Retention strength of ball-attachment titanium post for removable partial denture or overdenture

Aim: To evaluate the retention of an endodontic titanium postwith a spherical head for removable partial denture or overdentureattachment according to surface treatment type. Methods: Sixtyhealthy single-rooted teeth, sectioned at the enamel/cementumjunction, were treated endodontically and steadily fixed in theembedding acrylic resin. The titanium posts were subdivided intofour groups: control, no surface treatment (Ctrl); posts with macroretentivegrooves (MR); air abrasion of the post surface (AB); andposts with macro-retentive grooves and air abrasion of the postsurface (MR+AB). The posts were luted in the root canal usingself-adhesive dual resin cement. Pull-out testing was performedusing a universal testing machine until complete detachment wasachieved. After pull-out testing, the metallic posts were examinedunder an optical microscope and the failures were classifiedbased on the cement distribution pattern on the extracted posts:0, no cement left on the post (cement/post failure); 1, postsurface partially covered by adhered cement (post/cement anddentin/cement mixed failure); 2, post surface completely coveredby cement (dentin/cement failure). The retention data wereanalyzed by one-way ANOVA, Bonferroni­Dunn test (p<0.05)and Weibull analysis. Results: AB showed the highest retentionvalue (485.37±68.36), followed by MR+AB (355.80±118.47), MR(224.63±42.54) and Ctrl (113.12 ± 51.32). AB and MR showedthe highest Weibull moduli. Conclusions: The data indicatedthat air abrasion alone could significantly increase the retentionof titanium posts/attachments for use with overdentures orremovable partial denture

Permanence of Modifications in Oral Microcirculation in Ex-Smokers.

BACKGROUND The aim of this study was to assess the long-term effects of smoking and to investigate the permanence of this damage to the oral microcirculation. MATERIAL AND METHODS We recruited 75 patients and divided them into 3 groups: group 1 was composed of 25 healthy non-smokers, group 2 was composed of 25 healthy current smokers, and group 3 was composed of 25 healthy ex-smokers. Video-capillaroscopic examination was performed on all patients. The video-capillaroscopic investigation was performed on patients in sitting position, always with the same light source, at the same room temperature (23°C), in the morning, with the same operator (GAS), and was repeated many times for every area under investigation. An enlargement of 200× allowed us to explore point-by-point all the morpho-structural characteristics of the capillaroscopic field. For non-parametric data, we evaluated the visibility of the loops and their position in relation to the surface of the mucosa. The evaluated parametric data were length of capillary loop, diameter of the loop, capillary tortuosity, and capillary density. RESULTS Our study clearly shows there was no remission of vascular damage, even 13 years after smoking cessation. CONCLUSIONS Our research shows that that the effects of smoking are still visible in ex-smokers, even at 13 years after cessation and also that ex-smokers are still subject to the risk of oral pathologies in the interval of time that we considered.

Gingival displacement using diode laser or retraction cords: A comparative clinical study.

PURPOSE: To compare two systems used for conditioning the gingival sulcus and exposing the finish line before the final impression for a fixed denture: retraction cords and diode laser. METHODS: All subjects participating in the study had healthy gingival and periodontal status before intervention for fixed prosthesis. 74 abutments for complete crown restoration were randomly divided into two groups for displacing the gingival sulcus before the final impression: gingival retraction cords (RC) and diode laser (DL). The height of the clinical crowns was measured by a blinded examiner in three points of the buccal surface (mesial, midline and distal) at four different times: after tooth preparation (T0), 15 days after tooth preparation, before exposing the finish line with RC or with DL (T1), 10 minutes after exposing the finish line (T2), and 15 days after the final impression was taken (T3). The amount of gingival retraction produced (ΔT2-T1) and restoration to baseline (ΔT3-T1) were calculated. Ease of technique and patient comfort were evaluated through the Visual Analog Scale. The time required to carry out the technique and bleeding during and after the conditioning procedure were also evaluated. RESULTS: There was no difference between the two techniques with regard to the height differences: ΔT2-T1 was 0.65±0.33 for RC and 0.66#177;0.43 for the DL (P= 0.966), while ΔT3-T1 was 0.03#177;0.27 for RC and 0.02#177;0.46 for DL (P= 0.286). DL required less time, was easier for the operator and more comfortable than RC for the patient (all P<0.001). CLINICAL SIGNIFICANCE: The amount of gingival retraction and restoration to baseline resulting from use of gingival retraction cords or diode laser technique is similar, but diode laser required less time, was simpler for the operator and was more comfortable to the patient than retraction cords.

Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements.

This in vitro study evaluated the marginal microleakage of composite inlays luted with 3 different cement systems. The null hypothesis was that the luting materials would not influence dye penetration, showing the same degree of microleakage. Thirty-six sound molars were selected, mesio-occlusodistal cavities were prepared, and the teeth were randomly divided into 3 groups (n = 12). Composite resin inlay restorations were made and cemented using a dual-curing resin cement (Calibra), a light-curing flowable composite (Charisma Flow), or a self-adhesive resin cement (RelyX Unicem). The restored teeth were subjected to fatigue cycles and immersed in 0.5% basic fuchsin dye for 24 hours. Two orthogonal cuts were made to enable evaluation of dye penetration at the cervical and occlusal margins. The sections were evaluated with a 4-point scale ranging from 0 (no penetration) to 3 (penetration up to the cavity floor [occlusal margins] or axial wall [cervical margins]). The Calibra and Charisma Flow groups showed greater microleakage, notably at the cervical margins, whereas RelyX Unicem specimens showed the least dye penetration. Significant differences were found between the Calibra and Charisma Flow groups and between the Charisma Flow and RelyX Unicem groups (P < 0.05). No statistically significant differences were detected between the Calibra and RelyX Unicem groups. The microleakage associated with the flowable composite was significantly greater than that associated with both resin cements, results that discourage its use for luting of Class II composite inlays.

Tooth-implant connection in removable denture.

When the patient cannot be rehabilitated with a fixed denture, or when he does not succeed in adapting to a traditional removable denture, a possible alternative solution consists in the use of a limited number of implants, placed in strategic positions in the arches of the patient, and subsequently connected to their residual teeth. The aim of this review is to evaluate the progress made on connections between teeth and implants in removable denture, to analyze their advantages and disadvantages and to compare the survival rate, both of the teeth and of the implants used as abutments, present in the various studies taken into examination, with the aim of being able to evaluate the effectiveness of this rehabilitative option. The concept of preserving residual teeth, even if these are unfavorably distributed, and inserting a minimum number of implants in strategic positions, thanks to which an area of favorable support for the denture can be created, seems reasonable; this will guarantee a better adaptation of the patient to the denture, as well as an improvement in the quality of life. The study of articles present in literature suggests that the survival rate of the implants in removable dentures, supported by teeth and implants through traditional systems of anchorage, appears to be quite high. However, further studies with a higher level of evidence, more representative test subjects and a longer follow-up period are necessary, in order to confirm the validity of this rehabilitative solution.

The Role of Antibiotic Prophylaxis in Reducing Bacterial Contamination of Autologous Bone Graft Collected from Implant Site.

The aim of this study was to evaluate if antibiotic prophylaxis reduces the bacterial contamination of bone particles collected directly from the burs used for implant site preparation. Thirty-four patients underwent the surgical procedures for a total of 34 implant sites. One 1 gr. tablet of amoxicillin + clavulanic acid was given to the test group 12 hours and 1 hour before the surgery. The control group did not take antibiotic prophylaxis. Bone particles were collected and centrifuged. The suspensions were subjected to serial dilutions and each dilution was examined twice using a spatulation technique in Trypticase Soy Agar (TSA), in Sabouraud Dextrose Agar, and in Mitis Salivarius Agar (MSA). The number of colonies was calculated and the identification of various microorganisms was made. The most represented species, in both groups of patients, belonged to the "oral Streptococci." For TSA, the test and control groups differed significantly (p = 0.018). Conversely, there was no significant difference for MSA (p = 0.201) and for the number of bacterial species isolated in the samples of the two groups of patients (p = 0.898). The antibiotic prophylaxis reduced, but did not cancel, the risk of infection of the autogenous particulate bone graft. This trial is registered with IRCT2017102537002N1.

