Impact of Patient Education Formats on Treatment Adherence and Denture Hygiene in Edentulous Patients: A Comparative Study.

BACKGROUND Effective communication and patient education are important in geriatric dental care. Memory decline complicates patient adherence. This study aimed to compare verbal, audio, and video patient education material (PEM) and adherence to dental prosthetic management in edentulous patients. MATERIAL AND METHODS 90 completely/partially edentulous patients (aged 40 to 70 years), were divided (simple random) into three groups (Gp) of 30 each . A total of 68 instructions were organized into 9 learning categories. For GpVi, a 20 minute video was shot using a Sony camera (PD170), with two actors depicting related PEM information. Patients were recalled after 1 day and 7days, to recall the PEM instructions. A Denture plaque Index (DPI) determined the efficiency of the instructions at both time intervals. Frequencies, means and standard deviations were derived for each group and then compared using Chi square, paired and unpaired t test and a Neuman-Keul post hoc pairwise test. All significant differences were kept at probability t value of ≤0.05. RESULTS PEM instructions related to patient individuality, proper tongue position and miscellaneous showed poor patient recall. At 1 day interval, audio was found to have better recall than video and verbal in 5 PEM instruction categories. At 7 day interval, video showed better recall than other two groups (P≤0.05). Despite improvements in patients recall, DPI revealed better denture hygiene maintenance in patients receiving instructions through video format (P≤0.05). CONCLUSIONS For all categories, no single media was considered to be sufficient, audio produced early better recall while video influenced long term recall and better denture hygiene maintenance.

Prevalence and Variation of Medical Comorbidities in Oral Surgery Patients: A Retrospective Study at Jazan University.

BACKGROUND An aged population is susceptible to chronic diseases, which impacts oral surgery treatment procedures. This retrospective study aimed to evaluate the incidence of medical comorbidities in 640 oral surgery patients treated at the College of Dentistry, Jazan University. MATERIAL AND METHODS This single-center observational study investigated medical records of outpatients who visited Jazan University Dental College Hospital in a 1-year period (2018-2019). Patients’ clinical and radiographic archives were screened to obtain relevant data. Categorical and continuous variables were expressed in terms of frequency and mean values, respectively. Differences in variables were statistically analyzed using the chi-square goodness of fit and proportional test, with a probability value P≤0.05 considered significant. RESULTS Analysis of 640 patient records included records of 300 men and 340 women who underwent oral surgery, of whom 176 patients (27.5%), including 97 men and 79 women, had medical comorbidities. The most common comorbidities were endocrine disease (7.03%), cardiovascular disease (6.71%), respiratory disease (4.53%), and hematological disorders (3.43%). Individual diseases that showed higher prevalence were diabetes mellitus (4.68%), hypertension (3.43%), bronchial asthma (2.65%), and anemia (1.4%). Differences by sex were observed in many individual disorders. CONCLUSIONS Outpatients in oral surgery clinics presented a significant variance in the incidence of medical comorbidities, among which diabetes and hypertension were most common. A proper case history is the best preventive measure that helps a surgeon avert medical emergencies and post-surgical complications.

Evaluation of Retentive Strength of 50 Endodontically-Treated Single-Rooted Mandibular Second Premolars Restored with Cast Post Cores Using 5 Common Luting (Cement) Agents.

BACKGROUND A luting agent is a dental cement used to secure a dental restoration. This study aimed to evaluate retentive strength of 50 endodontically-treated single-rooted mandibular second premolars (extracted) restored using 5 common luting (cement) agents. MATERIAL AND METHODS Fifty single-rooted mandibular second premolars with adequate root length and uniform size/shape were decoronated. After completing endodontic biomechanical preparation and obturation, root canals of all specimens were prepared to receive a cast post core. Depending upon cementation type, CPC specimens were divided in 5 groups (10 each) (Gp): Zinc phosphate (Gp ZP), polycarboxylate (Gp PC), glass ionomer (Gp GI), resin-modified glass ionomer (Gp RGI), and resin cement (Gp RC). Retentive strength was determined using the adhesive failure pull-out test. Mean/standard deviations were calculated for tensile forces (in kilograms) and differences were determined using analysis of variance (ANOVA). Multiple comparison was performed using the t test. A P value of ≤0.05 indicated a statistically significant difference. RESULTS The order of mean tensile strength from higher to lower was Gp RC (21.46) >Gp RGI (18.17) >Gp GI (16.07) >Gp ZP (15.33) >Gp PC (13.63). Differences in retentive strengths between the cements were significant (P≤0.05). Multiple-group comparisons showed that except for Gp ZP and Gp GI, all groups differed significantly from each other. CONCLUSIONS All investigated cements provided optimal retentive strengths, with wide differences between them. Resin cements should be used when CPC removal is not anticipated, while polycarboxylate or zinc phosphate should be used if CPC removal is anticipated.

