RESUMO
X-ray diagnostics are key instruments for understanding the physics behind inertial confinement fusion experiments. We report on the multilayer design optimization for the Toroidal X-ray Imager (TXI), a hard x-rays microscope instrument designed by Commissariat à l'énergie atomique (CEA) and Laboratoire Charles Fabry (LCF) to be installed on the National Ignition Facility. TXI includes six channels designed for three different energy bands centered on 8.7, 13, and 17.5 keV. Each channel is made up of two toroidal mirrors arranged in a Wolter-like configuration. The required field of view is 800 × 400 µm2, and the resolution should be better than 5 µm. In addition, we seek to estimate the spatial distribution of the temperature, which requires no spectral overlap of the different energy bands and a good spectral homogeneity of the image produced. The development of the multilayer coatings was performed in a two-step method. First, the coatings were optimized to obtain proper energy bands. Then, an x-ray tracing code was used to calculate the integrated optical response of each channel and adjust the response of the mirror to fulfill the requirements. To fulfill all the specifications, we propose an original design using a combination of two aperiodic coatings, one with a narrow bandwidth and the other one with a larger bandwidth.
RESUMO
We present an experimental comparison of several Sc-based short period multilayer mirrors including Cr/Sc with B4C barrier layers and CrNx/Sc, and we propose a new material combination that provides high reflectance in the water window domain. Multilayer samples with period thickness in the range 1.5-1.7 nm have been deposited by magnetron sputtering and characterized by x-ray reflectometry with a Cu-Kα source and with synchrotron radiation near the Sc-L2,3 edge. Best results are achieved by combining the nitridation of Cr layers and the addition of B4C barrier layers. Near normal incidence reflectance as high as 23% has been measured at photon energy of 397 eV. A simulation model of the multilayer structure is proposed and it predicts that reflectance higher than 32% is achievable with CrNx/B4C/Sc mirrors.
RESUMO
We present an experimental study and performance improvement of periodic and aperiodic Ni/SiC multilayer coatings. Periodic Ni/SiC multilayer mirrors have been coated and characterized by grazing incidence X-ray reflectometry at 8.048 keV (Cu Kα radiation) and by measurements at 3 keV and 5 keV on synchrotron radiation facilities. An interdiffusion effect is found between Ni and SiC layers. A two-material model, Ni(x)Si(y)/SiC, using a silicide instead of Ni, was used to fit the measurements. The addition of 0.6 nm W barrier layers at the interfaces allows a significant reduction of the interdiffusion between Ni and SiC. In order to obtain a specific reflectivity profile in the 2 - 8 keV energy range, we have designed and coated aperiodic multilayer mirrors by using Ni/SiC with and without W barrier layers. The experimental reflectivity profiles as a function of the photon energy were measured on a synchrotron radiation facility in both cases. Adding W barrier layers in Ni/SiC multilayers provides a better precision on the layer thicknesses and a very good agreement between the experimental data and the targeted spectral profile.
Assuntos
Compostos Inorgânicos de Carbono/química , Níquel/química , Fenômenos Ópticos , Compostos de Silício/química , Tungstênio/química , Modelos Teóricos , Raios XRESUMO
We report on the advanced amplitude and phase control of attosecond radiation allowed by specifically-designed multilayer XUV mirrors. We first demonstrate that such mirrors can compensate for the intrinsic chirp of the attosecond emission over a large bandwidth of more than 20 eV. We then show that their combination with metallic foils introduces a third-order dispersion that is adjustable through the mirror's incidence angle. This results in a controllable beating allowing the radiation to be shaped from a single to a series of sub-100 as pulses.