Enhancing the Conductivity and Thermoelectric Performance of Semicrystalline Conducting Polymers through Controlled Tie Chain Incorporation.

Conjugated polymers are promising materials for thermoelectric applications, however, at present few effective and well-understood strategies exist to further advance their thermoelectric performance. Here a new model system is reported for a better understanding of the key factors governing their thermoelectric properties: aligned, ribbon-phase poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) doped by ion-exchange doping. Using a range of microstructural and spectroscopic methods, the effect of controlled incorporation of tie-chains between the crystalline domains is studied through blending of high and low molecular weight chains. The tie chains provide efficient transport pathways between crystalline domains and lead to significantly enhanced electrical conductivity of 4810 S cm-1, which is not accompanied by a reduction in Seebeck coefficient or a large increase in thermal conductivity. Respectable power factors of 173 µW m-1 K-2 are demonstrated in this model system. The approach is generally applicable to a wide range of semicrystalline conjugated polymers and could provide an effective pathway for further enhancing their thermoelectric properties and overcome traditional trade-offs in optimization of thermoelectric performance.

Ordered Perovskite Structure with Functional Units for High Performance and Stable Solar Cells.

Ion migration is one of the most critical challenges that affects the stability of metal-halide perovskite solar cells (PSCs). However, the current arsenal of available strategies for solving this issue is limited. Here, novel perovskite active layers following the concept of ordered structures with functional units (OSFU) to intrinsically suppress ion migration, in which a three-dimensional (3D) perovskite layer is deposited by vapor deposition for light absorption and a 2D layer is deposited by solution process for ion inhibition, are constructed. As a promising result, the activation energy of ion migration increases from 0.36 eV for the conventional perovskite to 0.54 eV for the OSFU perovskite. These devices exhibit substantially enhanced operational stability in comparison with the conventional ones, retaining >85% of their initial efficiencies after 1200 h under ISOS-L-1. Moreover, the OSFU devices show negligible fatigue behavior with a robust performance under light/dark cycling aging test (ISOS-LC-1 protocol), which demonstrates the promising application of functional motif theory in this field.

Aggregation-Induced Emission of Naphthalene Diimides: Effect of Chain Length on Liquid and Solid-Phase Emissive Properties.

The aggregation-induced emission (AIE) properties of a systematic series of naphthalene diimides (NDIs) varying the chain length at the imide positions have been studied. A solvophobic collapse of NDI units through the flash injection of THF NDI solutions in sonicating water triggers the formation of stable suspensions with enhanced fluorescence emissions. Shorter chains favor the π-π stacking of NDI units through H-aggregation producing a strong AIE effect showing remarkably high quantum yields that have not been observed for non core-substitued NDIs previously. On the other hand, NDIs functionalized with longer chains lead to more disordered domains where π-π stacking between NDI units is mainly given by J-aggregation unfavoring the AIE effect.

Visualization of Nanocrystallites in Organic Semiconducting Blends Using Cryo-Electron Microscopy.

The efficiency of an organic solar cell is highly dependent on the complex, interpenetrating morphology, and molecular order within the composite phases of the bulk heterojunction (BHJ) blend. Both these microstructural aspects are strongly influenced by the processing conditions and chemical design of donor/acceptor materials. To establish improved structure-function relationships, it is vital to visualize the local microstructural order to provide specific local information about donor/acceptor interfaces and crystalline texture in BHJ blend films. The visualization of nanocrystallites, however, is difficult due to the complex semi-crystalline structure with few characterization techniques capable of visualizing the molecular ordering of soft materials at the nanoscale. Here, it is demonstrated how cryo-electron microscopy can be utilized to visualize local nanoscale order. This method is used to understand the distribution/orientation of crystallites in a BHJ blend. Long-range (>300 nm) texturing of IEICO-4F crystallites oriented in an edge-on fashion is observed, which has not previously been observed for spin-coated materials. This approach provides a wealth of quantitative information about the texture and size of nanocrystallites, which can be utilized to understand charge generation and transport in organic film. This study guides tailoring the material design and processing conditions for high-performance organic optoelectronic devices.

Incorporating Naphthalene and Halogen into Near-Infrared Double-Cable Conjugated Polymers for Single-Component Organic Solar Cells with Low-Voltage Losses.

