RESUMO
Estimates suggest billions of dollars are lost annually in the US due to fuel tax fraud. One method of fuel fraud is called "cocktailing" and involves blending products that are non-taxed, lower value, taxed at a lower rate, or unwanted/less-refined petroleum to diesel fuels. The goal of this study was to investigate compound specific isotope analysis (CSIA) using isotope ratio mass spectrometry (IRMS) for small aromatics contained in diesel fuel to determine whether this approach could be used to identify cocktailing and potentially fingerprint possible sources. However, the high chemical complexity of diesel fuels complicates CSIA owing to the need to fully separate individual compounds for effective isotope analysis. Therefore, different methods were investigated to selectively isolate aromatics for CSIA and evaluate these methods for isotopic fractionation. Analyses indicate that there is enough variability in isotopic ratios (δ2H and δ13C) between toluene samples obtained from different sources to use CSIA to differentiate/identify the origin of potential fuel adulterants. Three isolation methods were identified that provided sufficiently pure aromatic fractions for CSIA: selective solvent extraction, ionic liquid coated solid phase microextraction (SPME), and a combination of the two. However, due to the labor-intensive nature of selective solvent extraction, ionic liquid coated SPME represents the best method to quickly isolate aromatics from diesel fuel, without sacrificing selectivity or sensitivity. All methods tested can result in isotopic fractionation, but this can be compensated for by applying a correction factor. Furthermore, the chemical composition of a sample appeared to be important in the degree to which fractionation occurred during isolation. While the tested approaches for aromatic extraction from diesel showed promise, additional studies are required to refine and validate the methods prior to routine use in fuel cocktailing investigations.
Assuntos
Gasolina , Líquidos Iônicos , Isótopos de Carbono/análise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Gasolina/análise , Líquidos Iônicos/análise , Isótopos/análise , Microextração em Fase SólidaRESUMO
Resuscitation and detection of stressed total coliforms in chlorinated water samples is needed to assess and prevent health effects from adverse exposure. In this study, we report that the addition of a growth enhancer mix consisting of trehalose, sodium pyruvate, magnesium chloride, and 1× trace mineral supplement improved growth of microorganisms from chlorinated secondary effluent in the base medium with Colilert-18. Improving growth of chlorine stressed microorganisms from secondary effluent is crucial to decreased detection time from 18 to 8 h.
Assuntos
Carga Bacteriana/métodos , Cloro/toxicidade , Meios de Cultura/química , Monitoramento Ambiental/métodos , Escherichia coli/crescimento & desenvolvimento , Esgotos/microbiologia , Fluoretação , Cloreto de Magnésio/metabolismo , Piruvatos/metabolismo , Trealose/metabolismo , Microbiologia da ÁguaRESUMO
Robust and highly specific methods for the detection of the protein toxin ricin are of interest to the law enforcement community. In previous studies, methods based on liquid chromatography-tandem mass spectrometry shotgun proteomics have been proposed. The successful implementation of this approach relies on specific data evaluation criteria addressing (1) the quality of the mass spectrometric data, (2) the confidence of peptide identifications (peptide-spectrum matches), and (3) the number and sequence specificity of peptides detected. We present such data evaluation criteria and use a novel approach to establish the limit of detection for this ricin assay. Specifically, we use logistic regression to determine the probability of detection for individual ricin peptides at different concentrations. We then apply basic rules from probability theory, combining these individual peptide probabilities into an overall assay limit of detection. This procedure yields an assay limit of detection for ricin at 42.5 ng on column or 21.25 ng/µL for a 2-µL injection. We also show that, despite the conventional wisdom that detergents are deleterious to mass spectrometric analyses, the presence of Tween-20 did not prevent detection of ricin peptides, and indeed assays performed in buffers that included Tween-20 gave better results than assays performed using other buffer formulations with or without detergent removal.
