Effects of hemagglutinin fusion peptide on poly(ethylene glycol)-mediated fusion of phosphatidylcholine vesicles.

The effects of hemagglutinin (HA) fusion peptide (X-31) on poly(ethylene glycol)- (PEG-) mediated vesicle fusion in three different vesicle systems have been compared: dioleoylphosphatidylcholine (DOPC) small unilamellar vesicles (SUV) and large unilamellar vesicles (LUV) and palmitoyloleoylphosphatidylcholine (POPC) large unilamellar perturbed vesicles (pert. LUV). POPC LUVs were asymmetrically perturbed by hydrolyzing 2.5% of the outer leaflet lipid with phospholipase A(2) and removing hydrolysis products with BSA. The mixing of vesicle contents showed that these perturbed vesicles fused in the presence of PEG as did DOPC SUV, but unperturbed LUV did not. Fusion peptide had different effects on the fusion of these different types of vesicles: fusion was not induced in the absence of PEG or in unperturbed DOPC LUV even in the presence of PEG. Fusion was enhanced in DOPC SUV at low peptide surface occupancy but hindered at high surface occupancy. Finally, fusion was hindered in proportion to peptide concentration in perturbed POPC LUV. Contents leakage assays demonstrated that the peptide enhanced leakage in all vesicles. The peptide enhanced lipid transfer between both fusogenic and nonfusogenic vesicles. Peptide binding was detected in terms of enhanced tryptophan fluorescence or through transfer of tryptophan excited-state energy to membrane-bound diphenylhexatriene (DPH). The peptide had a higher affinity for vesicles with packing defects (SUV and perturbed LUV). Quasi-elastic light scattering (QELS) indicated that the peptide caused vesicles to aggregate. We conclude that binding of the fusion peptide to vesicle membranes has a significant effect on membrane properties but does not induce fusion. Indeed, the fusion peptide inhibited fusion of perturbed LUV. It can, however, enhance fusion between highly curved membranes that normally fuse when brought into close contact by PEG.

Identification of Proteus mirabilis mutants with increased sensitivity to antimicrobial peptides.

Antimicrobial peptides (APs) are important components of the innate defenses of animals, plants, and microorganisms. However, some bacterial pathogens are resistant to the action of APs. For example, Proteus mirabilis is highly resistant to the action of APs, such as polymyxin B (PM), protegrin, and the synthetic protegrin analog IB-367. To better understand this resistance, a transposon mutagenesis approach was used to generate P. mirabilis mutants sensitive to APs. Four unique PM-sensitive mutants of P. mirabilis were identified (these mutants were >2 to >128 times more sensitive than the wild type). Two of these mutants were also sensitive to IB-367 (16 and 128 times more sensitive than the wild type). Lipopolysaccharide (LPS) profiles of the PM- and protegrin-sensitive mutants demonstrated marked differences in both the lipid A and O-antigen regions, while the PM-sensitive mutants appeared to have alterations of either lipid A or O antigen. Matrix-assisted laser desorption ionization-time of flight mass spectrometry analysis of the wild-type and PM-sensitive mutant lipid A showed species with one or two aminoarabinose groups, while lipid A from the PM- and protegrin-sensitive mutants was devoid of aminoarabinose. When the mutants were streaked on an agar-containing medium, the swarming motility of the PM- and protegrin-sensitive mutants was completely inhibited and the swarming motility of the mutants sensitive to only PM was markedly decreased. DNA sequence analysis of the mutagenized loci revealed similarities to an O-acetyltransferase (PM and protegrin sensitive) and ATP synthase and sap loci (PM sensitive). These data further support the role of LPS modifications as an elaborate mechanism in the resistance of certain bacterial species to APs and suggest that LPS surface charge alterations may play a role in P. mirabilis swarming motility.

ScFv multimers of the anti-neuraminidase antibody NC10: shortening of the linker in single-chain Fv fragment assembled in V(L) to V(H) orientation drives the formation of dimers, trimers, tetramers and higher molecular mass multimers.

