Comparison of thermal, rheological properties of Finnish Pinus sp. and Brazilian Eucalyptus sp. black liquors and their impact on recovery units.

Black liquor (BL) is the major bioproduct and biomass fuel in pulp mill processes. However, the high viscosity of BL makes it a challenging material to work with, resulting in issues with evaporators and heat exchangers during its transport and processing. The thermal and rheological properties of BLs from Pinus sp. (PBL) and Eucalyptus sp. (EBL) were studied. FTIR spectra revealed the presence of the characteristic functional groups and the chemical composition in liquors. TGA/DTG curves showed three characteristic degradation stages related to evaporation of water, pyrolysis of organic groups, and condensation of char. Rheologically, liquors are classified as non-Newtonian and with comportment pseudoplastic. Their rheological dynamic shear properties included a linear viscoelastic region up to 1% shear strain, while frequency sweeps showed that storage modulus (G') > loss modulus (G''), thus confirming the solid-like behavior of both BLs. The rheological study demonstrated that increasing the temperature and oscillatory deformations of PBL and EBL decreased their degree of viscoelasticity, which could favor their pumping and handling within the pulp mill, as well as the droplet formation and swelling characteristics in the recovery furnace.

Life cycle assessment of alternative pulp mill sludge treatment methods in Finland.

Proper management of wastewater treatment plant side streams in pulp and paper mills is a matter of great interest. This study evaluates the environmental impact of different strategies in the management of biosludge from pulp and paper mills in Finland through a Life Cycle Assessment methodology. The base industrial standard practice, biosludge incineration for energy recovery and ash landfill disposal (Scenario 1), was compared to the alternative process of hydrothermal carbonization. The hydrochar generated from hydrothermal carbonization was evaluated for energy recovery through incineration (Scenario 2), or for use in composting for nutrient recovery (Scenario 3). The results showed that the hydrothermal process improved the overall environmental performance of the sludge management, particularly in terms of energy consumption and greenhouse gas emissions. The use of hydrochar as a soil amendment in composting also resulted in a significant reduction on the environmental impact compared to the other two scenarios. Overall, this study highlights the potential of hydrothermal carbonization and hydrochar utilization as sustainable options for managing biosludge from pulp mills.