Evaluation of the Milled and Three-Dimensional Digital Manufacturing, 10-Degree and 20-Degree Preparation Taper, Groove and Box Auxiliary Retentive Features, and Conventional and Resin-Based Provisional Cement Type on the Adhesive Failure Stress of 3 mm Short Provisional Crowns.

BACKGROUND This study evaluated the effects of milling (CADCAM), 3D printing, preparation taper angles (10-degree and 20-degree), auxiliary retentive features (groove and box), and provisional cement types (conventional and resin-based) on the adhesive failure stress of 3-mm short provisional crowns (PC). The research was motivated by the need to understand how digital dentistry technologies impact the retention and durability of provisional crowns. MATERIAL AND METHODS A total of 160 working models (3D-printed) and PCs [80 milled (CopraTemp)/80 printed (Asiga)] were fabricated from two 10- and 20-degree typodont master models and two 20-degree 3D-printed master models (groove and box), simulating a 3 mm high all-ceramic short PC. After provisional cementation with conventional (Kerr TempBond) and resin-based (ProviTemp) cements, 16 subgroups (n=10 each) underwent thermocycling (10 000 cycles; 5-55°C) and pull-off tests on a universal testing machine. Statistical analysis was performed using one-way ANOVA and post hoc Tukey test. RESULTS Conventional cement failed at lower stress for milled (47.68 to 73.54) and printed (48.40 to 77.91) as compared to resin cement for milled (104.2 to 137.27) and printed (184.85 to 328.84), respectively, with significant differences. Increased taper and groove decreased failure load except for the printed PC/resin cement combination. Use of proximal box preparation increased retention significantly. Except for 20-degree taper cemented with conventional cement, the differences in auxiliary retentive features for milled and printed provisional crowns were statistically significant at P≤0.05. CONCLUSIONS 3D-printed PC, resin-based cement, 10-degree taper, and proximal box preparation were associated with higher retention than milled, conventional cements, 20-degree taper, and vertical groove.

Influence of Chairside Simulated Adjustment (Finishing and Polishing) Protocol and Chlorhexidine Mouthwash Immersion on Color Stability and Translucency of 2 and 3 Preshaded Multilayered Monolithic Zirconia.

BACKGROUND Preshaded monolithic zirconia (MLZ) is reported to have high translucency. This study aimed to assess the effect of chlorhexidine gluconate (ChG) mouthwash on color and translucency parameter (TP) of 2 different preshaded MLZ dental ceramics after clinical adjustment. MATERIAL AND METHODS Two MLZ disk-shaped specimens [NPM (Nacera Pearl Multi-Shade) (n=72) and CZM (Ceramill Zolid FX Multilayer)] (n=72) were simulated for clinical adjustment, finished, and polished using 2 adjustment kits [recommended kit, third-party kit: Diasynt Plus and SUN (n=12 each)] and later immersed in ChG mouthwash (Avohex) for 2 weeks. Difference in color (ΔE) and TP (Y) were calculated using the CIELab formula after measuring the coordinates (Lab) with a colorimeter. Individual changes in color and TP were assessed on the Clinical acceptance (perceptible) threshold (CAT/CPT) and Translucency perception threshold (TPT), respectively. Differences between the 2 ceramics were assessed using one-way ANOVA and post hoc tests, with all differences considered significant at P<0.05. RESULTS NPM and CZM differed in color at baseline despite having the same Vita shade combination. Between the 2 preshaded MLZ ceramics, NPM showed significant changes in color when adjusted with a third-party kit. Chlorhexidine produced changes in color and TP that were designated as clinically perceptible (ΔE=1.0 to 3.3) on the CAT/CPT and TPT scales, irrespective of the adjustment kit used. ChG produced the least or no changes in glazed MLZ specimens. CONCLUSIONS ChG mouthwash, whenever prescribed for preshaded MLZ restoration, should be adjusted prior to final glazing to avoid clinical adjustments that adversely affects color and translucency of the restoration.