Intraoral electrostimulator for xerostomia relief: a long-term, multicenter, open-label, uncontrolled, clinical trial.

OBJECTIVE: A previous sham-controlled multinational study demonstrated the short-term efficacy and safety for xerostomia treatment of an intraoral device that delivers electrostimulation to the lingual nerve. The objective of this study was to test the hypothesis that those beneficial effects would be sustained over an 11-month period. STUDY DESIGN: The device was tested on a mixed sample of 94 patients with xerostomia in an open-label, uncontrolled, prospective multicenter trial. Statutory outcome assessments were done at 5th, 8th, and 11th months and analyzed by multiple comparisons. RESULTS: Improvements achieved at month 5 from baseline were sustained throughout the follow-up period for the primary outcome, xerostomia severity, and the secondary outcomes resting whole salivary flow rate, xerostomia frequency, oral discomfort, and difficulties in speech, swallowing, and sleeping. No significant side effects were detected. CONCLUSIONS: The beneficial effects of a removable intraoral electrostimulating device were sustained for an 11-month period.

Efficacy and safety of an intraoral electrostimulation device for xerostomia relief: a multicenter, randomized trial.

OBJECTIVE: To evaluate the efficacy and safety of an intraoral electrostimulation device, consisting of stimulating electrodes, an electronic circuit, and a power source, in treating xerostomia. The device delivers electrostimulation through the oral mucosa to the lingual nerve in order to enhance the salivary reflex. METHODS: The device was tested on a sample of patients with xerostomia due to Sjögren's syndrome and other sicca conditions in a 2-stage prospective, randomized, multicenter trial. Stage I was a double-blind, crossover stage designed to compare the effects of the electrically active device with the sham device, each used for 1 month, and stage II was a 3-month open-label stage designed to assess the long-term effects of the active device. Improvement in xerostomia severity from baseline was the primary outcome measure. RESULTS: A total of 114 patients were randomized. In stage I, the active device performed better than the sham device for patient-reported xerostomia severity (P<0.002), xerostomia frequency (P<0.05), quality of life impairment (P<0.01), and swallowing difficulty (P<0.02). At the end of stage II, statistically significant improvements were verified for patient-reported xerostomia severity (P<0.0001), xerostomia frequency (P<0.0001), oral discomfort (P<0.001), speech difficulty (P<0.02), sleeping difficulty (P<0.001), and resting salivary flow rate (P<0.01). CONCLUSION: Our findings indicate that daily use of the device alleviated oral dryness, discomfort, and some complications of xerostomia, such as speech and sleeping difficulties, and increased salivary output. The results show a cumulative positive effect of the device over the period of the study, from baseline to the end of the trial.

Resistance to disinfection of a polymicrobial association contaminating the surface of elastomeric dental impressions.

The aim of this study was to evaluate the ability to resist disinfection of a polymicrobial association contaminating the surface of dental impressions obtained with two different elastomers: a polyether (Impregum) and an addition-polymerized silicone (Elite). Impressions were contaminated with a mixture of three biofilm-forming microorganisms (Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans) and disinfected immediately after contamination, or after microbial layers were allowed to develop during a six-hour storage. Two commercial disinfectants were tested: MD 520 containing 0.5% glutaraldehyde and Sterigum Powder without glutaraldehyde. Residual contamination was recovered by mechanical rinsing immediately after disinfection and after a six-hour storage of disinfected impressions, and assessed by colony counting. Both disinfectants tested were shown to be effective in reducing the microbial presence on the impression materials, achieving at least a 102 reduction of microbial counts compared to water rinsing. However, Sterigum was generally less effective on the Elite elastomer and could not grant disinfection on six-hour aged P. aeruginosa and C. albicans microbial layers. The results of this study suggest that the materials used for the impressions influence the efficacy of disinfection. Disinfectants should be tested according to conditions encountered in everyday clinical practice and the need for immediate disinfection of impressions should be clearly indicated by manufacturers.

