Inverse design of a pyrochlore lattice of DNA origami through model-driven experiments.

Sophisticated statistical mechanics approaches and human intuition have demonstrated the possibility of self-assembling complex lattices or finite-size constructs. However, attempts so far have mostly only been successful in silico and often fail in experiment because of unpredicted traps associated with kinetic slowing down (gelation, glass transition) and competing ordered structures. Theoretical predictions also face the difficulty of encoding the desired interparticle interaction potential with the experimentally available nano- and micrometer-sized particles. To overcome these issues, we combine SAT assembly (a patchy-particle interaction design algorithm based on constrained optimization) with coarse-grained simulations of DNA nanotechnology to experimentally realize trap-free self-assembly pathways. We use this approach to assemble a pyrochlore three-dimensional lattice, coveted for its promise in the construction of optical metamaterials, and characterize it with small-angle x-ray scattering and scanning electron microscopy visualization.

The oxDNA Coarse-Grained Model as a Tool to Simulate DNA Origami.

This chapter introduces how to run molecular dynamics simulations for DNA origami using the oxDNA coarse-grained model.

A simple solution to the problem of self-assembling cubic diamond crystals.

The self-assembly of colloidal diamond (CD) crystals is considered as one of the most coveted goals of nanotechnology, both from the technological and fundamental points of view. For applications, colloidal diamond is a photonic crystal which can open new possibilities of manipulating light for information processing. From a fundamental point of view, its unique symmetry exacerbates a series of problems that are commonly faced during the self-assembly of target structures, such as the presence of kinetic traps and the formation of crystalline defects and alternative structures (polymorphs). Here we demonstrate that all these problems can be systematically addressed via SAT-assembly, a design framework that converts self-assembly into a Boolean satisfiability problem (SAT). Contrary to previous solutions (requiring four or more components), we prove that the assembly of the CD crystal only requires a binary mixture. Moreover, we use molecular dynamics simulations of a system composed by nearly a million nucleotides to test a DNA nanotechnology design that constitutes a promising candidate for experimental realization.

The influence of Holliday junction sequence and dynamics on DNA crystal self-assembly.

The programmable synthesis of rationally engineered crystal architectures for the precise arrangement of molecular species is a foundational goal in nanotechnology, and DNA has become one of the most prominent molecules for the construction of these materials. In particular, branched DNA junctions have been used as the central building block for the assembly of 3D lattices. Here, crystallography is used to probe the effect of all 36 immobile Holliday junction sequences on self-assembling DNA crystals. Contrary to the established paradigm in the field, most junctions yield crystals, with some enhancing the resolution or resulting in unique crystal symmetries. Unexpectedly, even the sequence adjacent to the junction has a significant effect on the crystal assemblies. Six of the immobile junction sequences are completely resistant to crystallization and thus deemed "fatal," and molecular dynamics simulations reveal that these junctions invariably lack two discrete ion binding sites that are pivotal for crystal formation. The structures and dynamics detailed here could be used to inform future designs of both crystals and DNA nanostructures more broadly, and have potential implications for the molecular engineering of applied nanoelectronics, nanophotonics, and catalysis within the crystalline context.

Design and simulation of DNA, RNA and hybrid protein-nucleic acid nanostructures with oxView.

Molecular simulation has become an integral part of the DNA/RNA nanotechnology research pipeline. In particular, understanding the dynamics of structures and single-molecule events has improved the precision of nanoscaffolds and diagnostic tools. Here we present oxView, a design tool for visualization, design, editing and analysis of simulations of DNA, RNA and nucleic acid-protein nanostructures. oxView provides an accessible software platform for designing novel structures, tweaking existing designs, preparing them for simulation in the oxDNA/RNA molecular simulation engine and creating visualizations of simulation results. In several examples, we present procedures for using the tool, including its advanced features that couple the design capabilities with a coarse-grained simulation engine and scripting interface that can programmatically edit structures and facilitate design of complex structures from multiple substructures. These procedures provide a practical basis from which researchers, including experimentalists with limited computational experience, can integrate simulation and 3D visualization into their existing research programs.

A Self-Regulating DNA Rotaxane Linear Actuator Driven by Chemical Energy.