Effect of Repeated Moist Heat Sterilization on Titanium Implant-Abutment Interface-An In Vitro Study.

OBJECTIVES: Sterilization eliminates microbial viability by decreasing the biological load, but likewise have the ability to deteriorate the mechanical properties of an implant material. This study intended to evaluate the effect of repeated moist heat sterilization on implant-abutment interface using two different implant systems. MATERIALS AND METHODS: Forty screw-retained titanium implant-abutment combinations (fixture 3.5 ×10 mm, abutment 2 mm diameter), twenty each from Genesis (Aktiv Implant Systems, United States) and Bredent (SKY, Germany), were divided into four different groups (n = 10) and placed in a computer-aided diagnostic model. The abutments from each group were exposed to first and second autoclave cycle (121°C for 30 minutes), connected back to the fixture and analyzed under scanning electron microscope for marginal gap and surface roughness. RESULTS: Genesis group showed higher marginal gaps on both sides (buccal/mesial [2.8 ± 0.47]; lingual/distal [2.8 ± 0.33]), while Bredent implant-abutment system (IAS) did not show any changes in marginal gaps after autoclaving. Differences within and between the group were found to be statistically significant. Surface roughness for Genesis (243.7 ± 70.30) and Bredent groups (528.9 ± 213.19) was highest at second autoclave, with Bredent implant-abutment showing higher values for surface roughness than Genesis IAS. CONCLUSION: Marginal vertical gap increased with autoclaving for Genesis IAS, while Bredent implant abutments were more stable. Surface roughness increases with autoclaving for both Genesis and Bredent group of IAS.

Ultraviolet disinfection (UV-D) robots: bridging the gaps in dentistry.

Maintaining a microbe-free environment in healthcare facilities has become increasingly crucial for minimizing virus transmission, especially in the wake of recent epidemics like COVID-19. To meet the urgent need for ongoing sterilization, autonomous ultraviolet disinfection (UV-D) robots have emerged as vital tools. These robots are gaining popularity due to their automated nature, cost advantages, and ability to instantly disinfect rooms and workspaces without relying on human labor. Integrating disinfection robots into medical facilities reduces infection risk, lowers conventional cleaning costs, and instills greater confidence in patient safety. However, UV-D robots should complement rather than replace routine manual cleaning. To optimize the functionality of UV-D robots in medical settings, additional hospital and device design modifications are necessary to address visibility challenges. Achieving seamless integration requires more technical advancements and clinical investigations across various institutions. This mini-review presents an overview of advanced applications that demand disinfection, highlighting their limitations and challenges. Despite their potential, little comprehensive research has been conducted on the sterilizing impact of disinfection robots in the dental industry. By serving as a starting point for future research, this review aims to bridge the gaps in knowledge and identify unresolved issues. Our objective is to provide an extensive guide to UV-D robots, encompassing design requirements, technological breakthroughs, and in-depth use in healthcare and dentistry facilities. Understanding the capabilities and limitations of UV-D robots will aid in harnessing their potential to revolutionize infection control practices in the medical and dental fields.

Evaluation of the Effects of Digital Manufacturing, Preparation Taper, Cement Type, and Aging on the Color Stability of Anterior Provisional Crowns Using Colorimetry.

BACKGROUND Replicating the 3-dimensional (3D) color of natural teeth in artificial substitutes is challenging. Fixed dental prosthodontics require aesthetic, color-stable provisional restorations. Recent milling and 3D printing digital manufacturing techniques offer improved outcomes. This study assesses color stability in various digital manufacturing methods, tapers, and aging effects on anterior provisional resin restorations. MATERIAL AND METHODS Two all-ceramic tooth preparations on typodont teeth with 10° and 20° tapers were converted into experimental dies. Forty temporary crowns were manufactured using 3D printing and computer-aided design/computer-aided manufacturing (milling). Within these 2 groups, 10 crowns were cemented using a regular and clear provisional cement. All samples were thermocycled to simulate clinical use of 6 months. Color difference formula (CIEDE2000) indicated changes between before and after cementation (ΔE00) and between after cementation and after thermocycling (ΔE00[II]). The color change was considered significant in terms of clinically perceptible (ΔE00 ≤0.62) and acceptable (ΔE00 ≤2.62) changes. One-way ANOVA (P value of less than 0.05) calculated overall differences, which were established using a Fisher post hoc test. RESULTS Crowns cemented with clear cement showed fewer color changes irrespective of the manufacturing technique or taper. Notably, only the 10° 3D-printed crown with clear cement had an imperceptible color change at the pre-/post-cementation phase. Meanwhile, the 10° and 20° milled crowns with regular cement exhibited unacceptable color changes after thermocycling. CONCLUSIONS For long­term temporization in the aesthetic zone, properly optimized 3D-printed provisional restorations cemented with clear cement had better color stability.