The invention of near-infrared pedant-based double-cable conjugated polymers has demonstrated remarkable efficacy in single-component organic solar cells (SCOSCs). This work focuses on the innovative double-cable conjugated polymers aimed at attaining good absorption and suitable energy levels. Specifically, in the aromatic side units, the electron-donating (D) part is designed using a thieno[3,4-c]pyrrole-4,6-dione (TPD) as a core unit, flanked by two cyclopentadithiophene groups on either side. The electron-deficient (A) terminal groups consist of 2-(3-oxo-2,3-dihydro-1H-cyclopenta[b]naphthalen-1-ylidene) malononitrile (NC), which can be further modified through fluorination to modulate the physical properties and packing modes of the acceptor material. The resulting double-cable conjugated polymers exhibit broad absorption spectra spanning 500-850 nm and possess lowered Frontier energy levels when incorporating fluorine elements, providing decreased voltage losses in SCOSCs. Therefore, SCOSCs fabricated using these polymers have demonstrated power conversion efficiencies ranging from 7.6 to 10.2%, in which fluorine-containing double-cable conjugated polymers showed higher PCEs due to more favorable crystalline packing, enhanced exciton dissociation probability, and charge-transporting ability.

A polymer library enables the rapid identification of a highly scalable and efficient donor material for organic solar cells.

The dramatic improvement of the PCE (power conversion efficiency) of organic photovoltaic devices in the past few years has been driven by the development of new polymer donor materials and non-fullerene acceptors (NFAs). In the design of such materials synthetic scalability is often not considered, and hence complicated synthetic protocols are typical for high-performing materials. Here we report an approach to readily introduce a variety of solubilizing groups into a benzo[c][1,2,5]thiadiazole acceptor comonomer. This allowed for the ready preparation of a library of eleven donor polymers of varying side chains and comonomers, which facilitated a rapid screening of properties and photovoltaic device performance. Donor FO6-T emerged as the optimal material, exhibiting good solubility in chlorinated and non-chlorinated solvents and achieving 15.4% PCE with L8BO as the acceptor (15.2% with Y6) and good device stability. FO6-T was readily prepared on the gram scale, and synthetic complexity (SC) analysis highlighted FO6-T as an attractive donor polymer for potential large scale applications.

p-Type Conjugated Polymers Containing Electron-Deficient Pentacyclic Azepinedione.

Bisthienoazepinedione (BTA) has been reported for constructing high-performing p-type conjugated polymers in organic electronics, but the ring extended version of BTA is not well explored. In this work, we report a new synthesis of a key building block to the ring expanded electron-deficient pentacyclic azepinedione (BTTA). Three copolymers of BTAA with benzodithiophene substituted by different side chains are prepared. These polymers exhibit similar energy levels and optical absorption in solution and solid state, while significant differences are revealed in their film morphologies and behavior in transistor and photovoltaic devices. The best-performing polymers in transistor devices contained alkylthienyl side chains on the BDT unit (pBDT-BTTA-2 and pBDT-BTTA-3) and demonstrated maximum saturation hole mobilities of 0.027 and 0.017 cm2 V-1 s-1. Blends of these polymers with PC71BM exhibited a best photovoltaic efficiency of 6.78% for pBDT-BTTA-3-based devices. Changing to a low band gap non-fullerene acceptor (BTP-eC9) resulted in improved efficiency of up to 13.5%. Our results are among the best device performances for BTA and BTTA-based p-type polymers and highlight the versatile applications of this electron-deficient BTTA unit.

Tuning Dipole Orientation of 2,6-Azulene Units in Conjugated Copolymers by C-H Activation Strategy toward High-Performance Organic Semiconductor.

Azulene has aroused widespread interest for constructing optoelectronic materials. However, controlling the dipole orientation of 2,6-azulene units in the conjugated polymer backbone is a significant challenge so far. Herein, by C-H activation strategy, three 2,6-azulene-TPD-based conjugated copolymers with different dipole arrangements were synthesized, where TPD = thieno[3,4-c]pyrrole-4,6-dione. The dipole arrangements of 2,6-azulene units were random for P(AzTPD-1), head-to-head/tail-to-tail for P(AzTPD-2), and head-to-tail for P(AzTPD-3). These polymers exhibited unipolar n-type semiconductor characteristics in organic field effect transistors. Moreover, regioregular polymer P(AzTPD-3) displayed the best device performance with an electron mobility of up to 0.33 cm2 V-1 s-1, which makes P(AzTPD-3) a high-performance n-type polymeric semiconductor. These results demonstrate that incorporation of 2,6-azulene units into the polymeric backbone together with the regulation of the dipole orientation of 2,6-azulene units is an effective strategy for obtaining high-performance organic optoelectronic materials.

