Reductive Doping Inhibits the Formation of Isomerization-Derived Structural Defects in N-doped Poly(benzodifurandione) (n-PBDF).

Recently, solution-processable n-doped poly(benzodifurandione) (n-PBDF) has been made through in-situ oxidative polymerization and reductive doping, which exhibited exceptionally high electrical conductivities and optical transparency. The discovery of n-PBDF is considered a breakthrough in the field of organic semiconductors. In the initial report, the possibility of structural defect formation in n-PBDF was proposed, based on the observation of structural isomerization from (E)-2H,2'H-[3,3'-bibenzofuranylidene]-2,2'-dione (isoxindigo) to chromeno[4,3-c]chromene-5,11-dione (dibenzonaphthyrone) in the dimer model reactions. In this study, we present clear evidence that structural isomerization is inhibited during polymerization. We reveal that the dimer (BFD1) and the trimer (BFD2) can be reductively doped by several mechanisms, including hydride transfer, forming charge transfer complexes (CTC) or undergoing an integer charge transfer (ICT) with reactants available during polymerization. Once the hydride transfer adducts, the CTC, or the ICT product forms, structural isomerization can be effectively prevented even at elevated temperatures. Our findings provide a mechanistic understanding of why isomerization-derived structural defects are absent in n-PBDF backbone. It lays a solid foundation for the future development of n-PBDF as a benchmark polymer for organic electronics and beyond.

Chiroptical Switching of Electrochromic Polymer Thin Films.

The interaction between light and chiroptical polymers plays a crucial role in chiroptics, spintronics, and chiral-spin selectivity. Despite considerable successes in creating dissymmetric polymer films, the elucidation of chiroptical activities under electrochemical switching remains unexplored. Here homogeneous chiral electrochromics is reported using chiral assembly of conjugated polymers through a transient solidification process with molecular chiral templates. In their neutral state, the chiral electrochromic polymers directly produce a remarkably dissymmetric polarization-dependent transmittance. The circular dichroism (CD) and dissymmetric transmission can be tuned by adjusting the doping level of the electrochemically active polymer films. Under high levels of oxidation, the chiroptical activities are reversed with strong bleaching in the visible, leading to formation of monosignate CD spectra over the infrared region. The matching between circular polarization handedness and chirality of chiroptical polymers makes a distinct impact on optical contrast and color switching dynamics due to the flipped chiroptical activities through polymer redox reactions. The differential circularly polarized transmission in the chiral see-through display can make a well-resolved color change in human eyes, demonstrating proof-of-concept devices for 3D imaging and information encryption. This work serves as a foundation to develop advanced on-chip fabrication of circular polarization-multiplexed display in flexible and highly integrated platforms.

Efficient and Modular Biofunctionalization of Thiophene-Based Conjugated Polymers through Embedded Latent Disulfide.

Biofunctionalized conjugated polymers (i.e., carrying enzymes, antibodies, and nucleic acids) are of great interest for many biological applications, yet efficient biofunctionalization of conjugated polymers under biocompatible conditions is challenging. We report a facile strategy to make biofunctionalized conjugated polymers through thiol-ene chemistry with embedded latent disulfide functional groups. This is made possible through the design of a cyclic disulfide-containing dioxythiophene, which can be integrated into a series of conjugated polymers via acid-catalyzed chain-growth polymerization. The utility of such a biofunctionalized polymer with glucose oxidase has been examined in organic electrochemical transistors for the selective sensing of glucose. This work provides a venue for the creation of biofunctional organic semiconductors.

Subtle Molecular Changes Largely Modulate Chiral Helical Assemblies of Achiral Conjugated Polymers by Tuning Solution-State Aggregation.

