Clinical Acuity in the Emergency Department and Injury Severity Determine Hospital Admission of Older Patients with Low Energy Falls: Outcomes from a Prospective Feasibility Study.

BACKGROUND: Low energy falls (LEF) in older adults constitute a relevant cause for emergency department (ED) visits, hospital admission and in-hospital mortality. Patient-reported outcome measures containing information about patients' medical, mental and social health problems might support disposition and therapy decisions. We investigated the value of a tablet-based (self-)assessment in predicting hospital admission and in-hospital mortality. METHODS: Patients 65 years or older, consecutively presenting with LEF to our level I trauma center ED (from November 2020 to March 2021), were eligible for inclusion in this prospective observational study. The primary endpoint was hospital admission; secondary endpoints were in-hospital mortality and the use of the tablet for self-reported assessment. Multivariate logistic regression models were calculated to measure the association between clinical findings and endpoints. RESULTS: Of 618 eligible patients, 201 patients were included. The median age was 82 years (62.7% women). The hospital admission rate was 45.3% (110/201), with an in-hospital mortality rate of 3.6% (4/110). Polypharmacy (odds ratio (OR): 8.48; 95% confidence interval (95%CI) 1.21-59.37, p = 0.03), lower emergency severity index (ESI) scores (OR: 0.33; 95%CI 0.17-0.64, p = 0.001) and increasing injury severity score (ISS) (OR: 1.54; 95%CI 1.32-1.79, p < 0.001) were associated with hospital admission. The Charlson comorbidity index (CCI) was significantly associated with in-hospital mortality (OR: 2.60; 95%CI: 1.17-5.81, p = 0.03). Increasing age (OR: 0.94; 95%CI: 0.89-0.99, p = 0.03) and frailty (OR: 0.71; 95%CI: 0.51-0.99, p = 0.04) were associated with the incapability of tablet use. CONCLUSIONS: The severity of fall-related injuries and the clinical acuity are easily accessible, relevant predictors for hospital admission. Tablet-based (self-)assessment may be feasible and acceptable during ED visits and might help facilitate comprehensive geriatric assessments during ED stay.

Distal Biceps Tendon Repair Using a Modified Double-Incision Technique: Patient-Reported Outcomes With 10-Year Follow-up.

BACKGROUND: In the setting of complete distal biceps tendon rupture, surgical repair has become the standard of care to restore optimal elbow function, but the optimal approach and method of tendon fixation are still subjects of debate and have remained controversial for more than half a century. PURPOSE: To evaluate patient-reported long-term outcomes after distal biceps tendon repair using a modified double-incision technique. STUDY DESIGN: Case series; Level of evidence, 4. METHODS: We reviewed primary distal biceps tendon repairs after isolated tendon rupture using the modified muscle-splitting double-incision approach and transosseous suture fixation technique described by Morrey et al (1985), which had been performed at our level 1 trauma center between January 2000 and December 2013. Outcome measures included the subjective elbow value (SEV), the Oxford Elbow Score (OES) with its 3 domains (function, pain, and social-psychological), a self-performed hook test, and the 3-level version of the EuroQoL 5-dimensional instrument (EQ-5D-3L) as a measure of health status. Levels of overall satisfaction were determined by asking whether the patient would consent to the operation again. In addition, patients were asked to report any complications. RESULTS: A total of 30 patients met the inclusion criteria, and 25 patients were available for the survey. Mean age at the time of rupture was 47 years. All patients were male. Mean follow-up was 120 months (range, 57-207 months). The follow-up rate was 83.34%. The following outcome results were obtained: SEV, 88.16% ± 25.18%; OES, 43.80 ± 10.56 out of 48 points; OES Pain, 92.50% ± 23.03%; OES Function, 92.25% ± 22.19%; OES Social-Psychological, 89% ± 23.68%; EQ-5D-3L, 0.93 ± 0.21. All patients described a negative hook test. Patient-reported complications included painless limitation in forearm rotation in 8% of patients (n = 2); reduced flexion and forearm rotation strength with and without pain in 8% (n = 2) and 4% (n = 1), respectively; synostosis after 1 year requiring revision surgery in 4% (n = 1); and transient wrist drop in 4% (n = 1). The overall complication rate was 28% (7/25), and 96% (n = 24) would consent to the operation again. CONCLUSION: Despite the cited approach-related morbidity, we report an excellent patient-reported long-term outcome for the double-incision distal biceps repair technique.