Synthetic genes encoding single-chain variable fragments (scFvs) of NC10 anti-neuraminidase antibody were constructed by joining the V(L) and V(H) domains with linkers of fifteen, five, four, three, two, one and zero residues. These V(L)-V(H) constructs were expressed in Escherichia coli and the resulting proteins were characterized and compared with the previously characterized NC10 scFv proteins assembled in V(H)-V(L) orientation. Size-exclusion chromatography and electron microscope images of complexes formed between various NC10 scFvs and anti-idiotype Fab' were used to analyse the oligomeric status of these scFvs. The result showed that as the linker length between V(L) and V(H) was reduced, different patterns of oligomerization were observed compared with those with V(H)-V(L) isomers. As was the case for V(H)-V(L) orientation, the scFv-15 V(L)-V(H) protein existed mainly as a monomer whereas dimer (diabody) was a predominant conformation for the scFv-5, scFv-4 and scFv-3 V(L)-V(H) proteins. In contrast to the V(H)-V(L) isomer, direct ligation of V(L) to V(H) led to the formation of predominantly a tetramer (tetrabody) rather than to an expected trimer (triabody). Furthermore, the transition between dimers and higher order oligomers was not as distinct as for V(H)-V(L). Thus reducing the linker length in V(L)-V(H) from three to two residues did not precisely dictate a transition between dimers and tetramers. Instead, two-residue as well as one-residue linked scFvs formed a mixture of dimers, trimers and tetramers.

Constitutive mutations of the Salmonella enterica serovar Typhimurium transcriptional virulence regulator phoP.

The PhoP-PhoQ two-component system is necessary for the virulence of Salmonella spp. and is responsible for regulating several modifications of the lipopolysaccharide (LPS). Mutagenesis of the transcriptional regulator phoP resulted in the identification of a mutant able to activate transcription of regulated genes approximately 100-fold in the absence of PhoQ. Sequence analysis showed two single-base alterations resulting in amino acid changes at positions 93 (S93N) and 203 (Q203R). These mutations were individually created, and although each resulted in a constitutive phenotype, the double mutant displayed a synergistic effect both in the induction of PhoP-activated gene expression and in resistance to antimicrobial peptides. The constitutive phoP gene was placed under the control of an arabinose-inducible promoter to examine the kinetics of PhoP-activated gene induction and the resultant modifications of LPS. Gene induction and 2-hydroxymyristate modification of the lipid A were shown to occur within minutes of the addition of arabinose and to peak at 4 h. As the first constitutive mutant of phoP identified, this allele will be invaluable to future genetic and biochemical studies of this and likely other regulatory systems.

Structural basis for dimerization of the Dictyostelium gelation factor (ABP120) rod.

Gelation factor (ABP120) is one of the principal actin-cross-linking proteins of Dictyostelium discoideum. The extended molecule has an N-terminal 250-residue actin-binding domain and a rod constructed from six 100-residue repeats that have an Ig fold. The ability to dimerize is crucial to the actin cross-linking function of gelation factor and is mediated by the rod in which the two chains are arranged in an antiparallel fashion. We report the 2.2 A resolution crystal structure of rod domains 5 and 6, which shows that dimerization is mediated primarily by rod domain 6 and is the result of a double edge-to-edge extension of beta-sheets. Thus, contrary to earlier proposals, the chains of the dimeric gelation factor molecule overlap only within domain 6, and domains 1-5 do not pair with domains from the other chain. This information allows construction of a model of the gelation factor molecule and suggests how the chains in the related molecule filamin (ABP280) may interact.

scFv multimers of the anti-neuraminidase antibody NC10: length of the linker between VH and VL domains dictates precisely the transition between diabodies and triabodies.

Single-chain Fv antibody fragments (scFvs) incorporate a polypeptide linker to tether the VH and VL domains together. An scFv molecule with a linker 5-12 residues long cannot fold into a functional Fv domain and instead associates with a second scFv molecule to form a bivalent dimer (diabody). Direct ligation of VH and VL domains further restricts association and forces three scFv molecules to associate into a trivalent trimer (triabody). We have defined the effect of linker length on scFv association by constructing a series of scFvs from anti-neuraminidase antibody NC10 in which the linker varied from one to four glycine residues. NC10 scFv molecules containing linkers of three and four residues showed a strong preference for dimer formation (diabodies), whereas a linker length of one or two glycine residues prevented the formation of diabodies and directed scFv association into trimers (triabodies). The data suggest a relatively strict transition from dimer (diabody) to trimer (triabody) upon reduction of the linker length from three to two glycine residues. Modelling studies are consistent with three residues as the minimum linker length compatible with diabody formation. Electron microscope images of complexes formed between the NC10 scFv multimers and an anti-idiotype Fab' showed that the dimer was bivalent for antigen binding and the trimer was trivalent.

Engineered mutants in the switch II loop of Ran define the contribution made by key residues to the interaction with nuclear transport factor 2 (NTF2) and the role of this interaction in nuclear protein import.

