Neuroarthropathy in diabetes: pathogenesis of Charcot arthropathy.

Charcot neuroarthropathy is a rare but serious complication of diabetes, causing progressive destruction of the bones and joints of the foot leading to deformity, altered biomechanics and an increased risk of ulceration. Management is complicated by a lack of consensus on diagnostic criteria and an incomplete understanding of the pathogenesis. In this review, we consider recent insights into the development of Charcot neuroarthropathy. It is likely to be dependent on several interrelated factors which may include a genetic pre-disposition in combination with diabetic neuropathy. This leads to decreased neuropeptides (nitric oxide and calcitonin gene-related peptide), which may affect the normal coupling of bone formation and resorption, and increased levels of Receptor activator of nuclear factor kappa-B ligand, potentiating osteoclastogenesis. Repetitive unrecognized trauma due to neuropathy increases levels of pro-inflammatory cytokines (interleukin-1ß, interleukin-6, tumour necrosis factor α) which could also contribute to increased bone resorption, in combination with a pre-inflammatory state, with increased autoimmune reactivity and a profile of monocytes primed to transform into osteoclasts - cluster of differentiation 14 (CD14). Increased blood glucose and loss of circulating Receptor for Advanced Glycation End-Products (AGLEPs), leading to increased non-enzymatic glycation of collagen and accumulation of AGLEPs in the tissues of the foot, may also contribute to the pathological process. An understanding of the relative contributions of each of these mechanisms and a final common pathway for the development of Charcot neuroarthropathy are still lacking. Cite this article: S. E. Johnson-Lynn, A. W. McCaskie, A. P. Coll, A. H. N. Robinson. Neuroarthropathy in diabetes: pathogenesis of Charcot arthropathy. Bone Joint Res 2018;7:373-378. DOI: 10.1302/2046-3758.75.BJR-2017-0334.R1.

Systematic review and meta-analysis of the reliability and discriminative validity of cartilage compositional MRI in knee osteoarthritis.

OBJECTIVE: To assess reliability and discriminative validity of cartilage compositional magnetic resonance imaging (MRI) in knee osteoarthritis (OA). DESIGN: The study was carried out per PRISMA recommendations. We searched MEDLINE and EMBASE (1974 - present) for eligible studies. We performed qualitative synthesis of reliability data. Where data from at least two discrimination studies were available, we estimated pooled standardized mean difference (SMD) between subjects with and without OA. Discrimination analyses compared controls and subjects with mild OA (Kellgren-Lawrence (KL) grade 1-2), severe OA (KL grade 3-4) and OA not otherwise specified (NOS) where not possible to stratify. We assessed quality of the evidence using Quality Appraisal of Diagnostic Reliability (QAREL) and Quality Assessment of Diagnostic Accuracy (QUADAS-2) tools. RESULTS: Fifty-eight studies were included in the reliability analysis and 26 studies were included in the discrimination analysis, with data from a total of 2,007 knees. Intra-observer, inter-observer and test-retest reliability of compositional techniques were excellent with most intraclass correlation coefficients >0.8 and coefficients of variation <10%. T1rho and T2 relaxometry were significant discriminators between subjects with mild OA and controls, and between subjects with OA (NOS) and controls (P < 0.001). T1rho showed best discrimination for mild OA (SMD [95% CI] = 0.73 [0.40 to 1.06], P < 0.001) and OA (NOS) (0.60 [0.41 to 0.80], P < 0.001). Quality of evidence was moderate for both parts of the review. CONCLUSIONS: Cartilage compositional MRI techniques are reliable and, in the case of T1rho and T2 relaxometry, can discriminate between subjects with OA and controls.

Multi- and univariate analyses of the weekend effect for elective lower-limb joint replacements.