Correlation between Oxford Elbow Score and Single Assessment Numeric Evaluation: Is one simple question enough?

BACKGROUND: The aim of this study is to evaluate the correlation between the Oxford Elbow Score (OES) and Single Assessment Numeric Evaluation (SANE). To date, there has been no study investigating a correlation between this patient-reported outcome measure and SANE. METHODS: Between December 2018 and February 2019, all patients who underwent consultation for elbow pathology and completed the OES and SANE were retrospectively analyzed. Pearson correlation coefficient between the OES and SANE was calculated. Variables, including age, gender, diagnosis, chief complaint for consultation, and pain level on the visual analog scale (VAS), were also collected, and a mixed effects linear regression model was used to identify predictors for higher correlation. RESULTS: One hundred seven consultations of 86 patients were analyzed. The mean SANE and OES were 62.13% and 60.36%, respectively. Both scores correlated highly (r = 0.903). Across the OES domains, the strongest correlation was found between SANE and the OES psychosocial domain (r = 0.885). High correlations were also found between SANE and the OES function (r = 0.847) and OES pain (r = 0.804) domains. All values were statistically significant (P < .001). A moderate inverse correlation was found between SANE and VAS (r = -0.631). Aside from SANE, the VAS was identified as a significant predictor of the OES. CONCLUSION: SANE correlates highly with the OES. It is an easy tool for assessing the condition of the elbow joint, can be obtained without any license or payment restrictions, and should be considered as a worthwhile adjunct to currently used scores.

Axillary Artery Dissection and Thrombosis after Closed Proximal Humerus Fracture - a Rare Interdisciplinary Challenge. / Dissektion und Thrombosierung der Arteria axillaris bei geschlossener, proximaler Humerusfraktur ­ eine seltene interdisziplinäre Herausforderung.

BACKGROUND: Proximal humerus fractures account for 4 - 6% of all fractures and are a common result of low-energy trauma in the elderly. Concomitant neurovascular injury of the neighboring axillary artery and brachial plexus is a rarity, but has enormous impact on therapy, rehabilitation and prognosis. Diagnosis of axillary artery injury may be delayed due to its varied clinical presentation and lead to prolonged ischemia, distal necrosis and even loss of limb. Thorough clinical examination, high suspicion and identification of known predictors can be helpful in early diagnosis of this rare injury. PATIENTS/MATERIAL AND METHODS: We report a case of an intoxicated 76-year-old male who sustained a dislocated proximal humerus fracture, resulting in concomitant brachial plexopathy and axillary artery dissection with secondary thrombosis after a low-energy fall from standing height. Due to mistriage as a neurological emergency the somnolent patient presented under delayed circumstances at our traumatological emergency department, demonstrating pain, paleness, paralysis, paresthesia and non-palpable wrist pulses. Diagnosis was made through high suspicion after clinical examination with the aid of CT angiography. Emergent open reduction and anatomic shoulder hemiarthroplasty was performed followed by axillobrachial interposition grafting using a reversed saphenous vein graft and brachial plexus exploration. RESULTS: The surgical treatments were uncomplicated. The affected limb remains viable at 6-week follow-up; however, active shoulder function is limited due to residual brachial plexopathy. CONCLUSION: Despite early diagnosis and management of this rare injury, the prognosis for functional recovery is guarded and largely dictated by the extent of neurological injury in the setting of concomitant brachial plexopathy. Brachial plexopathy is highly associated with axillary artery injury and its impact often underestimated in comparison due to its non-limb-threatening nature in the acute setting. Future studies should focus on the long-term prognosis for functional recovery in patients with this rare injury pattern.

Monocortical fixation of the coracoid in the Latarjet procedure is significantly weaker than bicortical fixation.

