Second-Generation Magnesium Phosphates as Water Extractant Agents in Forward Osmosis and Subsequent Use in Hydroponics.

The recovery of nutrients from wastewater streams for their later use in agricultural fertilization is an interesting approach. Wastewater recovered magnesium phosphate (MgP) salts were used in a forward osmosis (FO) system as draw solution in order to extract water and to produce a nutrient solution to be used in a hydroponic system with lettuces (Lactuca sativa, L.). Owing to the low solubility of the MgP salts (i.e., struvite, hazenite and cattiite) in water, acid dissolution was successfully tested using citric and nitric acids to reach pH 3.0. The dilution by FO of the dissolved salts reached levels close to those needed by a hydroponic culture. Ion migration through the membrane was medium to high, and although it did not limit the dilution potential of the system, it might decrease the overall feasibility of the FO process. Functional growth of the lettuces in the hydroponic system was achieved with the three MgP salts using the recovered water as nutrient solution, once properly supplemented with nutrients with the desired concentrations. This is an innovative approach for promoting water reuse in hydroponics that benefits from the use of precipitated MgP salts as a nutrient source.

Exploring the limitations of forward osmosis for direct hydroponic fertigation: Impact of ion transfer and fertilizer composition on effective dilution.

There is a need for water reuse technologies and applications to minimize the imminent water crisis, caused by the world population growth, the reduction of freshwater resources and the increasing water pollution. Fertilizer-drawn forward osmosis (FDFO) is a promising process capable of simultaneously extracting fresh water from low-quality sources as feed water (e.g., wastewater or greywater), while diluting fertilizer solutions for direct fertigation, avoiding the demand for freshwater for irrigation. Achieving an adequate level of dilution for direct fertigation is a key element to be evaluated for the implementation of FDFO. This study assessed the performance of the forward osmosis process to dilute fertilizer solutions to be applied directly in hydroponic systems. Experiments were carried out under conditions close to osmotic equilibrium to evaluate the process performance up to the maximum dilution point. Tests were carried out with individual and blended fertilizers (i.e., (NH4)2HPO4 or DAP, and KNO3) used as draw solution (DS) and with deionized water or individual salts (NaCl, MgCl2, Na2SO4, MgSO4) in the feed solution (FS). Water fluxes and reverse salt fluxes indicated that both fertilizer DS composition and concentrations play a fundamental role in the process. Suitable nutrient concentrations to be directly applied without further dilution for N, P and K (119, 40, 264 mg.L-1 respectively) were obtained with deionized water as FS and blended DAP (0.025 M) and KNO3 (0.15 M) as DS. However, important fertilizer losses from DS to FS were observed, being the highest for NO3- (33-70% losses from DS to FS). The presence of salts in FS decreased the water fluxes and the DS dilution due to the osmotic equilibrium caused by a greater loss of nutrients from DS to FS (up to 100%), compared with tests using just deionized water as FS. This study points out the potential limitations of the FDFO process, due to the high solute fluxes and low water fluxes in conditions close to osmotic equilibrium.

How do WWTPs operational parameters affect the removal rates of EU Watch list compounds?

This work aims at achieving a better understanding of the mechanisms and the operative conditions regulating the removal of a set of relevant micropollutants in conventional activated sludge (CAS) systems to maximize their removal and, if possible, biodegradation. Eight compounds from the EU Watch list (clothianidin, thiacloprid, methiocarb, E1, E2, EE2, diclofenac and erythromycin) were spiked at 2 µg/L in CAS systems and their behaviour was studied in 6-h batch tests. The role of sorption was also investigated. Information on the removal of the pesticides clothianidin, thiacloprid and methiocarb is here presented for the first time to the best of the authors' knowledge. With the aim of enhancing the removal of the selected compounds in wastewater treatment, four parameters were explored: biomass concentration, temperature, pH and redox conditions. For each parameter, a low and a high value were chosen, based on the ranges usually applied in wastewater treatment plants (WWTPs). Results show that biomass concentration is the most relevant parameter among the ones investigated, followed by the redox conditions. The operational conditions that maximized removal rates were: 5 g/L of biomass, aerobic conditions, 25 °C and pH 7.5. High variability in removal rates was observed for compounds such as E1, erythromycin and methiocarb. The pesticides clothianidin and thiacloprid did not prove to be easily degradable. The highest removal rates were recorded for the hormones, particularly E2, with a transformation rate of at least 96% under all conditions. Sorption proved to be a relevant removal route for EE2, for which the highest sorption rates were recorded, and diclofenac, where the adsorption mechanisms was hypothesised for its prevalence at lower pH values.