Prosthodontic Rehabilitation's Role in Alleviating Anxiety and Depression in Mucormycosis-Induced Maxillectomy Patients Post-COVID-19.

BACKGROUND The aim of this study was to assess the influence of maxillofacial prosthodontic rehabilitation on anxiety/depression severity in patients with rhino-orbital cerebral mucormycosis (ROCM) after maxillectomy. MATERIAL AND METHODS Sixty post-mucormycotic patients treated with maxillectomy (33 males, 27 females) were divided into 5 groups based on maxillectomy types (unilateral/bilateral, subtotal/total) and treatment given (psychotherapy/obturator/implant/orbital/ocular prosthesis). Anxiety and depression symptoms were assessed using appearance anxiety inventory (AAI) and patient health questionnaire (PHQ9). Data were collected at 4 time intervals [T0 (before prosthesis), T1 (2 weeks after prosthesis), T2 (6 months) and T3 (1 year). Frequency distribution and mean values were determined for individual group/subgroups/total cohort. Differences between groups were determined using one-way ANOVA (single-factor/Friedman's) followed by post hoc correction (Bonferroni) and t test for unequal variance with probability P value being statistically significant at <0.05. RESULTS The mean scores for appearance anxiety were 29.13±4.72 (diagnostic for existing body dysmorphic disorder) at T0, which decreased to 16.88±3.02 at T3 for the total cohort. The differences for the gender-based cohort, its various groups, and respective subgroups were significant (P<0.05) at various time intervals. The mean scores in the total cohort for depression symptom severity were 16.81±4.89 (moderately severe) at T0, which increased to 18.5±4.94 at T1, followed by reduction at T2 (12.0±4.43; moderate) and T3 (7.38±3.37; mild). Gender differences for both variables were found to be statistically significant (P<0.05). CONCLUSIONS Comprehensive rehabilitation that included a diagnosis of psychological symptoms followed by psychotherapeutic/pharmacotherapeutic/prosthodontic intervention reduced the anxiety/depression symptom levels to normal at 1 year.

Comparative Evaluation of Dimensional and Occlusal Accuracy of Non-Working Antagonist Casts: A Study on Different Impression Materials and 3D Printing.

BACKGROUND The aim of this study was to assess and compare the vertical/horizontal dimensions and occlusal accuracy of non-working/opposing casts obtained from three different impression materials and 3D print cast. MATERIAL AND METHODS Dentulous Master models simulating a case of a fixed dental prosthesis were mounted on an articulator (control group). Opposing mandibular casts obtained from three different impression materialsand 3-dimensional print constituted test groups , ,and , respectively. Three points, anterior vertical (AV), posterior vertical (PV), and anteroposterior (AP) were compared for dimensional accuracy among casts. Occlusal accuracy was analyzed on Medit Link software at 3 teeth (#13, #17, and #27). After calculating means for each group, the differences were calculated at probability value of P≤0.05 using the single-sample t test, ANOVA, and Tukey test. RESULTS The dimensions were significantly different from those of the mounted master models except in Gp AL(E) and Gp AL(F) at AV dimension and Gp AL(E) at AP dimension (P>0.05). A statistically significant difference of the error of means among the 4 tested groupswere detected only at 2 dimensions (AV and PV) between the Gp AL(E) and Gp 3D-C and between Gp AL(F) and Gp 3D-C groups. Other groups showed no significant differences. CONCLUSIONS The opposing casts obtained from the extended-pour alginate and alginate alternative impression materials showed higher occlusal accuracy compared to conventional alginate and 3D printed casts.

Influence of Prosthodontic Rehabilitation Using Zygomatic Implants in Covid 19 Related Mucormycosis (Rhino-Orbital-Cerebral) Maxillectomy Patients Upon Post-Operative Stress, Anxiety and Functional Impairment: A Prospective Cohort Study.