The effect of immersion disinfection procedures on dimensional stability of two elastomeric impression materials.

The aim of this study was to determine the effect of immersion disinfection procedures on the dimensional stability of two elastomeric impression materials. Impressions of a stainless steel die were made with polyether (PE) and with addition-polymerized silicone rubber (PVS). The test specimens underwent disinfection treatment by immersion in two commercially available solutions containing quaternary ammonium compounds (Sterigum Powder, SP) and glutaraldehyde plus an amino derivative (MD520, MD), respectively. The impressions were measured at 4 different time points: before any disinfection treatment (T0); after the first disinfection (T1); 6 hours after the first disinfection (T2); after the second disinfection, carried out 6 hours after the first one (T3). Impressions which were not disinfected served as controls. When both impression materials were disinfected with SP, significant differences were detected among all measurements (P < 0.0001), with the exception of T2 vs T3 (P > 0.05). On the other hand, when MD was used, significant differences were found when T0 measurement was compared to T1, T2 and T3 measurements (P = 0.0043 for PE, and P = 0.0014 for PVS). The dimensional change of all material/disinfectant combinations was always

The effects of sugar-free chewing gums on dental plaque regrowth: a comparative study.

UNLABELLED: Sugar-free chewing gum has been claimed to be a useful means of reducing dental plaque accumulation. The incorporation of additives, such as enzymes, abrasives and divalent metal ions, into gum formulations might improve their antiplaque activity, particularly at the buccal and lingual surfaces of the teeth. OBJECTIVES: The aim of this study was to investigate the plaque inhibitory effects of three sugar-free chewing gums each containing lactoperoxidase (LP), micro granules of silicon dioxide (SD), and zinc gluconate (ZG). METHODS: The study was an observer-masked, randomized cross-over design balanced for carryover effects, involving 12 healthy volunteers in a 4-day plaque regrowth model. An additive-free (AF) gum served as positive/negative control for occlusal and smooth surfaces, respectively. On day 1, subjects received professional prophylaxis, suspended oral hygiene measures, and commenced chewing their allocated product. Gum chewing was one piece chewed for 30min 4 times a day. On day 5, subjects were scored for disclosed plaque. RESULTS: There were no significant differences in antiplaque activity of the gums tested, neither for the smooth nor for the occlusal surfaces (P=0.447 and P=0.418, respectively). Similar results were obtained for the anterior and posterior sites of smooth surfaces (P>0.05), and for the lower and upper sites of occlusal surfaces (P=0.451 and P=0.53, respectively). CONCLUSIONS: These findings suggest that the chewing gums containing LP, SD and ZG would provide no plaque inhibitory effects on smooth surfaces. The gums containing these additives, therefore, should not be recommended as adjuncts to mechanical oral hygiene.

Candida pararugosa isolation from the oral cavity of an Italian denture wearer.

Candida pararugosa was first isolated from human feces, but after the initial description no further recovery from humans has been reported. During a study on oral Candida colonization in denture wearers living in Palermo (Italy), we isolated C. pararugosa from a 61-year-old woman without signs of oral candidosis. This constitutes, to the authors' knowledge, the first isolation of C. pararugosa from the oral cavity. After six months, colonization by C. pararugosa persisted, suggesting that this species could be a component of the normal oral microbiota. The identification procedure we used could be useful in elucidating the epidemiology of C. pararugosa and for establishing its clinical significance.