Protonation of a peroxodiiron(III) complex and conversion to a diiron(III/IV) intermediate: implications for proton-assisted O-O bond cleavage in nonheme diiron enzymes.

Oxygenation of a diiron(II) complex, [Fe(II)(2)(µ-OH)(2)(BnBQA)(2)(NCMe)(2)](2+) [2, where BnBQA is N-benzyl-N,N-bis(2-quinolinylmethyl)amine], results in the formation of a metastable peroxodiferric intermediate, 3. The treatment of 3 with strong acid affords its conjugate acid, 4, in which the (µ-oxo)(µ-1,2-peroxo)diiron(III) core of 3 is protonated at the oxo bridge. The core structures of 3 and 4 are characterized in detail by UV-vis, Mössbauer, resonance Raman, and X-ray absorption spectroscopies. Complex 4 is shorter-lived than 3 and decays to generate in ~20% yield of a diiron(III/IV) species 5, which can be identified by electron paramagnetic resonance and Mössbauer spectroscopies. This reaction sequence demonstrates for the first time that protonation of the oxo bridge of a (µ-oxo)(µ-1,2-peroxo)diiron(III) complex leads to cleavage of the peroxo O-O bond and formation of a high-valent diiron complex, thereby mimicking the steps involved in the formation of intermediate X in the activation cycle of ribonucleotide reductase.

Synthesis and characterization of three-coordinate Ni(III)-imide complexes.

A new family of low-coordinate nickel imides supported by 1,2-bis(di-tert-butylphosphino)ethane was synthesized. Oxidation of nickel(II) complexes led to the formation of both aryl- and alkyl-substituted nickel(III)-imides, and examples of both types have been isolated and fully characterized. The aryl substituent that proved most useful in stabilizing the Ni(III)-imide moiety was the bulky 2,6-dimesitylphenyl. The two Ni(III)-imide compounds showed different variable-temperature magnetic properties but analogous EPR spectra at low temperatures. To account for this discrepancy, a low-spin/high-spin equilibrium was proposed to take place for the alkyl-substituted Ni(III)-imide complex. This proposal was supported by DFT calculations. DFT calculations also indicated that the unpaired electron is mostly localized on the imide nitrogen for the Ni(III) complexes. The results of reactions carried out in the presence of hydrogen donors supported the findings from DFT calculations that the adamantyl substituent was a significantly more reactive hydrogen-atom abstractor. Interestingly, the steric properties of the 2,6-dimesitylphenyl substituent are important not only in protecting the Ni═N core but also in favoring one rotamer of the resulting Ni(III)-imide, by locking the phenyl ring in a perpendicular orientation with respect to the NiPP plane.

Facile Routes to Manganese(II) Triflate Complexes.

Manganese(II) chloride reacts with trimethylsilyl triflate (TMS(OTf) where OTf = (-)OSO(2)CF(3)) in a 1:1 mixture of acetonitrile and tetrahydrofuran, and after recrystallization affords the linear coordination polymer [Mn(II)(CH(3)CN)(2)(OTf)(2)](n). Each distorted octahedral manganese(II) center in the polymeric chain has trans-acetonitriles and the remaining equatorial coordination positions are occupied by the bridging triflate anions. Dissolving [Mn(II)(CH(3)CN)(2)(OTf)(2)](n) in equal volumes of acetonitrile and pyridine followed by recrystallization with diethyl ether yields trans-[Mn(II)(C(5)H(5)N)(4)(OTf)(2)]. The distorted octahedral geometry of the manganese center features monodentate trans-triflate anions and four equatorial pyridines. Exposure of either [Mn(II)(CH(3)CN)(2)(OTf)(2)](n) or [Mn(II)(C(5)H(5)N)(4)(OTf)(2)] to water readily gives [Mn(II)(H(2)O)(6)](OTf)(2). XRD reveals hydrogen-bonding interactions between the [Mn(II)(H(2)O)(6)](2+) cation and the triflate anion. All three of these species are easily crystallized and provide convenient sources of manganese(II) for further synthetic elaboration.

Synthesis and characterization of sterically encumbered ß-ketoiminate complexes of iron(II) and zinc(II).

