Elastic Properties of Low-Dimensional Single-Crystalline Dielectric Oxides through Controlled Large-Area Wrinkle Generation.

Freestanding single-crystalline SrTiO3 membranes, as high-κ dielectrics, hold significant promise as the gate dielectric in two-dimensional (2D) flexible electronics. Nevertheless, the mechanical properties of the SrTiO3 membranes, such as elasticity, remain a critical piece of the puzzle to adequately address the viability of their applications in flexible devices. Here, we report statistical analysis on plane-strain effective Young's modulus of large-area SrTiO3 membranes (5 × 5 mm2) over a series of thicknesses (from 6.5 to 32.2 nm), taking advantage of a highly efficient buckling-based method, which reveals its evident thickness-dependent behavior ranging from 46.01 to 227.17 GPa. Based on microscopic and theoretical results, we elucidate these thickness-dependent behaviors and statistical data deviation with a bilayer model, which consists of a surface layer and a bulk-like layer. The analytical results show that the ∼3.1 nm surface layer has a significant elastic softening compared to the bulk-like layer, while the extracted modulus of the bulk-like layer shows a variation of ∼40 GPa. This variation is considered as a combined contribution from oxygen deficiency presenting in SrTiO3 membranes, and the alignment between applied strain and the crystal orientation. Upon comparison of the extracted elastic properties and electrostatic control capability to those of other typical gate dielectrics, the superior performance of single-crystalline SrTiO3 membranes has been revealed in the context of flexible gate dielectrics, indicating the significant potential of their application in high-performance flexible 2D electronics.

Machine Learning Explains Long-Term Trend and Health Risk of Air Pollution during 2015-2022 in a Coastal City in Eastern China.

Exposure to air pollution is one of the greatest environmental risks for human health. Air pollution level is significantly driven by anthropogenic emissions and meteorological conditions. To protect people from air pollutants, China has implemented clean air actions to reduce anthropogenic emissions, which has led to rapid improvement in air quality over China. Here, we evaluated the impact of anthropogenic emissions and meteorological conditions on trends in air pollutants in a coastal city (Lianyungang) in eastern China from 2015 to 2022 based on a random forest model. The annual mean concentration of observed air pollutants, including fine particles, inhalable particles, sulfur dioxide, nitrogen dioxide, and carbon monoxide, presented significant decreasing trends during 2015-2022, with dominant contributions (55-75%) by anthropogenic emission reduction. An increasing trend in ozone was observed with an important contribution (28%) by anthropogenic emissions. The impact of meteorological conditions on air pollution showed significant seasonality. For instance, the negative impact on aerosol pollution occurred during cold months, while the positive impact was in warm months. Health-risk-based air quality decreased by approximately 40% in 8 years, for which anthropogenic emission made a major contribution (93%).

Curing the fundamental issue of impurity phases in two-step solution-processed CsPbBr3 perovskite films.

Inorganic lead halide perovskite CsPbBr3 offers attractive photophysical properties and phase stability for high-performance optoelectronic devices. However, CsPbBr3 films produced by the classic solution-based two-step method are always accompanied with impurity phases of CsPb2Br5 and Cs4PbBr6, which represents a major efficiency-limiting factor for future advances of CsPbBr3-based devices. The challenge lies in the complexity of the Cs-Pb-Br phase system, requiring both spatially and temporally precise control of the precursor stoichiometry during solution-phase growth of CsPbBr3 films. By adopting 2-methoxyethanol as the solution conversion medium instead of commonly applied methanol, the reaction between CsBr and PbBr2 can be finely controlled to yield single phase CsPbBr3 films within a few minutes; extending the solution-conversion step to 24 h does not alter the phase purity of resulting CsPbBr3 films. The present work paves the way to regulate the crystal growth behaviors of two-step solution-processed CsPbBr3 films by simple solvent engineering.

Reliability and Validity of the Spence Children's Anxiety Scale for Parents in Mainland Chinese Children and Adolescents.