PURPOSE: A crucial step of the Latarjet procedure is the fixation of the coracoid process onto the glenoid. Multiple problems associated with the fixation have been described, including lesions of the suprascapular nerve due to prominence of the screw or bicortical drilling. The purpose of the present study was to evaluate whether monocortical fixation, without perforating the posterior glenoid cortex, would provide sufficient graft stability. METHODS: Coracoid transfer was performed in 14 scapula models (Sawbones®, Composite Scapula, 4th generation). Two groups were assigned: in one group, fixation was achieved with two screws that did not perforate the posterior cortex of the glenoid neck (monocortical fixation), in the other group, fixation was achieved with perforation of the posterior cortex (bicortical fixation). The ultimate failure load and mode of failure were evaluated biomechanically. RESULTS: Monocortical fixation was a significantly weaker construct than bicortical fixation (median failure load 221 N, interquartile range 211-297 vs. median failure load 423 N, interquartile range 273-497; p = 0.017). Failure was either due to a pullout of the screws from the socket or a fracture of the glenoid. There was no significant difference in the mode of failure between the two groups (n.s.). CONCLUSION: Monocortical fixation was significantly weaker than bicortical fixation. However, bicortical drilling and overly long screws may jeopardize the suprascapular nerve. Thus, anatomic knowledge about the safe zone at the posterior rim of the glenoid is crucial. Until further research has evaluated, if the inferior stability is clinically relevant, clinicians should be cautious to use a monocortical fixation technique for the coracoid graft.

[Isolated fracture of the coracoid process in a 14-year-old national water polo player : Case example]. / Isolierte Fraktur des Processus coracoideus bei einem 14-jährigen Wasserballnationalspieler : Fallbeispiel.

BACKGROUND: Isolated fractures of the coracoid process during sporting activities are very rare. There are a few case studies and retrospective studies with low numbers of cases. OBJECTIVE: Presentation of an initially neglected fracture and conservative treatment. METHODS: Case study of a 14-year-old national water polo player with a non-dislocated fracture of the coracoid process and conservative therapy using focused shockwave therapy. RESULT: Return to sports after conservative therapy was after 13 weeks and return to competitive sport after 14 weeks. CONCLUSION: In cases with therapy refractory shoulder pain after trauma and unremarkable native X­ray, extended 3D imaging by magnetic resonance imaging (MRI) or computed tomography (CT) should be done early. Conservative therapy of a non-dislocated fracture in this case showed a good outcome.

[Tendinopathies of the shoulder and elbow]. / Tendinopathien an Schulter und Ellenbogen.

BACKGROUND: Tendinopathies of the shoulder and elbow joint are a common problem. According to the current state of knowledge tendinopathies can be separated into acute and chronic tendinitis as well as degenerative tendinosis. ORIGIN: The causes of tendinopathy can be intrinsic, extrinsic or a combination of both. A false straining or overuse with repetitive microtrauma is often the cause. Particularly affected are tendons of the rotator cuff, the long biceps tendons and lower arm extensors. TREATMENT: Priority is given to conservative appproaches for these disease processes. Following appropriate diagnostics the pain can be reduced and function can be improved by specific training. When conservative treatment is unsuccessful and in the presence of certain indications, a surgical approach should be considered. In these cases a structural damage of the tendon often already exists, which could have resulted from the tendinopathy. The structural damage must be considered as a separate entity and differentiated from the tendinopathy.

The lasso-loop, lasso-mattress and simple-cinch stitch for arthroscopic rotator cuff repair: are there biomechanical differences?