Purpose: To determine the influence of prosthodontic rehabilitation using zygomatic implants in partial maxillectomy upon post-operative stress, anxiety and functional impairment, due to covid 19 associated rhino-orbital-cerebral mucormycosis (ROCM). Patients and Methods: Twenty maxillectomy patients fulfilling study criterion, received zygomatic implants (ZI) (quad zygoma) (ZDI Simpladent, Switzerland) retained/supported complete maxillary denture. Assessment of stress, anxiety, masticatory performance and speech were determined using diurnal salivary cortisol level, Appearance Anxiety Inventory, multiple sieve technique and auditory perception analysis, respectively. Data were recorded at 6 different stages of rehabilitation (after maxillectomy, implant placement, and after prosthesis delivery (1 week, 1 month, 6 months and 1 year)). Demographic data were expressed as frequency distribution, while mean values were used to find differences between various rehabilitation stages using Friedman and chi-square test with statistical significance value at p < 0.05. Results: Average daily salivary cortisol levels declined from post maxillectomy (22.80 ± 0.902) to 1 year after prosthesis wearing (8.65 ± 0.985), indicating stress reduction after ZI rehabilitation. Mean scores for appearance anxiety reduced from pre-prosthetic rehabilitation (27.350 ± 3.030) to 1 year (8.950 ± 0.887) following prosthesis wearing. Functional parameters for mastication and speech also improved significantly during the course of rehabilitation. All differences between pre-prosthetic to 1-year stage after prosthesis wearing were found to be statistically significant at p < 0.05. Conclusion: Post ROCM maxillectomy cases after prosthetic rehabilitation using zygomatic implants showed significant improvement in the psychological (stress and anxiety) as well as function (mastication and speech) characteristics. Rehabilitation post ROCM maxillectomy with the present approach of fixed prosthesis using zygomatic implants mitigates deficient mastication and speech. It also impacts positively on patient psychology by decreasing stress and anxiety.

Comparison of Composite Resin (Duo-Shade) Shade Guide with Vita Ceramic Shades Before and After Chemical and Autoclave Sterilization.

BACKGROUND This study aimed to compare a composite resin (Duo-Shade) shade guide with Vita ceramic shades before/after chemical and autoclave sterilization. MATERIAL AND METHODS Color values (L*a*b*) were recorded directly from shade tabs of prefabricated composite resin (Brilliant NG Universal Duo-Shade) and ceramic (Vita classic) shade guide with a calibrated spectrophotometer (Vita Easy Shade Advance 4.0). Seventy-two composite resin disk samples with 6 different shades (A1/B1, A2/B2, A3/D3, A3.5/B3, A4/C4, and C2/C3) (n=12 each) were divided into 2 groups (Gp) - Gp A (Autoclave) and Gp C (Chemical) (15 cycles) - to assess their influence on respective shades. Mean values calculated the color differences (ΔE) while differences in color values (L*a*b*) were graded on the National Bureau of Standards (NBS) 6-grade scale and assessed for Clinical Acceptance/Perceptible Threshold (CAT), (CPT). All differences were considered significant if the color difference ΔE was ≥3.3. RESULTS Only 2 out of 12 Shade tabs (C2C3, A4C4) of composite resin matched to Vita shade tab C2 and C4 (ΔE ≤3.3). Both groups showed notable color differences after respective sterilization protocols, with color differences in Gp A significantly higher than Gp C (DE ³3.3). Within groups, all shades in Gp A showed remarkably different color changes, with shade C2C3 and A1B1 being denoted as clinically unacceptable. CONCLUSIONS Manufacturer-provided shade guides do not match ceramic shades as claimed and chemical sterilization using 10% Deconex was associated with less color changes than with autoclave sterilization.

A Clinical Study of 50 Partially Edentulous Patients with Fixed Partial Denture Restorations to Compare Clinical Parameters and Changes in Gingival Sulcus Width After Displacement with 2 Different Gingival Retraction Cord Materials (Cotton and Polymer).

BACKGROUND The present study aimed to compare the clinical performance and gingival sulcus width changes in partially edentulous patients using cotton and polymer gingival retraction cords. MATERIAL AND METHODS Fifty partially edentulous patients were divided into 2 groups (Gp C and Gp P) and were subjected to single crown/fixed partial denture treatment. Clinical parameters, including plaque index scores, placement time, and hemorrhage control scores, were assessed. Gingival sulcus width changes before and after retraction were evaluated using individual type 4 dental stone dies observed under an optical microscope. Statistical analysis was performed using dependent/independent t tests. RESULTS The mean placement time, hemorrhage control time, and hemorrhagic scores were lower in Gp P than in Gp C, indicating better clinical performance of polymer-based retraction cord. Both groups showed an increase in sulcus width after retraction, but Gp P had a significantly higher sulcus width (690.03±45.37) compared to Gp C (471.38±28.13). The mean difference in sulcus width between baseline and after retraction was also significantly higher in Gp P (525.84 micrometers) than in Gp C (309.11 micrometers). CONCLUSIONS The present study shows that polymer-based cords produce more sulcus width and have better clinical performance compared to cotton-based gingival retraction cords. These results suggest that the use of polymer-based retraction cords can improve the quality of dental impressions in partially edentulous patients.

