Autogenous tooth bone graft material prepared chairside and its clinical applications: a systematic review.

This systematic review was conducted to evaluate the available literature on the clinical outcomes of the use of autogenous tooth bone graft prepared chairside, and its current applications. A literature search was done to answer the focused questions "In partially edentulous patients, what are the alveolar ridge volumetric changes, histological findings, and implant survival rates in sites augmented with autogenous tooth bone graft prepared chairside?" Twenty articles were included at the end of the database search. Reported alveolar bone dimension changes after ridge preservation ranged between - 0.64 mm and + 2.26 mm for height, and between - 1.21 mm and + 0.41 mm for width. Augmented sites showed a significant increase in their dimensions in all investigations. The implant survival rate was 98.8% for delayed placement and 97.4% for immediate placement. Additional reports were found on the percentage bone formation following the use of this graft at different postoperative time points, which showed a higher bone volume with time. Currently available studies have included small samples, with short follow-up periods, and most have lacked a control group. Within the limitations of this review, the available evidence suggests that the autogenous tooth bone graft prepared chairside is as effective as other bone grafting materials.

Comparison of the accuracy of implant position among freehand implant placement, static and dynamic computer-assisted implant surgery in fully edentulous patients: a non-randomized prospective study.

The optimal implant position is a critical factor for long-term success in fully edentulous patients. Implants can be placed through conventional freehand, static computer-assisted implant surgery (CAIS), or dynamic CAIS protocols, but at present there is very limited clinical evidence on their accuracy in fully edentulous patients. This study was performed to evaluate the accuracy of implant placement using three protocols in fully edentulous patients. Thirteen patients received 60 implants with the freehand (n = 20), static CAIS (n = 20), or dynamic CAIS (n = 20) protocol. Postoperative cone beam computed tomography was utilized to evaluate the accuracy of implant placement in relation to the planned optimal position. The data were analysed by ANCOVA followed by Bonferroni analysis. The mean angular deviation (standard deviation) in the freehand, static CAIS, and dynamic CAIS groups was 10.09° (4.64°), 4.98° (2.16°), and 5.75° (2.09°), respectively. The mean three-dimensional deviation (standard deviation) at the implant platform in the freehand, static CAIS, and dynamic CAIS groups was 3.48 (2.00) mm, 1.40 (0.72) mm, and 1.73 (0.43) mm, while at the implant apex it was 3.60 (2.11) mm, 1.66 (0.61) mm, and 1.86 (0.82) mm, respectively. No difference in terms of accuracy was found between static and dynamic CAIS; both demonstrated significantly higher accuracy when compared to the freehand protocol in fully edentulous patients.

The effect of acemannan in implant placement with simultaneous guided bone regeneration in the aesthetic zone: a randomized controlled trial.

Acemannan, a linear polysaccharide produced by Aloe vera, has been shown to have important biological effects promoting wound healing and tissue regeneration. The aim of this randomized clinical trial was to investigate the impact of acemannan in guided bone regeneration (GBR) with simultaneous implant placement. Twenty patients were randomly allocated to a test group (deproteinized bovine bone with particulate acemannan (mean size 32.45 µm)) and a control group (deproteinized bovine bone only). Twenty implants were placed with simultaneous GBR. Radiographic measurements were conducted on cone beam computed tomography (CBCT) scans immediately post-surgery and at 3 and 6 months. Vertical and horizontal dimensions of the buccal bone were measured at the implant platform (0) and at points 2, 4, 6, and 8 mm apically. The dimensional reduction of vertical and horizontal buccal bone was significantly smaller in the test group at 3 months postoperative (P < 0.05) at every position measured (0, 2, 4, 6, 8 mm), but the difference was not statistically significant at 6 months. Acemannan was found to be a safe and predictable biomaterial for GBR, which resulted in enhanced dimensional stability of the regenerated tissue at 3 months. However, these results were not replicated at 6 months. Further studies are required to document the long-term efficacy and potential of acemannan use as a supplement in bone regeneration.

Dentists' Attitudes Toward Dental Implant Maintenance in Thailand.

