RESUMO
In this study, a series of eight non-fused rings-based semiconducting acceptors (AR1-AR8) were computationally developed by making modifications to the parent molecule (PTICO). In this study, a DFT analysis was conducted at an accurately chosen level of theory to gather a comprehensive inventory of the optoelectronic characteristics of AR1-AR8 and PTICO. The findings indicate that all recently developed molecules exhibit a bathochromic shift in their maximum UV-visible absorbance (λmax) with a smaller band gap (Eg). AR1 has demonstrated the most significant red shift in UV-visible absorbance and possesses the smallest Eg when compared to other recently developed acceptors. AR2 acceptor has shown the best results both as electron and hole-transporting materials owing to its smallest value of reorganization energy for electrons and holes. J61 donor was engaged to calculate the open-circuit voltage (VOC) and the highest VOC with maximum FF % value was observed in AR4. The investigation of charge transfer was also conducted utilizing J61 in conjunction with the AR4 acceptor. Natural transition orbitals (NTO) have also been inspected to recognize the percentage electron transport contribution (% ETC) from the ground state to the first excites state (S0 to S1). The findings of this research suggest that the modified acceptors exhibit potential for practical implementation in the development of organic solar cells that possess improved photovoltaic performance.
Assuntos
Elétrons , Transporte de ElétronsRESUMO
Despite the substantial advancements in organic solar cells (OSCs), the best devices still have quite low efficiencies due to less focus on donor molecules. With the intention to present efficient donor materials, seven small donor molecules (T1-T7) were devised from DRTB-T molecule by using end-capped modeling. Newly designed molecules exhibited remarkable improved optoelectronic properties such as less band gap (from 2.00 to 2.23 eV) than DRTB-T having band gap of 2.57 eV. Similarly, a significant improvement in λmax values was noticed in designed molecules in gaseous medium (666 nm-738 nm) and solvent medium (691 nm-776 nm) than DRTB-T having λmax values at 568 nm and 588 nm in gas and solvent phase respectively. Among all molecules, T1 and T3 exhibited significant improvement in optoelectronic properties such as narrow band gap, lower excitation energy, higher λmax values and lower electron reorganization energy as compared to pre-existed DRTB-T molecule. The better functional ability of T1-T7 is also suggested by an improvement in open circuit voltage (Voc) of designed structures (1.62 eV-1.77 eV) as compared to R (1.49 eV) when PC61BM is used as an acceptor. So, all our newly derived donors can be employed in the active layer of organic solar cells to manufacture efficient OSCs.
Assuntos
Elétrons , Gases , SolventesRESUMO
In the present work, the drug-loading efficacy of graphyne (GYN) for doxorubicin (DOX) drug is investigated for the first time by using density functional theory (DFT). Doxorubicin drug is effective in the cure of numerous types of cancer including bone cancer, gastric, thyroid, bladder, ovarian, breast, and soft tissue cancer. Doxorubicin drug prevents the cell division process by intercalating in the double-helix of DNA and stopping its replication. The optimized, geometrical, energetic, and excited-state characteristics of graphyne (GYN), doxorubicin drug (DOX), and doxorubicin-graphyne complex (DOX@GYN complex) are calculated to see how effective it is as a carrier. The DOX drug interacted with GYN with an adsorption-energy of -1.57 eV (gas-phase). The interaction of GYN with DOX drug is investigated using NCI (non-covalent interaction) analysis. The findings of this analysis showed that the DOX@GYN complex has weak forces of interaction. Charge transfer from doxorubicin drug to GYN during DOX@GYN complex formation is described by charge-decomposition analysis and HOMO-LUMO analysis. The increased dipole-moment (8.41 D) of the DOX@GYN in contrast with therapeutic agent DOX and GYN indicated that the drug will move easily in the biochemical system. Furthermore, the photo-induced electron-transfer process is explored for excited states, and it reveals that upon interaction, fluorescence-quenching will occur in the complex DOX@GYN. In addition, the influence of the positive and negative charge states on the GYN and DOX@GYN is also considered. Overall, the findings indicated that the GYN could be exploited as an effective drug-transporter for the delivery of doxorubicin drug. Investigators will be inspired to look at another 2D nanomaterials for drug transport applications as a result of this theoretical work.
