Characterization of an amplified piezoelectric actuator for multiple reference optical coherence tomography: erratum.

This erratum is submitted to correct information regarding Fig. 8 of Appl. Opt.57, E142 (2018)APOPAI0003-693510.1364/AO.57.00E142.

Application of cmOCT and continuous wavelet transform analysis to the assessment of skin microcirculation dynamics.

Correlation mapping optical coherence tomography (cmOCT) is a powerful technique for the imaging of skin microvessels structure, based on the discrimination of the static and dynamic regions of the tissue. Although the suitability of cmOCT to visualize the microcirculation has been proved in humans and animal models, less evidence has been provided about its application to examine functional dynamics. Therefore, the goal of this research was validating the cmOCT method for the investigation into microvascular function and vasomotion. A spectral domain optical coherence tomography (SD-OCT) device was employed to image 90 sequential three-dimensional (3-D) OCT volumes from the forearm of 12 volunteers during a 25-min postocclusive reactive hyperemia (PORH) test. The volumes were processed using cmOCT to generate blood flow maps at selected cutaneous depths. The maps clearly trace flow variations during the PORH response for both capillaries and arterioles/venules microvascular layers. Continuous blood flow signals were reconstructed from cmOCT maps to study vasomotion by applying wavelet transform spectral analysis, which revealed fluctuations of flow during PORH, reflecting the regulation of microvascular tone mediated by endothelial cells and sympathetic nerves. The results clearly demonstrate that cmOCT allows the generation of functional information that may be used for diagnostic applications.

Simultaneous en-face imaging of multiple layers with multiple reference optical coherence tomography.

A technique based on multiple reference optical coherence tomography (MR-OCT) is proposed for simultaneous imaging at multiple depths. The technique has been validated by imaging a reference sample and a fingerprint in-vivo. The principle of scanning multiple selected layers is shown by imaging a partial fingerprint with 200×200×200 voxels of 3×3×0.5 mm size and obtaining an arbitrary amount of layers merely by digital processing. The spacing among the layers can be adjusted arbitrarily, and the SNR roll-off is shown for three different spacings. At a mirror scan frequency of 1 kHz and an A-line rate of 2 kHz, the acquisition time was 20 s for one volume. The results show the feasibility of the application of layer scanning MR-OCT that uses a partial mirror in the reference arm of the Michelson interferometer. The reduced scan range required for layer scanning allows even higher scan rates that are limited only by the voice coil design and the mass-spring system, e.g., mirror mass, spring constant, and damping.

Development of a first-generation miniature multiple reference optical coherence tomography imaging device.

Multiple reference optical coherence tomography (MR-OCT) is a technology ideally suited to low-cost, compact OCT imaging. This modality is an extension of time-domain OCT with the addition of a partial mirror in front of the reference mirror. This enables extended, simultaneous depth scanning with the relatively short scan range of a miniature voice coil motor on which the scanning mirror is mounted. This work details early stage development of the first iteration of a miniature MR-OCT device. This iteration utilizes a fiber-coupled input from an off-board superluminescent diode. The dimensions of the module are 40 × 57 ?? mm . Off-the-shelf miniature optical components, voice coil motors, and photodetectors are used, with the complexity of design depending on the specific application. The photonic module can be configured as either polarized or nonpolarized and can include balanced detection. The results shown in this work are from the nonpolarized device. The system was characterized through measurement of the input spectrum, axial resolution, and signal-to-noise ratio. Typical B-scans of static and in vivo samples are shown, which illustrate the potential applications for such a technology.

Assessment of curing behavior of light-activated dental composites using intensity correlation based multiple reference optical coherence tomography.