Third Crystalline Form of P(NDI2OD-T2) with Pronounced End-on Texture.

We report the observation of a third crystalline polymorph, "form III", of the well-studied electron-transporting conjugated polymer P(NDI2OD-T2) that exhibits end-on texture. This third polymorph of P(NDI2OD-T2) is distinguished from other polymorphs by having two monomer units incorporated along the backbone-stacking direction, resulting in a doubling of the c axis of the unit cell. Form III crystallites are realized by melt-annealing a thin film followed by slow cooling. The distinct packing of this third polymorph is established through the application of grazing-incidence wide-angle X-ray scattering (GIWAXS) measurements combined with peak simulation of candidate unit cells. The discovery of a third polymorph of P(NDI2OD-T2) provides a fresh opportunity for studying structure/function relationships of this important semiconducting polymer.

Improving OFF-State Bias-Stress Stability in High-Mobility Conjugated Polymer Transistors with an Antisolvent Treatment.

Conjugated polymer field-effect transistors are emerging as an enabling technology for flexible electronics due to their excellent mechanical properties combined with sufficiently high charge-carrier mobilities and compatibility with large-area, low-temperature processing. However, their electrical stability remains a concern. ON-state (accumulation mode) bias-stress instabilities in organic semiconductors have been widely studied, and multiple mitigation strategies have been suggested. In contrast, OFF-state (depletion mode) bias-stress instabilities remain poorly understood despite being crucial for many applications in which the transistors are held in their OFF-state for most of the time. Here, a simple method of using an antisolvent treatment is presented to achieve significant improvements in OFF-state bias-stress and environmental stability as well as general device performance for one of the best performing polymers, solution-processable indacenodithiophene-co-benzothiadiazole (IDT-BT). IDT-BT is weakly crystalline, and the notable improvements to an antisolvent-induced, increased degree of crystallinity, resulting in a lower probability of electron trapping and the removal of charge traps is attributed. The work highlights the importance of the microstructure in weakly crystalline polymer films and offers a simple processing strategy for achieving the reliability required for applications in flexible electronics.

Competing single-chain folding and multi-chain aggregation pathways control solution-phase aggregate morphology of organic semiconducting polymers.

Understanding the solution-phase behaviour of organic semiconducting polymers is important for systematically improving the performance of devices based on solution-processed thin films of these molecules. Conventional polymer theory predicts that polymer conformations become more compact as solvent quality decreases, but recent experiments have shown the high-performance organic-semiconducting polymer P(NDI2OD-T2) to form extended rod-like aggregates much larger than a single chain in poor solvents, with the formation of these extended aggregates correlated with enhanced electron mobility in films deposited from these solutions. We explain the unexpected formation of extended aggregates using a novel coarse-grained simulation model of P(NDI2OD-T2) that we have developed to study the effect of solvent quality on its solution-phase behaviour. In poor solvents, we find that aggregation through only a few monomers gives effectively inseparable chains, leading to the formation of extended structures of partially overlapping chains via non-equilibrium assembly. This behaviour requires that multi-chain aggregation occurs faster than chain folding, which we show is the case for the chain lengths and concentrations shown experimentally to form rod-like aggregates. This kinetically controlled process introduces a dependence of aggregate structure on concentration, chain length, and chain flexibility, which we show is able to reconcile experimental findings and is generalisable to the solution-phase assembly of other semiflexible polymers.

Double-Cable Conjugated Polymers with Pendent Near-Infrared Electron Acceptors for Single-Component Organic Solar Cells.

