RESUMO
[This corrects the article DOI: 10.1021/acs.iecr.1c04080.].
RESUMO
This communication proposes a preliminary simplified kinetic model for the hydrogenation of 1-phenyl-1,2-propanedione that can render up to eight compounds, involving regioselectivity and enantioselectivity. The catalytic system comprises two functionalities; the heterogeneous catalyst (Ir/TiO2) plays the role for the hydrogenation, whereas the adsorption/binding to the active site is played by a chiral molecule (cinchonidine), added to the reaction mixture. The reaction occurs at room temperature and total pressure of 40 bar. The product distribution shows competitive parallel and series pathways with up to 12 possible reactions. Despite the complexity of both reaction and catalyst system, a simplified kinetic model was able to predict the concentrations profiles. The model assumes the reactions to be apparent first order in the concentrations of reactant and intermediate products, while the kinetic constants include all other effects (partial pressure of hydrogen, solvent and catalyst effects, and the concentration of the chiral additive). The concentration profiles were well-modeled with low residual values. The errors in the kinetic constants (k-values) were small for all relevant parameters of the main reaction pathways. Two k-values are nil, which is the lower bound imposed in the model, suggesting that these reaction pathways are likely negligible. The positive outcome from this simplified model suggests that the process can be formally treated as a first-order irreversible homogeneous catalyzed reaction, despite a heterogeneous catalyst was employed (with a modifier). Despite the promising results, the model must be extended for a more general applicability, or conditions where it is applicable.
RESUMO
This work reports initial results on the effect of low concentrations (ppm level) of a stabilizing agent (2,6-di-tert-butyl-4-methylphenol, BHT) present in an off-the-shelf solvent on the catalyst performance for the hydrogenolysis of γ-butyrolactone over Cu-ZnO-based catalysts. Tetrahydrofuran (THF) was employed as an alternative solvent in the hydrogenolysis of γ-butyrolactone. It was found that the Cu-ZnO catalyst performance using a reference solvent (1,4-dioxane) was good, meaning that the equilibrium conversion was achieved in 240 min, while a zero conversion was found when employing tetrahydrofuran. The deactivation was studied in more detail, arriving at the preliminary conclusion that one phenomenon seems to play a role: the poisoning effect of a solvent additive present at the ppm level (BHT) that appears to inhibit the reaction completely over a Cu-ZnO catalyst. The BHT effect was also visible over a commercial Cu-ZnO-MgO-Al2O3 catalyst but less severe than that over the Cu-ZnO catalyst. Hence, the commercial catalyst is more tolerant to the solvent additive, probably due to the higher surface area. The study illustrates the importance of solvent choice and purification for applications such as three-phase-catalyzed reactions to achieve optimal performance.
RESUMO
Hydrotalcites are an important class of layered materials, displaying ion-exchange, adsorption, and base catalytic properties. The crystallization kinetics for hydrotalcites are however hardly available. Nevertheless, as their reconstruction from the oxides (also called as "memory effect") is considered a synthesis route, this can be used to study the crystallization phenomena. This note looks at the reconstruction kinetics of a Mg-Al hydrotalcite using previously reported kinetic expressions. It was found that high temperature is beneficial if the process is controlled by nucleation. The temperature effect is less obvious when the process reaches a diffusional control regime. For example, temperature is beneficial to shorten the processing time in a nucleation-regime conversion (e.g., 40%). However, to achieve a high conversion (e.g., 98-99%), an intermediate temperature shows the optimal condition, i.e., shortest processing time. The work shows useful side effects of diffusional control. It also highlights the importance of obtaining the kinetics over the entire range for process optimization and, finally, emphasizes that both parameters in the Avrami-Erofe'ev model impact the time required to achieve a given conversion. Directions for further studies to understand the kinetic-process relationships have been highlighted.
RESUMO
Correction for 'Temperature control in DRIFT cells used for in situ and operando studies: where do we stand today?' by Ignacio Melián-Cabrera, Phys. Chem. Chem. Phys., 2020, DOI: .
RESUMO
Vibrational spectroscopy is considered a workhorse in heterogeneous catalysis. This group of techniques has allowed an understanding of the structure of the solid catalysts, not only with ex situ methodologies but also with in situ and operando studies. In this perspective, an appraisal of diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) is provided, in particular regarding the heat transfer limitations in the cell, and solutions, which can affect the measurement, with consequences in kinetic studies.
RESUMO
A new theoretical and practical framework has been developed through operando study of the zeolite catalytic cracking of low-density polyethylene (as a model reaction) under reaction conditions. Results show that microporous ZSM-5 gives rise to less cracking products. Hierarchical ZSM-5 zeolites are more active cracking catalysts, rendering more C2 -C5 hydrocarbons, with a delayed deactivation due to the secondary porosity. This tool in combination with thermogravimetric analysis provides complementary and valuable information for the study, and design of advanced catalysts.
RESUMO
We report an efficient one-pot conversion of glycerol (GLY) to methyl lactate (MLACT) in methanol in good yields (73 % at 95 % GLY conversion) by using Au nanoparticles on commercially available ultra-stable zeolite-Y (USY) as the catalyst (160 °C, air, 47 bar pressure, 0.25 M GLY, GLY-to-Au mol ratio of 1407, 10 h). The best results were obtained with zeolite USY-600, a catalyst that has both Lewis and Brønsted sites. This methodology provides a direct chemo-catalytic route for the synthesis of MLACT from GLY. MLACT is stable under the reaction conditions, and the Au/USY catalyst was recycled without a decrease in the activity and selectivity.
Assuntos
Glicerol/química , Ouro/química , Lactatos/química , Catálise , Zeolitas/químicaRESUMO
Detemplation of zeolite beta has been successfully achieved at low temperature by controlled oxidation of the template using H2O2 and catalyzed by traces of Fe3+. With this approach, unlike calcination, the pristine structure of the material is well preserved; no extra-framework aluminium is formed.