The synthesis, structure, and spectroscopic signatures of a series of four-coordinate iron(II) complexes of ß-ketoiminates and their zinc(II) analogues are presented. An unusual five-coordinate iron(II) triflate with three oxygen bound protonated ß-ketoimines is also synthesized and structurally characterized. Single-crystal X-ray crystallographic analysis reveals that the deprotonated bis(chelate)metal complexes are four-coordinate with various degrees of distortion depending on the degree of steric bulk and the electronics of the metal center. Each of the high-spin iron(II) centers exhibits multiple electronic transitions including ligand π to π*, metal-to-ligand charge transfer, and spin-forbidden d-d bands. The (1)H NMR spectra of the paramagnetic high-spin iron(II) centers are assigned on the basis of chemical shifts, longitudinal relaxation times (T(1)), relative integrations, and substitution of the ligands. The electrochemical studies support variations in the ligand strength. Parallel mode EPR measurements for the isopropyl substituted ligand complex of iron(II) show low-field resonances (g > 9.5) indicative of complex aggregation or crystallite formation. No suitable solvent system or glassing mixture was found to remedy this phenomenon. However, the bulkier diisopropylphenyl substituted ligand exhibits an integer spin signal consistent with an isolated iron(ii) center [S = 2; D = -7.1 ± 0.8 cm(-1); E/D = 0.1]. A tentative molecular orbital diagram is assembled.

Synthesis and characterization of iron(II) quinaldate complexes.

Treatment of iron(II) chloride or iron(II) bromide with 2 equiv of sodium quinaldate (qn = quinaldate or C(10)H(6)NO(2)(-)) yields the coordinatively unsaturated mononuclear iron(II) quinaldate complexes Na[Fe(II)(qn)(2)Cl].DMF and Na[Fe(II)(qn)(2)Br].DMF (DMF = N,N-dimethylformamide), respectively. When a similar synthesis is carried out using iron(II) triflate, a solvent-derived linear triiron(II) complex, [Fe(II)(3)(qn)(6)(DMF)(2)], with two five-coordinate iron(II) centers and a single six-coordinate iron(II) center is obtained. Each of these species has been characterized using X-ray diffraction. The vibrational features of these complexes are consistent with the observed solid-state structures. Each of these compounds exhibits an iron(II)-to-quinaldate (pi*) charge-transfer band between 520 and 550 nm. These metal-to-ligand charge-transfer bands are sensitive to substitution of the quinaldates as well as alteration of the first coordination sphere ligands. However, the (1)H NMR spectra of these paramagnetic high-spin iron(II) complexes are not consistent with retention of the solid-state structures in a DMF solution. The chemical shifts, longitudinal relaxation times (T(1)), relative integrations, and substitution of the quinaldate ligands provide a means to fully assign the (1)H NMR spectra of the paramagnetic materials. These spectra are consistent with coordination equilibria between five- and six-coordinate species in a DMF solution. Electrochemical studies are reported to place these oxygen-sensitive compounds in a broader context with other iron(II) compounds. Iron complexes of bidentate quinoline-2-carboxylate-derived ligands are germane to metabolic pathways, environmental remediation, and catalytic applications.

Spectroscopic and computational studies of (mu-oxo)(mu-1,2-peroxo)diiron(III) complexes of relevance to nonheme diiron oxygenase intermediates.

With the goal of gaining insight into the structures of peroxo intermediates observed for oxygen-activating nonheme diiron enzymes, a series of metastable synthetic diiron(III)-peroxo complexes with [Fe(III)(2)(mu-O)(mu-1,2-O(2))] cores has been characterized by X-ray absorption and resonance Raman spectroscopies, EXAFS analysis shows that this basic core structure gives rise to an Fe-Fe distance of approximately 3.15 A; the distance is decreased by 0.1 A upon introduction of an additional carboxylate bridge. In corresponding resonance Raman studies, vibrations arising from both the Fe-O-Fe and the Fe-O-O-Fe units can be observed. Importantly a linear correlation can be discerned between the nu(O-O) frequency of a complex and its Fe-Fe distance among the subset of complexes with [Fe(III)(2)(mu-OR)(mu-1,2-O(2))] cores (R = H, alkyl, aryl, or no substituent). These experimental studies are complemented by a normal coordinate analysis and DFT calculations.

On the feasibility of N2 fixation via a single-site FeI/FeIV cycle: Spectroscopic studies of FeI(N2)FeI, FeIV[triple bond]N, and related species.