Double-cable conjugated polymers with near-infrared (NIR) electron acceptors are synthesized for use in single-component organic solar cells (SCOSCs). Through the development of a judicious synthetic pathway, the highly sensitive nature of the 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile (IC)-based electron acceptors in basic and protonic solvents is overcome. In addition, an asymmetric design motif is adopted to optimize the packing of donor and acceptor segments, enhancing charge separation efficiency. As such, the new double-cable polymers are successfully applied in SCOSCs, providing an efficiency of over 10 % with a broad photo response from 300 to 850 nm and exhibiting excellent thermal/light stability. These results demonstrate the powerful design of NIR-acceptor-based double-cable polymers and will enable SCOSCs to enter a new stage.

Organic Solar Cell With Efficiency Over 20% and VOC Exceeding 2.1 V Enabled by Tandem With All-Inorganic Perovskite and Thermal Annealing-Free Process.

Organic solar cells (OSCs) based on polymer donor and non-fullerene acceptor achieve power conversion efficiency (PCE) more than 19% but their poor absorption below 550 nm restricts the harvesting of high-energy photons. In contrast, wide bandgap all-inorganic perovskites limit the absorption of low-energy photons and cause serious below bandgap loss. Therefore, a 2-terminal (2T) monolithic perovskite/organic tandem solar cell (TSC) incorporating wide bandgap CsPbI2 Br is demonstrated as front cell absorber and organic PM6:Y6 blend as rear cell absorber, to extend the absorption of OSCs into high-energy photon region. The perovskite sub-cell, featuring a sol-gel prepared ZnO/SnO2 bilayer electron transporting layer, renders a high open-circuit voltage (VOC ). The VOC is further enhanced by employing thermal annealing (TA)-free process in the fabrication of rear sub-cell, demonstrating a record high VOC of 2.116 V. The TA-free Ag/PFN-Br interface in organic sub-cell facilitates charge transport and restrains nonradiative recombination. Consequently, a remarkable PCE of 20.6% is achieved in monolithic 2T-TSCs configuration, which is higher than that of both reported single junction and tandem OSCs, demonstrating that tandem with wide bandgap all-inorganic perovskite is a promising strategy to improve the efficiency of OSCs.

Resolving the backbone tilt of crystalline poly(3-hexylthiophene) with resonant tender X-ray diffraction.

The way in which conjugated polymers pack in the solid state strongly affects the performance of polymer-based optoelectronic devices. However, even for the most crystalline conjugated polymers the precise packing of chains within the unit cell is not well established. Here we show that by performing resonant X-ray diffraction experiments at the sulfur K-edge we are able to resolve the tilting of the planar backbones of crystalline poly(3-hexylthiophene) (P3HT) within the unit cell. This approach exploits the anisotropic nature of the X-ray optical properties of conjugated polymers, enabling us to discern between different proposed crystal structures. By comparing our data with simulations based on different orientations, a tilting of the planar conjugated backbone with respect to the side chain stacking direction of 30 ± 5° is determined.

Revealing the Side-Chain-Dependent Ordering Transition of Highly Crystalline Double-Cable Conjugated Polymers.

We developed a series of highly crystalline double-cable conjugated polymers for application in single-component organic solar cells (SCOSCs). These polymers contain conjugated backbones as electron donor and pendant perylene bisimide units (PBIs) as electron acceptor. PBIs are connected to the backbone via alkyl units varying from hexyl (C6 H12 ) to eicosyl (C20 H40 ) as flexible linkers. For double-cable polymers with short linkers, the PBIs tend to stack in a head-to-head fashion, resulting in large d-spacings (e.g. 64 Šfor the polymer P12 with C12 H24 linker) along the lamellar stacking direction. When the length of the linker groups is longer than a certain length, the PBIs instead adopt a more ordered packing likely via H-aggregation, resulting in short d-spacings (e.g. 50 Šfor the polymer P16 with C16 H32 linker). This work highlights the importance of linker length on the molecular packing of the acceptor units and the influences on the photovoltaic performance of SCOSCs.

Anisotropic Resonant X-ray Diffraction of a Conjugated Polymer at the Sulfur K-Edge.

The planar, aromatic nature of the backbone of conjugated polymers endows them with anisotropic properties. Here we show that the resonant X-ray diffraction of a sulfur-containing semicrystalline conjugated polymer at the sulfur K-edge is highly anisotropic, with strong modulation of diffracted intensity depending upon the relative orientation of the polarization of the incident beam with respect to the diffracting crystal planes. Through determination of the anisotropic resonant scattering factors, we can spectroscopically reproduce the observed resonant anisotropic scattering effects based on a proposed unit cell geometry for the polymer.

