Tissue-mimicking composite barrier membranes to prevent abdominal adhesion formation after surgery.

Postoperative abdominal adhesions often occur after abdominal surgery; barrier membranes which mimic peritoneal tissue can be constructed to prevent abdominal adhesions. To this end, silk fibroin (SF) sheets were coated with polyvinyl alcohol (PVA) and agarose (AGA) at PVA:AGA ratios of 100:0, 70:30, 50:50, 30:70, and 0:100 to create a composite anti-adhesive barrier and allow us to identify a suitable coating ratio. The membranes were characterized in terms of their molecular organization, structure, and morphology using Fourier transform Infrared spectrometer (FT-IR), differential scanning calorimeter (DSC), and scanning electron microscope (SEM), respectively. The physical and mechanical properties of the membranes and their biological performance (i.e., fibroblast proliferation and invasion) were tested in vitro. Each membrane showed both smooth and rough surface characteristics. Membranes coated with PVA:AGA at ratios of 100:0, 70:30, 50:50, and 30:70 exhibited more -OH and amide III moieties than those coated with 0:100 PVA:AGA, which consequently affected structural organization, degradation, and fibroblast viability. The 0:100 PVA:AGA-coated degraded the fastest. Barrier membranes coated with 100:0 and 70:30 PVA: AGA demonstrated reduced fibroblast proliferation and attachment. The membrane coated with 70:30 PVA:AGA exhibited a stable appearance, and did not curl under wet conditions. Therefore, SF sheets coated with 70:30 PVA:AGA show promise as anti-adhesive barrier membranes for further development.

Dual functional profluorescent nitroxides for the detection of reactive oxygen species and inhibition of collagen degradation during reassembly.

High content of reactive oxygen species (ROS) in the human body leads to oxidative stress and serious health problems, such as cancer and cardiovascular or bone diseases. It is also one of the agents that cause collagen damage. Herein, detection of ROS, scavenging of formed carbon-centered radicals and inhibition of collagen fragmentation were performed in a single operation using newly synthesized profluorescent nitroxide PN1via a switch-on approach. Reassembly of acid soluble collagen (ASC) in the presence of hydroxyl and hydroperoxyl radicals, representatives of ROS, was monitored to study the efficiency of the PN1 probe. Self-assembly curves of collagen fibril solution were in accordance with differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) observations, and indicated that PN1 efficiently inhibited the collagen chain scission. In order to prevent the leakage of the probe in materials, a PN2 monomer was successfully incorporated with MMA to form a profluorescent copolymer probe. Furthermore, PN1 and PN2-MMA copolymer probes offered high sensitivity of detection of ROS in the presence of collagen fibrils with detection limits of 1.1 and 2.7 µM, respectively. The mechanism of ROS detection and inhibition of collagen degradation by profluorescent nitroxides was proposed.

Bone-mimicking scaffold based on silk fibroin incorporated with hydroxyapatite and titanium oxide as enhanced osteo-conductive material for bone tissue formation: fabrication, characterization, properties, andin vitrotesting.

Bone-mimicking scaffolds based on silk fibroin (SF) mixed with hydroxyapatite nanoparticles (HA NPs) and titanium oxide (TiO2) nanoparticles were created as materials for bone formation. Six scaffold groups were fabricated: S1 (SF), S2 (Silk + (HA: TiO2; 100: 0)), S3 (Silk, (HA: TiO2; 70: 30)), S4 (Silk + (HA NPs: TiO2; 50: 50)), S5 (Silk + (HA: TiO2; 30: 70)), and S6 (Silk + (HA NPs: TiO2; 0:100)). Scaffolds were characterized for molecular formation, structure, and morphology by Fourier transform infrared spectroscopy, element analysis, and X-ray diffraction. They were tested for physical swelling and compressive modulus. Scaffolds were cultured with MC3T3 and testedin vitroto evaluate their biological performance. The results showed that scaffolds with HA and TiO2demonstrated molecular interaction via amide I and phosphate groups. These scaffolds had smaller pore sizes than those without HA and TiO2. They showed more swelling and higher compressive modulus than the scaffolds without HA and TiO2. They exhibited better biological performance: cell adhesion, viability, proliferation, alkaline phosphatase activity, and calcium content than the scaffolds without HA and TiO2. Their porous walls acted as templates for cell aggregation and supported synthesis of calcium secreted from cells. S3 were the most suitable scaffolds. With their enhanced osteo-conductive function, they are promising for bone augmentation for oral and maxillofacial surgery.