BACKGROUND AND OBJECTIVES: Monitoring the curing kinetics of light-activated resin is a key area of research. These resins are used in restorative applications and particularly in dental applications. They can undergo volumetric shrinkage due to poor control of the depth dependent curing process, modulated by the intensity and duration of the curing light source. This often results in the formation of marginal gaps, causing pain and damage to the restoration site. In this study, we demonstrate the capabilities of a correlation method applied using a multiple references optical coherence tomography (MR-OCT) architecture to monitor the curing of the resin. STUDY DESIGN/MATERIALS AND METHODS: A MR-OCT system is used in this study to monitor the curing of the resin. The system operates at the center wavelength of 1310 nm with an A-scan rate of 1200 A-scans per second. The axial and lateral resolution of the system is ∼13 µm and ∼27 µm. The method to determine the intensity correlation between adjacent B-frames is based on the Pearson correlation coefficient for a region of interest. Calculating the correlation coefficient for multiple B-frames related to the first B-frame at regular spaced time points, shows for a noncured resin a reduction of the correlation coefficient over time due to Brownian motion. The time constant of the reduction of the correlation value is a measure for the progress of the polymerization during LED light irradiation of the resin. The proposed approach is potentially a low-cost, powerful and unique optical imaging modality for measuring the curing behavior of dental resin and other resins, coatings, and adhesives in medical and industrial applications. RESULTS: To demonstrate the proposed method to monitor the curing process, a light-activated resin composite from GRADIA DIRECT ANTERIOR (GC Corporation, Japan) is studied. The curing time of resin was measured and monitored as a function of depth. The correlation coefficient method is highly sensitive to Brownian motion. The process of curing results in a change in intensity as measured by the MR-OCT signal and hence can be monitored using this method. CONCLUSIONS: These results show that MR-OCT has the potential to measure the curing time and monitor the curing process as a function of depth. Moreover, MR-OCT as a product has potential to be compact, low-cost and to fit into a smartphone. Using such a device for monitoring the curing of the resin will be suitable for dentists in stationary and mobile clinical settings.

In vivo full-field en face correlation mapping optical coherence tomography.

A full-field optical coherence tomography (OCT) system has been developed for the purpose of performing nonscanning en face flow imaging. The light source is centered at 840 nm with a bandwidth of 50 nm resulting in an axial resolution of 8 µm in air. Microscope objectives with a numerical aperture of 0.1 were incorporated giving a transverse resolution of 5 µm. A magnification of 5.65 was measured, resulting in a field of view of 1260×945 µm. Pairs of interference fringe images are captured with opposing phase and a two-step phase image reconstruction method is applied to reconstruct each en face image. The OCT frame rate is 10 Hz. A two-dimensional cross-correlation technique is applied to pairs of consecutive en face images in order to distinguish dynamic from static light-scatterers. The feasibility of the method was examined by simulating blood flow by creating a phantom with 5% intralipid solution. In vivo imaging of a Xenopus laevis tadpole was also performed in order to investigate the feasibility of imaging the vascular system. We present for what we believe to be the first time, the application of correlation mapping optical coherence tomography to full-field OCT to provide in vivo functional imaging of blood vessels.

Dynamic microvascular responses with a high speed TiVi imaging system.

TiVi technology presents a high resolution, low speed methodology for imaging microcirculation. Recently, the TiVi system was adapted to produce a high speed system capable of analysing dynamic responses from human tissues at a frame rate of 30 frames per second. We present results based on this system by investigating dynamic responses such as arterial pulsations both from a controlled flow model and in vivo tissue sites. We also quantify the effects of sympathetic vasomotion, a biological effect which is evident in many tissue sites, and show that the effects of arterial pulsations and vasomotion on the resulting TiVi time traces are easily determined.

Tissue viability (TiVi) imaging: temporal effects of local occlusion studies in the volar forearm.

Tissue Viability (TiVi) imaging is a promising new technology for the assessment of microcirculation in the upper human dermis. Although the technique is easily implemented and develops large amounts of observational data, its role in the clinical workplace awaits the development of standardised protocols required for routine clinical practice. The present study investigates the use of TiVi technology in a human, in vivo, localized, skin blood flow occlusion protocol. In this feasibility study, the response of the cutaneous microcirculation after provocation on the volar surface of the forearm was evaluated using a high temporal-low spatial resolution TiVi camera. 19 healthy subjects - 10 female and 9 male - were studied after a localized pressure was applied for 5 different time periods ranging from 5 to 25 seconds. Areas corresponding to 100 x 100 pixels (2.89 cm(2)) were monitored for 60 seconds prior to, during and after each occlusion period. Our results demonstrated the removal of blood from the local area and a hyperaemic response supporting the suitability of TiVi imaging for the generation of detailed provocation response data of relevance for the physiological function of the skin microcirculation in health and disease.