis on a high-throughput microchannel plate-based platform. METHODS: Energy-transfer-cassette-labeled STR amplicons were separated and typed on a microfabricated 96-channel radial capillary array electrophoresis (CAE) microchannel plate system. Four-color detection was accomplished with a laser-excited confocal fluorescence rotary scanner. RESULTS: Multiplex STR analysis with single base-pair resolution was demonstrated on denaturing polyacrylamide gel media. The high-throughput multiplex capabilities of this genetic analysis platform were demonstrated by the simultaneous separation of STR amplicons representing 122 samples in ninety-six 5.5-cm-long channels in <8 min. Sizing values obtained for these amplicons on the CAE microchannel plate were comparable to those measured on a conventional commercial CAE instrument and exhibit <1% sizing variance. CONCLUSIONS: Energy-transfer-cassette labeling and microfabricated CAE microchannel plates allow high-performance multiplex STR analyses.

Microfabricated capillary array electrophoresis DNA analysis systems.

Microfabricated "laboratory-on-a-chip" systems are revolutionizing all aspects of genetic analysis. The development of capillary array electrophoresis (CAE) microchannel plate devices makes possible the performance of 96 or more high-speed separations in parallel on a single wafer-scale device. The fluorescently labeled DNA samples are detected within the microchannels with a novel four-color rotary confocal fluorescence scanner. The capabilities of this system for genotyping are demonstrated through multiplex separations of short tandem repeat and hereditary haemochromatosis allele-specific amplicons. Furthermore, with newly developed folded channel designs that maintain high resolution, these CAE microplate systems are used to perform 96 high-quality DNA sequencing separations in parallel to approximately 500 bases per capillary in less than 30 min. These densely packed microfabricated device technologies will facilitate the even more rapid collection of vast amounts of genetic data in the future.

Energy-transfer cassette labeling for capillary array electrophoresis short tandem repeat DNA fragment sizing.

Energy-transfer (ET) dye-labeled primers significantly improve fluorescent DNA detection because they permit excitation at a single common wavelength and they produce well separated and intense acceptor dye emission. Recently, a new ET cassette technology was developed [Berti, L. et al. (2001) Anal. Biochem. 292, 188-197] that can be used to label any PCR, sequencing, or other primer of interest. In this report we examine the utility of this ET cassette technology by labeling seven different short tandem repeat (STR) specific primers with each of the four ET cassettes and analyzing the PCR products generated on a MegaBACE-1000 capillary array electrophoresis system. More than 60 amplicons were generated and successfully analyzed with the ET cassette-labeled primers. Both forward and reverse primers were labeled for multiplex PCR amplification and analysis. Single base pair resolution was achieved with all four ET cassettes. This ET cassette-primer labeling procedure is ideally suited for creating four-color fluorescent ET primers for STR and other DNA assays where large numbers of different loci are analyzed including sequencing, genetic identification, gene mapping, loss of heterozygosity testing, and linkage analysis.

Chromophore structure in lumirhodopsin and metarhodopsin I by time-resolved resonance Raman microchip spectroscopy.