Biphasic scaffolds of polyvinyl alcohol/gelatin reinforced with polycaprolactone as biomedical materials supporting for bone augmentation based on anatomical mimicking; fabrication, characterization, physical and mechanical properties, and in vitro testing.

Reinforced biphasic scaffolds were fabricated with based materials design of anatomical mimicking and evaluated to identify the certain application for maxillofacial surgery. The scaffolds created the polyvinyl alcohol (PVA) with a percentage of gelatin of 5% and were coated with polycaprolactone (PCL) that a different number of cycles 0, 1, 5, 10, and 15 cycles (PCL0, PCL1, PCL5, PCL10, and PCL15 were used to fabricate biphasic scaffolds via bubbling and freeze-thawing before reinforce with immersion coating techniques. The structure and morphology of the scaffolds were characterized and observed by a scanning electron microscope, a differential scanning calorimeter, and a thermogravimetric analyzer, respectively. The performance of the scaffolds was tested in terms of their swelling behavior, degradation, and mechanical properties. They were cultured with MC3T3E1 osteoblast cells and L929 fibroblast cells. The main biological performance of cell proliferation was analyzed, and protein synthesis, calcium synthesis, and alkaline phosphatase activity of the scaffolds were studied. Their morphology demonstrated fewer pores when coated with PCL. Mechanical strength of the modified scaffolds increased followed by the cycles of coating with PCL. The scaffolds with more cycle of PCL coating lower swelling and degradability than without PCL coating. They had more thermal stability than the scaffold without PCL coating. The scaffolds with PCL coating demonstrated better bio-functionality to activate cell response than without coating. Finally, the result exhibited that PCL10 provide a suitably reinforced biphasic scaffold with high promise for maxillofacial surgery.

The efficacy of a semi-resorbable membrane based on silk fibroin-Glycerol on bone regeneration in rabbit calvarial defects compared to a commercial collagen membrane.

Silk fibroin-glycerol-based membranes were fabricated and characterized for use as a self-maintaining and non-collapsible semi-resorbable membrane in guided bone regeneration. The study assessed the bone regeneration capacity of silk fibroin-glycerol-based membranes compared to a collagen membrane in 10-mm circular bilateral calvarial defects of 20 male New Zealand white rabbits. The animals were divided into two sets of time frames of 4 and 12 weeks and allocated into four groups (n = 5/group); an empty defect (E), a collagen membrane (Bio-Gide®; BG), a silk fibroin-glycerol-collagen membrane (SGC), and a silk fibroin-glycerol membrane (SG). The bone density (optical density, OD) from the 2D radiographs, tissue reaction from histological sections, new bone volume, and area from micro-CT and the histomorphometry were evaluated. The Mean OD of the E (34.49 ± 14.21%) and BG groups (35.71 ± 9.65%) at 12 weeks were higher than at 4 weeks, but the SGC (39.04 ± 7.94%) and SG (40.96 ± 9.25%) groups were lower at 4 weeks. The new bone volumes at 4 weeks of the SG (24.19 ± 1.35%) and SGC groups (24.19 ± 3.47%) were significantly higher than the BG group (16.93 ± 2.95%) but were not different from the E group (18.39±4.78%). At 12 weeks, the new bone volumes in the SGC (29.09 ± 3.81%), SG (29.11 ± 5.94%), and BG groups (26.26 ± 4.42%) were higher than in the E group (21.63 ± 5.81%) without statistical significance. Histological images in the SGC and SG groups showed slow biodegradation without a foreign body reaction. The new bone area at 4 weeks was lowest in BG (12.95 ± 5.44%), and the others were comparable. At 12 weeks, the new bone area in the E group (23.55±8.69%) was lower than the BG (31.42 ± 6.18%), SG (35.25 ± 13.92%), and SGC groups (36.35 ± 10.23%). Silk fibroin-glycerol-based membranes are semi-resorbable membranes that possess a self-maintaining property, have a barrier function without collapsing, and are successful in facilitating bone regeneration.

Osteoconductive Silk Fibroin Binders for Bone Repair in Alveolar Cleft Palate: Fabrication, Structure, Properties, and In Vitro Testing.