Nature-inspired molecular machines can exert mechanical forces by controlling and varying the distance between two molecular subunits in response to different inputs. Here, we present an automated molecular linear actuator composed of T7 RNA polymerase (T7RNAP) and a DNA [2]rotaxane. A T7 promoter region and terminator sequences are introduced into the rotaxane axle to achieve automated and iterative binding and detachment of T7RNAP in a self-controlled fashion. Transcription by T7RNAP is exploited to control the release of the macrocycle from a single-stranded (ss) region in the T7 promoter to switch back and forth from a static state (hybridized macrocycle) to a dynamic state (movable macrocycle). During transcription, the T7RNAP keeps restricting the movement range on the axle available for the interlocked macrocycle and prevents its return to the promotor region. Since this range is continuously depleted as T7RNAP moves along, a directional and active movement of the macrocycle occurs. When it reaches the transcription terminator, the polymerase detaches, and the system can reset as the macrocycle moves back to hybridize again to the ss-promoter docking site. The hybridization is required for the initiation of a new transcription cycle. The rotaxane actuator runs autonomously and repeats these self-controlled cycles of transcription and movement as long as NTP-fuel is available.

Interaction kinetics and accessibility of sulfadiazine in model clay-humic acid suspension: Electron spin resonance investigations with nitroxide spin label.

The characterization of the interaction of sulfonamides with soil is of particular interest in environmental risk and persistence assessment. In the present work electron spin resonance spectroscopy (ESR) was used to investigate the interaction kinetics of spin labelled sulfadiazine (SL-SDZ) with model clay-humic acid suspensions. The ESR spectra showed that SL-SDZ incubated with Leonardite humic acid (LHA) and Ca-hectorite as model clay was immobilized due to covalent binding of its aniline moiety to LHA. From the immobilization kinetics measured over a period of 1200 h a pseudo-first order reaction with a time constant of 82.6 ± 25.0 h of covalent binding was determined. Additionally, SL-SDZ was strongly sorbed by LHA immediately after incubation but not durably sequestered. Compared to incubation without Ca-hectorite the covalent binding kinetics of SL-SDZ as well as its strong sorption were retarded.

Fate of pendimethalin in soil and characterization of non-extractable residues (NER).

One important route of degradation of herbicide pendimethalin in soil leads to formation of non-extractable residues (NER). To investigate NER nature (irreversibly, chemically bound, including possible biogenic NER, or strongly sorbed and entrapped) residues of 14C-labelled pendimethalin in soil were investigated after conventional extraction with organic solvents by silylation. After 400 days of incubation, 32.0% of applied radioactivity (AR) was transformed into NER, 39.9% AR remained extractable. Mineralization reached 26.2% AR. Additionally, 14C-pendimethalin was incubated in soil amended with compost for 217 days to investigate the influence of organic amendments on NER formation. NER amounted to 37.8% AR, with 57.9% AR remaining extractable. Mineralization was negligible (1.4% AR). For all sampling times only low amounts of radioactivity were entrapped (<5% AR) in soil without compost amendment. Pendimethalin was present only in trace amounts (ca. 0.4% AR), other released residues consisted of undefined fractions (sum ≈2% AR). In soil amended with compost, silylation overall resulted in release of higher amounts of radioactivity (19% AR). Addition of compost led to an increase in potential entrapment and sorption sites for pendimethalin, forming higher amounts of strongly sorbed, entrapped residues. Furthermore, potential release of non-extractable pendimethalin residues was investigated by incubation of solvent-extracted soil (without compost amendment) mixed with fresh soil for additional 3 months. NER were partly mineralized (7% AR) and 20% became extractable with organic solvents. However, no pendimethalin or any known metabolites were found. It can be concluded that no parent pendimethalin was found and NER of pendimethalin in soil are mainly formed by covalent binding to organic matrix with only low potential of remobilization under natural conditions.

Design, optimization and analysis of large DNA and RNA nanostructures through interactive visualization, editing and molecular simulation.

This work seeks to remedy two deficiencies in the current nucleic acid nanotechnology software environment: the lack of both a fast and user-friendly visualization tool and a standard for structural analyses of simulated systems. We introduce here oxView, a web browser-based visualizer that can load structures with over 1 million nucleotides, create videos from simulation trajectories, and allow users to perform basic edits to DNA and RNA designs. We additionally introduce open-source software tools for extracting common structural parameters to characterize large DNA/RNA nanostructures simulated using the coarse-grained modeling tool, oxDNA, which has grown in popularity in recent years and is frequently used to prototype new nucleic acid nanostructural designs, model biophysics of DNA/RNA processes, and rationalize experimental results. The newly introduced software tools facilitate the computational characterization of DNA/RNA designs by providing multiple analysis scripts, including mean structures and structure flexibility characterization, hydrogen bond fraying, and interduplex angles. The output of these tools can be loaded into oxView, allowing users to interact with the simulated structure in a 3D graphical environment and modify the structures to achieve the required properties. We demonstrate these newly developed tools by applying them to design and analysis of a range of DNA/RNA nanostructures.