Introduction The weekend effect is a perceived difference in outcome between medical care provided at the weekend when compared to that of a weekday. Clearly multifactorial, this effect remains incompletely understood and variable in different clinical contexts. In this study we analyse factors relevant to the weekend effect in elective lower-limb joint replacement at a large NHS multispecialty academic healthcare centre. Materials and Methods We reviewed the electronic medical records of 352 consecutive patients who received an elective primary hip or knee arthroplasty. Patient, clinical and time-related variables were extracted from the records. The data were anonymised, then processed using a combination of uni- and multivariate statistics. Results There is a significant association between the selected weekend effect outcome measure (postoperative length of stay) and patient age, American Society of Anesthesiologists classification, time to first postoperative physiotherapy and time to postoperative radiography but not day of the week of operation. Discussion We were not able to demonstrate a weekend effect in elective lower-limb joint replacement at our institution nor identify a factor that would require additional weekend clinical medical staffing. Rather, resource priorities would seem to include measures to optimise at-risk patients preoperatively and measures to reduce time to physiotherapy and radiography postoperatively. Conclusions Our findings imply that postoperative length of stay could be minimised by strategies relating to patient selection and access to postoperative services. We have also identified a powerful statistical methodology that could be applied to other service evaluations in different clinical contexts.

From needle to knife.

Trauma and Orthopaedic care has been through a rapid evolution over the past few decades. This Editorial discusses some of the advances.

No difference in patellar tracking between symmetrical and asymmetrical femoral component designs in TKA.

PURPOSE: Poor knee extension function after total knee arthroplasty (TKA) is associated with factors including articular geometry and alignment. Femoral trochlear geometry has evolved from symmetrical to become more prominent proximal-laterally, with the groove aligned proximal-lateral to distal-medial. This study in vitro tested the hypothesis that a modern asymmetrical prosthesis would restore patellar tracking and stability to more natural behaviour than an older symmetrical prosthesis. METHODS: Six knees had their patellar tracking measured optically during active knee extension. Medial-lateral force versus displacement stability was measured at fixed angles of knee flexion. The measurements were repeated after inserting each of the symmetrical and asymmetrical TKAs. RESULTS: Significant differences of patellar lateral displacement stability, compared to normal, were not found at any angle of knee flexion. The patella tracked medial-laterally within 2.5 mm of the natural path with both TKAs. However, for both TKAs near knee extension, the patella was tilted laterally by approximately 6° and was also flexed approximately 8° more than in the natural knee. CONCLUSION: The hypothesis was not supported: The more anatomical component design did not provide more anatomical patellar kinematics and stability.

Effect of electrochemical structuring of Ti6Al4V on osteoblast behaviour in vitro.

Topography and surface chemistry have a profound effect on the way in which cells interact with an implant, which in turn impacts on clinical use and performance. In this paper we examine an electrochemical polishing approach in H2SO4/methanol that can be applied to the widely used orthopaedic/dentistry implant material, Ti6Al4V, to produce structured surfaces. The surface roughness, as characterized by R(a), was found to be dependent on the time of electropolishing but not on the voltage parameters used here. The surface chemistry, however, was dependent on the applied electrochemical potential. It was found that the chemical composition of the surface layer was modified during the electrochemical process, and at high potentials (9.0 V) a pure TiO2 layer of at least 10 nm was created on top of the bulk alloy. Characterization of these surfaces with rat cells from the osteoblast lineage provided further evidence of contact guidance by microscale topography with morphology analysis correlating with surface roughness (R(a) 300­550 nm). Formation of a bone-like matrix after long-term culture on these surfaces was not strongly dependent upon R(a) values but followed the voltage parameter. These findings suggest that the surfaces created by treatment at higher voltages (9.0 V) produced a nanoscale layer of pure TiO2 on the Ti6Al4V surface that influenced the programme of cellular differentiation culminating in osteogenesis.

Outcome following knee arthroplasty beyond 15 years.

There is a paucity of information detailing functional outcome following total knee arthroplasty for this length of follow-up. We collected data from 187 knees in 150 surviving patients, beyond 15 years from implantation. Survival of the implant was confirmed and a patient administered questionnaire including WOMAC, SF-36 and patient satisfaction was used, data was scrutinised for differences between primary and revision knee surgery. Seventy knees were revised at a mean of 10.8 years. The mean WOMAC Pain score was 72 indicating predominantly mild pain. The mean WOMAC Function scores were lower at 55 indicating moderate limitation of most activities. No significant differences were found between revised and un-revised patients. Long-term pain and satisfaction scores in this population were good illustrating the benefits of TKA in the long term even in patients who have undergone revision surgery.

Adolescent musculoskeletal injuries in a football academy.