Understanding the solution-state aggregate structure and the consequent hierarchical assembly of conjugated polymers is crucial for controlling multiscale morphologies during solid thin-film deposition and the resultant electronic properties. However, it remains challenging to comprehend detailed solution aggregate structures of conjugated polymers, let alone their chiral assembly due to the complex aggregation behavior. Herein, we present solution-state aggregate structures and their impact on hierarchical chiral helical assembly using an achiral diketopyrrolopyrrole-quaterthiophene (DPP-T4) copolymer and its two close structural analogues wherein the bithiophene is functionalized with methyl groups (DPP-T2M2) or fluorine atoms (DPP-T2F2). Combining in-depth small-angle X-ray scattering analysis with various microscopic solution imaging techniques, we find distinct aggregate in each DPP solution: (i) semicrystalline 1D fiber aggregates of DPP-T2F2 with a strongly bound internal structure, (ii) semicrystalline 1D fiber aggregates of DPP-T2M2 with a weakly bound internal structure, and (iii) highly crystalline 2D sheet aggregates of DPP-T4. These nanoscopic aggregates develop into lyotropic chiral helical liquid crystal (LC) mesophases at high solution concentrations. Intriguingly, the dimensionality of solution aggregates largely modulates hierarchical chiral helical pitches across nanoscopic to micrometer scales, with the more rigid 2D sheet aggregate of DPP-T4 creating much larger pitch length than the more flexible 1D fiber aggregates. Combining relatively small helical pitch with long-range order, the striped twist-bent mesophase of DPP-T2F2 composed of highly ordered, more rigid 1D fiber aggregate exhibits an anisotropic dissymmetry factor (g-factor) as high as 0.09. This study can be a prominent addition to our knowledge on a solution-state hierarchical assembly of conjugated polymers and, in particular, chiral helical assembly of achiral organic semiconductors that can catalyze an emerging field of chiral (opto)electronics.

Synthesis and Reduction of Nitrogen-Substituted Diaryl Dihydrophenazine Diradical Dications.

A one-pot synthetic approach to form core-extended N,N'-disubstituted diaryl dihydrophenazine (DADHP) diradical dications (DRDCs) via chemical oxidation from aryl-substituted ortho-phenyldiamines is reported. The isolated N,N'-disubstituted DADHP DRDCs were reduced to their neutral counterparts with hydrazine. The model system featuring an unsubstituted fluorene aryl group, 2a, was tested as a photocatalyst for the polymerization of methyl methacrylate using organocatalyzed atom transfer polymerization (O-ATRP), which yielded a polymer with a controlled molecular weight and narrow polydispersity.

One-Step Solution Patterning for Two-Dimensional Perovskite Nanoplate Arrays.

Two-dimensional perovskite crystals have attracted significant attention for their diverse optoelectronic characteristics, owing to their superior semiconducting properties. However, the majority of studies to date have focused on single crystals, which pose challenges for integration into device arrays due to their incompatibility with selective growth or conventional lithography techniques. Here, a facile one-step solution process for synthesizing 2D perovskite crystal arrays is proposed through meniscus-guided coating on patterned substrates. We further utilized this method for the synthesis of lateral heterostructure nanoplate arrays. Six different 2D perovskite nanoplate arrays, including epitaxial heterostructures, are successfully realized. Optical and crystallographic characterizations show the high optical performance and crystallinity of the nanoplates. Moreover, this method is further employed to prepare high-performance 2D perovskite nanoplate photosensor arrays. This strategy can be utilized as a guideline for the fundamental investigation of optical properties and the development of high-performance optoelectronics of perovskite materials including photosensors and displays.

Holistic energy landscape management in 2D/3D heterojunction via molecular engineering for efficient perovskite solar cells.

Constructing two-dimensional (2D) perovskite atop of 3D with energy landscape management is still a challenge in perovskite photovoltaics. Here, we report a strategy through designing a series of π-conjugated organic cations to construct stable 2D perovskites and to realize delicate energy level tunability at 2D/3D heterojunctions. As a result, the hole transfer energy barriers can be reduced both at heterojunctions and within 2D structures, and the preferable work function shift reduces charge accumulation at interface. Leveraging these insights and also benefitted from the superior interface contact between conjugated cations and poly(triarylamine) (PTAA) hole transporting layer, a solar cell with power conversion efficiency of 24.6% has been achieved, which is the highest among PTAA-based n-i-p devices to the best of our knowledge. The devices exhibit greatly enhanced stability and reproducibility. This approach is generic to several hole transporting materials, offering opportunities to realize high efficiency without using the unstable Spiro-OMeTAD.

Helical polymers for dissymmetric circularly polarized light imaging.

Control of the spin angular momentum (SAM) carried in a photon provides a technologically attractive element for next-generation quantum networks and spintronics1-5. However, the weak optical activity and inhomogeneity of thin films from chiral molecular crystals result in high noise and uncertainty in SAM detection. Brittleness of thin molecular crystals represents a further problem for device integration and practical realization of chiroptical quantum devices6-10. Despite considerable successes with highly dissymmetric optical materials based on chiral nanostructures11-13, the problem of integration of nanochiral materials with optical device platforms remains acute14-16. Here we report a simple yet powerful method to fabricate chiroptical flexible layers via supramolecular helical ordering of conjugated polymer chains. Their multiscale chirality and optical activity can be varied across the broad spectral range by chiral templating with volatile enantiomers. After template removal, chromophores remain stacked in one-dimensional helical nanofibrils producing a homogeneous chiroptical layer with drastically enhanced polarization-dependent absorbance, leading to well-resolved detection and visualization of SAM. This study provides a direct path to scalable realization of on-chip detection of the spin degree of freedom of photons necessary for encoded quantum information processing and high-resolution polarization imaging.

