Geobacillus stearothermophilus and Bacillus atrophaeus spores exhibit linear inactivation kinetic performance when treated with an industrial scale vaporized hydrogen peroxide (VH2O2) sterilization process.

AIMS: This study aims to determine the inactivation kinetics of Geobacillus stearothermophilus and Bacillus atrophaeus biological indicators, treated with vaporized hydrogen peroxide (VH2O2) at an industrial scale. There is an assumption that sterilization processes generate linear kinetic plots of treated biological indicators that are used for informing probability-based decision-making by the MedTech industry for effective sterilization treatments; however, this has not been reported for sterilization using VH2O2. METHODS AND RESULTS: Survivor curves were generated, and sterilization performances were separately determined using G. stearothermophilus and B. atrophaeus biological indicators following the development of appropriate process challenge devices (PCDs). Regression analysis revealed that the inactivation kinetics for VH2O2-treated microorganisms exhibited log linear profiles. The use of scanning electron microscope (SEM) revealed no significant topographical changes in the outer surface of these VH2O2-treated spores. CONCLUSIONS: Both biological indicators exhibited log linear inactivation kinetics when treated with an industrial scale vaporized hydrogen peroxide (VH2O2) sterilization process. Therefore, this novel finding corroborates and proves the appropriateness of using VH2O2 as a sterilization method in accordance with applicable ISO standards.

Principles of Parametric Release: Emphasis on Data Collection and Interpretation.

Parametric release, which relies on use of process data for product release, provides many benefits. However, adoption by the sterilization industry has been slow, with release typically involving biological indicator (BI) growth responses/ dosimetry readings. The current article highlights how the data provided by the process (described through examples for ethylene oxide [EO], vaporized hydrogen peroxide [VHP], and radiation) may be better used to inform parametric release implementation. The examples involving EO and VHP demonstrated the ability of the sterilization equipment to deliver validated parameters repeatedly after the load presented was validated. For instances in which load variability has not been addressed in performance qualification, BI testing or even measurement of EO concentration cannot reliably or fully inform the impact of such variance on the validated process. "Direct" monitoring of EO concentration is a current requirement in ISO 11135:2014. Nonetheless, the findings presented here show that EO and VHP concentrations can be determined by the calculated method, rendering the use of a concentration measurement probe somewhat superfluous. In alignment with European Union good manufacturing practice Annex 17, a key requirement of parametric release is to have sufficient data to demonstrate the repeatability of the validated process. Similar to gas technologies, radiation processing strives to implement parametric release but is limited by the currently available means of measuring all critical parameters, such as photon delivery.

Advancing the Sustainable Use of Ethylene Oxide through Process Validation.

Based on excellent material compatibility and ability for scale, ethylene oxide (EO) sterilization constitutes approximately 50% of single-use medical device sterilization globally. Epidemiological considerations have elevated focus toward optimization of EO processes, whereby only necessary amounts of sterilant are used in routine processing. EO sterilization of medical devices is validated in accordance with AAMI/ANSI/ISO 11135:2014 via a manner in which a sterility assurance level (SAL) of 10-6 is typically achieved, with multiple layers of conservativeness delivered, using "overkill" approaches to validation. Various optimization strategies are being used throughout the medical device industry to deliver the required SAL while utilizing only necessary amounts of sterilant. This article presents relevant experiences and describes challenges and considerations encountered in delivering EO process optimization. Thus far, the results observed by the authors are encouraging in demonstrating how EO processing can be optimized in the delivery of critical single-use medical devices for patient care.

Potential Induced Radioactivity in Materials Processed with X-ray Energy Above 5 MeV.

Section 5.1.2 of ANSI/AAMI/ISO 11137-1 states that "the potential for induced radioactivity in product shall be assessed." This article describes how compliance with this requirement may be achieved using qualified test methods. Materials of consideration are conceptually discussed, and results of testing conducted on products processed with a 7.5-MeV X-ray irradiation process are provided. As X-ray becomes more widely used in healthcare sterilization, having standard assessment protocols for activation coupled with a shared database of material test results will benefit manufacturers seeking to utilize this innovative technology.

Vaporized Hydrogen Peroxide: A Well-Known Technology with a New Application.