INTRODUCTION: As implant therapy is a widely applied treatment modality, general dentists are in the frontline of maintaining health in patients with implants. It is however unknown to what extent general dentists are competent and feel prepared to deliver maintenance of implants to patients. OBJECTIVES: The aim of this study was to investigate the attitudes and self-reported and objectively assessed competences of general dentists with maintenance of dental implants in patients. METHODS: A questionnaire designed and validated for the purpose of the study, including attitudes and self-reported and objectively assessed competences, was distributed by means of an online platform. RESULTS: Data from 429 questionnaires were included in the study. Half of the participants were 28 to 33 y old and 78% had been working <10 y. Seventy-eight percent believed that dental implant maintenance should be performed by general dentists, but only 51% were prepared to do this, citing obstacles such as insufficient knowledge and limitations of their working environment. The mean ± SD objectively assessed competence score was 8.97 ± 2.74 of 17. There were significant differences (P < 0.001, 1-way analysis of variance) in the scores among dentists who offered the full range of maintenance and management of complications (10.83 ± 2.45) with those willing to provide comprehensive oral examination and implant maintenance only (9.31 ± 2.73), those offering comprehensive examination but unwilling to conduct maintenance (8.22 ± 2.28), and those who refer all dental implant patients elsewhere (7.2 ± 2.66). Around half of the dentists believed that implants last for life. CONCLUSIONS: While general dentists appeared to largely acknowledge the importance of providing implant maintenance care and present with positive attitudes, a large portion was unwilling to engage with maintenance of implants in patients and appeared to lack essential competences to this end. The main obstacles for providing implant maintenance care included insufficient knowledge and lack of a properly equipped clinical environment. KNOWLEDGE TRANSFER STATEMENT: The results of this study can identify deficiencies in the currently available maintenance competences and schemes for patients with implants. These results can also help dental professionals, scientific bodies, and associations to design appropriate education and professional development strategies that can strengthen the confidence and competences of general dentists, thus offering better service to the public.

Accuracy of implant position when placed using static computer-assisted implant surgical guides manufactured with two different optical scanning techniques: a randomized clinical trial.

Data from cone beam computed tomography (CBCT) and optical scans (intraoral or model scanner) are required for computer-assisted implant surgery (CAIS). This study compared the accuracy of implant position when placed with CAIS guides produced by intraoral and extraoral (model) scanning. Forty-seven patients received 60 single implants by means of CAIS. Each implant was randomly assigned to either the intraoral group (n=30) (Trios Scanner, 3Shape) or extraoral group (n=30), in which stereolithographic surgical guides were manufactured after conventional impression and extraoral scanning of the stone model (D900L Lab Scanner, 3Shape). CBCT and surface scan data were imported into coDiagnostiX software for virtual implant position planning and surgical guide design. Postoperative CBCT scans were obtained. Software was used to compare the deviation between the planned and final positions. Average deviation for the intraoral vs. model scan groups was 2.42°±1.47° vs. 3.23°±2.09° for implant angle, 0.87±0.49mm vs. 1.01±0.56mm for implant platform, and 1.10±0.53mm vs. 1.38±0.68mm for implant apex; there was no statistically significant difference between the groups (P>0.05). CAIS conducted with stereolithographic guides manufactured by means of intraoral or extraoral scans appears to result in equal accuracy of implant positioning.

Peri-implant inflammation and marginal bone level changes around dental implants in relation to proximity with and bone level of adjacent teeth.

OBJECTIVES: This retrospective study assessed radiographic bone changes and prevalence of inflammation around teeth and neighbouring implants supporting a single-unit fixed dental prosthesis (FDP), in relation to implant- positioning and characteristics. MATERIAL AND METHODS: Patients with an implant-supported FDP in function for at least 1 year were recruited. The radiographic horizontal and vertical position of the implants were identified. Probing depth (PD), bleeding on probing (BOP) and radiographic bone level around implants and adjacent teeth at the time of placement, prosthesis delivery, and the most recent review were assessed. RESULTS: 98 patients with 195 implants were evaluated for a mean of 37.8 months. Survival rate was 99.6% and success ranged from 31.3% to 91.3% when different success criteria were utilized. Significantly greater interproximal bone loss around teeth and higher prevalence of interproximal peri-implant inflammation occurred when the horizontal distance of BL implants was <1 mm, but not with TL implants. There was no significant impact of the corono-apical positioning of the implants on marginal bone loss. CONCLUSION: Proximity of implants to adjacent teeth of <1 mm leads to increased prevalence of inflammation and interproximal bone resorption at the teeth adjacent to bone level implants.

