Effect of Cross-Linked Alginate/Oil Nanoemulsion Coating on Cracking and Quality Parameters of Sweet Cherries.

The cracking of sweet cherries causes significant crop losses. Sweet cherries (cv. Bing) were coated by electro-spraying with an edible nanoemulsion (NE) of alginate and soybean oil with or without a CaCl2 cross-linker to reduce cracking. Coated sweet cherries were stored at 4 °C for 28 d. The barrier and fruit quality properties and nutritional values of the coated cherries were evaluated and compared with those of uncoated sweet cherries. Sweet cherries coated with NE + CaCl2 increased cracking tolerance by 53% and increased firmness. However, coated sweet cherries exhibited a 10% increase in water loss after 28 d due to decreased resistance to water vapor transfer. Coated sweet cherries showed a higher soluble solid content, titratable acidity, antioxidant capacity, and total soluble phenolic content compared with uncoated sweet cherries. Therefore, the use of the NE + CaCl2 coating on sweet cherries can help reduce cracking and maintain their postharvest quality.

Effects of drying processes on composition, microstructure and health aspects from maqui berries.

The aim of this study is to determine the effects of different drying methods, including freeze drying (FD), convective drying, sun drying, infrared drying and vacuum drying (VD), on the chemical composition and microstructure of maqui berries as well as their anti-inflammatory and antidiabetic activities. Results showed that all dried samples have high unsaturated fatty acids contents (up to 83%) and high total dietary fiber contents (above 50%). Also, one hundred grams of dried berries provide between 11 and 21% of the recommended daily intake of α-tocopherol. Moreover, all dried maqui extracts reduced topical inflammation in treated mice. The highest anti-inflammatory effect against phorbol 12-myristate 13-acetate was found for VD and FD samples. Also, all dried maqui extracts showed antidiabetic activity by inhibiting α-glucosidase activity. The highest α-glucosidase inhibition activity was found for FD samples. The different biological activities of the dried maqui berries were related to differences in the extractability of metabolites due to microstructural changes during drying. The results indicated the potential use of dried maqui as a food ingredient with high unsaturated fatty acids, dietary fiber and α-tocopherol or as a natural extract with therapeutic agents.

Recent Advances on Edible Films Based on Fruits and Vegetables-A Review.

Food packaging materials are traditionally expected to contain foodstuffs and protect them from deteriorating agents. Although petroleum-derived polymers have been widely used for this purpose, the rising concern with their nonrenewable and/or nonbiodegradable nature paves the route for the development of greener alternatives, including polysaccharides and polypeptides. The use of these food-grade biomacromolecules, in addition to fruits and vegetables, provides edible packaging with suitable physical-mechanical properties as well as unique sensory and nutritional characteristics. This text reviews the chronological development pathway of films based on fruit and vegetable purees, pomaces, and extracts. Recent advances are extensively reviewed with an emphasis on the role that each film component plays in the resulting materials, whose production methods are examined from a technical standpoint and essential properties are compiled and contrasted to their conventional, synthetic counterparts. Finally, this comprehensive review discusses advantages and limitations of edible films based on fruits and vegetables.

Physical and antibacterial properties of açaí edible films formulated with thyme essential oil and apple skin polyphenols.

UNLABELLED: Thyme essential oil (TEO) and apple skin polyphenols (ASP) are natural compounds considered as generally recognized as safe by FDA, with biological effects against bacteria and fungi. This work aimed to evaluate physical and antimicrobial properties of açaí edible films formulated with TEO and ASP at 3% and 6% (w/w) individually or combined at 3% (w/w) each. Physical properties studied include mechanical resistance, water vapor permeability (WVP), color, and thermal resistance. Antimicrobial activity against Listeria monocytogenes was determined using the overlay diffusion test. Addition of ASP resulted in improved mechanical properties. TEO at 6% (w/w) resulted in increased elongation. ASP films had significant higher WVP than control film. ASP films were lighter and had more red color than other films. Incorporation of ASP resulted in improved film thermal stability, whereas TEO caused rapid thermal decomposition. Presence of clusters was observed on the surface of films. Addition of ASP resulted in a smoother surface, whereas addition of TEO led to the formation of crater-like pits on the film surface. Açaí edible film incorporated with 6% (w/w) TEO presented the highest antimicrobial activity. However, both antimicrobials are necessary in the açaí films in order to obtain edible films with suitable physical-mechanical properties. The results of the present study showed that TEO and ASP can be used to prepare açaí edible films with adequate physical-mechanical properties and antimicrobial activity for food applications by direct contact. PRACTICAL APPLICATION: Developed açaí edible films presented antimicrobial activity against L. monocytogenes and good physical-mechanical properties, showing the potential use of açaí edible films in food preservation.

Nanocellulose reinforced chitosan composite films as affected by nanofiller loading and plasticizer content.

UNLABELLED: Chitosan is a biopolymer obtained by N-deacetylation of chitin, produced from shellfish waste, which may be employed to elaborate edible films or coatings to enhance shelf life of food products. This study was conducted to evaluate the effect of different concentrations of nanofiller (cellulose nanofibers, CNF) and plasticizer (glycerol) on tensile properties (tensile strength-TS, elongation at break-EB, and Young's modulus-YM), water vapor permeability (WVP), and glass transition temperature (T(g)) of chitosan edible films, and to establish a formulation to optimize their properties. The experiment was conducted according to a central composite design, with 2 variables: CNF (0 to 20 g/100 g) and glycerol (0 to 30 g/100 g) concentrations in the film (on a dry basis), which was produced by the so-called casting technique. Most responses (except by EB) were favored by high CNF concentrations and low glycerol contents. The optimization was based on maximizing TS, YM, and T(g), and decreasing WVP, while maintaining a minimum acceptable EB of 10%. The optimum conditions were defined as: glycerol concentration, 18 g/100 g; and CNF concentration, 15 g/100 g. AFM imaging of films suggested good dispersion of the CNF and good CNF-matrix interactions, which explains the good performance of the nanocomposite films. PRACTICAL APPLICATION: Chitosan is a biodegradable polymer which may be used to elaborate edible films or coatings to enhance shelf life of foods. This study demonstrates how cellulose nanofibers (CNF) can improve the mechanical and water vapor barrier properties of chitosan films. A nanocomposite film with 15% CNF and plasticized with 18% glycerol was comparable to some synthetic polymers in terms of strength and stiffness, but with poorer elongation and water vapor barrier, indicating that they can be used for applications that do not require high flexibility and/or water vapor barrier. The more important advantage of such films when compared to synthetic polymer films is their environmentally friendly properties.

Nanocomposite edible films from mango puree reinforced with cellulose nanofibers.

Cellulose nanoreinforcements have been used to improve mechanical and barrier properties of biopolymers, whose performance is usually poor when compared to those of synthetic polymers. Nanocomposite edible films have been developed by adding cellulose nanofibers (CNF) in different concentrations (up to 36 g/100 g) as nanoreinforcement to mango puree based edible films. The effect of CNF was studied in terms of tensile properties, water vapor permeability, and glass transition temperature (T(g)) of the nanocomposite films. CNF were effective in increasing tensile strength, and its effect on Young's modulus was even more noticeable, especially at higher concentrations, suggesting the formation of a fibrillar network within the matrix. The addition of CNF was also effective to improve water vapor barrier of the films. Its influence on T(g) was small but significant. The study demonstrated that the properties of mango puree edible films can be significantly improved through CNF reinforcement.