Hydrogen peroxide has a multitude of uses and the vapor form was first identified as a sterilant in late 1970s. Following a number of developments, vaporized hydrogen peroxide (VHP) became widely adopted in early 90s as a substitute for ethylene oxide (EO) in device and instrument processing and reprocessing in healthcare facilities. Often VHP was hailed as the replacement technology for EO. Because of key limitations such as scale, penetration, and compatibility with packaging materials, adoption to terminal sterilization of single-use devices has not commenced to any significant level. However, recent developments in sterilization chamber design and process development provide new opportunity for consideration. For future products, such as those that require "end of production line sterilization," such limitations may be reconsidered and overcome. This article describes those challenges and how they have been addressed, with practical examples. The development of global consensus standards and leveraging the well-established knowledge of VHP sterilization with regard to microorganism inactivation and material compatibility will help facilitate wider consideration of VHP technology as a true alternative to EO in certain product applications.

X-ray: An Effective Photon.

Following years of discussion and debate regarding the economics of X-ray radiation for sterilization of healthcare products, the benefits of the technology are now being realized. X-ray, like gamma radiation, is a process whereby energic photons penetrate to sterilize medical devices. Compared to gamma, photons in the bremsstrahlung spectrum from X-ray radiation allow for improved dose uniformity ratio, higher dose rates, and shorter process time, which provide additional opportunities for sterilization process enhancement. Such improvements may be realized in a number of ways: 1) economic, where more products may be processed on a carrier; 2) improved dose range fit; and/or 3) wider material compatibility. Despite noted benefits, X-ray sterilization has not yet been widely accepted and currently accounts for less than 5% of the contract sterilization market. This article brings X-ray sterilization into focus by sharing knowledge and experience gained over the past 10 years at the STERIS Däniken site, with an aim to identify opportunities for future medical device sterilization.

Correction: Investigating the case of human nose shape and climate adaptation.

[This corrects the article DOI: 10.1371/journal.pgen.1006616.].

Influence of gamma and electron beam sterilization on the stability of a premixed injectable calcium phosphate cement for trauma indications.

Premixed calcium phosphate cements (CPC's) are becoming the material of choice for injectable cements as a result of their effective delivery to the target implantation site. For orthopaedic use, it is of vital importance that the attributes of these CPC's are not compromised by irradiation sterilization. Therefore, the aim of this study is to determine the influence of irradiation sterilization on a range of premixed CPC's, with an emphasis on improving product shelf life through the use of optimal packaging configurations and annealing steps. Electron spin resonance (ESR) confirmed the presence of free radicals in the inorganic phase of the CPC paste following irradiation. The inclusion of a 24-h annealing step was the only successful method in reducing the degree of free radical formation. Based on the results of injectability force testing, it was revealed that an annealing step greater than 24-h significantly altered the viscosity, however; at 24-h the key attributes of the CPC paste were minimally effected. Overall, it was established that vacuum packing the CPC paste, placing the contents into a foil pouch, gamma irradiating at the minimal dose required and using an annealing step of ≤ 24-h, has the potential to extend the shelf life of the cement.

Investigating the case of human nose shape and climate adaptation.

The evolutionary reasons for variation in nose shape across human populations have been subject to continuing debate. An import function of the nose and nasal cavity is to condition inspired air before it reaches the lower respiratory tract. For this reason, it is thought the observed differences in nose shape among populations are not simply the result of genetic drift, but may be adaptations to climate. To address the question of whether local adaptation to climate is responsible for nose shape divergence across populations, we use Qst-Fst comparisons to show that nares width and alar base width are more differentiated across populations than expected under genetic drift alone. To test whether this differentiation is due to climate adaptation, we compared the spatial distribution of these variables with the global distribution of temperature, absolute humidity, and relative humidity. We find that width of the nares is correlated with temperature and absolute humidity, but not with relative humidity. We conclude that some aspects of nose shape may indeed have been driven by local adaptation to climate. However, we think that this is a simplified explanation of a very complex evolutionary history, which possibly also involved other non-neutral forces such as sexual selection.

Profiling the allied health staffing of Queensland Health inpatient general rehabilitation units.

OBJECTIVE: The purpose of this paper was to profile staffing levels for allied health (AH) professional and support staff in Queensland Health inpatient general rehabilitation services (at a given point-in-time) and compare them against established profession-specific standards and guidelines in order to provide a reference for future workforce planning for these services. METHODS: A statewide analysis of AH staffing in Queensland Health inpatient general rehabilitation services was undertaken during June-August 2011. Reported full-time equivalent positions (FTE) were compared to several established national and international benchmarks. Patient activity data was used to calculate the average length of stay (ALOS) and Functional Independence Measure (FIM) scores on admission. RESULTS: Sixteen facilities reported 202 FTE for a total of 466 general rehabilitation beds, with a resultant average workforce ratio of 0.43 FTE/bed. While several professional groups within specific services met established benchmarks, the majority failed to reach recommended staffing ratios. More than half the workforce (53%) was entry-level or consolidating clinicians. The FTE/bed ratios were compared against both patient ALOS and FIM scores on admission and showed a poor correlation. CONCLUSION: Across all included services statewide, there was significant variance in AH staffing levels and diversity in skill mix for inpatient general rehabilitation services.