Assuntos
Nanoestruturas , Neoplasias , Humanos , Portadores de Fármacos/química , Doxorrubicina/farmacologia , Doxorrubicina/química , Sistemas de Liberação de Medicamentos , Neoplasias/tratamento farmacológico , Nanoestruturas/química , Linhagem Celular TumoralRESUMO
The competence of organic solar cells (OSCs) could be enhanced by improving the light absorption capabilities as well as the open-circuit voltage (Voc) of utilized molecules. To upgrade overall functionality of OSCs, seven new molecules were designed in this work using an end-cap alteration technique on Quinoxaline fused core-based non-fullerene acceptor (Qx-2) molecule. This technique is known to be quite advantageous in terms of improvement of the effectiveness and optoelectrical behavior of various OSCs. Critical parameters like the absorption maximum, frontier molecular orbitals, excitation energy, exciton binding energy, Voc, and fill factor of molecules were considered for the molecules thus designed. All newly designed molecules showed outstanding improvement in optoelectronic as well as performance-related properties. Out of all scrutinized molecules, Q1 exhibited highest wavelength of absorption peak (λmax = 779 nm) with the reduced band gap (1.90 eV), least excitation energy (Ex = 1.59 eV), along with the highest dipole moment (17.982950 D). Additionally, the newly designed compounds Q4, Q5, and Q6 exhibited significantly improved Vocs that were 1.55, 1.47, and 1.50 eV accordingly, as compared to the 1.37 eV of Qx-2 molecule. These molecules also showed remarkable improvement in fill factor attributed to direct correspondence of Voc with it. Inclusively, these results support the superiority of these newly developed molecules as prospective constituents of upgraded OSCs.
Assuntos
Quinoxalinas , Estudos ProspectivosRESUMO
In the current study, the drug loading ability of graphyne (GY) for the amiodarone (AMD) drug is investigated for the first time. The efficacy of GY as a carrier for amiodarone (a cardiovascular drug) is evaluated by calculating its electronic, energetic, optimized, and excited state properties with help of the density functional theory (DFT). The AMD drug interacted with the GY molecule with an adsorption energy of about -0.19 eV (gas-phase) and -1.92 eV (aqueous phase), suggesting that the AMD@GY complex is stable in water-phase. The HOMO (highest-occupied molecular-orbital) of the AMD@GY complex is concentrated on the AMD drug while the LUMO (lowest-unoccupied molecular-orbital) is centralized on GY with absolute charge separation, indicating charge transfer will occur between AMD and GY. The charge-transfer process is further studied with the aid of charge-decomposition analysis (CDA). The non-covalent interaction analysis (NCI) exposed that non-covalent forces exist between the GY carrier and AMD drug. These non-covalent forces between AMD drug and GY carrier play a significant role in drug unloading at the targeted or diseased site. Likewise, the calculations at excited-state, charge-state (+1 and -1) influence on GY and AMD@GY complex structures, and photo-induced electron transfer analysis (PET) are also studied for the graphyne-based drug-delivery system. According to PET and electron-hole analysis, fluorescence-quenching will occur upon interaction. Overall, it is concluded that graphyne can be exploited as a drug carrier for amiodarone drug delivery. Researchers will be fascinated to look at alternative 2D nanomaterials for drug delivery applications as a result of this theoretical work.
Assuntos
Amiodarona , Doenças Cardiovasculares , Nanoestruturas , Humanos , Portadores de Fármacos , Sistemas de Liberação de MedicamentosRESUMO
Modifying the central core is a very efficient strategy to boost the performance of non-fullerene acceptors. Herein five non-fullerene acceptors (M1-M5) of A-D-D'-D-A type were designed by substituting the central acceptor core of the reference (A-D-A'-D-A type) with different strongly conjugated and electron donating cores (D') to enhance the photovoltaic attributes of OSCs. All the newly designed molecules were analyzed through quantum mechanical simulations to compute their optoelectronic, geometrical, and photovoltaic parameters and compare them to the reference. Theoretical simulations of all the structures were carried out through different functionals with a carefully selected 6-31G(d,p) basis set. Absorption spectra, charge mobility, dynamics of excitons, distribution pattern of electron density, reorganization energies, transition density matrices, natural transition orbitals and frontier molecular orbitals, respectively of the studied molecules were evaluated at this functional. Among the designed structures in various functionals, M5 showed the most improved optoelectronic properties, such as the lowest band gap (2.18 e V), highest maximum absorption (720 nm), and lowest binding energy (0.46 eV) in chloroform solvent. Although the highest photovoltaic aptitude as acceptors at the interface was perceived to be of M1, its highest band gap and lowest absorption maxima lowered its candidature as the best molecule. Thus, M5 with its lowest electron reorganization energy, highest light harvesting efficiency, and promising open-circuit voltage (better than the reference), amongst other favorable features, outperformed the others. Conclusively, each evaluated property commends the aptness of designed structures to augment the power conversion efficiency (PCE) in the field of optoelectronics in one way or another, which reveals that a central un-fused core having an electron-donating capability with terminal groups being significantly electron withdrawing, is an effective configuration for the attainment of promising optoelectronic parameters, and thus the proposed molecules could be utilized in future NFAs.
