Towards optimized tissue regeneration: a new 3D printable bioink of alginate/cellulose hydrogel loaded with thrombocyte concentrate.

Introduction: Autologous platelet concentrate (APC) are pro-angiogenic and can promote wound healing and tissue repair, also in combination with other biomaterials. However, challenging defect situations remain demanding. 3D bioprinting of an APC based bioink encapsulated in a hydrogel could overcome this limitation with enhanced physio-mechanical interface, growth factor retention/secretion and defect-personalized shape to ultimately enhance regeneration. Methods: This study used extrusion-based bioprinting to create a novel bioink of alginate/cellulose hydrogel loaded with thrombocyte concentrate. Chemico-physical testing exhibited an amorphous structure characterized by high shape fidelity. Cytotoxicity assay and incubation of human osteogenic sarcoma cells (SaOs2) exposed excellent biocompatibility. enzyme-linked immunosorbent assay analysis confirmed pro-angiogenic growth factor release of the printed constructs, and co-incubation with HUVECS displayed proper cell viability and proliferation. Chorioallantoic membrane (CAM) assay explored the pro-angiogenic potential of the prints in vivo. Detailed proteome and secretome analysis revealed a substantial amount and homologous presence of pro-angiogenic proteins in the 3D construct. Results: This study demonstrated a 3D bioprinting approach to fabricate a novel bioink of alginate/cellulose hydrogel loaded with thrombocyte concentrate with high shape fidelity, biocompatibility, and substantial pro-angiogenic properties. Conclusion: This approach may be suitable for challenging physiological and anatomical defect situations when translated into clinical use.

Fused Filament Fabrication of NiTi Components and Hybridization with Laser Powder Bed Fusion for Filigree Structures.

The present study introduces an approach to the powder metallurgical shaping of a pseudo-elastic nickel-titanium (NiTi 44 alloy) combining two different Additive Manufacturing (AM) processes, namely fused filament fabrication (FFF) and Laser Powder Bed Fusion (LPBF), by manufacturing filigree structures on top of sintered FFF parts. Both processes start with commercial gas atomized NiTi powder, which is fractionated into two classes. Using the fine fraction with particle sizes <15 µm, robust thermoplastic filaments based on a non-commercial binder system were produced and processed to different auxetic and non-auxetic geometries employing a commercial standard printer. FTIR analysis for thermal decomposition products was used to develop a debinding regime. After sintering, the phase transformation austenite/martensite was characterized by DSC in as sintered and annealed state. Precipitates resulting from residual impurities were detected by micrographs and XRD. They led to an increased transformation temperature. Adjusting the oxygen and carbon content in the alloy remains a challenging issue for powder metallurgical processed NiTi alloys. Filigree lattice structures were built onto the surfaces of the sintered FFF parts by LPBF using the coarser powder fraction (15-45 µm). A good material bond was formed, resulting in the first known NiTi hybrid, which introduces new production and design options for future applications.

Scalable Fabrication of Nanostructured Tin Oxide Anodes for High-Energy Lithium-Ion Batteries.

Although tin and tin oxides have been considered very promising anode materials for future high-energy lithium-ion batteries due to high theoretical capacity and low cost, the development of commercial anodes falls short of expectations. This is due to several challenging issues related to a massive volume expansion during operation. Nanostructured electrodes can accommodate the volume expansion but typically suffer from cumbersome synthesis routes and associated problems regarding scalability and cost efficiency, preventing their commercialization. Herein, a facile, easily scalable, and highly cost-efficient fabrication route is proposed based on electroplating and subsequent electrolytic oxidation of tin, resulting in additive-free tin oxide anodes for lithium-ion batteries. The electrodes prepared accordingly exhibit excellent performance in terms of gravimetric and volumetric capacity as well as promising cycle life and rate capability, making them suitable for future high-energy lithium-ion batteries.

On the Stability of c-BN-Reinforcing Particles in Ceramic Matrix Materials.

Cubic boron nitride (c-BN) composites produced at high pressures and temperatures are widely used as cutting tool materials. The advent of new, effective pressure-assisted densification methods, such as spark plasma sintering (SPS), has stimulated attempts to produce these composites at low pressures. Under low-pressure conditions, however, transformation of c-BN to the soft hexagonal BN (h-BN) phase can occur, with a strong deterioration in hardness and wear. In the present work, the influence of secondary phases (B2O3, Si3N4, and oxide glasses) on the transformation of c-BN was studied in the temperature range between 1100 °C and 1575 °C. The different heat treated c-BN particles and c-BN composites were analyzed by SEM, X-ray diffraction, and Raman spectroscopy. The transformation mechanism was found to be kinetically controlled solution-diffusion-precipitation. Given a sufficiently low liquid phase viscosity, the transformation could be observed at temperatures as low as 1200 °C for the c-BN-glass composites. In contrast, no transformation was found at temperatures up to 1575 °C when no liquid oxide phase is present in the composite. The results were compared with previous studies concerning the c-BN stability and the c-BN phase diagram.