Assuntos
Limite de Detecção , Proteômica/métodos , Ricina/análise , Sequência de Aminoácidos , Polissorbatos/química , Ricina/química , Ricina/metabolismoRESUMO
The toxic protein ricin (also known as RCA60), found in the seed of the castor plant (Ricinus communis) is frequently encountered in law enforcement investigations. The ability to detect ricin by analyzing its proteolytic (tryptic) peptides by liquid chromatography-tandem mass spectrometry (LC-MS/MS) is well established. However, ricin is just one member of a family of proteins in R. communis with closely related amino acid sequences, including R. communis agglutinin I (RCA120) and other ricin-like proteins (RLPs). Inferring the presence of ricin from its constituent peptides requires an understanding of the specificity, or uniqueness to ricin, of each peptide. Here we describe the set of ricin-derived tryptic peptides that can serve to uniquely identify ricin in distinction to closely-related RLPs and to proteins from other species. Other ricin-derived peptide sequences occur only in the castor plant, and still others are shared with unrelated species. We also characterized the occurrence and relative abundance of ricin and related proteins in an assortment of forensically relevant crude castor seed preparations. We find that whereas ricin and RCA120 are abundant in castor seed extracts, other RLPs are not represented by abundant unique peptides. Therefore, the detection of peptides shared between ricin and RLPs (other than RCA120) in crude castor seed extracts most likely reflects the presence of ricin in the sample.
Assuntos
Substâncias para a Guerra Química/análise , Ricina/análise , Ricinus communis/química , Sequência de Aminoácidos , Substâncias para a Guerra Química/química , Cromatografia Líquida , Peptídeos/análise , Extratos Vegetais/química , Proteínas de Plantas/análise , Ricina/química , Sementes/química , Espectrometria de Massas em TandemRESUMO
There is little published data on the performance of biological indicator tests and immunoassays that could be used by first responders to determine if a suspicious powder contains a potential biothreat agent. We evaluated a range of biological indicator tests, including 3 protein tests, 2 ATP tests, 1 DNA test, and 1 FTIR spectroscopy instrument for their ability to screen suspicious powders for Bacillus anthracis (B. anthracis) spores and ricin. We also evaluated 12 immunoassays (mostly lateral flow immunoassays) for their ability to screen for B. anthracis and ricin. We used a cost-effective, statistically based test plan that allows instruments to be evaluated at performance levels ranging from 0.85 to 0.95 lower confidence bound of the probability of detection at confidence levels of 80% to 95%. We also assessed interference with 22 common suspicious powders encountered in the field. The detection reproducibility for the biological indicators was evaluated at 108 B. anthracis spores and 62.5 µg ricin, and the immunoassay detection reproducibility was evaluated at 107 spores/mL (B. anthracis) and 0.1 µg/mL (ricin). Seven out of 12 immunoassays met our most stringent criteria for B. anthracis detection, while 9 out of 12 met our most stringent test criteria for ricin detection. Most of the immunoassays also detected ricin in 3 different crude castor seed preparations. Our testing results varied across products and sample preparations, indicating the importance of reviewing performance data for specific instruments and sample types of interest for the application in order to make informed decisions regarding the selection of biodetection equipment for field use.
Assuntos
Bacillus anthracis , Imunoensaio/métodos , Ricina , Manejo de Espécimes , Pós , Reprodutibilidade dos Testes , Esporos Bacterianos/isolamento & purificaçãoRESUMO
The bacterial pathogen Yersinia pestis, the cause of plague in humans and animals, normally has a sylvatic lifestyle, cycling between fleas and mammals. In contrast, laboratory-grown Y. pestis experiences a more constant environment and conditions that it would not normally encounter. The transition from the natural environment to the laboratory results in a vastly different set of selective pressures, and represents what could be considered domestication. Understanding the kinds of adaptations Y. pestis undergoes as it becomes domesticated will contribute to understanding the basic biology of this important pathogen. In this study, we performed a parallel serial passage experiment (PSPE) to explore the mechanisms by which Y. pestis adapts to laboratory conditions, hypothesizing that cells would undergo significant changes in virulence and nutrient acquisition systems. Two wild strains were serially passaged in 12 independent populations each for ~750 generations, after which each population was analyzed using whole-genome sequencing, LC-MS/MS proteomic analysis, and GC/MS metabolomics. We observed considerable parallel evolution in the endpoint populations, detecting multiple independent mutations in ail, pepA, and zwf, suggesting that specific selective pressures are shaping evolutionary responses. Complementary LC-MS/MS proteomic data provide physiological context to the observed mutations, and reveal regulatory changes not necessarily associated with specific mutations, including changes in amino acid metabolism and cell envelope biogenesis. Proteomic data support hypotheses generated by genomic data in addition to suggesting future mechanistic studies, indicating that future whole-genome sequencing studies be designed to leverage proteomics as a critical complement.