Nuclear protein import requires a precisely choreographed series of interactions between nuclear pore components and soluble factors such as importin-beta, Ran, and nuclear transport factor 2 (NTF2). We used the crystal structure of the GDPRan-NTF2 complex to design mutants in the switch II loop of Ran to probe the contribution of Lys71, Phe72 and Arg76 to this interaction. X-ray crystallography showed that the F72Y, F72W and R76E mutations did not introduce major structural changes into the mutant Ran. The GDP-bound form of the switch II mutants showed no detectable binding to NTF2, providing direct evidence that salt bridges involving Lys71 and Arg76 and burying Phe72 are all crucial for the interaction between Ran and NTF2. Nuclear protein accumulation in digitonin-permeabilzed cells was impaired with Ran mutants deficient in NTF2 binding, confirming that the NTF2-Ran interaction is required for efficient transport. We used mutants of the yeast Ran homologue Gsp1p to investigate the effect of the F72Y and R76E mutations in vivo. Although neither mutant was viable when integrated into the genome as a single copy, yeast mildly overexpressing the Gsp1p mutant corresponding Ran F72Y on a centromeric plasmid were viable, confirming that this mutant retained the essential properties of wild-type Ran. However, yeast expressing the Gsp1p mutant corresponding to R76E to comparable levels were not viable, although strains overexpressing the mutant to higher levels using an episomal 2micrometers plasmid were viable, indicating that the R76E mutation may also have interfered with other interactions made by Gsp1p.

Three-dimensional structures of single-chain Fv-neuraminidase complexes.

The structure of the complex between a recombinant single-chain Fv construct of antibody NC10 with a five-residue peptide linker between VH and VL (termed scFv(5)), and its antigen, tetrameric neuraminidase from influenza virus (NA), has been determined and refined at 2.5 A resolution. The antibody-antigen binding interface is very similar to that of a similar NC10 scFv-NA complex in which the scFv has a 15-residue peptide linker (scFv(15)), and the NC10 Fab-NA complex. However, scFv(5) and scFv(15) have different stoichiometries in solution. While scFv(15) is predominantly monomeric in solution, scFv(5) forms dimers exclusively, because the five-residue linker is not long enough to permit VH and VL domains from the same polypeptide associating and forming an antigen-binding site. Upon forming a complex with NA, scFv(15) forms a approximately 300 kDa complex corresponding to one NA tetramer binding four scFv(15) monomers, while scFv(5) forms a approximately 590 kDa complex, corresponding to two NA tetramers crosslinked by four bivalent scFv(5) dimers. However, the dimeric scFv(5) in the scFv(5)-NA crystals does not crosslink NA tetramers, and modelling studies indicate that it is not possible to pack four dimeric and simultaneously bivalent scFvs between the NA tetramers with only a five-residue linker between VH and VL. The inability arises from the exacting requirement to orient the two antigen-binding surfaces to bind the tetrameric NA antigen while avoiding steric clashes with NC10 scFv(5) dimers bound to other sites on the NA tetramer. The utility of bivalent or bifunctional scFvs with short linkers may therefore be restricted by the steric constraints imposed by binding multivalent antigens.

Structural basis for molecular recognition between nuclear transport factor 2 (NTF2) and the GDP-bound form of the Ras-family GTPase Ran.

Nuclear transport factor 2 (NTF2) and the Ras-family GTPase Ran are two soluble components of the nuclear protein import machinery. NTF2 binds GDP-Ran selectively and this interaction is important for efficient nuclear protein import in vivo. We have used X-ray crystallography to determine the structure of the macromolecular complex formed between GDP-Ran and nuclear transport factor 2 (NTF2) at 2.5 A resolution. The interaction interface involves primarily the putative switch II loop of Ran (residues 65 to 78) and the hydrophobic cavity and surrounding surface of NTF2. The major contribution to the interaction made by the switch II loop accounts for the ability of NTF2 to discriminate between GDP and GTP-bound forms of Ran. The aromatic side-chain of Ran Phe72 inserts into the NTF2 cavity and accounts for 22% of the surface area buried by the interaction interface, while salt bridges are formed between Lys71 and Arg76 of Ran with Asp92/Asp94 and Glu42 of NTF2, respectively. These salt bridges account for the inhibition of the Ran-NTF2 interaction by NTF2 mutants such as E42 K and D92/94N in which the negatively charged residues surrounding the cavity were altered. Because the interaction interface maintains the positions of key Ran residues involved in binding MgGDP, NTF2 binding may help stabilize the switch state of Ran, possibly in the context of targeting it to other components of the nuclear protein import machinery to specify directionality of transport. The binding of GDP-Ran at the NTF2 cavity raises the possibility that this interaction might be modulated by a metabolite or small molecule substrate for NTF2's putative enzymatic activity.