PURPOSE: Various stitching techniques have been described to facilitate arthroscopic repair of rotator cuff tears. The aim of the present study was to compare the biomechanical properties of the lasso-loop, lasso-mattress and simple-cinch stitch for rotator cuff repair. METHODS: Twelve infraspinatus tendons were harvested from sheep and split in half. The tendons were randomized into three different stitch configuration groups for biomechanical testing: lasso-loop, lasso-mattress and simple-cinch stitch. Each specimen was first cyclically loaded on a universal materials testing machine under force control from 5 to 30 N at 0.25 Hz for twenty cycles. Then, each specimen was loaded to failure under displacement control at a rate of 1 mm/s. Cyclic elongation, peak-to-peak displacement and ultimate tensile load were reported as mean ± standard error and compared using one way analysis of variance. The type of failure was recorded. RESULTS: No differences in cyclic elongation (1.31 ± 0.09 mm for the simple-cinch vs. 1.49 ± 0.07 mm for the lasso-mattress vs. 1.61 ± 0.09 mm for the lasso-loop stitch, p = 0.063) or peak-to-peak displacement (0.58 ± 0.04 mm for the simple-cinch, 0.50 ± 0.03 mm for the lasso-mattress and 0.62 ± 0.06 mm for the lasso-loop stitch, p = 0.141) were seen between all tested stitch configurations. In the load-to-failure test, the simple cinch stitch (149.38 ± 11.89 N) and the lasso-mattress (149.38 ± 10.33 N) stitch demonstrated significantly higher ultimate load than the lasso-loop stitch (65.88 ± 4.75 N, p < 0.001). All stitch configurations failed with suture pull out. CONCLUSIONS: The lasso-mattress and the simple-cinch stitch showed similar biomechanical properties with significant higher tensile loads needed for failure than the lasso-loop stitch.

Case Report of a Traumatic Atlantoaxial Rotatory Subluxation with Bilateral Locked Cervical Facets: Management, Treatment, and Outcome.

The aim was to report a rare case of isolated traumatic atlantoaxial rotatory subluxation without ligamentous injury. Management consisted of analgesia, sedation, and application of a halo skull traction device. After removing halo skull traction, full reduction and recovery were achieved without instability.

Biomechanical evaluation of the simple cinch stitch for arthroscopic rotator cuff repair.

BACKGROUND: The tissue-suture interface is described as the most vulnerable and susceptible area in the muscle-tendon-bone construction of arthroscopic rotator cuff repair. Various stitching techniques have been described to enhance the strength, fixation and stability of the repair, but technical and biomechanical challenges remain. Purpose was to examine the biomechanical properties of the simple cinch stitch in comparison to other stitches commonly used for rotator cuff repair. METHODS: Infraspinatus tendons were harvested from sheep and split in half. The tendons were randomized into five different stitch configuration groups for biomechanical testing: simple stitch; horizontal stitch; FiberChain®; simple cinch stitch; and modified Mason-Allen stitch. Each specimen was first cyclically loaded on a universal materials testing machine under force control from 5 to 30N at 0.25Hz for twenty cycles. Then, each specimen was loaded to failure under displacement control at a rate of 1mm/s. Cyclic elongation, peak-to-peak displacement and ultimate tensile load were measured. The type of failure was recorded. FINDINGS: No differences in cyclic elongation or peak-to-peak displacement were seen between stitch configurations. In the load-to-failure test, the simple cinch stitch demonstrated significantly higher ultimate load than the simple and the horizontal stitch configurations. The comparison to the FiberChain® Suture revealed no statistical significant differences. The FiberChain® Suture demonstrated significantly higher ultimate load than the simple stitch. No statistical significance could be demonstrated in comparison to the horizontal stitch or the simple cinch stitch. The ultimate tensile load of the modified Mason-Allen stitch was significantly higher than that of the other stitch configurations. INTERPRETATION: The simple cinch stitch has an ultimate tensile load comparable to the FiberChain® suture and is superior to the simple stitch and the horizontal stitch. The major advantage of the simple cinch technique is that it is possible to perform the stitch entirely arthroscopically, without the need to perforate the tissue a second time or to use special suture materials. STUDY DESIGN: Controlled laboratory study.

The Anatomic Basis for the Arthroscopic Latarjet Procedure: A Cadaveric Study.