Interest in football continues to increase, with ever younger age groups participating at a competitive level. Football academies have sprung up under the umbrella of professional clubs in an attempt to nurture and develop such talent in a safe manner. However, increased participation predisposes the immature skeleton to injury. Over a five-year period we have prospectively collected data concerning all injuries presenting to the medical team at Newcastle United football academy. We identified 685 injuries in our cohort of 210 players with a mean age of 13.5 years (9 to 18). The majority of injuries (542;79%) were to the lower limb. A total of 20 surgical procedures were performed. Contact injuries accounted for 31% (210) of all injuries and non-contact for 69% (475). The peaks of injury occurred in early September and March. The 15- and 16-year-old age group appeared most at risk, independent of hours of participation. Strategies to minimise injury may be applicable in both the academy setting and the wider general community.

Should we reconsider all-polyethylene tibial implants in total knee replacement?

The role of modular tibial implants in total knee replacement is not fully defined. We performed a prospective randomised controlled clinical trial using radiostereophotogrammetric analysis to compare the performance of an all-polyethylene tibia with a metal-backed cruciate-retaining condylar design, PFC-Sigma total knee replacement for up to 24 months. There were 51 patients who were randomised into two treatment groups. There were 10 subsequent withdrawals, leaving 21 all-polyethylene and 20 metal-backed tibial implants. No patient was lost to follow-up. There were no significant demographic differences between the groups. At two years one metal-backed implant showed migration > 1 mm, but no polyethylene implant reached this level. There was a significant increase in the SF-12 and Oxford knee scores after operation in both groups. In an uncomplicated primary total knee replacement the all-polyethylene PFC-Sigma tibial prosthesis showed no statistical difference in migration from that of the metal-backed counterpart. There was no difference in the clinical results as assessed by the SF-12, the Oxford knee score, alignment or range of movement at 24 months, although these assessment measures were not statistically powered in this study.

Are national guidelines for total hip replacement in the UK reflected in practice?

INTRODUCTION: A cross-sectional study was performed to compare the practice of total hip replacement (THR) in the UK against national guidelines. MATERIALS AND METHODS: A postal questionnaire was sent to all fellows of the British Orthopaedic Association. RESULTS: Of the 1587 questionnaires sent out, 966 (60.9%) were returned. Of these, 706 (73.1%) were available for data collection and analysis. CONCLUSIONS: Consensus was observed in several areas including the use of pre-admission clinics and modern cementing techniques. Facilities deemed necessary for THR surgery such as HDU/ITU back-up, ultra-clean air and dedicated orthopaedic wards are almost universally available. However, a lack of consensus is evident in many areas including the process of obtaining written consent, thrombo-embolic prophylaxis, duration of antibiotic prophylaxis, supervision of trainee surgeons and follow-up arrangements. The proliferation in the range of implants, particularly aimed at 'younger' patients, available to surgeons has once again been highlighted.

Removal of acetabular bone in resurfacing arthroplasty of the hip: a comparison with hybrid total hip arthroplasty.

Resurfacing arthroplasty of the hip is being performed more frequently in the United Kingdom. The majority of these patients are younger than 55 years of age, and in this group the key benefits include conservation of femoral bone stock and the potential reduction in the rate of dislocation afforded by the larger resurfacing head. Early aseptic loosening is well recognised in patients younger than 55 years of age, and proponents of resurfacing believe that the improved wear characteristics of the metal-on-metal bearing may improve the long-term survival of this implant. There has been some concern, however, that resurfacing may not be conservative of acetabular bone. We compared a series of 33 consecutive patients who had a hybrid total hip arthroplasty with an uncemented acetabular component and a cemented femoral implant, with 35 patients undergoing a Birmingham hip resurfacing arthroplasty. We compared the diameter of the implanted acetabulum in both groups and, because they were not directly comparable, we corrected for patient size by measuring the diameter of the contralateral femoral head. The data were analysed using unpaired t-tests and analysis of covariance. There was a significantly larger acetabulum in the Birmingham arthroplasty group (mean diameter 56.6 mm vs 52.0 mm; p < 0.001). However, this group had a significantly larger femoral head diameter on the contralateral side (p = 0.03). Analysis of covariance revealed a significant difference between the mean size of the acetabular component implanted in the two operations. The greatest difference in the size of acetabulum was in those patients with a larger diameter of the femoral head. This study shows that more bone is removed from the acetabulum in hip resurfacing than during hybrid total hip arthroplasty, a difference which is most marked in larger patients.