Can resonance frequency analysis detect narrow marginal bone defects around dental implants? An ex vivo animal pilot study.

BACKGROUND: Resonance frequency analysis (RFA) is applied to assess implant stability, as expressed by the implant stability quotient (ISQ). This study aimed to investigate the potential of RFA devices to identify narrow marginal bone defects around implants. METHODS: Twenty-eight Straumann bone level (BL) implants and 28 bone level tapered (BLT) implants were placed ex vivo in porcine ribs. Implants in the control group (A) were fully submerged in the bone. In three experimental groups, implants were placed with a 0.9-mm circumferential marginal bone defect extending 2 mm (B), 4 mm (C) and 6 mm (D) apically. Two RFA devices were used to measure implant stability. RESULTS: ISQ values decreased as the defects' depth increased, with the greatest reduction observed between full bone (A) and 2-mm defects (B) (P < 0.001). No significant differences were found in the ISQ values recorded from BL and BLT implants. CONCLUSIONS: ISQ values can effectively detect narrow, intrabony marginal bone defects, in particular when involving the first coronal 2 mm. This finding could have implications for the early diagnosis of conditions affecting the marginal bone, such as peri-implantitis. Further research is required to investigate if such findings can be replicated after osseointegration is achieved.

Micromorphological differences of the implant-abutment junction and in vitro load testing for three different titanium abutments on Straumann tissue level implants.

BACKGROUND: The aim of this study was to investigate the micromorphological differences among three commercially available titanium abutments on Straumann implants. Furthermore, the possible impact of functional loading on the micromorphology and potential complications was investigated with the use of in vitro testing. MATERIAL AND METHODS: Three groups of Titanium abutments (A: Straumann Variobase n = 5, B: EBI best Duo n = 5, and C: Implant Direct n = 5) were torqued on Straumann RN implants, as according to each of the manufacturer's instructions. The implant-abutment units were scanned with Micro-CT. Three units of each group were directly sliced in the microtome and photographed under different magnifications (10×-500×) through a Scanning Electron Microscope. Six units (two from each group) were restored with cement-retained crowns, subjected to 2000,000 load cycles with loads between 30 and 300 N at 2 Hz, examined through Micro-CT and finally sliced and photographed as described above. The micromorphology of each unit was studied, and the total length of tight contact (<3 µm) was calculated between the implant, abutment and screw contact areas. RESULTS: Major morphological differences were identified between the three units, as well as differences in the extent of tight contact in all areas examined. Despite the morphological differences, the 2M cycles of loading via in vitro test did not result in any noticeable complications although some changes in the micromorphology were observed. CONCLUSION: The examined implant-abutment units presented with major morphological differences. Two million cycles of in vitro loading did not appear to affect the stability of the units despite the micromorphological changes. These results need to be interpreted however under the limitations of the small sample size and the specific set-up of the in vitro testing.

Salivary microbiome of an urban Indian cohort and patterns linked to subclinical inflammation.

OBJECTIVE: To profile salivary microbiomes of an urban-living, healthy Indian cohort and explore associations with proinflammatory status. METHODS: Fifty-one clinically healthy Indian subjects' salivary microbiomes were analyzed using 16S rRNA Illumina MiSeq sequencing. Community distribution was compared with salivary data from the Human Microbiome Project (HMP). Indian subjects were clustered using microbiome-based "partitioning along medoids" (PAM), and relationships of interleukin-1 beta levels with community composition were analyzed. RESULTS: Indian subjects presented higher phylogenetic diversity than HMP. Several taxa associated with traditional societies gut microbiomes (Bacteroidales, Paraprevotellaceae, and Spirochaetaceae) were raised. Bifidobacteriaceae and Lactobacillaceae were approximately fourfold greater. A PAM cluster enriched in several Proteobacteria, Actinobacteria, and Bacilli taxa and having almost twofold higher Prevotella to Bacteroides ratio showed significant overrepresentation of subjects within the highest quartile of salivary interleukin-1 beta levels. Abiotrophia, Anaerobacillus, Micrococcus, Aggregatibacter, Halomonas, Propionivivrio, Paracoccus, Mannhemia, unclassified Bradyrhizobiaceae, and Caulobacteraceae were each significant indicators of presence in the highest interleukin-1 beta quartile. 2 OTUs representing Lactobacillus fermentum and Cardiobacterium hominis significantly correlated with interleukin-1 beta levels. CONCLUSION: The salivary microbiome of this urban-dwelling Indian cohort differed significantly from that of a well-studied Western cohort. Specific community patterns were putatively associated with subclinical inflammation levels.