Depolymerization of plastics by means of electrified spatiotemporal heating.

Depolymerization is a promising strategy for recycling waste plastic into constituent monomers for subsequent repolymerization1. However, many commodity plastics cannot be selectively depolymerized using conventional thermochemical approaches, as it is difficult to control the reaction progress and pathway. Although catalysts can improve the selectivity, they are susceptible to performance degradation2. Here we present a catalyst-free, far-from-equilibrium thermochemical depolymerization method that can generate monomers from commodity plastics (polypropylene (PP) and poly(ethylene terephthalate) (PET)) by means of pyrolysis. This selective depolymerization process is realized by two features: (1) a spatial temperature gradient and (2) a temporal heating profile. The spatial temperature gradient is achieved using a bilayer structure of porous carbon felt, in which the top electrically heated layer generates and conducts heat down to the underlying reactor layer and plastic. The resulting temperature gradient promotes continuous melting, wicking, vaporization and reaction of the plastic as it encounters the increasing temperature traversing the bilayer, enabling a high degree of depolymerization. Meanwhile, pulsing the electrical current through the top heater layer generates a temporal heating profile that features periodic high peak temperatures (for example, about 600 °C) to enable depolymerization, yet the transient heating duration (for example, 0.11 s) can suppress unwanted side reactions. Using this approach, we depolymerized PP and PET to their monomers with yields of about 36% and about 43%, respectively. Overall, this electrified spatiotemporal heating (STH) approach potentially offers a solution to the global plastic waste problem.

Tailoring Molecular-Scale Contact at the Perovskite/Polymeric Hole-Transporting Material Interface for Efficient Solar Cells.

Perovskite solar cells (PSCs) have delivered a power conversion efficiency (PCE) of more than 25% and incorporating polymers as hole-transporting layers (HTLs) can further enhance the stability of devices toward the goal of commercialization. Among the various polymeric hole-transporting materials, poly(triaryl amine) (PTAA) is one of the promising HTL candidates with good stability; however, the hydrophobicity of PTAA causes problematic interfacial contact with the perovskite, limiting the device performance. Using molecular side-chain engineering, a uniform 2D perovskite interlayer with conjugated ligands, between 3D perovskites and PTAA is successfully constructed. Further, employing conjugated ligands as cohesive elements, perovskite/PTAA interfacial adhesion is significantly improved. As a result, the thin and lateral extended 2D/3D heterostructure enables as-fabricated PTAA-based PSCs to achieve a PCE of 23.7%, improved from the 18% of reference devices. Owing to the increased ion-migration energy barrier and conformal 2D coating, unencapsulated devices with the new ligands exhibit both superior thermal stability under 60 °C heating and moisture stability in ambient conditions.

Highly Conductive and Solution-Processable n-Doped Transparent Organic Conductor.

Transparent conductors (TCs) play a vital role in displays, solar cells, and emerging printed electronics. Here, we report a solution-processable n-doped organic conductor from copper-catalyzed cascade reactions in the air, which involves oxidative polymerization and reductive doping in one pot. The formed polymer ink is shelf-stable over 20 days and can endure storage temperatures from -20 to 65 °C. The optimized n-doped thin-film TC exhibits a low sheet resistance of 45 Ω/sq and a high transmittance (T550 > 80%), which can rival indium tin oxide. The transparent organic conductor exhibits excellent durability under accelerated weathering tests (85 °C/85% RH). Furthermore, the n-doped polymer film can also function as an electrode material with a high volumetric capacity. When it is paired with p-doped PEDOT:PSS, a record-high coloration efficiency is obtained in a dual-polymer electrochromic device.

Circularly Recyclable Polymers Featuring Topochemically Weakened Carbon-Carbon Bonds.

Closed-loop circular utilization of plastics is of manifold significance, yet energy-intensive and poorly selective scission of the ubiquitous carbon-carbon (C-C) bonds in contemporary commercial polymers pose tremendous challenges to envisioned recycling and upcycling scenarios. Here, we demonstrate a topochemical approach for creating elongated C-C bonds with a bond length of 1.57∼1.63 Å between repeating units in the solid state with decreased bond dissociation energies. Elongated bonds were introduced between the repeating units of 12 distinct polymers from three classes. In all cases, the materials exhibit rapid depolymerization via breakage of the elongated bond within a desirable temperature range (140∼260 °C) while otherwise remaining remarkably stable under harsh conditions. Furthermore, the topochemically prepared polymers are processable and 3D-printable while maintaining a high depolymerization yield and tunable mechanical properties. These results suggest that the crystalline polymers synthesized from simple photochemistry and without expensive catalysts are promising for practical applications with complete materials' circularity.