Dynamic creep and mechanical characteristics of SmartSet GHV bone cement.

The restrained dynamic creep behaviour and mechanical properties of SmartSet GHV bone cement have been investigated at both room temperature and body temperature. It was found that the bone cement behaves significant differently at room temperature from that at body temperature. The test temperature had a strong effect on the creep performance of the bone cements with a higher creep rate observed at body temperature at each loading cycle. For both temperatures, two stages of creep were identified with a higher creep rate during early cycling followed by a steady state creep rate. The relationship between creep deformation and loading cycle can be expressed by a Hyperb 1 model. As a visco-elastic material, the sensitivity of bone cement to the temperature change was evident during mechanical testing. Compared to the mechanical strength at room temperature, a decreased value was demonstrated at body temperature. The bending modulus was very sensitive to the change in testing temperature, where a reduction of 52% was recorded. A significant reduction in compressive and bending strength, 31 and 23% were recorded respectively. The effect of temperature on bending strength was less apparent, where only 13% reduction was exhibited at body temperature compared to room temperature.

Comparison of offset in Birmingham hip resurfacing and hybrid total hip arthroplasty.

Hip resurfacing is being performed more frequently in the United Kingdom. The possible benefits include more accurate restoration of leg length, femoral offset and femoral anteversion than occurs after total hip arthroplasty (THA). We compared anteroposterior radiographs from 26 patients who had undergone hybrid THA (uncemented cup/cemented stem), with 28 who had undergone Birmingham Hip Resurfacing arthroplasty (BHR). We measured the femoral offset, femoral length, acetabular offset and acetabular height with reference to the normal contralateral hip. The data were analysed by paired t-tests. There was a significant reduction in femoral offset (p = 0.0004) and increase in length (p = 0.001) in the BHR group. In the THA group, there was a significant reduction in acetabular offset (p = 0.0003), but femoral offset and overall hip length were restored accurately. We conclude that hip resurfacing does not restore hip mechanics as accurately as THA.

Pre-heating of components in cemented total hip arthroplasty.

Fatigue fractures which originate at stress-concentrating voids located at the implant-cement interface are a potential cause of septic loosening of cemented femoral components. Heating of the component to 44 degrees C is known to reduce the porosity of the cement-prosthesis interface. The temperature of the cement-bone interface was recorded intra-operatively as 32.3 degrees C. A simulated femoral model was devised to study the effect of heating of the component on the implant-cement interface. Heating of the implant and vacuum mixing have a synergistic effect on the porosity of the implant-cement interface, and heating also reverses the gradients of microhardness in the mantle. Heating of the implant also reduces porosity at the interface depending on the temperature. A minimum difference in temperature between the implant and the bone of 3 degrees C was required to produce this effect. The optimal difference was 7 degrees C, representing a balance between maximal reduction of porosity and an increased risk of thermal injury. Using contemporary cementing techniques, heating the implant to 40 degrees C is recommended to produce an optimum effect.

Opsonization of polyethylene wear particles regulates macrophage and osteoblast responses in vitro.

The cellular reaction to wear debris may result in the failure of an artificial joint's fixation to the skeleton. The influence of debris opsinization on cell activity has received little attention. This study seeks to establish whether different proteinaceous culture environments may invoke variant cellular responses to debris challenge. Consideration of the zeta potential of a low density polyethylene particle group and an ex vitro ultrahigh molecular weight polyethylene particle group revealed that the nature of the protein adsorbants is related to the concentration of the proteins in solution. Furthermore, the composition of the adsorbed layer was shown to vary with the spectra of proteins in solution. In standard cell culture conditions zeta potential approached zero, indicating the high probability of particle agglomeration. Cell challenge studies with U937 macrophages showed that BSA and FCS protein adsorption mediated increased cell adhesion, while bovine IgG showed little change over control values. No changes in behavior of osteoblastic cells were observed in similar experiments.

The use of digital X-ray radiogrammetry and peripheral dual energy X-ray absorptiometry in patients attending fracture clinic after distal forearm fracture.