TacoxDNA: A user-friendly web server for simulations of complex DNA structures, from single strands to origami.

Simulations of nucleic acids at different levels of structural details are increasingly used to complement and interpret experiments in different fields, from biophysics to medicine and materials science. However, the various structural models currently available for DNA and RNA and their accompanying suites of computational tools can be very rarely used in a synergistic fashion. The tacoxDNA webserver and standalone software package presented here are a step toward a long-sought interoperability of nucleic acids models. The webserver offers a simple interface for converting various common input formats of DNA structures and setting up molecular dynamics (MD) simulations. Users can, for instance, design DNA rings with different topologies, such as knots, with and without supercoiling, by simply providing an XYZ coordinate file of the DNA centre-line. More complex DNA geometries, as designable in the cadnano, CanDo and Tiamat tools, can also be converted to all-atom or oxDNA representations, which can then be used to run MD simulations. Though the latter are currently geared toward the native and LAMMPS oxDNA representations, the open-source package is designed to be further expandable. TacoxDNA is available at http://tacoxdna.sissa.it. © 2019 Wiley Periodicals, Inc.

Coastal accumulation of microplastic particles emitted from the Po River, Northern Italy: Comparing remote sensing and hydrodynamic modelling with in situ sample collections.

Microplastic research has mainly concentrated on open seas, while riverine plumes remain largely unexplored despite their hypothesized importance as a microplastic source to coastal waters. This work aimed to model coastal accumulation of microplastic particles (1-5 mm) emitted by the Po River over 1.5 years. We posit that river-induced microplastic accumulation on adjacent coasts can be predicted using (1) hydrodynamic-based and (2) remote sensing-based modelling. Model accumulation maps were validated against sampling at nine beaches, with sediment microplastic concentrations up to 78 particles/kg (dry weight). Hydrodynamic modelling revealed that discharged particle amount is only semi-coupled to beaching rates, which are strongly mouth dependent and occur within the first ten days. Remote sensing modelling was found to better capture river mouth relative strength, and accumulation patterns were found consistent with hydrodynamic modelling. This methodology lays groundwork for developing an operational monitoring system to assess microplastic pollution emitted by a major river.

Triangulated Wireframe Structures Assembled Using Single-Stranded DNA Tiles.

The field of structural DNA nanotechnology offers a wide range of design strategies with which to build structures with a desired aspect ratio, size, and shape. Compared with traditional close-packed DNA structures, triangulated wireframe structures require less material per surface or volume unit and improve the stability in biologically relevant conditions due to the reduced electrostatic repulsion. Herein, we expand the design space of the DNA single-stranded tile method to cover a range of anisotropic, finite, triangulated wireframe structures as well as a number of one-dimensional crystalline assemblies. These structures are composed of six-arm junctions with a single double helix as connecting edges that assemble in physiologically relevant salinities. For a reliable folding of the structures, single-stranded spacers 2-4 nucleotides long have to be introduced in the junction connecting neighboring arms. Coarse-grained molecular dynamics simulations using the oxDNA model suggests that the spacers prevent the stacking of DNA helices, thereby facilitating the assembly of planar geometries.

DNA-encircled lipid bilayers.

Lipid bilayers and lipid-associated proteins play crucial roles in biology. As in vivo studies and manipulation are inherently difficult, membrane-mimetic systems are useful for the investigation of lipidic phases, lipid-protein interactions, membrane protein function and membrane structure in vitro. In this work, we describe a route to leverage the programmability of DNA nanotechnology and create DNA-encircled bilayers (DEBs). DEBs are made of multiple copies of an alkylated oligonucleotide hybridized to a single-stranded minicircle, in which up to two alkyl chains per helical turn point to the inside of the toroidal DNA ring. When phospholipids are added, a bilayer is observed to self-assemble within the ring such that the alkyl chains of the oligonucleotides stabilize the hydrophobic rim of the bilayer to prevent formation of vesicles and support thermotropic lipid phase transitions. The DEBs are completely free of protein and can be synthesized from commercially available components using routine equipment. The diameter of DEBs can be varied in a predictable manner. The well-established toolbox from structural DNA nanotechnology, will ultimately enable the rational design of DEBs so that their size, shape or functionalization can be adapted to the specific needs of biophysical investigations of lipidic phases and the properties of membrane proteins embedded into DEB nanoparticle bilayers.