Effects of temperature, packaging and electron beam irradiation processing conditions on the property behaviour of Poly (ether-block-amide) blends.

The radiation stability of Poly (ether-block-amide) (PEBA) blended with a multifunctional phenolic antioxidant and a hindered amide light stabiliser was examined under various temperatures, packaging and electron beam processing conditions. FTIR revealed that there were slight alterations to the PEBA before irradiation; however, these became more pronounced following irradiation. The effect of varying the temperature, packaging and processing conditions on the resultant PEBA properties was apparent. For example, rheology demonstrated that the structural properties could be enhanced by manipulating the aforementioned criteria. Mechanical testing exhibited less radiation resistance when the PEBA samples were vacuum packed and exposed to irradiation. MFI and AFM confirmed that the melting strength and surface topography could be reduced/increased depending on the conditions employed. From this study it was concluded that virgin PEBA submerged in dry ice with non-vacuum packaging during the irradiation process, provided excellent radiation resistance (20.9% improvement) in contrast to the traditional method.

Modeling 3D facial shape from DNA.

Human facial diversity is substantial, complex, and largely scientifically unexplained. We used spatially dense quasi-landmarks to measure face shape in population samples with mixed West African and European ancestry from three locations (United States, Brazil, and Cape Verde). Using bootstrapped response-based imputation modeling (BRIM), we uncover the relationships between facial variation and the effects of sex, genomic ancestry, and a subset of craniofacial candidate genes. The facial effects of these variables are summarized as response-based imputed predictor (RIP) variables, which are validated using self-reported sex, genomic ancestry, and observer-based facial ratings (femininity and proportional ancestry) and judgments (sex and population group). By jointly modeling sex, genomic ancestry, and genotype, the independent effects of particular alleles on facial features can be uncovered. Results on a set of 20 genes showing significant effects on facial features provide support for this approach as a novel means to identify genes affecting normal-range facial features and for approximating the appearance of a face from genetic markers.

Effects of gamma ray and electron beam irradiation on the mechanical, thermal, structural and physicochemical properties of poly (ether-block-amide) thermoplastic elastomers.

Both gamma ray and electron beam irradiation are widely used as a means of medical device sterilisation. However, it is known that the radiation produced by both processes can lead to undesirable changes within biomedical polymers. The main objective of this research was to conduct a comparative study on the two key radiosterilisation methods (gamma ray and electron beam) in order to identify the more detrimental process in terms of the mechanical, structural, chemical and thermal properties of a common biomedical grade polymer. Poly (ether-block-amide) (PEBA) was prepared by injection moulding ASTM testing specimens and these were exposed to an extensive range of irradiation doses (5-200 kGy) in an air atmosphere. The effect of varying the irradiation dose concentration on the resultant PEBA properties was apparent. For instance, the tensile strength, percentage elongation at break and shore D hardness can be increased/decreased by controlling the aforementioned criteria. In addition, it was observed that the stiffness of the material increased with incremental irradiation doses as anticipated. Melt flow index demonstrated a dramatic increase in the melting strength of the material indicating a sharp increase in molecular weight. Conversely, modulated differential scanning calorimetry established that there were no significant alterations to the thermal transitions. Noteworthy trends were observed for the dynamic frequency sweeps of the material, where the crosslink density increased according to an increase in electron beam irradiation dose. Trans-vinylene unsaturations and the carbonyl group concentration increased with an increment in irradiation dose for both processes when observed by FTIR. The relationship between the irradiation dose rate, mechanical properties and the subsequent surface properties of PEBA material is further elucidated throughout this paper. This study revealed that the gamma irradiation process produced more adverse effects in the PEBA material in contrast to the electron beam irradiation process.

The timing of pigmentation lightening in Europeans.