Time-resolved resonance Raman microchip flow experiments have been performed on the lumirhodopsin (Lumi) and metarhodopsin I (Meta I) photointermediates of rhodopsin at room temperature to elucidate the structure of the chromophore in each species as well as changes in protein-chromophore interactions. Transient Raman spectra of Lumi and Meta I with delay times of 16 micros and 1 ms, respectively, are obtained by using a microprobe system to focus displaced pump and probe laser beams in a microfabricated flow channel and to detect the scattering. The fingerprint modes of both species are very similar and characteristic of an all-trans chromophore. Lumi exhibits a relatively normal hydrogen-out-of-plane (HOOP) doublet at 951/959 cm(-1), while Meta I has a single HOOP band at 957 cm(-1). These results suggest that the transitions from bathorhodopsin to Lumi and Meta I involve a relaxation of the chromophore to a more planar all-trans conformation and the elimination of the structural perturbation that uncouples the 11H and 12H wags in bathorhodopsin. Surprisingly, the protonated Schiff base C=N stretching mode in Lumi (1638 cm(-1)) is unusually low compared to those in rhodopsin and bathorhodopsin, and the C=ND stretching mode shifts down by only 7 cm(-1) in D2O buffer. This indicates that the Schiff base hydrogen bonding is dramatically weakened in the bathorhodopsin to Lumi transition. However, the C=N stretching mode in Meta I is found at 1654 cm(-1) and exhibits a normal deuteration-induced downshift of 24 cm(-1), identical to that of the all-trans protonated Schiff base. The structural relaxation of the chromophore-protein complex in the bathorhodopsin to Lumi transition thus appears to drive the Schiff base group out of its hydrogen-bonded environment near Glu113, and the hydrogen bonding recovers to a normal solvated PSB value but presumably a different hydrogen bond acceptor with the formation of Meta I.

Energy transfer cassettes for facile labeling of sequencing and PCR primers.

Fluorescence energy transfer (ET) primers and terminators are the reagents of choice for multiplex DNA sequencing and analysis. We present here the design, synthesis and evaluation of a four-color set of ET cassettes, fluorescent labeling reagents that can be quantitatively coupled to a thiol-activated target through a disulfide exchange reaction. The ET cassette consists of a sugar-phosphate spacer with a FAM donor at the 3'-end, an acceptor linked to a modified T-base at the 5'-end of the spacer and a mixed disulfide for coupling to a thiol at the 5'-end. The acceptor dye emission intensities of ET labeled primers produced in this manner are comparable to commercial ET primers. The utility of our ET cassette-labeled primers is demonstrated by performing four-color capillary electrophoresis sequencing with the M13(-21)forward primer and by generating and analyzing a set of single-nucleotide-polymorphism-specific PCR amplicons.

High-performance multiplex SNP analysis of three hemochromatosis-related mutations with capillary array electrophoresis microplates.

An assay is described for high-throughput single nucleotide polymorphism (SNP) genotyping on a microfabricated capillary array electrophoresis (CAE) microchip. The assay targets the three common variants at the HFE locus associated with the genetic disease hereditary hemochromatosis (HHC). The assay employs allele-specific PCR (ASPCR) for the C282Y (845g->a), H63D (187c->g), and S65C (193a->t) variants using fluorescently-labeled energy-transfer (ET) allele-specific primers. Using a 96-channel radial CAE microplate, the labeled ASPCR products generated from 96 samples in a reference Caucasian population are simultaneously separated with single-base-pair resolution and genotyped in under 10 min. Detection is accomplished with a laser-excited rotary four-color fluorescence scanner. The allele-specific amplicons are differentiated on the basis of both their size and the color of the label emission. This study is the first demonstration of the combined use of ASPCR with ET primers and microfabricated radial CAE microplates to perform multiplex SNP analyses in a clinically relevant population.

Conversion of capillary electrophoresis microchip genotyping data for analysis with Genetic Profiler software.

The collection and conversion of 4-color fluorescent genotyping data from capillary array electrophoresis microchip devices and its conversion to a format easily and rapidly analyzed by Genetic Profiler genotyping software is presented. Microchip fluorescence intensity data are acquired and stored as 4-color tab-delimited text. These files are converted to electrophoretic signal data (ESD) files using a utility program (TEXT-to-ESD) written in C. TEXT-to-ESD generates an ESD file by converting text data to binary data and then appending a 632-byte ESD-file trailer. Up to 96 ESD files are then assembled into a run folder and imported into Genetic Profiler, where data are reduced to 4-color electropherograms and analyzed. In this manner, DNA fragment sizing data acquired with our high-speed electrophoretic microchip devices can be rapidly analyzed using robust commercial software. Additionally, the conversion program allows sizing of data with Genetic Profiler that have been preprocessed using other third-party software, such as BaseFinder.