Structural Transformation of Wireframe DNA Origami via DNA Polymerase Assisted Gap-Filling.

The programmability of DNA enables constructing nanostructures with almost any arbitrary shape, which can be decorated with many functional materials. Moreover, dynamic structures can be realized such as molecular motors and walkers. In this work, we have explored the possibility to synthesize the complementary sequences to single-stranded gap regions in the DNA origami scaffold cost effectively by a DNA polymerase rather than by a DNA synthesizer. For this purpose, four different wireframe DNA origami structures were designed to have single-stranded gap regions. This reduced the number of staple strands needed to determine the shape and size of the final structure after gap filling. For this, several DNA polymerases and single-stranded binding (SSB) proteins were tested, with T4 DNA polymerase being the best fit. The structures could be folded in as little as 6 min, and the subsequent optimized gap-filling reaction was completed in less than 3 min. The introduction of flexible gap regions results in fully collapsed or partially bent structures due to entropic spring effects. Finally, we demonstrated structural transformations of such deformed wireframe DNA origami structures with DNA polymerases including the expansion of collapsed structures and the straightening of curved tubes. We anticipate that this approach will become a powerful tool to build DNA wireframe structures more material-efficiently, and to quickly prototype and test new wireframe designs that can be expanded, rigidified, or mechanically switched. Mechanical force generation and structural transitions will enable applications in structural DNA nanotechnology, plasmonics, or single-molecule biophysics.

Considerations of temperature in the context of the persistence classification in the EU.

Simulation degradation studies for industrial chemicals, biocidal products and plant protection products are required in the EU to estimate half-lives in soil, water and sediment for the comparison to persistence criteria for hazard (P/vP) assessment, and for use in exposure assessments. There is a discrepancy between European regulatory approaches regarding the temperature at which degradation half-lives should be (1) measured in simulation degradation testing of environmental compartments, and (2) compared to the P/vP criteria. In this paper, an opinion is provided on the options for the experimental temperature and extrapolation to other conditions. A review of the historical development of persistence criteria did not give conclusive evidence of the temperature at which the half-lives that underpin the P-criteria were measured, but room temperature is likely. Half-lives measured at 20 °C are in line with the intentions of some international agreements, but in the EU there is a continued political debate regarding the relevant temperature for comparison with persistence criteria. Measuring degradation at 20 °C has the advantage that metabolites/transformation products can be identified with greater accuracy, and that kinetic fits to determine half-lives for parent compounds and metabolites carry less uncertainty. Extrapolation of half-lives to lower temperatures is possible for assessing environmental exposure, but the uncertainty of the persistence classification is smaller when measured half-lives are used for direct comparison with P/vP criteria, without extrapolation. Model simulations demonstrate the pattern of concentrations that can be expected for realistic worst case climate scenarios in the EU based on the half-life of 120 days in soil at 20 °C and of 40 days in water at 20 °C, and their temporal and spatial variability.

Block Copolymer Micellization as a Protection Strategy for DNA Origami.

DNA nanotechnology enables the synthesis of nanometer-sized objects that can be site-specifically functionalized with a large variety of materials. For these reasons, DNA-based devices such as DNA origami are being considered for applications in molecular biology and nanomedicine. However, many DNA structures need a higher ionic strength than that of common cell culture buffers or bodily fluids to maintain their integrity and can be degraded quickly by nucleases. To overcome these deficiencies, we coated several different DNA origami structures with a cationic poly(ethylene glycol)-polylysine block copolymer, which electrostatically covered the DNA nanostructures to form DNA origami polyplex micelles (DOPMs). This straightforward, cost-effective, and robust route to protect DNA-based structures could therefore enable applications in biology and nanomedicine where unprotected DNA origami would be degraded.

Critical assessment of pendimethalin in terms of persistence, bioaccumulation, toxicity, and potential for long-range transport.