In vivo osteoprotegerin gene therapy preventing bone loss induced by periodontitis.

OBJECTIVE: The objective of this study was to investigate the effects of osteoprotegerin (OPG) gene therapy on alveolar bone resorption caused by experimental periodontitis in rats, thus forming a foundation for potential clinical applications of OPG gene therapy in the treatment of periodontitis and peri-implantitis. MATERIAL AND METHODS: To study the effects of OPG on alveolar bone protection, an experimental periodontitis model was used by placing a bacterial plaque retentive silk ligature in the gingival sulcus around the maxillary second molar tooth, injection of Porphyromonas gingivalis and high carbohydrate diet. A total of 30 Sprague-Dawley rats were randomly divided into three groups, with 10 rats in each group: group I (control) was treated with 10 µL normal saline injection; group II with 10 µL mock vector; and group III with 10 µL local OPG gene transfer by transfection with in vitro constructed pcDNA3.1-human OPG (pcDNA3.1-hOPG). A subperiosteal injection was done adjacent to the second molars on days 0, 7, 14 and 21. Four weeks later, all animals were killed and radiographic, histological and immunohistochemical examinations were performed. Statistical analysis included ANOVA and LSD-Bonferroni test. RESULTS: Group III (OPG gene therapy) had significantly enhanced (p < 0.05) integrated optical density of OPG, had significantly decreased alveolar bone resorption volume and active osteoclast number (p < 0.05) through descriptive histological examination when compared with the other two groups at week 4. CONCLUSION: Local recombinant OPG plasmid-mediated gene therapy suppresses osteoclastogenesis in vivo and inhibits alveolar bone height reduction caused by experimental periodontitis in rats. OPG gene therapy may be beneficial in preventing progressive periodontal bone loss.

Current perspectives on the role of ridge (socket) preservation procedures in dental implant treatment in the aesthetic zone.

Augmentation of the extraction socket (ridge preservation) is increasingly being advocated in anticipation of implant placement. The aim of this article is to review the available evidence with regards to ridge preservation procedures, investigating whether these techniques improve dental implant treatment outcomes. Evidence is examined to compare these techniques to other treatment alternatives such as implant placement with simultaneous lateral augmentation. An electronic PubMed search was conducted using search terms relevant to assessing treatment outcomes in association with ridge preservation. Titles were screened and full text obtained where relevant. Further full text articles were obtained from analysis of those papers yielded from the original search. Twenty-two papers were finally selected for analysis. Ridge preservation techniques are effective in minimizing post-extraction alveolar ridge contraction. However, there is insufficient evidence to suggest that the use of these techniques in conjunction with dental implant treatment improves implant treatment outcomes. Furthermore, ridge preservation does not necessarily eliminate the need for further simultaneous augmentation at the time of implant placement. The delayed healing associated with ridge preservation using socket grafting necessitates a commitment to a delayed placement protocol. The extended treatment time, compromised healing and expense related to ridge preservation suggests a more cautious approach with regards to the indication of such techniques.

Developing implant dentistry education in Europe: the continuum from undergraduate to postgraduate education and continuing professional development.

INTRODUCTION: Implant dentistry is a treatment modality which has mainstream clinical practice of comprehensive care, which however is not adequately represented in the undergraduate dental curricula. A consensus workshop organised by ADEE in 2008, set the benchmarks for the knowledge and competences a modern dental practitioner must possess with regard to implant dentistry, as well as defined undergraduate and postgraduate pathways for the acquisition of these competences. Today, 5 years later, there exist several challenges for the implementation of these benchmarks in both undergraduate curricula but also post-graduation educational pathways. METHODS: A consensus workshop was organised by ADEE, bringing together 48 opinion leaders, including academic teachers of all disciplines related to implant dentistry, specialists, representatives of relevant scientific and professional associations, as well as industry delegates. The objectives of the workshop were to evaluate the existing scientific literature, reported experience and best practices in order to identify potential and limitations for the implementation of implant dentistry in the undergraduate curriculum, as well produce recommendations for the optimal educational structures for postgraduate programmes and continuing professional development. RESULTS: The scientific committee conducted two European-wide questionnaire surveys to better document the current state of education in implant dentistry. Upon completion of the surveys, reviewers were appointed to produce three scientific review papers, identifying current achievements and future challenges. Finally, during the 3 days of the workshop, all the evidence was reviewed and the main conclusions and recommendations that were adopted by all participants are reported in the present Consensus Paper. CONCLUSIONS: Implementation of implant dentistry in the undergraduate curriculum has improved significantly, but still lags behind the benchmarks set in 2008 and the diversity between institutions remains big. At the post-graduation level, there is currently a wide diversity of courses and pathways towards competences related to implant dentistry and there is at present a great need for quality assurance, as well as standardisation and transparency of the learning outcomes.