Osteoconductive silk fibroin (SF) binders were fabricated for the bone repair of an alveolar cleft defect. Binders were prefigureared by mixing different ratios of a mixture of random coils and SF aggregation with SF fibrils: 100:0 (SFB100), 75:25 (SFB75), 50:50 (SFB50), 25:75 (SFB25), and 0:100 (SFB0). The gelation, molecular organization, structures, topography, and morphology of the binders were characterized and observed. Their physical, mechanical, and biological properties were tested. The SF binders showed gelation via self-assembly of SF aggregation and fibrillation. SFB75, SFB50, and SFB25 had molecular formation via the amide groups and showed more structural stability than SFB100. The morphology of SFB0 demonstrated the largest pore size. SFB0 showed a lowest hydrophilicity. SFB100 showed the highest SF release. SFB25 had the highest maximum load. SFB50 exhibited the lowest elongation at break. Binders with SF fibrils showed more cell viability and higher cell proliferation, ALP activity, calcium deposition, and protein synthesis than without SF fibrils. Finally, the results were deduced: SFB25 demonstrated suitable performance that is promising for the bone repair of an alveolar cleft defect.

In Vitro Biocompatibility of a Novel Semi-Rigid Shell Barrier System: As a New Application for Guided Bone Regeneration.

This study evaluated the in vitro biocompatibility of a novel, semi-rigid shell barrier system for guided bone regeneration (GBR) based on polycaprolactone and biphasic calcium phosphate membranes and consisting of a semi-rigid shell (SR) and two semi-resorbable barrier membranes, i.e., a buffered (BF) and an airdried (AD) membrane. In vitro biocompatibility, cell cytotoxicity, cell proliferation and differentiation were evaluated with osteoblast (MC3T3-E1) and fibroblast (L929) cells compared to the d-PTFE membrane (Cytoplast®, CP). The osteoblasts and fibroblasts were well attached and proliferated on all materials from days 1, 3, and 7 without cell cytotoxicity. All groups showed that osteoblast and fibroblast cell proliferation increased from day 1 to day 14-17 and decreased on day 21. On day 21, the CP membrane presented significantly higher osteoblast cell numbers than the BF membrane and the SR shell (p = 0.000). The CP membrane presented a significantly higher amount of fibroblast cells than the other groups (p = 0.000). The SR shell and the BF membrane demonstrated higher osteoblast cell differentiation markers including ALP activity, osteocalcin, and mineral secretion than the CP and the AD membrane. The semi-rigid shell barrier system demonstrated good in vitro biocompatibility and supported osteogenic cell proliferation and differentiation better than the d-PTFE membrane.

Microporous surface containing flower-like molybdenum disulfide submicro-spheres of sulfonated polyimide with antibacterial effect and promoting bone regeneration and osteointegration.

Implanted materials with both osteogenic and antibacterial functions are promising for facilitating osteointegration and preventing infection for orthopedic applications. In this work, we synthesized flower-like molybdenum disulfide (fMD) submicro-spheres containing nanosheets, which were incorporated onto the microporous surface of polyimide (PI) via concentrated sulfuric acid, suspending fMD contents of 5 wt% (SPM1) and 10 wt% (SPM2). Compared with sulfonated polyimide (SPM0), both SPM1 and SPM2 with microporous surfaces containing fMD exhibited nano-submicro-microporous surfaces, which improved the surface roughness, wettability, and surface energy. Due to there being more fMD submicro-spheres on the microporous surface, SPM2 revealed a better antibacterial effect than SPM1. In addition, compared with SPM1 and SPM0, SPM2 with more fMD significantly promoted rat bone marrow-derived stromal cell response in vitro. Moreover, SPM2 remarkably enhanced new bone formation and osteointegration in vivo. In summary, the combination of fMD with the microporous surface of SPM2 resulted in a nano-submicro-microporous surface with optimized surface performance, which possessed not only osteogenic bioactivity but also an antibacterial effect. As a bone implant, SPM2 with osteogenic and antibacterial functions may have enormous potential as a bone tissue substitute.

Molybdenum disulfide nanosheet/polyimide composites with improved tribological performances, surface properties, antibacterial effects and osteogenesis for facilitating osseointegration.

Polymeric biocomposites display some advantages over metal or ceramic biomaterials, and are regarded as a promising candidate for artificial joint application. Herein, molybdenum disulfide (MD) nanosheets were prepared and incorporated into polyimide (PI) to form MD/PI composites with a MD content of 20 wt% (PM20) and 40 wt% (PM40). The results revealed that incorporation of MD nanosheets obviously improved the tribological performances, surface properties (e.g., roughness, wettability and surface energy) and protein absorption of the composites, which enhanced with the increase of MD content. In addition, the composites containing MD nanosheets exhibited antibacterial effects, and the antibacterial effects of PM40 were higher than those of PM20 and PI. PM40 significantly stimulated the cellular responses of rat bone mesenchymal stem cells in vitro, which was better than PM20 and PI. Furthermore, PM40 remarkably accelerated osteogenesis and osseointegration in vivo, which was better than PM20 and PI. In summary, the MD content in composites played pivotal roles in improving not only tribological performances, surface properties, antibacterial effects and cellular response in vitro but also osteogenesis and osseointegration in vivo. As a result, PM40 with high MD content exhibited excellent osteogenic bioactivity and antibacterial effects, which would have great potential for artificial joint applications.