The inverse correlation between skin pigmentation and latitude observed in human populations is thought to have been shaped by selective pressures favoring lighter skin to facilitate vitamin D synthesis in regions far from the equator. Several candidate genes for skin pigmentation have been shown to exhibit patterns of polymorphism that overlap the geospatial variation in skin color. However, little work has focused on estimating the time frame over which skin pigmentation has changed and on the intensity of selection acting on different pigmentation genes. To provide a temporal framework for the evolution of lighter pigmentation, we used forward Monte Carlo simulations coupled with a rejection sampling algorithm to estimate the time of onset of selective sweeps and selection coefficients at four genes associated with this trait in Europeans: KITLG, TYRP1, SLC24A5, and SLC45A2. Using compound haplotype systems consisting of rapidly evolving microsatellites linked to one single-nucleotide polymorphism in each gene, we estimate that the onset of the sweep shared by Europeans and East Asians at KITLG occurred approximately 30,000 years ago, after the out-of-Africa migration, whereas the selective sweeps for the European-specific alleles at TYRP1, SLC24A5, and SLC45A2 started much later, within the last 11,000-19,000 years, well after the first migrations of modern humans into Europe. We suggest that these patterns were influenced by recent increases in size of human populations, which favored the accumulation of advantageous variants at different loci.

Genome-wide association studies of quantitatively measured skin, hair, and eye pigmentation in four European populations.

Pigmentation of the skin, hair, and eyes varies both within and between human populations. Identifying the genes and alleles underlying this variation has been the goal of many candidate gene and several genome-wide association studies (GWAS). Most GWAS for pigmentary traits to date have been based on subjective phenotypes using categorical scales. But skin, hair, and eye pigmentation vary continuously. Here, we seek to characterize quantitative variation in these traits objectively and accurately and to determine their genetic basis. Objective and quantitative measures of skin, hair, and eye color were made using reflectance or digital spectroscopy in Europeans from Ireland, Poland, Italy, and Portugal. A GWAS was conducted for the three quantitative pigmentation phenotypes in 176 women across 313,763 SNP loci, and replication of the most significant associations was attempted in a sample of 294 European men and women from the same countries. We find that the pigmentation phenotypes are highly stratified along axes of European genetic differentiation. The country of sampling explains approximately 35% of the variation in skin pigmentation, 31% of the variation in hair pigmentation, and 40% of the variation in eye pigmentation. All three quantitative phenotypes are correlated with each other. In our two-stage association study, we reproduce the association of rs1667394 at the OCA2/HERC2 locus with eye color but we do not identify new genetic determinants of skin and hair pigmentation supporting the lack of major genes affecting skin and hair color variation within Europe and suggesting that not only careful phenotyping but also larger cohorts are required to understand the genetic architecture of these complex quantitative traits. Interestingly, we also see that in each of these four populations, men are more lightly pigmented in the unexposed skin of the inner arm than women, a fact that is underappreciated and may vary across the world.

Evidence of inbreeding depression on human height.

Stature is a classical and highly heritable complex trait, with 80%-90% of variation explained by genetic factors. In recent years, genome-wide association studies (GWAS) have successfully identified many common additive variants influencing human height; however, little attention has been given to the potential role of recessive genetic effects. Here, we investigated genome-wide recessive effects by an analysis of inbreeding depression on adult height in over 35,000 people from 21 different population samples. We found a highly significant inverse association between height and genome-wide homozygosity, equivalent to a height reduction of up to 3 cm in the offspring of first cousins compared with the offspring of unrelated individuals, an effect which remained after controlling for the effects of socio-economic status, an important confounder (χ(2) = 83.89, df = 1; p = 5.2 × 10(-20)). There was, however, a high degree of heterogeneity among populations: whereas the direction of the effect was consistent across most population samples, the effect size differed significantly among populations. It is likely that this reflects true biological heterogeneity: whether or not an effect can be observed will depend on both the variance in homozygosity in the population and the chance inheritance of individual recessive genotypes. These results predict that multiple, rare, recessive variants influence human height. Although this exploratory work focuses on height alone, the methodology developed is generally applicable to heritable quantitative traits (QT), paving the way for an investigation into inbreeding effects, and therefore genetic architecture, on a range of QT of biomedical importance.

A quantitative-trait genome-wide association study of alcoholism risk in the community: findings and implications.