RESUMO
To boost the photovoltaic attributes of organic photovoltaic cells, seven dithienyl diketopyrropopyrrole (TDPP) donor-based A-π-D-π-A (acceptor-bridge-donor-bridge-acceptor) type molecules (TM1-TM7) were formulated by modifying the electron accepting ends of the reference molecule (TMR). Optical and quantum chemical parameters of seven synthesized molecules were investigated using density functional theory with the MPW1PW91/6-31G(d,p) functional. Several parameters that can be used to measure and improve the efficiency of solar cells have been analyzed and summed up. These parameters include binding energy of exciton, excitation energy of electron, reorganization energies, dipole moment, molecular electrostatic potential, charge mobility, wavelength of maximum absorption, open circuit voltage, short circuit current, fill factor, density of states, transition density matrices, as well as iso-surface and non-covalent interactions. Thus, all of our proposed structures are perceived to be superior to the reference in terms of the maximum possible solar energy yield in solar cells with bulk heterojunctions, as determined by analyses of our designed molecules for the aforementioned parameters.
RESUMO
In this computational work, with the aim of boosting the ultimate efficiency of organic photovoltaic cells, seven small acceptors (IDST1-IDST7) were proposed by altering the terminal-acceptors of reference molecule IDSTR. The optoelectronic characteristics of the IDSTR and IDST1-IDST7 molecules were investigated using the MPW1PW91/6-31G(d,p) level of theory, and solvent-state computations were examined using time-dependent density functional theory (TD-DFT) simulation. Nearly all the investigated photovoltaic aspects of the newly proposed molecules were found to be better than those of the IDSTR molecule e.g. in comparison to IDSTR, IDST1-IDST7 exhibit a narrower bandgap (E gap), lower first excitation energy (E x), and a significant red-shift in the absorbance maxima (λ max). According to the findings, IDST3 has the lowest E x (1.61 eV), the greatest λ max (770 nm), and the shortest E gap (2.09 eV). IDST1-IDST7 molecules have higher electron mobility because their RE of electrons is less than that of IDSTR. Hole mobility of IDST2-IDST7 is higher than that of the reference owing to their lower RE for hole mobility than IDSTR. By coupling with the PTB7-Th donor, the open circuit voltage (V OC) of the investigated acceptor molecules (IDSTR and IDST1-IDST7) was calculated and investigation revealed that IDST4-IDST6 molecules showed higher V OC and fill factor (FF) values than IDSTR molecules. Accordingly, the modified molecules can be seriously evaluated for actual use in the fabrication of OSCs with enhanced photovoltaic and optoelectronic characteristics in light of the findings of this study.
RESUMO
In this research work, four new molecules from the π-A-π-D-π-A-π type reference molecule "DBS-2PP", were designed for their potential application in organic solar cells by adding peripheral A2 acceptors to the reference. Under density functional theory, a comprehensive theoretical investigation was conducted to examine the structural geometries, along with the optical and photovoltaic parameters; comprising frontier molecular orbitals, density of states, light-harvesting effectiveness, excitation, binding, and reorganizational energies, molar absorption coefficient, dipole moment, as well as transition density matrix of all the molecules under study. In addition, some photo-voltaic characteristics (open circuit photo-voltage and fill factor) were also studied for these molecules. Although all the developed compounds (D1-D4) surpassed the reference molecule in the attributes mentioned above, D4 proved to be the best. D4 possessed the narrowest band-gap, as well as the highest absorption maxima and dipole moment of all the molecules in both the evaluated phases. Moreover, with PC61BM as the acceptor, D4 showed the maximum V OC and FF values. Furthermore, while D3 had the greatest hole mobility owing to its lowest value of hole reorganization energy, D4 exhibited the maximum electron mobility due to its lowermost value of electron reorganization energy. Overall, all the chromophores proposed in this study showed outstanding structural, optical, and photovoltaic features. Considering this, organic solar cell fabrication can be improved by using these newly derived donors at the donor-acceptor interfaces.