A Scanning Electron Microscopy Study Comparing 3 Obturation Techniques to Seal Dentin to Root Canal Bioceramic Sealer in 30 Freshly Extracted Mandibular Second Premolars.

BACKGROUND Obturation is a crucial step in dentistry, involving the filling and sealing of a prepared root canal with sealer and core material to prevent bacterial invasion and ensure successful treatment. This study employed scanning electron microscopy to compare the effectiveness of 3 obturation techniques - single-cone technique (SCT), cold lateral compaction technique (CLCT), and continuous-wave technique (CWT) - in sealing dentin to recently introduced root canal bioceramic sealer in 30 extracted mandibular second premolars. The goal was to determine the optimal technique for minimizing gaps at the sealer-dentin interface. MATERIAL AND METHODS Thirty premolars were divided into 3 groups (n=10 each) based on obturation technique: SCT, CLCT, and CWT. All groups used CeraSeal bioceramic root canal sealer. Root samples were sectioned at apical, middle, and coronal thirds, and high-resolution scanning electron microscopy was performed to measure marginal/internal gaps. Data were analyzed using one-way ANOVA and Tukey range test, with P≤0.05 considered statistically significant. RESULTS CWT showed fewer voids at all levels, with non-significant differences within a technique. Among the techniques, SCT had the largest mean gaps at all levels [apical (5.43±0.16), middle (5.28±0.20), coronal (5.73±0.24)], while CWT had the smallest mean gaps [apical (3.02±0.19), middle (2.95±0.14), coronal (2.76±0.15)]. The differences in means between techniques were statistically significant (P≤0.05). CONCLUSIONS CWT obturation with CeraSeal root canal sealer produces fewer marginal gaps at the sealer-dentin interface.

A Study of 42 Partially Edentulous Patients with Single-Crown Restorations and Implants to Compare Bone Loss Between Crestal and Subcrestal Endosseous Implant Placement.

BACKGROUND The purpose of the study was to evaluate the influence of dental implant placement at different bone levels upon the resultant postoperative peri-implant bone loss. MATERIAL AND METHODS Forty-two partially edentulous patients seeking implant-supported single-crown restorations were screened followed by segregation into 2 groups (GP), GP E (equicrestal) and GP S (subcrestal) (n=21 each). Sixty endosseous implants (30 each) (Adin Tourage-S, Israel), size 3.5/8 and 4/10 mm for mandibles, were placed using a 2-stage surgical procedure. At 4 to 6 months, straight abutments were attached followed by restoration (Vita Zahnfabrik, Germany). Crestal bone levels (mesial/distal) of implant fixtures were assessed at 5 time intervals (after surgery, and at 3, 6, 9, and 12 months) using digital radiography. Means and standard deviations were calculated, following which the differences were statistically analyzed using ANOVA at P value of <0.05. RESULTS The mean annual bone loss for GP S (1.96 mm) was higher than GP E (1.10 mm). At all studied time intervals, the bone loss for implants in GP S was higher than in GP E (P<0.05). Between time intervals, lowest bone loss was observed on the distal side in GP E (0.11 mm/6-9 month) and the highest bone loss was observed on the distal side of GP S (0.6 mm/9-12 month). Differences in the means between the 2 groups on mesial and distal sides were statistically significant at all time intervals (P<0.05). CONCLUSIONS Subcrestal implant placement was associated with more bone loss than when implants are placed at the crestal level.

Comparative Evaluation of 3 Commercial Mouthwash Formulations on Clinical Parameters of Chronic Gingivitis.