The electronic properties of an unusually redox-rich iron system, [PhBP(R)3]Fe-Nx (where [PhBP(R)3] is [PhB(CH2PR2)3]-), are explored by Mössbauer, EPR, magnetization, and density-functional methods to gain a detailed picture regarding their oxidation states and electronic structures. The complexes of primary interest in this article are the two terminal iron(IV) nitride species, [PhBP(iPr)3]Fe[triple bond]N (3a) and [PhBP(CH2Cy)3]Fe[triple bond]N (3b), and the formally diiron(I) bridged-Fe(mu-N2)Fe species, {[PhBP(iPr)3]Fe}2(mu-N2) (4). Complex 4 is chemically related to 3a via a spontaneous nitride coupling reaction. The diamagnetic iron(IV) nitrides 3a and 3b exhibit unique electronic environments that are reflected in their unusual Mössbauer parameters, including quadrupole-splitting values of 6.01(1) mm/s and isomer shift values of -0.34(1) mm/s. The data for 4 suggest that this complex can be described by a weak ferromagnetic interaction (J/D < 1) between two iron(I) centers. For comparison, four other relevant complexes also are characterized: a diamagnetic iron(IV) trihydride [PhBP(iPr)3]Fe(H)3(PMe3) (5), an S = 3/2 iron(I) phosphine adduct [PhBP(iPr)3]FePMe3 (6), and the S = 2 iron(II) precursors to 3a, [PhBP(iPr)3]Fe-Cl and [PhBP(iPr)3]Fe-2,3:5,6-dibenzo-7-aza bicyclo[2.2.1]hepta-2,5-diene (dbabh). The electronic properties of these respective complexes also have been explored by density-functional methods to help corroborate our spectral assignments and to probe their electronic structures further.

Vibrational spectroscopy and analysis of pseudo-tetrahedral complexes with metal imido bonds.

A number of assignments have been previously posited for the metal-nitrogen stretch (nu(M-NR)), the N-R stretch (nu(MN-R)), and possible ligand deformation modes associated with terminally bound imides. Here we examine mononuclear iron(III) and cobalt(III) imido complexes of the monoanionic tridentate ligand [PhBP3] ([PhBP3] = [PhB(CH2PPh2)3]-) to clarify the vibrational features for these trivalent metal imides. We report the structures of [PhBP3]FeNtBu and [PhBP3]CoNtBu. Pseudo-tetrahedral metal imides of these types exhibit short bond lengths (ca. 1.65 A) and nearly linear angles about the M-N-C linkages, indicative of multiple bond character. Furthermore, these compounds give rise to intense, low-energy visible absorptions. Both the position and the intensity of the optical bands in the [PhBP3]MNR complexes depend on whether the substituent is an alkyl or aryl group. Excitation into the low-energy bands of [PhBP3]FeNtBu gives rise to two Raman features at 1104 and 1233 cm(-1), both of which are sensitive to 15N and 2H labeling. The isotope labeling suggests the 1104 cm(-1) mode has the greatest Fe-N stretching character, while the 1233 cm(-1) mode is affected to a lesser extent by (15)N substitution. The spectra of the deuterium-labeled imides further support this assertion. The data demonstrate that the observed peaks are not simple diatomic stretching modes but are extensively coupled to the vibrations of the ancillary organic group. Therefore, describing these complexes as simple diatomic or even triatomic oscillators is an oversimplification. Analogous studies of the corresponding cobalt(III) complex lead to a similar set of isotopically sensitive resonances at 1103 and 1238 cm(-1), corroborating the assignments made in the iron imides. Very minimal changes in the vibrational frequencies are observed upon replacement of cobalt(III) for iron(III), suggesting similar force constants for the two compounds. This is consistent with the previously proposed electronic structure model in which the added electron resides in a relatively nonbonding orbital. Replacement of the tBu group with a phenyl ring leads to a significantly more complicated resonance Raman spectrum, presumably due to coupling with the vibrations of the phenyl ring. Polarization studies demonstrate that the observed modes have A(1) symmetry. In this case, a clearer resonance enhancement of the signals is observed, supporting a charge transfer designation for the electronic transitions. A series of isotope-labeling experiments has been carried out, and the modes with the greatest metal-nitrogen stretching character have been assigned to peaks at approximately 960 and approximately 1300 cm(-1) in both the iron and cobalt [PhBP3]MNPh complexes. These results are consistent with a multiple M-N bond for these metal imides.

Mid- to high-valent imido and nitrido complexes of iron.

This short review summarizes recent advances in the synthesis and reactivity of iron imides and nitrides. Both monometallic and multimetallic assemblies featuring these moieties are discussed. Recent synthetic approaches have led to the availability of new mid- to high-valent iron imides and nitrides, allowing us to begin assembling models to describe the factors influencing their relative stabilities and reactivity patterns.

High-spin and low-spin iron(II) complexes with facially-coordinated borohydride ligands.