RESUMO
To investigate the consequence of different substitution positions of various π-linkers on the photovoltaic properties of an organic solar cell molecule, we have introduced two series of six three-donor molecules, by the substitution of some effective π-linkers on the A-π-D-π-A type reference molecule IECIO-4F (taken as IOR). In series "a" the thienyl or furyl bridge is directly linked between the donor and acceptor moieties, while in series "b" the phenyl ring of the same bridge is working as the direct point of attachment. The frontier molecular orbitals, density of states, transition density matrix, molecular electrostatic potential surfaces, exciton binding energy, excitation energy, wavelength of maximum absorption, open-circuit voltage, fill factor, and some other photovoltaic attributes of the proposed molecules were analyzed through density functional theory (DFT) and its time-dependent (TD) approach; the TD-DFT method. Though both series of newly derived molecules were a step up from the reference molecule in almost all of the studied characteristics, the "a" series (IO1a to IO3a) seemed to be better due to their desirable properties such as the highest maximum absorption wavelength (λ max), open-circuit voltage, and fill factor, along with the lowest excitation and exciton dissociation energy, etc. of its molecules. Also, the studied morphology, optical characteristics, and electronic attributes of this series of proposed molecules signified the fact that the molecules with thienyl or furyl ring working as the direct link between the acceptor and donor molecules showed enhanced charge transfer abilities, and could provide a maximum quantum yield of the solar energy supplied.
RESUMO
In the current study, with the objective to improve the overall performance of organic solar cells, seven new W-shaped small molecular acceptors - were developed theoretically by the end-group alteration of the reference (WR) molecule. The MPW1PW91 functional with the basis set 6-31G(d,p) was used to explore the optoelectronic properties of the WR and W1-W7 molecules and the time-dependent self-consistent filed (TD-SCF) simulation was used to investigate the solvent-state calculations. The several explored photovoltaic attributes were the absorption spectra, excitation energies, bandgap between the FMOs, oscillator strength, full width at half maximum, light-harvesting efficiency, transition density matrices, open-circuit voltage, fill factor, density of states, binding energy, interaction coefficient, etc. Overall, the results revealed a bathochromic shift in the absorption maxima (λ max), a reduced HOMO-LUMO gap (E gap), and smaller excitation energy (E x) of the altered molecules as compared to the WR molecule. Some of the optoelectronic aspects of a well-known fused ring based acceptor named Y6 are also compared with the studied W-shaped molecules. Additionally, the W1 molecule presented the smallest E gap, along with highest λ max and the lowest E x, amongst all, in both the evaluated media (gas and solvent). The open circuit voltage (V OC) of all the considered small molecular acceptors was calculated by pairing them with the PTB7-Th donor. Here, W6 and W7 displayed the best results for the V OC (1.48 eV and 1.51 eV), normalized V OC (57.25 and 58.41) and FF (0.9131 and 0.9144). Consequently, in light of the results of this research, the altered molecules could be considered for practical implementation in the manufacturing of OSCs with improved photovoltaic capabilities.
RESUMO
With the aim of utilizing structural modeling techniques to design efficient organic solar cells, a quantum chemical density functional theory (DFT) and its time-dependent DFT (TD-DFT) study have been carried out for the examination of the photovoltaic properties of four BT-ClC-based novel non-fullerene acceptor (NFA) molecules. The designed entities (BT1-BT4) have an A-π-D-π-A configuration with seven fused ring-based BDT central core and newly substituted peripheral acceptor moieties. The optical parameters (absorption maxima, light-harvesting efficiency, first excitation energies, and dipole moments), electronic properties (frontier molecular orbitals, density of states, and molecular electrostatic potential), and charge transfer characteristics (open-circuit voltage, transition density matrix, and fill factor) of the investigated molecules were evaluated using the selected B3LYP/6-31G (d,p) level of theory. The systematic computational analysis reveals that under the influence of terminal acceptor groups, there is an augmentation in the absorption range, and reduction in the band gap values. The electron withdrawing effect of acceptor moieties is evident from the electronic density distribution on the HOMO-LUMO orbitals, along with the density of state (DOS) graphs. Transition density matrix (TDM) analyses reveal consistent charge transfer in the newly devised entities. Reorganization energies computed for electron and hole are significantly lower than the reference, making the transfer of charge carriers efficient. Open-circuit voltage (Voc) of reported acceptor entities, theoretically computed with PTB7-Th donor, revealed maximum output. Furthermore, the estimated fill factor (FF) of the investigated molecules predicted an increase in power conversion efficiencies. Consequently, all the computed parameters favor the applicability of our designed molecules in the field of organic photovoltaics by virtue of their excellent charge mobilities, increased absorption maximum values, and reduced band gaps.