BACKGROUND: The Latarjet technique is a reliable treatment option for recurrent anterior shoulder instability. However, the complication rate has been reported to be as high as 30%, with 1.6% of patients suffering a nerve injury. The all-arthroscopic Latarjet procedure has been gaining popularity, even as it has introduced its own challenges. Given that the surgeon is not able to palpate the nerves, their localization and protection can be difficult. Additionally, the use of different instruments can lead to distinct nerve injury mechanisms. PURPOSE: To describe the anatomic trajectory of the musculocutaneous, axillary, and suprascapular nerves in relation to the arthroscopic Latarjet approach. Using this information, guidance is provided for reducing nerve injuries during instrumentation and screw insertion. STUDY DESIGN: Descriptive laboratory study. METHODS: A total of 50 cadaveric shoulders from 25 whole-body specimens were examined. The specimens were placed in the beach-chair position, and the deltopectoral and dorsal approaches were used to expose the relevant structures. A subscapularis muscle split was performed between the inferior and middle thirds of the tendon. Digital caliper measurements were taken between various points of the trajectories of the nerves and surrounding anatomic landmarks. The location of the nerves relative to the split was recorded. RESULTS: The musculocutaneous nerve lay within the split in 66% of the shoulders (n = 33); it was medial to the split in 28% (n = 14); it was found lateral to split in 2% (n = 1); and it was not identified in 4% of shoulders (n = 2). The mean length of the axillary nerve was 4.0 cm (95% CI, 3.7-4.2) from the exit of the plexus to the quadrangular space. The axillary nerve was found to be within the split in 50% of the shoulders (n = 25) and medial to the split in the remaining 50% (n = 25). The suprascapular nerve at the level of the supraspinatous fossa passed 3.3 cm (95% CI, 3.1-3.5) medial to the superior rim of the posterior glenoid. The nerve curves around the root of the spine at the spinoglenoid notch level, approximating the glenoid rim to a distance of 2.1 cm (95% CI, 2.0-2.2). Finally, the nerve runs medially again before branching out into smaller fibers to innervate the infraspinatus muscle at a distance of 2.9 cm (95% CI, 2.7-3.1) from the inferior glenoid rim. Based on these findings, there is an approximately 2 cm-wide safe zone from the edge of the glenoid rim for the insertion of graft-fixing screws. CONCLUSION: When performing a subscapularis split in the arthroscopic Latarjet procedure, the risk of injuries to the musculocutaneous and axillary nerves could be reduced by aiming the switching stick inserted through the posterior portal toward the lateral edge of the intended location of the split. Injuries to the suprascapular nerve could be prevented by aiming the graft-fixing screws laterally toward the edge of the glenoid rim. CLINICAL RELEVANCE: This study clarifies the location of the nerves relevant to the arthroscopic Latarjet technique and provides anatomic information that could help the surgeon reduce the risk of injuries to the musculocutaneous, axillary, and suprascapular nerves.

The Simple Cow Hitch Stitch Technique for Arthroscopic Rotator Cuff Repair and Stabilization Using Knotless Suture Anchors.

The tissue-suture interface is the most vulnerable and challenging part of adequate restoration and fixation in rotator cuff repair. We describe a simple stitch technique for arthroscopic rotator cuff repair using knotless suture anchors based on the cow hitch. The simple cow hitch stitch technique is easy to perform, especially under difficult conditions, and provides excellent initial fixation strength as required for integration of the reinserted cuff and for shoulder stabilization.

Intraoperative imaging of the shoulder: A comparison of two- and three-dimensional imaging techniques.

BACKGROUND: Isocentric three-dimensional C-arms allow for more effective intraoperative fracture reduction control compared to two-dimensional imaging techniques. However, this design is not appropriate for shoulder scanning. OBJECTIVE: To assess the feasibility of using a newer generation variable isocentric flat detector 3D C-arm for intraoperative glenohumeral and acromioclavicular joint assessment and to compare the accuracy of its intraoperative 3D imaging technology to a standard two-dimensional (2D) flat detector fluoroscope. METHODS: Five whole-body human cadavers were used (ten shoulders). Native shoulder scans were obtained. A glenohumeral arthrotomy was performed and several injuries and procedures were simulated. Five independent orthopaedic surgeons reviewed each scan and filled out a questionnaire assessing the quality of the images using a visual analog scale (VAS) and a points scoring system. RESULTS: The examiners rated the 3D images as very-good-to-excellent according to the established parameters: image quality; visualization of the corticalis and the spongiosa; delineation of the joint surface; presence of artifacts; and clinical assessment capability. This high quality of the images led to a higher interobserver reliability for 3D images compared to 2D images. CONCLUSIONS: Variable isocentric 3D C-arm technology is feasible for intraoperative assessment of shoulder procedures. Assessment of 3D images in shoulder procedures showed better interexaminer reliability in this experiment compared to 2D images. With the aid of intraoperative 3D shoulder imaging, intraoperative 3D C-arm navigation could help improve accuracy in the clinical setting.