Implant dentistry in postgraduate university education. Present conditions, potential, limitations and future trends.

INTRODUCTION: In recent years, opportunities for postgraduate university education in implant dentistry have increased significantly, with an increase in both the number but also the complexity of available postgraduate programmes. However, there appears to be a lack of standards directing the learning outcomes of such programmes. METHODS: A scientific literature search was conducted for publications reporting on university programmes within implant dentistry, including description of programmes and evaluation of learning outcomes. A separate Internet search was conducted to collect information on existing university programmes as presented on university websites. RESULTS: Implant dentistry has reached a critical mass of an independent, multidisciplinary and vibrant domain of science, which combines knowledge and discovery from many clinical and basic sciences. Many university programmes conclude with a master's or equivalent degree, but there appears to be a great diversity with regard to duration and learning objectives, as well as targeted skills and competences. The importance of implant dentistry has also increased within established specialist training programmes. There was little indication, however, that the comprehensive aspects of implant dentistry are present in all specialist training programmes where implants are being covered. CONCLUSIONS: Although universities should maintain the options of designing academic programmes as they best see fit, it is imperative for them to introduce some form of transparent and comparable criteria, which will allow the profession and the public to relate the degree and academic credentials to the actual skills and competences of the degree holder. With regard to established specialist training programmes, the interdisciplinary and comprehensive nature of implant dentistry needs to be emphasised, covering both surgical and restorative aspects. Finally, implant dentistry is not, at present, a dental specialty. The profession has not reached a consensus as to whether the introduction of a new recognised specialist field is either necessary or desired.

Implant dentistry education in Europe: 5 years after the Association for Dental Education in Europe consensus report.

INTRODUCTION: To promote consensus on implant dentistry university education in Europe, a workshop amongst university teachers and opinion leaders was organised in 2008. As a result, guidelines on both under- and postgraduate education were issued. This study aims to investigate the current status of university teaching of implant dentistry and the impact of the recommendations for teaching and assessment, 5 years after the first consensus. Finally, this report attempts to identify future directions in education within the discipline. MATERIALS AND METHODS: An online survey was distributed amongst 105 academic leaders in implant education in Europe, and 52 questionnaires were returned (response rate 50%). RESULTS: The average amount of implant dentistry in undergraduate curricula has increased to 74 h, compared to 36 h in 2008, and the inclusion of pre-clinical and clinical education has increased. No change occurred with regard to the aimed competence levels. It was suggested that certain implant procedures including surgery should be provided by dentists after attending additional courses, whilst complex treatments will still require specialist training. The 2008 workshop guidelines have been implemented to a varying extent (25-100%) in under- and postgraduate education. Main reported implementation barriers included limited time availability in the curriculum and limited financial/material resources. Future discussions about implant dentistry in Europe should be focused towards integration in current dental curricula, approaches to overcome barriers and the relations with and role of industrial partners. CONCLUSION: Implant dentistry is increasingly integrating in undergraduate dental education. Development of the consensus guidelines in 2008 may have facilitated this process. Nevertheless, further progress is needed on all educational levels to align training of professionals to the growing treatment needs of the population.

Current trends and status of continuing professional development in implant dentistry in Europe.