Assuntos
Elétrons , Teoria da Densidade Funcional , Eletricidade EstáticaRESUMO
Density functional theory, along with its time dependent computational approach were employed in order to fine tune the photovoltaic attributes along with the efficiency of the MO-IDIC-2F molecule. Thus, five new molecules were designed by substitution of the different notable acceptor fragments in the MO-IDIC-2F molecule, along with the addition of the "[1, 2, 5] thiadiazolo[3,4-d] pyridazine" spacer moieties between donor core and newly substituted acceptor groups. In this research work, various photovoltaic properties, which could affect the efficiency of an organic chromophores, such as bandgap, oscillator strength, dipole moment, binding energy, light-harvesting efficiency, etc. were studied. All the newly proposed molecules demonstrated significantly improved outcomes in comparison to that of the reference molecule, in their absorption spectrum, excitation, as well as binding energy values, etc. In order to confirm the results of optoelectronic properties, density of states, transition density matrix, and electrostatic potential analyses of molecules were also performed, which supported our computational findings. All of the results confirmed the high potential of all the newly proposed molecules for the development of improved OSCs.
Assuntos
Fontes de Energia ElétricaRESUMO
Small-molecule (SM)-based organic solar cells (OSCs) have dominated the photovoltaic industry on account of their efficient optical and electronic properties. This quantum mechanical study addresses a DFT study of pentacyclic aromatic bislactam (PCL)-based small molecules for extremely proficient OSCs. Five novel small molecules (PCLM1-PCLM5) retaining the A-π-A-π-D-π-A-π-A arrangement were fabricated from the reference PCLR. At the MPW1PW91/6-31G** level of theory, detailed profiling of these novel molecules was performed by accurately following DFT, along with the time-dependent density functional theory (TD-DFT) hypothetical simulations to analyze the UV-visible absorption (λmax), light-harvesting efficiency (LHE), dipole moment (µ), fill factor (FF), open-circuit voltage (V OC), power conversion efficiency (PCE), frontier molecular orbitals (FMOs), binding energy (E b), density of states (DOS), electrostatic potential (ESP), and transition density matrix (TDM) plots. Alteration of peripheral acceptors in all of the molecular structures drastically modified their charge-transfer properties, such as a strong light-harvesting capability in the range of 0.9993-0.9998, reduced exciton E b (from 0.34 to 0.39 eV), a reduced bandgap (E g) in the range of 1.66-1.99 eV, an elevated λmax (775-959 nm) along with a higher µ in the solvent phase (1.934-7.865 D) when studied in comparison with PCLR, possessing an LHE of 0.9986, an E b of 0.40, an E g 2.27 eV, λmax at 662 nm, and a µ of 0.628 D. The FMO analysis revealed the uniform dispersal of charge density entirely along the highest occupied (HOMO) and lowest unoccupied (LUMO) molecular orbitals in newly constructed moieties. Electron as well as hole mobility rates, V OC, FF, and PCE of all novel molecules (PCLM1-PCLM5) were higher as compared with those of PCLR, ultimately making them exceptional candidates for solar devices. Focusing on the outcomes, terminal acceptor modification was found to be a suitable method for the development of highly tuned OSCs in the future.
RESUMO
The first-principles approach has been used while employing the Perdew-Burke-Ernzerhof exchange-correlation functional of generalized gradient approximation (PBE-GGA) along with the Hubbard parameter to study the structural, optoelectronic, mechanical and magnetic properties of titanium-based MAX materials Ti3AC2 (A = P, As, Cd) for the first time. As there is no band gap found between the valence and conduction bands in the considered materials, these compounds belong to the conductor family of materials. A mechanical analysis carried out at pressures of 0 GPa to 20 GPa and the calculated elastic constants C ij reveal the stability of these materials. Elastic parameters, i.e., Young's, shear and bulk moduli, anisotropy factor and Poisson's ratio, have been investigated in the framework of the Voigt-Reuss-Hill approximation. The calculated values of relative stiffness are found to be greater than ½ for Ti3PC2 and Ti3AsC2, which indicates that these compounds are closer to typical ceramics, which possess low damage tolerance and fracture toughness. Optical parameters, i.e., dielectric complex function, refractive index, extinction coefficient, absorption coefficient, loss function, conductivity and reflectivity, have also been investigated. These dynamically stable antiferromagnetic materials might have potential applications in advanced electronic and magnetic devices. Their high strength and significant hardness make these materials potential candidates as hard coatings.