BACKGROUND Chlorhexidine (CHX) is not prescribed as a mouthwash for long-term use; therefore, probiotic/herbal mouthwashes are being investigated. This study compared the effect of 3 commercial mouthwashes on plaque index (PI), gingival index (GI), and bleeding index (BI) in patients with chronic gingivitis. MATERIAL AND METHODS Forty-five patients (all with moderate plaque) were randomly allocated into 3 groups (Gp): Gp 1 (CHX), Gp 2 (Manuka), and Gp 3 (Pro-Dental). Three periodontal clinical parameters - PI, GI, and BI - were recorded at baseline and on days 7, 14, and 28. An oral hygiene maintenance program was followed by a double-blinded intervention (coded bottle containing mouthwash). Both inter-group and intra-group comparisons were made using analysis of variance (ANOVA) with multiple t tests. All probable values were considered to have various levels of significance at P<0.05 or below. RESULTS All indices for all groups showed higher values (mean) at baseline, which were lower on days 7, 14, and 28. No differences in any clinical parameter at any point of time existed between Gp 1 and Gp 2. There were, however, significant differences (P<0.05) between Gp 1/Gp 3 and Gp 2/Gp 3 for all clinical parameters at all observed time periods (days 7, 14, 28). Intra-group comparison for all groups demonstrated highly significant differences between baseline values and other time points. CONCLUSIONS For managing chronic gingivitis, Manuka mouthwash is as effective as a CHX mouthwash, as there were no differences observed in any clinical parameters at any point points.

Impact of an Auditory Mediated Patient Health Education (PHE) Program on Treatment Compliance and Satisfaction Among Patients Seeking Prosthodontic Care During COVID Pandemic - A Prospective Interventional Study.

Background: Patients health education by healthcare workers has been affected by pandemic guidelines. This study aimed to evaluate the influence of an audio-mediated intervention for patient health education (PHE) on treatment compliance and treatment satisfaction among patients seeking prosthodontic treatment during the Covid pandemic. Methods: A total of 666 patients (aged 40-70 years) who fulfilled the study criteria were treated for denture-associated disease. PHE for 5 different categories was performed using an educational audio (MP3) in the experimental group (Group E), and traditional methods (oral/verbal) in the control group (Group C). Patient/clinician satisfaction with the PHE program was evaluated with a pre-validated questionnaire, whereas treatment compliance and satisfaction were evaluated using a denture hygiene index (DHI) and a visual analog scale (VAS). Differences between qualitative variables were determined using the chi-square test, whereas continuous variables were assessed using an unpaired t-test. Differences were considered to be statistically significant at p ≤ 0.05. Results: Patient satisfaction with PHE was significantly higher and differed in the Group E for two parameters: education method (80%), educational material (94%). For all parameters of procedural education, patient/clinician satisfaction was significantly higher for Group E [method (93%), material (85%), patient preparation (89%), personalized education (84%), program (93%)]. From three different ratings of disease education, 70% in Group E rated education as "effective" as compared to 41% in the Group C. Effectiveness of post treatment, education measured through DHI, revealed a lower hygiene score in Group E (m = 1.18) as compared to Group C (m = 2.92), with differences being significant. For treatment satisfaction, patients in Group E rated higher for speech (m = 8.21), ease of chewing (m = 7.36), and general satisfaction (m = 7.9). Conclusion: This study concluded that using audio as a means of imparting PHE positively influences the treatment compliance and satisfaction among outpatients and overcomes the drawback of wearing mask during the pandemic.

A Radiographic Study of the Root-to-Crown Ratio of Natural Permanent Teeth in 81 Saudi Adults.

BACKGROUND The ratio between a tooth root and its crown is an essential diagnostic parameter that determines treatment options. This radiographic study used panoramic dental radiographs or orthopantograms to measure the mean root (R)-to-crown (C) ratios (R/C) of the permanent teeth in 81 Saudi adults. MATERIAL AND METHODS A total of 81 panoramic radiographs of Saudi adult patients (40 males and 41 females) previously treated in the College of Dentistry, Saudi Arabia, aged 16-35 years, were selected. The crown height and root length for each tooth were measured on the digital panoramic radiographs. The correlation coefficient (intra-class) was calculated to assess the intra-examiner reproducibility and a good agreement was achieved (ICC=0.79-0.89). RESULTS For both males and females, the highest mean R/C ratio was for maxillary canine (1.91) and for mandibular second premolar (2.0) while the lowest R/C ratio was for maxillary first molar (1.64) and for mandibular central incisor (1.59). Except for the maxillary second premolar, no significant differences in R/C ratios were observed for maxillary arch. In the mandibular arch, the R/C ratio for lateral incisor, both premolars, and molars differed significantly (P<0.05). Among males, statistically significant differences between teeth existed in R/C ratios for central and lateral incisors, second premolar, and both molars (P>0.05). For females, significant differences between teeth in R/C ratios were observed for both premolars and both molars (P>0.05). CONCLUSIONS This study supports the findings from previous studies that orthopantograms can be used to calculate root/crown ratios, which varies between males and females and the dental arch among Saudi adults.