Conversion of hemi into reverse shoulder arthroplasty: implant design limitations.

PURPOSE: Cranial migration of shoulder hemiarthroplasties due to rotator cuff insufficiency typically requires conversion into a reverse total shoulder arthroplasty. This study was conducted to analyze differences between the height and offset of six implants designed to enable conversion of a hemiarthroplasty into a reverse system. METHODS: Anteroposterior radiographs of 40 shoulders were taken. An image analyzing software was used to simulate the implantation of the hemiprostheses. Then the implant was dissembled, leaving on the stem within the humeral shaft. Finally, the implantation of a reverse system was simulated using the stem in the same position. Values are reported as ∆-height and ∆-offset ± standard deviation. Significance was assumed for P < 0.05. RESULTS: The least decrease in height was determined for Implantcast with 11.6 ± 3.3 mm, followed by DePuy (16 ± 5.7 mm) and the greatest for Tornier with 33 ± 5.3 mm. No significant differences were found among Exactech, Mathys and Zimmer. The largest offset-deviation was calculated for DePuy (-21.7 ± 3.7 mm) and the smallest for Implantcast (-3.3 ± 2.8 mm) and Tornier (1.5 ± 5.7 mm). CONCLUSIONS: Due to the modular stem, the system of Implantcast can be converted in a reverse system with the least changes in height and offset. For the other manufacturers it does not seem possible to convert a hemiprosthesis to a reversed prosthesis without accepting additional tension of the deltoid muscle. Further experimental studies have to analyze the changes in deltoid abduction moments after conversion of a hemi- into a reversed prosthesis.

A cadaver study comparing intraoperative methods to analyze lower limb alignment.

BACKGROUND: Conventional intraoperative determination of lower limb alignment is essential for orthopedic surgical treatment. Current methods include the cable, alignment rod, and axis board methods. QUESTION/PURPOSES: Are there differences in accuracy and reliability? What are the individual differences in applicability and radiation exposure? METHODS: Twenty legs from 12 fresh-frozen cadavers were randomly selected. After fixation of the legs, measurements were performed using the cable, alignment rod, and axis board methods. Afterwards, all cadavers were subjected to CT scanning. Intersection of the mechanical leg axis with the tibia plateau was calculated as the percentage of the tibia plateau, beginning at the medial border (0%) and ending at the lateral border (100%). Results are presented as mean ± standard deviation (SD). RESULTS: Compared with CT measurements, differences of the intersection at the tibia plateau were 3.9 ± 8.5% with the cable method, 3.6 ± 7.6% using the alignment rod, and 3.6 ± 9.6% using the axis board. The difference among all measurements was not statistically significant (p = 0.450). The average intersection of the mechanical axis was 43.95 ± 5.15% using the cable method, 43.93 ± 5.49% using the alignment rod, and 43.77 ± 5.92% using the axis board. CT measurements revealed an average intersection of 42.46 ± 5.22%. There was no statistically significant difference among conventional results (p = 0.976). We demonstrated good intraobserver reliability for all three methods (cable method, ICC = 0.97; alignment rod, ICC = 0.95; and axis board, ICC = 0.96). There were no statistically significant differences regarding radiation time (p = 0.349) or dose area product (p = 0.823). CONCLUSIONS: All described measurements demonstrated valid measurement of lower limb alignment. With minimal effort, all three methods present a practical and uncomplicated way to control the mechanical axis.

Laser method for intraoperative evaluation of lower extremity alignment: comparison of a novel technique to CT and a conventional method.