Charge transport physics of a unique class of rigid-rod conjugated polymers with fused-ring conjugated units linked by double carbon-carbon bonds.

We investigate the charge transport physics of a previously unidentified class of electron-deficient conjugated polymers that do not contain any single bonds linking monomer units along the backbone but only double-bond linkages. Such polymers would be expected to behave as rigid rods, but little is known about their actual chain conformations and electronic structure. Here, we present a detailed study of the structural and charge transport properties of a family of four such polymers. By adopting a copolymer design, we achieve high electron mobilities up to 0.5 cm2 V-1 s-1 Field-induced electron spin resonance measurements of charge dynamics provide evidence for relatively slow hopping over, however, long distances. Our work provides important insights into the factors that limit charge transport in this unique class of polymers and allows us to identify molecular design strategies for achieving even higher levels of performance.

Detection of Halomethanes Using Cesium Lead Halide Perovskite Nanocrystals.

The extensive use of halomethanes (CH3X, X = F, Cl, Br, I) as refrigerants, propellants, and pesticides has drawn serious concern due to their adverse biological and atmospheric impact. However, there are currently no portable rapid and accurate monitoring systems for their detection. This work introduces an approach for the selective and sensitive detection of halomethanes using photoluminescence spectral shifts in cesium lead halide perovskite nanocrystals. Focusing on iodomethane (CH3I) as a model system, it is shown that cesium lead bromide (CsPbBr3) nanocrystals can undergo rapid (<5 s) halide exchange, but only after exposure to oleylamine to induce nucleophilic substitution of the CH3I and release the iodide species. The extent of the halide exchange is directly dependent on the CH3I concentration, with the photoluminescence emission of the CsPbBr3 nanocrystals exhibiting a redshift of more than 150 nm upon the addition of 10 ppmv of CH3I. This represents the widest detection range and the highest sensitivity to the detection of halomethanes using a low-cost and portable approach reported to date. Furthermore, inherent selectivity for halomethanes compared to other organohalide analogues is achieved through the dramatic differences in their alkylation reactivity.

A NIST facility for resonant soft x-ray scattering measuring nano-scale soft matter structure at NSLS-II.

We present the design and performance of a polarized resonant soft x-ray scattering (RSoXS) station for soft matter characterization built by the national institute of standards and technology at the national synchrotron light source-II (NSLS-II). The RSoXS station is located within the spectroscopy soft and tender beamline suite at NSLS-II located in Brookhaven national laboratory, New York. Numerous elements of the RSoXS station were designed for optimal performance for measurements on soft matter systems, where it is of critical importance to minimize beam damage and maximize collection efficiency of polarized x-rays. These elements include a novel optical design, sample manipulator and sample environments, as well as detector setups. Finally, we will report the performance of the measurement station, including energy resolution, higher harmonic content and suppression methods, the extent and mitigation of the carbon absorption dip on optics, and the range of polarizations available from the elliptically polarized undulator source.

Resonant Tender X-ray Diffraction for Disclosing the Molecular Packing of Paracrystalline Conjugated Polymer Films.

The performance of optoelectronic devices based on conjugated polymers is critically dependent upon molecular packing; however, the paracrystalline nature of these materials limits the amount of information that can be extracted from conventional X-ray diffraction. Resonant diffraction (also known as anomalous diffraction) occurs when the X-ray energy used coincides with an X-ray absorption edge in one of the constituent elements in the sample. The rapid changes in diffraction intensity that occur as the X-ray energy is varied across an absorption edge provide additional information that is lost in a conventional nonresonant experiment. Taking advantage of the fact that many conjugated polymers contain sulfur as heteroatoms, this work reveals pronounced resonant diffraction effects at the sulfur K-edge with a particular focus on the well-studied electron transporting polymer poly([N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)), P(NDI2OD-T2). The observed behavior is found to be consistent with the theory of resonant diffraction, and by simulating the energy-dependent peak intensity based on proposed crystal structures for P(NDI2OD-T2), we find that resonant diffraction can discriminate between different crystalline packing structures. The utilization of resonant diffraction opens up a new way to unlock important microstructural information about conjugated polymers for which only a handful of diffraction peaks are typically available.