Sensitizing Family Caregivers to Influence Treatment Compliance among Elderly Neglected Patients-A 2-Year Longitudinal Study Outcome in Completely Edentulous Patients.

Healthcare workers have reported a certain segment of geriatric patients that are suffering from abuse/neglect, which in turn has been associated with anxiety, depression, and helplessness in the individual. Family caregivers (blood relations), being the most common perpetrators of elder abuse and neglect (EAN), have also been shown to respond to sensitization if the type of EAN and the interventions are appropriate. This study was aimed to comparatively analyze the influence of intervention (psychotherapeutic sensitization of FCG) upon long-term (24 months) treatment maintenance and satisfaction in elderly neglected patients. One hundred and fifty patients (aged 41-80 years) suffering from elder neglect (EN) (self-confession) and their respective FCGs, fulfilling the study criteria, participated in this longitudinal 2-year study. The patients were randomly distributed (simple random, convenient) in two equal groups (75 each), namely Group (GP) A (control) and GP B (test). A standardized, complete denture treatment was initiated for all the participants. Both the FCGs and the patients of GP B were sensitized (psychotherapeutic education) for EN, while there was no such intervention in GP A. The influence of such intervention was measured for denture maintenance [denture plaque index (DPI) scores] and treatment satisfaction (10-point visual analog scale). Absolute/relative frequencies and means were major calculations during data analysis. Differences between the groups for any treatment compliance parameter was done through the unpaired t-test, while Karl Pearson's test determined the level of relationship between variables (p-value < 0.05). Decrease in mean DPI scores (suggesting improvement) was seen among patients in GP A from 1 month (m = 2.92) to 24 months (m = 2.77). A negligible increase in DPI scores was observed among patients of GP B from 1 month (m = 1.38) to 24 months (m = 1.44). Differences in mean values between the two groups were statistically significant at 24-month intervals, while the relationship between the variables was nonsignificant. FCG sensitization through psychotherapeutic education shows a long-term positive influence on the treatment compliance (maintenance and satisfaction). Identifying the existence of EAN among geriatric patients, followed by psychotherapeutic education of FCGs is recommended for routine medical and dental long-duration treatment procedures.

Impact of Sensitization of Family Caregivers upon Treatment Compliance among Geriatric Patients Suffering from Elder Abuse and Neglect.

Geriatric patients in various outpatient department (OPDs) have been found to agonize from elder abuse and neglect (EAN). Such suffering imposes depressive states within individuals, which in turn affects treatment compliance. The objective of this study was to evaluate the impact of sensitization (psychotherapeutic) of family caregivers (FCGs) upon two denture treatment parameters (maintenance and treatment satisfaction) among EAN patients and compare the differences in outcome with non-abused patients. A survey of completely edentulous subjects (n = 860, aged 41-80 years) provided a sampling frame of 332 EAN patients from which 150 patients (including FCGs) fulfilling the study criteria were distributed (simple random, convenient) into two groups (Group A-control, Group B-test). FCG sensitization for subjects in Group B was performed by a clinical psychologist in 2-4 short (30 min) sessions. Demographic characteristics (frequency) were measured using a self-reported questionnaire, denture maintenance was measured using a denture hygiene index (scores), and treatment satisfaction was analyzed on a 10-point visual analog scale. Relevant data were calculated for means and absolute/relative frequencies. Any difference between two groups was estimated using an unpaired t-test while the level of relationship was determined by Karl Pearson's test at a p-value of < 0.05. The results showed highest frequency (38.6%) for neglect, with elder neglect (EN) being most common (38.14% alone and 14% in combination). EN was found more if the FCG was a son (52%), in the age group (21-30 years), and with low education and low income (75%). Patients whose FCGs were counselled (Group B) demonstrated low denture plaque scores (mean = 1.38 ± 0.618), while demonstrating comparatively higher scores in six different parameters of treatment satisfaction. Differences between the two groups for both parameters were also found to be statistically significant. Psychotherapeutic counselling in the form of FCG sensitization brings better results of denture maintenance and treatment satisfaction.