INTRODUCTION: Accurate restoration of mechanical alignment is an important factor in reconstructive surgery of the lower extremity. Conventional intraoperative methods, such as using an electrocautery cable, provide only a momentary evaluation of alignment. In this study, we evaluated a novel technique using a laser emitter, which projected the mechanical axis of the lower extremity, providing continuous intraoperative information on alignment. MATERIALS AND METHODS: Alignment of 16 cadaver lower extremities was measured using the electrocautery cable method, the laser method, and CT scan as the standard measurement. The mechanical axis was defined by a line from the center of the femoral head to the center of the ankle. For simplifying measurements the intersection with the tibial plateau was divided into percentages from the medial border (0 %) to the lateral border (100 %). For using the laser method a laser emitting and laser catching device was developed, which is positioned and centered on the femoral head and the ankle using an image intensifier. By catching the laser on the knee region the actual mechanical axis is marked. RESULTS: The data demonstrated good correlation of the laser method when compared to the cable method (P = 0.44). Comparison of the average mechanical axis between cable method and CT (P = 0.819) and laser method and CT (P = 0.647) did not show a statistically significant difference. Average radiation time in comparison between cable method and laser method showed a statistically significant difference (P = 0.013), with the laser method requiring more radiation time. CONCLUSION: Determination of the mechanical axis during surgery remains a difficult clinical problem. Restoration of alignment is an important prognostic factor for surgical outcome. Based on these data, the laser method represents a simple, yet effective tool for continuous intraoperative evaluation of lower extremity alignment.

3D navigated implantation of the glenoid component in reversed shoulder arthroplasty. Feasibility and results in an anatomic study.

BACKGROUND: Reversed shoulder arthroplasty is an alternative to total shoulder arthroplasty for various indications. The long-term results depend on stable bone fixation, and correct positioning of the glenoid component. The potential contribution of image guidance for reversed shoulder arthroplasty procedures was tested in vitro. MATERIAL AND METHODS: 27 positioning procedures (15 navigated, 12 non-navigated) of the glenoid baseplate in reverse shoulder arthroplasty were performed by a single experienced orthopaedic surgeon. A Kirschner wire was placed freehand or with the use of a navigated drill guide. For the navigated procedures, a flat detector 3D C-arm with navigation system was used. The Kirschner wire was to be inserted 12 mm from the inferior glenoid, with an inferior tilt of 10° and centrally in the axial scapular axis. The insertion point in the glenoid as well as the position of the K-wire in the axial and sagittal planes were measured. For statistical analysis, t-tests were performed with a significance level of 0.05. RESULTS: The inferior glenoid drilling distance was 14.1 ± 3.4 mm for conventional placement and 15.1 ± 3.4 mm for the navigated procedure (P = 0.19). The inferior tilt showed no significant difference between the two methods (conventional 7.4 ± 5.2°, navigated 7.7 ± 4.9°, P = 0.63). The glenoid version in the axial plane showed significantly higher accuracy for the navigated procedure, with a mean deviation of 1.6 ±4.5° for the navigated procedure compared with 11.5 ± 6.5° for the conventional procedure(P = 0.004). CONCLUSION: Accurate positioning of the glenoidal baseplate in the axial scapular plane can be improved using 3D C-arm navigation for reversed shoulder arthroplasty. However, computer navigation may not improve the inferior tilt of the component or the position in the inferior glenoid to avoid scapular notching. Nevertheless, further studies are required to confirm these findings in the clinical setup.

Navigated vs arthroscopic-guided drilling for reconstruction of acromioclavicular joint injuries: accuracy and feasibility.

BACKGROUND: Anatomical reconstruction of the coracoclavicular ligaments is a relatively new technique for acromioclavicular (AC) joint injuries. METHODS: Eighteen procedures (nine non-navigated, nine navigated) of anatomical reconstruction were performed minimally invasively, using the Tight Rope system, on cadaveric shoulders. Two Kirschner wires were placed, freehand under fluoroscopic control (non-navigated) or 3D C-arm navigated. The insertion point on the clavicle as well as the position of the K-wire in the coracoid were measured in the axial and coronal planes; points were assigned for different zones. For statistical analysis, the significance level was set to p = 0.05. RESULTS: The accuracy of the entry point in the clavicle was significantly more accurate for the conoidal (p = 0.022) and trapezoidal ( p = 0.0062) drillings. The positioning in the coronal (p = 0.037) and axial (p = 0.0416) planes also showed higher accuracy for the navigated procedures. CONCLUSION: The accuracy of anatomical AC joint reconstruction can be improved using 3D C-arm flat detector navigation.