Pendimethalin (PND, CAS registry number 40487-42-1) is a dinitroaniline herbicide that selectively controls broad-leaf and grassy weeds in a variety of crops and in noncrop areas. It has been on the market for about 30 yr and is currently under review for properties related to persistence (P), bioaccumulation (B), and toxicity (T) in the European Union (EU). A critical review of these properties as well as potential for long-range transport (LRT) was conducted. Pendimethalin has a geometric mean (GM) half-life of 76-98 d in agriculturally relevant soils under aerobic conditions in the lab. The anaerobic half-life was 12 d. The GM for field half-lives was 72 d. The GM half-life for sediment-water tests in the lab was 20 d and that in field aquatic cosms ranged from 45 to 90 d. From these data PND is not persistent as defined in the Annex II of EC regulation 1107/2009. The GM bioconcentration factor for PND was 1878, less than the criterion value. This was consistent with lack of biomagnification or accumulation in aquatic and terrestrial food chains. The GM no-observed-effect concentration (NOEC) value for fish was 43 µg/L, and 11 µg/L for algae. These do not trigger the criterion value for toxicity. In air, the DT50 of PND was estimated to be 0.35 d, which is well below the criterion of 2 d for LRT under the United Nations Economic Commission for Europe (UNECE) Aarhus protocol. Modeling confirmed lack of LRT. Because of its volatility, PND may be transported over short distances in air and was found in samples in local and semiremote regions; however, these concentrations are not of toxicological concern. Unlike other current-use pesticides, PND has not been found in samples from remote regions since 2000 and there is no apparent evidence that this herbicide accumulates in food chains in the Arctic.

The origin and evolution of assessment criteria for persistent, bioaccumulative and toxic (PBT) chemicals and persistent organic pollutants (POPs).

General public concern over the effects of persistent chemicals began in the early 1960s. Since then, significant scientific advances have increased our understanding of persistent, bioaccumulative, and toxic (PBT) chemicals and the properties and processes that influence their fates in, and adverse effects on, human health and the environment. In addition to the scientific advances, a number of legislations and agreements for national, international, and global identification and control of PBT chemicals have been adopted. However, some of the rationales and thoughts that were relied upon when the first criteria were developed to identify and categorize PBT chemicals and then POPs (persistent organic pollutants) have not been carried forward. Criteria have been based upon available data of neutral hydrophobic substances as reference chemicals, derived under laboratory conditions. They evolved over the last decades due to the diversification of the protection aims under various national regulatory frameworks and international agreements, advances in methods for estimation of physical/chemical properties, and the identification of chemicals which are non-traditional POPs. Criteria are not defined purely by science; they also are subject to the aims of policy. This paper offers a historical perspective on the development of criteria for PBT chemicals and POPs. It also offers suggestions for rationalization of protection goals, describes some emerging procedures for identification of compounds of concern, and proposes information that needs to be considered when applying criteria to screening and/or evaluation of new chemicals.

Design and Synthesis of Triangulated DNA Origami Trusses.

DNA nanotechnology offers unique control over matter on the nanoscale. Here, we extend the DNA origami method to cover a range of wireframe truss structures composed of equilateral triangles, which use less material per volume than standard multiple-helix bundles. From a flat truss design, we folded tetrahedral, octahedral, or irregular dodecahedral trusses by exchanging few connector strands. Other than standard origami designs, the trusses can be folded in low-salt buffers that make them compatible with cell culture buffers. The structures also have defined cavities that may in the future be used to precisely position functional elements such as metallic nanoparticles or enzymes. Our graph routing program and a simple design pipeline will enable other laboratories to make use of this valuable and potent new construction principle for DNA-based nanoengineering.

Switchable Reconfiguration of a Seven-Ring Interlocked DNA Catenane Nanostructure.

The synthesis, purification, and structure characterization of a seven-ring interlocked DNA catenane is described. The design of the seven-ring catenane allows the dynamic reconfiguration of any of the four rings (R1, R3, R4, and R6) on the catenane scaffold, or the simultaneous switching of any combination of two, three, or all four rings to yield 16 different isomeric states of the catenane. The dynamic reconfiguration across the states is achieved by implementing the strand-displacement process in the presence of appropriate fuel/antifuel strands and is probed by fluorescence spectroscopy. Each of the 16 isomers of the catenane can be transformed into any of the other isomers, thus allowing for 240 dynamic transitions within the system.