Dual-functional bioactive silk sericin for osteoblast responses and osteomyelitis treatment.

Sericin, a natural protein from silk cocoon, has been reported for various biological properties in the biomaterials field. Modified forms of sericin have been studied for bone tissue engineering, while its unmodified form has been scarcely reported. Therefore, the purpose of this study was to evaluate physical and biological properties of unmodified sericin for potential use in bone surgery. Sericin was extracted from silk cocoons using a chemical-free boiling method. Sericin extract showed distinct bands with molecular weight ranging from 25 to 42 kDa including smear bands. Fourier transform infrared spectra presented characteristic peaks of amide I, II, and III, confirming the chemical composition of sericin. Based on biological activity, sericin extract at a concentration of 40 µg/mL increased the proliferation of osteoblast cells up to 135%, compared with the untreated control. Moreover, increase in antibacterial activity against Staphylococcus aureus, both clinical isolates and the reference strain ATCC 29213, was demonstrated for sericin extract with normal saline, while no antibacterial activity was observed for sericin with broth. It was found that sericin with normal saline showed higher zeta potential than sericin without normal saline, indicating higher system stability. This was confirmed by the average particle size of sericin extract with NaCl (3,249.3±226.1 nm) showing approximately 10 times smaller than sericin solution (29,015.9 ± 8,085.6 nm). Furthermore, sericin extract at the minimal inhibitory concentration significantly reduced the biofilm formation of S. aureus up to 95%. The study indicates biological activities of sericin, which could be applied as a dual-functional bioactive material to support bone regeneration and treat bone infections.

Mimicked Periosteum Layer Based on Deposited Particle Silk Fibroin Membrane for Osteogenesis and Guided Bone Regeneration in Alveolar Cleft Surgery: Formation and in Vitro Testing.

An alveolar cleft is a critical tissue defect often treated with surgery. In this research, the mimicked periosteum layer based on deposited silk fibroin membrane was fabricated for guided bone regeneration in alveolar cleft surgery. The deposited silk fibroin particle membranes were fabricated by spray-drying with different concentrations of silk fibroin (v/v): 0.5% silk fibroin (0.5% SFM), 1% silk fibroin (1% SFM), 2% silk fibroin (2% SFM), and 1% silk fibroin film (1% SFF) as the control. The membranes were then characterized and the molecular organization, structure, and morphology were observed with FT-IR, DSC, and SEM. Their physical properties, mechanical properties, swelling, and degradation were tested. The membranes were cultured with osteoblast cells and their biological performance, cell viability and proliferation, total protein, ALP activity, and calcium deposition were evaluated. The results demonstrated that the membranes showed molecular transformation of random coils to beta sheets and stable structures. The membranes had a porous layer. Furthermore, they had more stress and strain, swelling, and degradation than the film. They had more unique cell viability and proliferation, total protein, ALP activity, calcium deposition than the film. The results of the study indicated that 1% SFM is promising for guided bone regeneration for alveolar cleft surgery.

Fabrication and characterization of a semi-rigid shell barrier system made of polycaprolactone and biphasic calcium phosphate: A novel barrier system for bone regeneration.