Structural basis for amoeboid motility in nematode sperm.

Cell locomotion in amoeboid nematode sperm is generated by the vectorial assembly and bundling of filaments of the major sperm protein (MSP). MSP filaments are constructed from two helical subfilaments and here we describe the structure of putative MSP subfilament helices determined by X-ray crystallography at 3.3 A resolution. In addition to establishing the interfaces involved in polymerization, this structural model shows that the MSP helices are constructed from dimers and have no overall polarity, suggesting that it is unlikely that molecular motors play a direct role in the generation of protrusive force in these amoeboid cells.

The structure of the Q69L mutant of GDP-Ran shows a major conformational change in the switch II loop that accounts for its failure to bind nuclear transport factor 2 (NTF2).

We report the 2.3 A resolution X-ray crystal structure of the GDP-bound form of the RanQ69L mutant that is used extensively in studies of nucleocytoplasmic transport and cell-cycle progression. When the structure of GDP-RanQ69L from monoclinic crystals with P21 symmetry was compared with the structure of wild-type Ran obtained from monoclinic crystals, the Q69L mutant showed a large conformational change in residues 68-74, which are in the switch II region of the molecule which changes conformation in response to nucleotide state and which forms the major interaction interface with nuclear transport factor 2 (NTF2, sometimes called p10). This conformational change alters the positions of key residues such as Lys71, Phe72 and Arg76 that are crucial for the interaction of GDP-Ran with NTF2 and indeed, solution binding studies were unable to detect any interaction between NTF2 and GDP-RanQ69L under conditions where GDP-Ran bound effectively. This interaction between NTF2 and GDP-Ran is required for efficient nuclear protein import and may function between the docking and translocation steps of the pathway.

Nuclear protein import is decreased by engineered mutants of nuclear transport factor 2 (NTF2) that do not bind GDP-Ran.

Nuclear transport factor 2 (NTF2) is associated with the translocation stage of nuclear protein import and binds both to nuclear pore proteins (nucleoporins) containing phenylalanine-rich repeats and to the Ras family GTPase Ran. In this study we probed the role of the NTF2-Ran interaction in nuclear protein import using site-directed mutants of NTF2 that interfere with its interaction with GDP-Ran. The design of these mutants was based on the X-ray crystal structure of NTF2 and was concentrated on conserved residues in and around the molecule's hydrophobic cavity. The mutant NTF2 cDNAs were expressed in Escherichia coli. Purified mutant proteins retained the interaction with FxFG-repeat nucleoporins, but several mutants in the negatively charged residues that surround the NTF2 cavity or in residues in the cavity itself were unable to bind GDP-Ran in vitro. The crystal structure of the E42K mutant protein showed significant structural changes only in this side-chain, indicating that it participated directly in the interaction with GDP-Ran. In permeabilised cell nuclear protein import assays, only wild-type NTF2 and mutants that bound GDP-Ran were functional. Furthermore, when the NTF2 E42K and D92N/D94N NTF2 mutants that failed to bind GDP-Ran in vitro were substituted for the chromosomal yeast NTF2, the yeast cells became non-viable, whereas yeast substituted with wild-type human NTF2 remained viable. We conclude that interaction between NTF2 and GDP-Ran is important for efficient nuclear protein import.

The 1.8 A crystal structure of winged bean albumin 1, the major albumin from Psophocarpus tetragonolobus (L.) DC.

Winged bean albumin-1 (WBA) is the main seed albumin of Psophocarpus tetragonolobus, a legume that has excellent potential as a protein-rich food source for humid tropical climates. WBA crystallises in a tetragonal space group and the structure was solved by X-ray crystallography with a combination of multiple isomorphous replacement using four heavy atom derivatives and molecular replacement with a model based on the structure of Erythrina caffra trypsin inhibitor (ETI). Refinement of the structure proceeded to 1.8 A. WBA has a beta-trefoil fold, similar to that found in the STI-Kunitz type trypsin inhibitors. The final structure has an overall R-factor of 19% for 15 to 1.8 A resolution data, all residues in the allowed regions of the Ramachandran plot, and good agreement with ideal geometry. WBA has sequence similarity with the STI-Kunitz trypsin inhibitors, including the apparent conservation of the functional reactive site residue, lysine 64, at the position of the scissile bond (position P1) in the STI-Kunitz type trypsin inhibitors, however, WBA does not inhibit trypsin. The reason for the lack of inhibitory activity against trypsin is clearly evident from the structure. The loop corresponding to the inhibitory loop in the STI-Kunitz trypsin inhibitors does not conform to the canonical conformation of the inhibitory loops of the "small inhibitors". The lysine residue assigned to the P1 position from sequence alignments is instead part of a four amino acid insertion between residues structurally equivalent to residues P1 and P2 of the inhibitors.