BACKGROUND: Given moderately strong genetic contributions to variation in alcoholism and heaviness of drinking (50% to 60% heritability) with high correlation of genetic influences, we have conducted a quantitative trait genome-wide association study (GWAS) for phenotypes related to alcohol use and dependence. METHODS: Diagnostic interview and blood/buccal samples were obtained from sibships ascertained through the Australian Twin Registry. Genome-wide single nucleotide polymorphism (SNP) genotyping was performed with 8754 individuals (2062 alcohol-dependent cases) selected for informativeness for alcohol use disorder and associated quantitative traits. Family-based association tests were performed for alcohol dependence, dependence factor score, and heaviness of drinking factor score, with confirmatory case-population control comparisons using an unassessed population control series of 3393 Australians with genome-wide SNP data. RESULTS: No findings reached genome-wide significance (p = 8.4 × 10(-8) for this study), with lowest p value for primary phenotypes of 1.2 × 10(-7). Convergent findings for quantitative consumption and diagnostic and quantitative dependence measures suggest possible roles for a transmembrane protein gene (TMEM108) and for ANKS1A. The major finding, however, was small effect sizes estimated for individual SNPs, suggesting that hundreds of genetic variants make modest contributions (1/4% of variance or less) to alcohol dependence risk. CONCLUSIONS: We conclude that 1) meta-analyses of consumption data may contribute usefully to gene discovery; 2) translation of human alcoholism GWAS results to drug discovery or clinically useful prediction of risk will be challenging; and 3) through accumulation across studies, GWAS data may become valuable for improved genetic risk differentiation in research in biological psychiatry (e.g., prospective high-risk or resilience studies).

Human population dispersal "Out of Africa" estimated from linkage disequilibrium and allele frequencies of SNPs.

Genetic and fossil evidence supports a single, recent (<200,000 yr) origin of modern Homo sapiens in Africa, followed by later population divergence and dispersal across the globe (the "Out of Africa" model). However, there is less agreement on the exact nature of this migration event and dispersal of populations relative to one another. We use the empirically observed genetic correlation structure (or linkage disequilibrium) between 242,000 genome-wide single nucleotide polymorphisms (SNPs) in 17 global populations to reconstruct two key parameters of human evolution: effective population size (N(e)) and population divergence times (T). A linkage disequilibrium (LD)-based approach allows changes in human population size to be traced over time and reveals a substantial reduction in N(e) accompanying the "Out of Africa" exodus as well as the dramatic re-expansion of non-Africans as they spread across the globe. Secondly, two parallel estimates of population divergence times provide clear evidence of population dispersal patterns "Out of Africa" and subsequent dispersal of proto-European and proto-East Asian populations. Estimates of divergence times between European-African and East Asian-African populations are inconsistent with its simplest manifestation: a single dispersal from the continent followed by a split into Western and Eastern Eurasian branches. Rather, population divergence times are consistent with substantial ancient gene flow to the proto-European population after its divergence with proto-East Asians, suggesting distinct, early dispersals of modern H. sapiens from Africa. We use simulated genetic polymorphism data to demonstrate the validity of our conclusions against alternative population demographic scenarios.

Whole-genome genetic diversity in a sample of Australians with deep Aboriginal ancestry.

Australia was probably settled soon after modern humans left Africa, but details of this ancient migration are not well understood. Debate centers on whether the Pleistocene Sahul continent (composed of New Guinea, Australia, and Tasmania) was first settled by a single wave followed by regional divergence into Aboriginal Australian and New Guinean populations (common origin) or whether different parts of the continent were initially populated independently. Australia has been the subject of relatively few DNA studies even though understanding regional variation in genomic structure and diversity will be important if disease-association mapping methods are to be successfully evaluated and applied across populations. We report on a genome-wide investigation of Australian Aboriginal SNP diversity in a sample of participants from the Riverine region. The phylogenetic relationship of these Aboriginal Australians to a range of other global populations demonstrates a deep common origin with Papuan New Guineans and Melanesians, with little evidence of substantial later migration until the very recent arrival of European colonists. The study provides valuable and robust insights into an early and important phase of human colonization of the globe. A broader survey of Australia, including diverse geographic sample populations, will be required to fully appreciate the continent's unique population history and consequent genetic heritage, as well as the importance of both to the understanding of health issues.

A genome-wide association study of Cloninger's temperament scales: implications for the evolutionary genetics of personality.

Variation in personality traits is 30-60% attributed to genetic influences. Attempts to unravel these genetic influences at the molecular level have, so far, been inconclusive. We performed the first genome-wide association study of Cloninger's temperament scales in a sample of 5117 individuals, in order to identify common genetic variants underlying variation in personality. Participants' scores on Harm Avoidance, Novelty Seeking, Reward Dependence, and Persistence were tested for association with 1,252,387 genetic markers. We also performed gene-based association tests and biological pathway analyses. No genetic variants that significantly contribute to personality variation were identified, while our sample provides over 90% power to detect variants that explain only 1% of the trait variance. This indicates that individual common genetic variants of this size or greater do not contribute to personality trait variation, which has important implications regarding the genetic architecture of personality and the evolutionary mechanisms by which heritable variation is maintained.