INTRODUCTION: Nowadays, no barrier membrane serves all purposes of bone augmentation. This study aimed to fabricate a semi-rigid shell barrier system composed of a semi-rigid shell and a covering membrane or a semi-resorbable barrier membrane, based on polycaprolactone (PCL) and biphasic calcium phosphate (BCP) for guided bone regeneration (GBR). MATERIALS AND METHODS: A shell and a covering membrane were fabricated by a solvent casting technique based on PCL (70) and BCP (30). The experimental groups were a semi-rigid shell, an airdried membrane, a buffered membrane, and a commercial d-PTFE as a control. Physico-chemical, mechanical properties, and in vitro biocompatibility with osteoblasts and fibroblasts cells were evaluated in all groups. RESULTS: The fabricated materials had rough surfaces with a homogeneous distribution of BCP particles on one side and a smooth surface on the opposite side. The airdried membrane presented a rougher surface on both top and bottom sides (Sq = 605.45 nm, 556.82 nm) than the semi-rigid shell (310.74 nm, 424.56 nm) and the buffered membrane (277.9 nm, 306.98 nm), respectively. The pore sizes of the airdried membrane (25-40 µm) were larger than the semi-rigid shell (5-40 µm) and the buffered membrane (5-25 µm). The porosities of the airdried and buffered membranes (∼40%) were higher than the semi-rigid shell (∼20%) significantly (p < 0.05). All fabricated materials were hydrophilic, with the lowest water contact angle in the semi-rigid shell (54.7° ± 3.06°), then the airdried (61.15° ± 4.76°), and the buffered (75.74° ± 2.8°) respectively. The semi-rigid shell resisted a higher load on compressive force (18.82 ± 2.72 N) than the d-PTFE membrane (4.23 ± 0.5 N). The tensile stress of the buffered membrane (2.544 ± 0.19 MPa) was not different from the d-PTFE (2.908 ± 0.12 MPa) but was higher than the airdried membrane (1.302 ± 0.13 MPa) significantly (P < 0.05). The airdried membrane had reached 100% swelling ability within 1 h, which was significantly faster than the buffered membrane (12 h) and the semi-rigid shell (7 days), and they were slowly degraded by lysozyme at 6 months (airdried: 24.88% ± 0.96%, buffered: 13.67% ± 0.55%, and semi-rigid: 8.62% ± 0.88%). All fabricated membranes showed no toxicity to osteoblast and fibroblast cells. CONCLUSION: The semi-rigid shell and the covering membranes demonstrated suitable physical and mechanical properties, and biocompatibility, and can be assembled as the novel semi-rigid shell barrier system for bone regeneration.

Physical and biological performances of a semi-resorbable barrier membrane based on silk fibroin-glycerol-fish collagen material for guided bone regeneration.

The fragility of silk fibroin film is a drawback to being used as a barrier membrane. Semi-resorbable barrier membranes maintain function longer than a resorbable membrane and no need to be removed. The study aimed to fabricate semi-resorbable membranes using silk fibroin with glycerol plasticizer (Group A), immobilized with fish collagen (Group B), and then characterized, in vitro biocompatibility tested, and compared with a commercial collagen membrane (Group C). Group B showed more roughness (0.2155 µm) than Group A (0.1424 µm). Group A was more hydrophilic (76.75° ± 3.07°) and more stiffness (28.93% ± 15.56%) than Group B (112.67° ± 1.94°, 42.10% ± 11.46%) and C (54.79% ± 13.44%) without significant difference. Group C had a significantly higher (p < 0.05) swelling degree and less degradation rate than others. Group A showed significantly highest (p < 0.05) cell proliferation. Group C showed more alkaline phosphatase activity than others but no significant difference in osteocalcin and Alizarin Red activity on day 21. The semi-resorbable membrane based on silk fibroin-glycerol possessed good physical and mechanical properties, and well-supported osteoblastic cell proliferation and differentiation.

Constructed microbubble porous scaffolds of polyvinyl alcohol for subchondral bone formation for osteoarthritis surgery.

Osteoarthritis (OA) is a disease that leads to the damage of subchondral bone. To treat OA, patients can have surgery to implant biomaterials into the damaged area. In this research, biomaterials of 3D porous scaffolds were fabricated by the use of air microbubbles for subchondral bone formation proposed for OA surgery. Microbubbles were generated in a polyvinyl alcohol solution at various air flow rates of 20 (F20), 100 (F100), 200 (F200), and 300 (F300) cc min-1. Molecular organization, structure, and morphology of the scaffolds were characterized and observed by Fourier transform infrared spectroscopy, a differential scanning calorimeter, and a scanning electron microscope, respectively. Physical and mechanical properties based on swelling behavior and compressive strength of the scaffolds were also evaluated. Biological performance by means of osteoblast proliferation, protein synthesis, and alkaline phosphatase activity of the scaffolds were studied. The scaffolds showed molecular organization via interaction of -OH and C = O. They had residual water in their structures. The scaffolds exhibited a morphology of a spherical-like cell shape with small pores and a rough surface produced on each cell. Each cell was well connected with the others. The cell size and porous structure of the scaffolds depended significantly on the flow rate used. The molecular organization, structure, and morphology of the scaffolds had an effect on their physical and mechanical properties and biological performance. F100 was found to be an optimum scaffold offering a molecular organization, structure, morphology, physical and mechanical properties, and biological performance which was suitable for subchondral bone formation. This research deduced that the F100 scaffold is promising for OA surgery.