Rare examples of monometallic high-spin and low-spin L3Fe(H3BH) complexes have been characterized, where the two L3 ligands are [TpPh2] and [PhBP3] ([TpPh2] = [HB(3,5-Ph2pz)3]- and [PhBP3] = [PhB(CH2PPh2)3]-). The structures are reported wherein the borohydride ligand is facially coordinated to the iron center in each complex. Density functional methods have been employed to explain the bonding in these unusual iron(II) centers. Despite the differences in spin states, short Fe-B distances are observed in both complexes and there is significant theoretical evidence to support a substantial bonding interaction between the iron and boron nuclei. In light of this interaction, we suggest that these complexes can be described as (L3)Fe(eta4-H3BH) complexes.

Heterolytic H2 activation mediated by low-coordinate L3Fe-(mu-N)-FeL3 complexes to generate Fe(mu-NH)(mu-H)Fe species.

The diiron mu-nitride complexes, {L3FeII(mu-N)FeIIL3}- and L3FeIII(mu-N)FeIIL3, heterolytically activate hydrogen (1 atm) at ambient temperature in solution (L3 = [PhB(CH2PPh2)3]-). These transformations lead to structurally unique {L3FeII(mu-NH)(mu-H)FeIIL3}- and L3FeIII(mu-NH)(mu-H)FeIIL3 products. X-ray data establish a marked reduction in the Fe-Fe distance upon H2 uptake, and spectroscopic data establish both FeIIFeII species to be diamagnetic, whereas the FeIIIFeII species, L3FeIII(mu-N)FeIIL3 and L3FeIII(mu-NH)(mu-H)FeIIL3, populate doublet ground states with thermally accessible higher spin states.

Oxygenase activity in the self-hydroxylation of (s)-2-hydroxypropylphosphonic acid epoxidase involved in fosfomycin biosynthesis.

The last step of the biosynthesis of fosfomycin is the conversion of (S)-2-hydroxypropylphosphonic acid (HPP) to fosfomycin by HPP epoxidase (HppE), which is a mononuclear non-heme iron-dependent enzyme. The apo-HppE from Streptomyces wedmorensis is colorless, but turns green with broad absorption bands at 430 and 680 nm after reconstitution with ferrous ion under aerobic conditions. Resonance Raman studies showed that this green chromophore arises from a bidentate iron(III)-catecholate (DOPA) complex, and the most likely site of modification is at Tyr105 on the basis of site-specific mutagenesis results. It was also found that reconstitution in the presence of ascorbate leads to the formation of additional DOPA that shows (18)O-incorporation from (18)O(2). Thus, HppE can act as an oxygenase via a putative high valent iron-oxo or an iron-hydroperoxo intermediate, just like other members of the family of non-heme iron enzymes. The oxygen activation mechanism for catalytic turnover is proposed to parallel that for self-hydroxylation.

Oxygen activation by nonheme iron(II) complexes: alpha-keto carboxylate versus carboxylate.

Mononuclear iron(II) alpha-keto carboxylate and carboxylate compounds of the sterically hindered tridentate face-capping ligand Tp(Ph2) (Tp(Ph2) = hydrotris(3,5-diphenylpyrazol-1-yl)borate) were prepared as models for the active sites of nonheme iron oxygenases. The structures of an aliphatic alpha-keto carboxylate complex, [Fe(II)(Tp(Ph2))(O(2)CC(O)CH(3))], and the carboxylate complexes [Fe(II)(Tp(Ph2))(OBz)] and [Fe(II)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] were determined by single-crystal X-ray diffraction, all of which have five-coordinate iron centers. Both the alpha-keto carboxylate and the carboxylate compounds react with dioxygen resulting in the hydroxylation of a single ortho phenyl position of the Tp(Ph2) ligand. The oxygenation products were characterized spectroscopically, and the structure of the octahedral iron(III) phenolate product [Fe(III)(Tp(Ph2))(OAc)(3,5-Ph(2)pzH)] was established by X-ray diffraction. The reaction of the alpha-keto carboxylate model compounds with oxygen to produce the phenolate product occurs with concomitant oxidative decarboxylation of the alpha-keto acid. Isotope labeling studies show that (18)O(2) ends up in the Tp(Ph2) phenolate oxygen and the carboxylate derived from the alpha-keto acid. The isotope incorporation mirrors the dioxygenase nature of the enzymatic systems. Parallel studies on the carboxylate complexes demonstrate that the oxygen in the hydroxylated ligand is also derived from molecular oxygen. The oxygenation of the benzoylformate complex is demonstrated to be first order in metal complex and dioxygen, with activation parameters DeltaH++ = 25 +/- 2 kJ mol(-1) and DeltaS++ = -179 +/- 6 J mol(-1) K(-1). The rate of appearance of the iron(III) phenolate product is sensitive to the nature of the substituent on the benzoylformate ligand, exhibiting a Hammett rho value of +1.3 indicative of a nucleophilic mechanism. The proposed reaction mechanism involves dioxygen binding to produce an iron(III) superoxide species, nucleophilic attack of the superoxide at the alpha-keto functionality, and oxidative decarboxylation of the adduct to afford the oxidizing species that attacks the Tp(Ph2) phenyl ring. Interestingly, the alpha-keto carboxylate complexes react 2 orders of magnitude faster than the carboxylate complexes, thus emphasizing the key role that the alpha-keto functionality plays in oxygen activation by alpha-keto acid-dependent iron enzymes.