INTRODUCTION: Previous surveys have shown that newly graduated dentists, in most European countries, do not obtain adequate theoretical knowledge and, especially, clinical skills in implant dentistry (ID) through their undergraduate education and must therefore acquire knowledge and develop competencies through further postgraduate study. Moreover, clinicians, in general, need to continue to maintain the currency of their competence by undertaking ongoing continuing professional development (CPD). This seems particularly important in ID as techniques, and materials develop rapidly due to advances in biomedical technology. Despite recent developments, CPD in ID remains poorly organised with little standardisation or harmonisation across Europe. The objective of this survey was to explore the current status and trends within CPD education in ID in Europe. MATERIALS AND METHODS: Stakeholders and opinion leaders associated with ID education were invited by email to fill an online questionnaire (closing date: 30th April 2013). Two hundred and forty-seven questionnaires were distributed, and two separate reminders were sent to participants in 38 European countries. The survey contained 14 multiple-choice questions, and the data were collected using SurveyMonkey© software, exported in SPSS (Inc, Chicago, IL, USA) format and analysed using descriptive statistics. RESULTS: Two hundred respondents working in 24 countries replied to the survey (response rate of 81% of invitees and 63% of countries surveyed). The results demonstrated a wide divergence in the content and structure of CPD in ID in Europe. CONCLUSIONS: Dentists need CPD to develop their skills and to maintain their competence in ID. There is an urgent need for structured and accredited CPD, which should be readily available to all dentists practising ID. It should have pre-determined learning objectives, delivered by accredited CPD providers and educators, and have assessable outcome measures to ensure the best possible impact on clinical practice and patient safety.

Evaluation of a web-based application versus conventional instruction in the undergraduate curriculum of fixed prosthodontics.

AIMS: The present study aims to investigate the implications of web-based delivery of identical learning content for time efficiency and students' performance, as compared to conventional textbook resources. MATERIALS AND METHODS: Two cohorts of third year undergraduate dental students in 2003 (n = 35) and 2006 (n = 32) completed the study. Following a baseline pre-test, the students were divided into two groups and given 3 weeks for studying identical content using a web-based application (group A) or a conventional paper manuscript (group B). Post-test, end of semester examination and a final retention test were taken. Test scores and studying time was registered for both cohorts in 2003 and 2006. RESULTS: Group A and B knowledge gain was highly significant between the average per cent scores from pre-test, post-test and end of semester examination in both cohorts in 2003 and 2006 (P < 0.005). Group A spent 1.6× (2003) to 2.6× (2006) less time studying than group B. The average total studying time recorded for group B was 5.1 h using 6.2 learning sessions in 2003 and 3.5 h using 4.4 sessions in 2006. With group A, significantly less time was measured for studying through web-based content using an average of 2.5 h over 4.4 learning sessions in 2003 and 1.5 h added over three sessions in 2006. CONCLUSIONS: Web-based delivery of identical content results in less overall studying time as compared to textbook delivery. These results appear independent of the students' own preference of the learning medium.

Exotic encounters with dental implants: managing complications with unidentified systems.

As the application of dental implants increases worldwide, so is the number of technical and biological complications that general dental practitioners will be called to manage, while maintaining implant patients. In addition, the greater patient mobility encountered today combined with a growing trend of 'dental implant tourism' will very often result in situations where the dentist is requested to deal with complications in implants placed elsewhere and which sometimes might be of an 'exotic' system one cannot directly recognize. Such a situation can pose significant challenges to even experienced clinicians. The challenges are not only in the scientific field, but often include professional and ethical implications. This case report will discuss strategies for the management of implant complications in cases of unidentified implant systems. Critical factors in such situations would be the clinician's experience and special training, the correct radiographic technique, as well as access to the appropriate tools and devices.

Specialists' management decisions and attitudes towards mucositis and peri-implantitis.

BACKGROUND: Pathology of the peri-implant tissues, namely peri-implant mucositis and peri-implantitis are conditions that are often encountered and can threaten the long term survival of the implants. AIM: This study aimed to compare the attitudes of registered specialists in periodontology in Australia and the UK towards aetiology, prevalence, diagnosis and management of mucositis and peri-implantitis. METHODS: A validated questionnaire was used and the sample consisted of UK and Australian specialists. RESULTS: There were differences in the demographics of specialists in the two countries, with the Australian specialists being significantly younger. Most specialists in both countries identified the prevalence of peri-implant pathology between 0-25%. Although there was agreement as to the role of plaque in the aetiopathogenesis of the diseases, UK specialists were more likely to include adverse loading and smoking as etiological factors. There were significant differences in the management of the disease between the groups, including the use of mouth rinses, local and systemic antibiotics. Australians were more likely to use systemic antibiotics than in the UK. CONCLUSIONS: The results suggested that differences in professional demographics, educational resources and market factors, and the absence of consensus treatment standards can significantly affect the treatment modalities patients finally receive.