Despite the fact that 50% of postmenopausal women with Colles' fracture have evidence of osteoporosis, the vast majority of women with forearm fractures are neither investigated nor treated for osteoporosis. Digital X-ray radiogrammetry (DXR) provides an attractive option in patients with distal forearm fracture, as it requires no additional X-rays over and above those performed as part of clinical management. We have compared DXR analysis of nonstandardised plain films taken routinely in accident and emergency with peripheral dual energy X-ray absorptiometry (pDXA) in a group presenting with distal forearm fracture. Women presenting with a fracture of the distal forearm underwent pDXA measurements of the calcaneus. Plain X-rays performed at the time of presentation were taken to allow adequate fracture treatment. No additional radiographer training or standardisation of films was performed. The DXR technique relies upon visualisation of the metacarpal shafts and this was not visualised on 123 of 201 (61%) films. The AP plain film was thus assessed using DXR for BMD in the remaining 78 patients with a mean age of 70.6 years (SE = 1.3). Mean BMD for DXR was 0.46 g/cm2 (SE = 0.01) and for pDXA was 0.40 g/cm2 (SE = 0.01). The correlation between BMD measured using the two techniques was 0.55 (P < 0.001). Although DXR measurements could not be performed in all patients, this proportion could easily be increased by routinely including the metacarpal shaft region in X-rays obtained after suspected distal forearm fracture. The correlation between the pDXA and DXR results is comparable with those reported between DXA measurements at the forearm, spine and hip. Our study suggests that DXR may provide a feasible method for the assessment of future fracture risk. The potential advantage of DXR over calcaneal pDXA measurements is that standard forearm X-ray obtained as part of fracture management could be used.

A preliminary hip joint simulator study of the migration of a cemented femoral stem.

A hip joint simulator that can be used to evaluate the outcome of the cemented total hip replacement has been designed, manufactured and evaluated. The simulator produces motion of a cemented hip construct in the extension/flexion plane, with a socket to rotate internal/externally. At the same time a dynamic loading cycle is applied to the construct. A validation test was performed on a cemented femoral stem within a novel composite femur. The study demonstrates the value of using a hip joint simulator to evaluate the outcome of the cemented hip construct. A complex migration pattern of the cemented hip prosthesis with respect to load cycling was observed, demonstrated in vitro comparable prosthesis migration behaviour, both the stem migration and migration patterns, to that found clinically.

Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements.

The restrained dynamic creep behaviors of two clinical bone cements, Palacos R-40 and CMW1 have been investigated at room temperature and body temperature. It was found that the two cements demonstrated significantly different creep deformations, with Palacos R-40 bone cement demonstrating higher creep strain than CMW1 bone cement at each loading cycle. For both cements, two stages of creep were identified with a higher creep rate during early cycling followed by a steady-state creep rate. The test temperature had a strong effect on the creep performance of the bone cements with higher creep rate observed at body temperature. The relationship between creep deformation and loading cycles can be expressed by single logarithmic model. The SEM examinations revealed that CMW1 bone cement is more sensitive to defects within the specimen especially to the defects at the edges of the specimen than Palacos R-40 bone cement. However, in the absence of micro-cracks or defects within the inner surface layer, the dynamic loading (at less than 10.6 MPa) is unlikely to produce micro-cracks in the CMW1 bone cement. The different behaviors between the two bone cements may be attributed to differences in chemical compositions and molecular weight distributions.

Some failure modes of four clinical bone cements.

The fracture or failure behaviours of four commercial acrylic-based bone cements have been examined in tensile, bending and compression modes, and their mechanical properties are reviewed. It was found that Palacos R-40 bone cement had high radiopaque agent concentration, with high surface hardness. It exhibited a much lower bending strength and bending modulus compared with the other three bone cements (CMW1, CMW2000 and Simplex P). The textures of tensile fracture surfaces produced were similar for the four bone cements studied. The fracture surface was fragmented by crevices, which developed through the matrix and around large undissolved polymethylmethacrylate (PMMA) beads. Three bands with different features existed on the bending fracture surfaces, with an abrupt transition between them. It appears that the agglomerates of zirconium dioxide particles are implicated in Palacos R-40 bone cement fracture surface. The examination of compressive failed specimens revealed that a 'yielded crack band' existed across the transverse section. Plastic deformation resulted in the PMMA beads being squashed in the longitudinal direction and dilated in the transverse direction.