Assuntos
Adaptação Fisiológica/genética , Genômica , Proteômica , Yersinia pestis/genética , Animais , Sequenciamento de Nucleotídeos em Larga Escala , Humanos , Laboratórios , Dados de Sequência Molecular , Peste/microbiologia , Yersinia pestis/patogenicidadeRESUMO
The investigation of crimes involving chemical or biological agents is infrequent, but presents unique analytical challenges. The protein toxin ricin is encountered more frequently than other agents and is found in the seeds of Ricinus communis, commonly known as the castor plant. Typically, the toxin is extracted from castor seeds utilizing a variety of different recipes that result in varying purity of the toxin. Moreover, these various purification steps can also leave or differentially remove a variety of exogenous and endogenous residual components with the toxin that may indicate the type and number of purification steps involved. We have applied three gas chromatography-mass spectrometry (GC-MS) based analytical methods to measure the variation in seed carbohydrates and castor oil ricinoleic acid, as well as the presence of solvents used for purification. These methods were applied to the same samples prepared using four previously identified toxin preparation methods, starting from four varieties of castor seeds. The individual data sets for seed carbohydrate profiles, ricinoleic acid, or acetone amount each provided information capable of differentiating different types of toxin preparations across seed types. However, the integration of the data sets using multivariate factor analysis provided a clear distinction of all samples based on the preparation method, independent of the seed source. In particular, the abundance of mannose, arabinose, fucose, ricinoleic acid, and acetone were shown to be important differentiating factors. These complementary tools provide a more confident determination of the method of toxin preparation than would be possible using a single analytical method.
Assuntos
Métodos Analíticos de Preparação de Amostras/métodos , Cromatografia Gasosa-Espectrometria de Massas/métodos , Ricina/análise , Integração de Sistemas , Acetona/análise , Acetona/química , Concentração de Íons de Hidrogênio , Monossacarídeos/análise , Monossacarídeos/química , Análise Multivariada , Ricina/química , Ricina/isolamento & purificação , Ácidos Ricinoleicos/análise , Ácidos Ricinoleicos/química , Ricinus/química , Ricinus/enzimologia , Sementes/química , Sementes/enzimologiaRESUMO
Biological materials generally require stabilization to retain activity or viability in a dry form. A number of industrial products, such as vaccines, probiotics and biopesticides have been produced as dry preparations. The same methods and materials used for stabilizing commercial microbial products may be applicable to preserving biothreat pathogens in a dry form. This is a likely step that may be encountered when looking at samples from terrorism attempts since only spores, such as those from Bacillus anthracis, are inherently stable when dried. The stabilizers for microbial preparations generally include one or more small carbohydrates. Different formulations have been reported for different industrial products and are often determined empirically. However sugar alcohols (mannitol and sorbitol) and disaccharides (lactose, sucrose and trehalose) are the common constituents of these formulations. We have developed an analytical method for sample preparation and detection of these simple carbohydrates using two complementary analytical tools, MALDI-MS and GC-MS. The native carbohydrates and other constituents of the formulation are detected by MALDI-MS as a screening tool. A longer and more detailed analysis is then used to specifically identify the carbohydrates by derivatization and GC-MS detection. Both techniques were tested against ten different types of stabilization recipes with Yersinia pestis cell mass cultured on different media types used as the biological component. A number of additional components were included in these formulations including proteins and peptides from serum or milk, polymers (e.g. poly vinyl pyrrolidone - PVP) and detergents (e.g. Tween). The combined method was characterized to determine several figures of merit. The accuracy of the method was 98% for MALDI-MS and 100% for GC-MS. The repeatability for detection of carbohydrates by MALDI-MS was determined to be 96%. The repeatability of compound identification by GC-MS was determined by monitoring variation in retention time, which is vital for identification of isomeric carbohydrates. The figures of merit illustrate an effective and accurate method for mono and disaccharide detection independent of formulation. This meets our primary goal for method development as small carbohydrates are among the most common stabilizers employed.