Radical Polymer-Based Organic Electrochemical Transistors.

Organic electrochemical transistors (OECTs) are an emerging platform for bioelectronic applications. Significant effort has been placed in designing advanced polymers that simultaneously transport both charge and ions (i.e., macromolecules that are mixed conductors). However, the considerations for mixed organic conductors are often different from the established principles that are well-known in the solid-state organic electronics field; thus, the discovery of new OECT macromolecular systems is highly desired. Here, we demonstrate a new materials system by blending a radical polymer (i.e., a macromolecule with a nonconjugated backbone and with stable open-shell sites at its pendant group) with a frequently used conjugated polymer. Specifically, poly(4-glycidyloxy-2,2,6,6-tetramethylpiperidine-1-oxyl) (PTEO) was blended with poly(3-hexylthiophene) (P3HT) to create thin films with distinct closed-shell and open-shell domains. Importantly, the sharp and unique oxidation-reduction (redox) potential associated with the radical moieties of the PTEO chain provided a distinct actuation feature to the blended films that modulated the ionic transport of the OECT devices. In turn, this led to controlled regulation of the doping of the P3HT phase in the composite film. By decoupling the ionic and electronic transport into two distinct phases and by using an ion transport phase with well-controlled redox activity, never-before-seen performance for a P3HT-based OECT was observed. That is, at loadings as low as 5% PTEO (by weight) OECTs achieved figure-of-merit (i.e., µC*) values >150 F V-1 cm-1 s-1, which place the performance on the same order as state-of-the-art conjugated polymers despite the relatively common conjugated macromolecular moiety implemented. As such, this effort presents a design platform by which to readily create a tailored OECT response through strategic macromolecular selection and polymer processing.

Tetracyanocyclopentadienide-Based Stable Poly(aromatic) Anions.

Polyelectrolytes, a class of polymer with ionized functional groups in their repeating units, are widely used in various applications. Many ionized groups have been incorporated into polyelectrolytes, but aromatic anions are rarely investigated. Here, we first successfully incorporate a stable tetracyanocyclopentadienide (TCCp) aromatic anion into polynorbornene (PNb)-based electrolytes (PNb-TCCp) through ring-opening metathesis polymerization (ROMP) with controllable molecular weight and low polydispersity. PNb-TCCp shows a high ionic conductivity of 4.5 × 10-5 S/cm in thin films. Due to its highly stable aromatic anion groups and favorable interactions with aromatic cations, it could improve thermal stability of doped conjugated polymers. Pairing with doped poly(3,4-ethylenedioxythiophene) (PEDOT) through salt metathesis, the generated poly ion complex PEDOT:PNb-TCCp retains its conductivity up to 180 °C.

Printing dynamic color palettes and layered textures through modeling-guided stacking of electrochromic polymers.

In printable electrochromic polymer (ECP) displays, a wide color gamut, precise patterning, and controllable color switching are important. However, it is a significant challenge to achieve such features synergistically. Here, we present a solution-processable ECP stacking scheme, where a crosslinker is co-processed with three primary ECPs (ECP-Cyan, ECP-Magenta, and ECP-Yellow), which endows the primary ECPs with solvent-resistant properties and allows them to be sequentially deposited. Via varying the film thickness of each ECP layer, a full-color palette can be constructed. The ECP stacking strategy is further integrated with photolithography. Delicate multilayer patterns with overhang and undercut textures can be generated, allowing information displays with spatial dimensionality. In addition, via modulating the stacking sequence, the electrochemical onset potentials of the ECP components can be synchronized to reduce unwanted intermediate colors that are often found in co-processed ECPs. Should specific color properties be desired, COMSOL modeling could be applied to guide the stacking. We believe that this ECP stacking strategy opens a new avenue for electrochromic printing and displays.

Multifunctional Conjugated Ligand Engineering for Stable and Efficient Perovskite Solar Cells.