Biomimetic aryl hydroxylation derived from alkyl hydroperoxide at a nonheme iron center. Evidence for an Fe(IV)=O oxidant.

Many nonheme iron-dependent enzymes activate dioxygen to catalyze hydroxylations of arene substrates. Key features of this chemistry have been developed from complexes of a family of tetradentate tripodal ligands obtained by modification of tris(2-pyridylmethyl)amine (TPA) with single alpha-arene substituents. These included the following: -C(6)H(5) (i.e., 6-PhTPA), L(1); -o-C(6)H(4)D, o-d(1)-L(1); -C(6)D(5), d(5)-L(1); -m-C(6)H(4)NO(2), L(2); -m-C(6)H(4)CF(3), L(3); -m-C(6)H(4)Cl, L(4); -m-C(6)H(4)CH(3), L(5); -m-C(6)H(4)OCH(3), L(6); -p-C(6)H(4)OCH(3), L(7). Additionally, the corresponding ligand with one alpha-phenyl and two alpha-methyl substituents (6,6-Me(2)-6-PhTPA, L(8)) was also synthesized. Complexes of the formulas [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(n)())Fe(II)(OTf)(2)] (n = 1-7, OTf = (-)O(3)SCF(3)), and [(L(8))Fe(II)(OTf)(2)](2) were obtained and characterized by (1)H NMR and UV-visible spectroscopies and by X-ray diffraction in the cases of [(L(1))Fe(II)(NCCH(3))(2)](ClO(4))(2), [(L(6))Fe(II)(OTf)(2)], and [(L(8))Fe(II)(OTf)(2)](2). The complexes react with tert-butyl hydroperoxide ((t)()BuOOH) in CH(3)CN solutions to give iron(III) complexes of ortho-hydroxylated ligands. The product complex derived from L(1) was identified as the solvated monomeric complex [(L(1)O(-))Fe(III)](2+) in equilibrium with its oxo-bridged dimer [(L(1)O(-))(2)Fe(III)(2)(mu(2)-O)](2+), which was characterized by X-ray crystallography as the BPh(4)(-) salt. The L(8) product was also an oxo-bridged dimer, [(L(8)O(-))(2)Fe(III)(2)(mu(2)-O)](2+). Transient intermediates were observed at low temperature by UV-visible spectroscopy, and these were characterized as iron(III) alkylperoxo complexes by resonance Raman and EPR spectroscopies for L(1) and L(8). [(L(1))Fe(II)(OTf)(2)] gave rise to a mixture of high-spin (S = 5/2) and low-spin (S = 1/2) Fe(III)-OOR isomers in acetonitrile, whereas both [(L(1))Fe(OTf)(2)] in CH(2)Cl(2) and [(L(8))Fe(OTf)(2)](2) in acetonitrile afforded only high-spin intermediates. The L(1) and L(8) intermediates both decomposed to form respective phenolate complexes, but their reaction times differed by 3 orders of magnitude. In the case of L(1), (18)O isotope labeling indicated that the phenolate oxygen is derived from the terminal peroxide oxygen via a species that can undergo partial exchange with exogenous water. The iron(III) alkylperoxo intermediate is proposed to undergo homolytic O-O bond cleavage to yield an oxoiron(IV) species as an unobserved reactive intermediate in the hydroxylation of the pendant alpha-aryl substituents. The putative homolytic chemistry was confirmed by using 2-methyl-1-phenyl-2-propyl hydroperoxide (MPPH) as a probe, and the products obtained in the presence and in the absence of air were consistent with formation of alkoxy radical (RO(*)). Moreover, when one ortho position was labeled with deuterium, no selectivity was observed between hydroxylation of the deuterated and normal isotopomeric ortho sites, but a significant 1,2-deuterium shift ("NIH shift") occurred. These results provide strong mechanistic evidence for a metal-centered electrophilic oxidant, presumably an oxoiron(IV) complex, in these arene hydroxylations and support participation of such a species in the mechanisms of the nonheme iron- and pterin-dependent aryl amino acid hydroxylases.