RESUMO
The expressed characteristics of biothreat agents may be impacted by variations in the culture environment, including growth medium formulation. The carbohydrate composition of B. anthracis spores has been well studied, particularly for the exosporium, which is the outermost spore structure. The carbohydrate composition of the exosporium has been demonstrated to be distinct from the vegetative form containing unique monosaccharides. We have investigated the carbohydrate composition of B. anthracis Sterne spores produced using four different medium types formulated with different sources of medium components. The amount of rhamnose, 3-O-methyl rhamnose and galactosamine was found to vary significantly between spores cultured using different medium formulations. The relative abundance of these monosaccharides compared to other monosaccharides such as mannosamine was also found to vary with medium type. Specific medium components were also found to impact the carbohydrate profile. Xylose has not been previously described in B. anthracis spores but was detected at low levels in two media. This may represent residual material from the brewery yeast extract used to formulate these two media. These results illustrate the utility of this method to capture the impact of growth medium on carbohydrate variation in spores. Detecting carbohydrate profiles in B. anthracis evidentiary material may provide useful forensic information on the growth medium used for sporulation.
Assuntos
Bacillus anthracis/química , Carboidratos/análise , Meios de Cultura/química , Esporos Bacterianos/química , Cromatografia Gasosa-Espectrometria de MassasRESUMO
One challenge in the forensic analysis of ricin samples is determining the method and extent of sample preparation. Ricin purification from the source castor seeds is essentially a protein purification through removal of the nonprotein fractions of the seed. Two major, nonprotein constituents in the seed are the castor oil and carbohydrates. We used derivatization of carbohydrate and fatty acid markers followed by identification and quantification using gas chromatography/mass spectrometry (GC/MS) to assess compositional changes in ricin samples purified by different methods. The loss of ricinoleic acid indicated steps for oil removal had occurred, and a large decrease of ricinoleic acid was observed between unextracted mash and solvent extracted and protein precipitate preparations. Changes to the carbohydrate content of the sample were also observed following protein precipitation. The differential loss of arabinose relative to mannose was observed indicating the removal of the major carbohydrate fraction of the seed and enrichment of the protein content. When the data is combined and multivariate principle component analysis is applied, these changes in fatty acid and carbohydrate abundance are discriminating enough to be indicative of the preparation method used for each sample.
Assuntos
Carboidratos/análise , Substâncias para a Guerra Química/química , Ácidos Graxos/análise , Cromatografia Gasosa-Espectrometria de Massas/métodos , Ricina/química , Arabinose/química , Toxicologia Forense , Análise de Componente Principal , Ácidos Ricinoleicos/químicaRESUMO
The detection limit of a field chemical sensor under realistic operating conditions is determined by receiver operator characteristic (ROC) curves. The chemical sensor is an ion mobility spectrometry (IMS) device used to detect a chemical marker in diesel fuel. The detection limit is the lowest concentration of the marker in diesel fuel that obtains the desired true-positive probability (TPP) and false-positive probability (FPP). A TPP of 0.90 and a FPP of 0.10 were selected as acceptable levels for the field sensor in this study. The detection limit under realistic operating conditions is found to be between 2 to 4 ppm (w/w). The upper value is the detection limit under challenging conditions. The ROC-based detection limit is very reliable because it is determined from multiple and repetitive sensor analyses under realistic circumstances. ROC curves also clearly illustrate and gauge the effects data preprocessing and sampling environments have on the sensor's detection limit.