Navigated versus conventional transfixation of AC joint injuries: feasibility and accuracy.

OBJECTIVE: Transfixation of the acromioclavicular (AC) joint is a well-established technique for treating Rockwood IV to VI lesions. However, several complications, including pin breakage or pin migration due to incorrect placement, have been reported in the literature. A cadaveric study was performed to investigate whether the use of 3D navigation might improve the accuracy of AC joint transfixation. METHODS: Seventeen transfixations of the AC joint (8 non-navigated, 9 navigated) were performed minimally invasively in cadaveric shoulders. For the navigated procedures, a 3D C-arm (Ziehm Vision FD Vario 3D) and a navigation system (BrainLab VectorVision) were used. Reference markers were attached to the spina scapulae, then a 3D scan was performed and the data transferred to the navigation system. Two Kirschner wires (K-wires) were placed either freehand under fluoroscopic control (in the non-navigated group) or with the use of a navigated drill guide. Radiological analysis was performed with OsiriX software, measuring the distance of the K-wires from the center of the AC joint. For statistical analysis, Student's t-test was performed, with the significance level being set to p < 0.05. RESULTS: The maximum distance of the K-wires from the center of the AC joint was 5.4 ± 1.1 mm for the freehand non-navigated group and 3.1 ± 1.6 mm for the navigated group (p = 0.0054). The minimum distance of the K-wires from the AC joint center was 3.0 ± 0.6 mm for the freehand group and 1.6 ± 0.6 mm for the navigated group (p = 0.0002). The radiation time was significant lower for the freehand group (41.25 ± 20.4 seconds versus 79.5 ± 13.3 seconds for the navigated group, p = 0.004). There was no statistical difference between the groups with respect to the time required for surgery (11.25 ± 3.6 min for the freehand group and 12.6 ± 4.6 min for the navigated group; p = 0.475). In the freehand group, the AC joint was penetrated by both K-wires in 87.5% of the procedures, compared to 100% in the navigated group. Both K-wires were placed completely intraosseously in the clavicula in 50% of the procedures in the freehand group, compared to 88% in the navigated group. CONCLUSION: Three-dimensional navigation may improve the accuracy of AC joint transfixation techniques. However, the radiation time is increased when using the navigated procedure, while the overall operation time remains comparable. Nevertheless, a 3D C-arm with a variable isocentric design is recommended for the acquisition of the shoulder scans.

Arthroscopic arthrolysis for recalcitrant frozen shoulder: a lateral approach.

PURPOSE: The purpose of this study was to evaluate a new all-arthroscopic technique in the management of recalcitrant globally stiff frozen shoulders. This adopts an initial extra-articular approach followed by intra-articular entry to perform a 360° capsular release. METHODS: Ten patients with global adhesive capsulitis were prospectively evaluated. All patients had not improved after undergoing a minimum of 6 months of physiotherapy, and 5 received intra-articular injections of steroids. The mean age was 47 years (range, 33 to 56 years). Patients were examined preoperatively and postoperatively for range of motion. A Constant score and visual analog scale score for pain were recorded. We described an all-arthroscopic technique by entering the subacromial space laterally and opening the rotator interval from the outside in, followed by a complete 360° capsular release and biceps tenotomy. RESULTS: The mean follow-up was 42 months (range, 18 to 90 months), and the mean Constant score improved from 21 to 72 (P < .01). Preoperative abduction improved from a mean of 40° to 165°, elevation improved from 55° to 175°, and external rotation improved from 6° to 58°. The visual analog scale pain score improved from 7 to 1.6, and all patients reported an excellent outcome after surgery. There were no complications particularly regarding axillary nerve injury, fracture, or infection. CONCLUSIONS: This study shows a combined extra-articular and intra-articular approach that is controlled and anatomic and achieves excellent results that were maintained at the midterm. The technique permits anatomic debridement of the rotator interval, enabling excellent intra-articular access, a circumferential capsular release, and biceps tenotomy. There were no complications, and no manipulations were required, which pose a risk of creating soft-tissue lesions, fractures, or dislocations. We recommend this 360° capsular release technique for releasing globally stiff shoulders where the surgeon is experienced in arthroscopy.