Surface passivation is an effective way to boost the efficiency and stability of perovskite solar cells (PSCs). However, a key challenge faced by most of the passivation strategies is reducing the interface charge recombination without imposing energy barriers to charge extraction. Here, a novel multifunctional semiconducting organic ammonium cationic interface modifier inserted between the light-harvesting perovskite film and the hole-transporting layer is reported. It is shown that the conjugated cations can directly extract holes from perovskite efficiently, and simultaneously reduce interface non-radiative recombination. Together with improved energy level alignment and the stabilized interface in the device, a triple-cation mixed-halide medium-bandgap PSC with an excellent power conversion efficiency of 22.06% (improved from 19.94%) and suppressed ion migration and halide phase segregation, which lead to a long-term operational stability, is demonstrated. This strategy provides a new practical method of interface engineering in PSCs toward improved efficiency and stability.

Bioinspired Dynamic Camouflage from Colloidal Nanocrystals Embedded Electrochromics.

Camouflage is often seen in animals, and it presents in both passive and active forms. For instance, the wings of Closterocerus coffeellae exhibit distinct appearances against different backgrounds, while the chameleon actively changes its skin colors to morph into the environment. Herein, we report an artificial skin-like optoelectronic device that enables actively changing appearances and passively morphing into the environment by manipulating light-matter interactions with electrochromic polymers and photonic colloid nanocrystals. To construct the new electrochromic device, highly reflective, yet transmissive photonic nanocrystals are introduced into the gel electrolyte and sandwiched between the layers of electrochromic polymers and ion storage materials. Through voltage-controlled color switching of electrochromic polymers from colored state to bleached state, the degree of light absorbance, transmittance, and reflectance can be finely balanced and precisely modulated with the device. A broad synthesized color gamut and angle-dependent visual effects can be realized on this electronic skin-like device.

Catalytic Synthesis of Conjugated Azopolymers from Aromatic Diazides.

Conjugated polymers containing main chain azoarene repeat units are synthesized by a dinickel catalyzed N=N coupling reaction of aromatic diazides. The polymerization exhibits broad substrate scope and is compatible with heterocycles commonly featured in high performance organic materials, including carbazole, thiophene, propylenedioxythiophene (ProDOT), diketopyrrolopyrrole (DPP), and isoindigo. Copolymerizations can be carried out using monomer mixtures, and monoazide chain stoppers can be used to install well-defined end groups. Azopolymers possess unique properties owing to the functionality of the azo linkages. For example, protonation at nitrogen results in LUMO lowering and red-shifted absorption bands. Additionally, N=N bonds possess low-lying π* levels, allowing azopolymers to be reversibly reduced under mild conditions.

Ambient Oxygen-Doped Conjugated Polymer for pH-Activatable Aggregation-Enhanced Photoacoustic Imaging in the Second Near-Infrared Window.

Photoacoustic (PA) probes absorbing in the second near-infrared (NIR-II: 1000-1700 nm) window hold great promise for deep-tissue diagnosis and treatment. Currently, NIR-II PA probes typically involve complex synthesis and surfactant adjuvant for processing and delivery. Furthermore, these NIR-II PA probes are "always-on," leading to inadequate signal-to-background ratio and low specificity. To address these challenges, this study reports a pH-activatable and aggregation-enhanced NIR-II PA probe. Without using any toxic or exotic oxidants, the selected polymer (PPE) is readily doped by oxygen in an ambient environment and simultaneously red-shifts its absorption profile from visible to NIR-II region. By virtue of the carboxyl groups on the side chains, oxygen-doped PPE is readily water-soluble at a physiological pH but tends to aggregate in an acidic environment. The pH-induced aggregation results in a significant PA enhancement and thus allows specific PA imaging of acidic tumor microenvironment in vivo. Our study provides a facile and surfactant-free strategy for achieving water-soluble and pH-responsive NIR-II PA probes, which could be applied for diagnoses of cancer and other diseases associated with changes in pH. It paves the way for the development of new activatable NIR-II imaging probes and also could facilitate the investigation of biological and pathological processes in deep tissue.

n-type charge transport in heavily p-doped polymers.

It is commonly assumed that charge-carrier transport in doped π-conjugated polymers is dominated by one type of charge carrier, either holes or electrons, as determined by the chemistry of the dopant. Here, through Seebeck coefficient and Hall effect measurements, we show that mobile electrons contribute substantially to charge-carrier transport in π-conjugated polymers that are heavily p-doped with strong electron acceptors. Specifically, the Seebeck coefficient of several p-doped polymers changes sign from positive to negative as the concentration of the oxidizing agents FeCl3 or NOBF4 increase, and Hall effect measurements for the same p-doped polymers reveal that electrons become the dominant delocalized charge carriers. Ultraviolet and inverse photoelectron spectroscopy measurements show that doping with oxidizing agents results in elimination of the transport gap at high doping concentrations. This approach of heavy p-type doping is demonstrated to provide a promising route to high-performance n-type organic thermoelectric materials.