RESUMO
In our continuous screening for bioactive microbial natural products, the culture extracts of a terrestrial Actinomycetes sp. GSCW-51 yielded two new metabolites, i. e., 5-hydroxymethyl-3-(1-hydroxy-6-methyl-7-oxooctyl)dihydrofuran-2(3H)-one (1), 5-hydroxymethyl-3-(1,7-dihydroxy-6-methyloctyl)dihydrofuran-2(3H)-one (2), and two known compounds; 5'-methylthioinosine (3), and 5'-methylthioinosine sulfoxide (4), which are isolated first time from any natural source, along with four known compounds (5-8). The structures of the new compounds were deduced by HR-ESI-MS, 1D and 2D NMR data, and in comparison with related compounds from the literature. Additionally, owing to the current COVID-19 pandemic situation, we also computationally explored the therapeutic potential of our isolated compounds against SARS-CoV-2. Compound 4 showed the best binding energies of -6.2 and -6.6â kcal/mol for Mpro and spike proteins, respectively. The intermolecular interactions were also studied using 2-D and 3-D imagery, which also supported the binding energies as well as put several insights under the spotlight. Furthermore, Lipinski's rule of 5 was used to predict the drug likeness of compounds 1-4, which indicated all compounds obey Lipinski's rule of 5. The study of bioavailability radars of the compounds 1-4 also confirmed their drug likeness properties where all the five crucial drug likeness parameters are in color area, which is safe to be used as drugs. Our isolation and computational findings highly encourage the scientific community to do further inâ vitro and inâ vivo studies of compounds 1-4.
Assuntos
Tratamento Farmacológico da COVID-19 , SARS-CoV-2 , Actinomyces , Humanos , Simulação de Acoplamento Molecular , Simulação de Dinâmica Molecular , Pandemias , TioinosinaRESUMO
OBJECTIVE: The current objective was to synthesize biologically active Isatin derivatives. For this purpose, six (06) chemical entities of Isatin derivatives such as 3a-3c and 4a-4c were synthesized from Isatin substrate. METHODS: The pure compounds were characterized with the help of 1H-NMR, FT-IR, EIMS spectroscopic techniques. The synthesized amines 3a-3c and hydrazones 4a-4c were evaluated for their toxicity potential with the help of brine shrimp bioassay. RESULTS: The obtained results revealed that 3c exhibited promising toxicity (LD50 = 1.03 × 10-5 M) against Artemia salina. The pure chemical entities such as compounds 3a-3c and 4a-4c were evaluated against four Gram-negative (E. coli, P. aeruginosa, S. typhi, S. flexneri) and two Gram-positive (B. subtilis, S. aureus) bacteriae. The compound 3a displayed significant activity against two bacterial strains; i.e. P. aeruginosa, S. typhi, compound 3c demonstrated significant activity against P. aeruginosa. Compound 4b was the most active against S. typhi, displaying a greater diameter of the growth of inhibition zone (GIZ) than the standard drug. Compound 4c exhibited significant activity against P. aeruginosa and S. typhi. Compounds 3a-3c and 4a-4c exhibited moderate to significant antibacterial activity against three out of five strains. Only Compound 3c revealed promising toxicity (LD50 = 1.03 × 10-5 M) against Artemia salina. Antifungal studies of the compounds 3a-3c and 4a-4c against six fungal cultures; T. longifusus, C. albicans, A. flavus, M. canis, F. solani, and C. glabrata. All the compounds were active against one or more pathogens having inhibition (10- 90 %). Compound 3a exhibited significant inhibition i.e. 90 % against M. canis, 70 % against T. longifusus, compound 4b further displayed significant inhibition (90 %) against A. flavus and thus proved to be the most active member of the series. CONCLUSION: All compounds showed better antibacterial, antifungal and cytotoxic activities, which may provide a ground to prepare enhanced molecules with much higher antibacterial activities.
Assuntos
Antifúngicos , Isatina , Animais , Antibacterianos , Artemia , Escherichia coli , Isatina/química , Isatina/farmacologia , Espectroscopia de Infravermelho com Transformada de Fourier , Staphylococcus aureus , SulfonamidasRESUMO
We describe for the first time the use of a single source precursor to deposit thin films and nanocrystals of palladium selenide.