Electrostatic complementarity at protein/protein interfaces.

Calculation of the electrostatic potential of protein-protein complexes has led to the general assertion that protein-protein interfaces display "charge complementarity" and "electrostatic complementarity". In this study, quantitative measures for these two terms are developed and used to investigate protein-protein interfaces in a rigorous manner. Charge complementarity (CC) was defined using the correlation of charges on nearest neighbour atoms at the interface. All 12 protein-protein interfaces studied had insignificantly small CC values. Therefore, the term charge complementarity is not appropriate for the description of protein-protein interfaces when used in the sense measured by CC. Electrostatic complementarity (EC) was defined using the correlation of surface electrostatic potential at protein-protein interfaces. All twelve protein-protein interfaces studied had significant EC values, and thus the assertion that protein-protein association involves surfaces with complementary electrostatic potential was substantially confirmed. The term electrostatic complementarity can therefore be used to describe protein-protein interfaces when used in the sense measured by EC. Taken together, the results for CC and EC demonstrate the relevance of the long-range effects of charges, as described by the electrostatic potential at the binding interface. The EC value did not partition the complexes by type such as antigen-antibody and proteinase-inhibitor, as measures of the geometrical complementarity at protein-protein interfaces have done. The EC value was also not directly related to the number of salt bridges in the interface, and neutralisation of these salt bridges showed that other charges also contributed significantly to electrostatic complementarity and electrostatic interactions between the proteins. Electrostatic complementarity as defined by EC was extended to investigate the electrostatic similarity at the surface of influenza virus neuraminidase where the epitopes of two monoclonal antibodies, NC10 and NC41, overlap. Although NC10 and NC41 both have quite high values of EC for their interaction with neuraminidase, the similarity in electrostatic potential generated by the two on the overlapping region of the epitopes is insignificant. Thus, it is possible for two antibodies to recognise the electrostatic surface of a protein in dissimilar ways.

Single-chain Fv fragments of anti-neuraminidase antibody NC10 containing five- and ten-residue linkers form dimers and with zero-residue linker a trimer.

Single-chain variable fragments (scFvs) of anti-neuraminidase antibody NC10 were constructed by joining the VH and VL domains with 10-residue (Gly4Ser)2 and five-residue (Gly4Ser) linkers; a zero-residue linker scFv was constructed by joining the C-terminal residue of the VH domain to the N-terminus of the VL domain. The scFv with the 10- and five-residue linkers exclusively formed dimeric antibody fragments (M(r) 52000). These were shown to be bivalent and were able to cross-link two neuraminidase tetramers to form a 'sandwich' type complex; each antigen combining site could also bind an anti-idiotype Fab'. The zero-residue linker scFv (M(r) 70000) was shown to form a trimer with three active antigen combining sites, each binding an anti-idiotype Fab' to yield a complex of M(r) 212000. The orientation of the combining sites in the zero-residue linker scFv, however, was such that it could not cross-link tetramers of neuraminidase. BIAcore biosensor experiments showed that the affinity of each individual antigen combining site in both the 10- and five-residue linker scFv dimers and zero-residue linker scFv trimer was essentially the same when the scFvs were immobilized onto the sensor surface. However, when the scFvs were used as the analyte, the dimeric and trimeric scFvs showed an apparent increase in binding affinity due to the avidity of binding the multivalent scFvs.

Crystallization and preliminary X-Ray diffraction characterization of a dimerizing fragment of the rod domain of the Dictyostelium gelation factor (ABP-120).

We have expressed in Escherichia coli a construct corresponding to sequence repeats 5 and 6 of the rod domain of the actin-binding protein Dictyostelium gelation factor (ABP-120). We have obtained orthorhombic P212121 crystals of the protein with a = 43.5 A, b = 103.2 A, c = 124.4 A. These crystals diffract past 2.2 A resolution using synchrotron radiation and are suitable for high-resolution structural analysis. ABP-120 is a key component of the Dictyostelium cytoskeleton, where it functions to crosslink F-actin filaments into networks. This crosslinking function of ABP-120 depends crucially on the formation of dimeric molecules that contain an actin-binding site on each chain, and this dimerization is brought about through interactions between repeating sequence modules in the rod domain. Because the construct we have expressed retains the ability to dimerize, it should enable us to establish the precise manner in which these sequence repeats interact with one another in the intact molecule.