The bone-mimicking effect of calcium phosphate on composite chitosan scaffolds in maxillofacial bone tissue engineering.

This research explored a new trend in biomaterials science. The bone-mimicking effect of calcium phosphate on chitosan composite scaffolds was evaluated. Chitosan with 2% calcium phosphate was found to have suitable bone-mimicking performance for maxillofacial bone tissue engineering.

Bioactive surface-modified Ti with titania nanotube arrays to design endoprosthesis for maxillofacial surgery: structural formation, morphology, physical properties and osseointegration.

Modification of the surface of titanium into titania (TiO2) nanotube (TNT) arrays was performed by electrochemical anodization to design an endoprosthesis for maxillofacial surgery. TNT arrays with different surface structures were successfully coated on titanium substrates by varying the anodizing voltages and annealed at 450 °C for 4 h. The phase composition and morphology of the nanotubes were examined by x-ray powder diffraction and field-emission scanning electron microscopy, respectively. The biological functions and water wettability of various surface structures were also investigated. The results demonstrated that the annealed nanotubes were composed of an anatase phase only at all applied voltages. The tube diameters and lengths increased as the voltage increased. The surfaces with modification had more wettability, cell adhesion, proliferation, alkaline phosphatase activity and calcium deposition than the surfaces without modification. Finally, the results demonstrated that a modified surface of titanium to produce TNT arrays as a biomaterial is promising to design an osseointegrated surface of endoprosthesis for maxillofacial surgery.

Osseointegrated membranes based on electro-spun TiO2/hydroxyapatite/polyurethane for oral maxillofacial surgery.

Membranes which have an osseointegration abilty are often selected as biomaterials in oral and maxillofacial surgery. Although these membranes are often the best option for certain uses, it is a challenge to create functionally attractive membranes. In this research, electro-spun titanium oxide (TiO2)/hydroxyapatite (HA)/polyurethane (PU) membranes were fabricated with different ratios of HA and TiO2: 100: 0, 70:30, 50:50, 30:70 and 0:100 w/w. The morphologies of the different mixtures were assessed with a Scanning Electron Microscope (SEM) and Field Emission Microscope (FESEM). Element analysis was performed with EDX. The physical properties of the water contact angles and mechanical strength were tested and the membranes cultured with osteoblasts to evaluate their biological functions, cell adhesion, viability, proliferation, alkaline phosphatase (ALP) activity, and calcium content. The results showed that the membranes with TiO2 and HA had smaller fibers than those without TiO2 and HA. The TiO2- and HA-including compounds showed the formation of particle aggregation on the surface of the fibers. They also had higher water contact angles, mechanical strength, and stiffness than those without TiO2 and HA, and they had better cell adhesion, viability, proliferation, ALP activity and calcium content. The membrane with a 50:50 TiO2:HA ratio had more unique biological functions than the others. Finally, our research demonstrated that osseointegrated membranes with 50:50 TiO2:HA are promising for oral and maxillofacial surgery.

Mimicked scaffolds based on coated silk woven fabric with gelatin and chitosan for soft tissue defect in oral maxillofacial area.

Soft tissue defects in the oral maxillofacial area are critical problems for many patients and, in some cases, patients require an operation coupled with a performance scaffold substitution. In this research, mimicked anatomical scaffolds were constructed using gelatin- and chitosan-coated woven silk fibroin fabric. The morphologies, crystals, and structures were observed and then characterized using scanning electron microscopy, X-ray diffraction, and differential scanning calorimetry, respectively. Physical performance was evaluated from the swelling behavior, mechanical properties, and biodegradation, while the biological performance was tested with fibroblasts and keratinocytes, after which cell proliferation, viability, and histology were evaluated. The results revealed that a coated woven silk fibroin fabric displayed a crystal structure of silk fibroin with amorphous gelatin and chitosan layers. Also, the coated fabrics contained residual water within their structure. The physical performance of the coated woven silk fibroin fabric with gelatin showed suitable swelling behavior and mechanical properties along with acceptable biodegradation for insertion at a defect site. The biological performances including cell proliferation, viability, and histology were suitable for soft tissue reconstruction at the defect sites. Finally, the results demonstrated that mimicked anatomical scaffolds based on a gelatin layer on woven silk fibroin fabric had the functionality that was promising for soft tissue construction in oral maxillofacial defect.