This study examined the psychometric properties of the Spence Children's Anxiety Scale for Parents (SCAS-P) in 1943 father-mother dyads and 1785 students. Results of confirmatory factor analyses for SCAS-P were in favour of the original model with six correlated factors. The internal consistency of SCAS-P was acceptable (α = .63-.91), and the test-retest reliability was acceptable (r = .46-.72). The convergent and divergent validity of SCAS-P was supported by significant correlations with an internalizing subscale to a greater extent than with an externalizing subscale. Congruent validity was supported by significant correlations between father and mother reports (r = .60-.71) and child and parent reports (r = .25-.42). Significant differences between community and clinical samples supported the discriminant validity. Adolescents showed higher anxiety levels than children, and girls showed higher anxiety levels than boys. Our findings suggest that the SCAS-P is a suitable parent instrument to measure child anxiety symptoms in Mainland Chinese children and adolescents.

Resistance Mechanisms and Molecular Docking Studies of Four Novel QoI Fungicides in Peronophythora litchii.

Peronophythora litchii is the causal agent of litchi downy blight. Enestroburin, SYP-1620, SYP-2815 and ZJ0712 are four novel QoI fungicides developed by China. Eight mutants of P. litchii resistant to these QoI fungicides and azoxystrobin (as a known QoI fungicide) were obtained in our preliminary work. In this study, the full length of the cytochrome b gene in P. litchii, which has a full length of 382 amino acids, was cloned from both sensitive isolates and resistant mutants, and single-site mutations G142A, G142S, Y131C, or F128S were found in resistant mutants. Molecular docking was used to predict how the mutations alter the binding of the five QoI fungicides to the Qo-binding pockets. The results have increased our understanding of QoI fungicide-resistance mechanisms and may help in the development of more potent inhibitors against plant diseases in the fields.

Evaluation of fungicides enestroburin and SYP1620 on their inhibitory activities to fungi and oomycetes and systemic translocation in plants.

Enestroburin and SYP1620 are newly developed strobilurin chemicals carrying fungicidal activity and need to be fully characterized in activities of anti-oomycete or anti-fungi, disease prevention and systemic translocation in planta. Their inhibitory activities were examined by amending the chemical in agar media, on which selected plant pathogens were grown and mycelial growth were measured. Effective concentrations for 50% inhibition (EC50) of mycelial growth were calculated to determine the level of fungicide sensitivity of the pathogen. Azoxystrobin was used as control. To examine the prevention and systemic translocation in plants, the fungicides were either sprayed on wheat leaves or dipped on wheat roots, which then were detected using high performance liquid chromatography. All the three fungicides inhibited mycelial growth of Sphacelotheca reiliana, Phytophthora infestans, Peronophythora litchi, and Magnaporthe oryzae, with EC50 values ranging from 0.02 to 2.84µg/ml; EC50 of SYP1620 was significantly lower than that of azoxystrobin and enestroburin on Valsa mali, Gaeumannomyces graminis, Alternaria solani, and Colletotrichun orbiculare. The three QoI fungicides showed strong inhibitory activities on spore germination against the 13 pathogens tested and were highly effective on biotrophic pathogens tested. Enestroburin and SYP1620 penetrated and spread in wheat leaves, but the penetration and translocation levels were lower compared to azoxystrobin. The three fungicides were all rapidly taken up by wheat roots and transported upwards, with greater fungicide concentrations in roots than in stems and leaves. The results indicate that enestroburin and SYP1620 are systemic fungicides that inhibit a broad spectrum of fungi and oomycetes.

Microbial Communities Associated with Potato Common Scab-Suppressive Soil Determined by Pyrosequencing Analyses.

Potato common scab, caused by Streptomyces spp., is an annual production problem for potato growers, and not effectively controlled by current methods. A field with naturally occurring common scab suppression has been identified in Michigan, and confirmed to have a biological basis for this disease suppression. This field and an adjacent scab nursery conducive to disease were studied using pyrosequencing to compare the two microbial communities. Total DNA was extracted from both the disease-conducive and -suppressive soils. A phylogenetically taxon-informative region of the 16S rRNA gene was used to establish operational taxonomic units (OTUs) to characterize bacterial community richness and diversity. In total, 1,124 OTUs were detected and 565 OTUs (10% dissimilarity) were identified in disease-conducive soil and 859 in disease-suppressive soil, including 300 shared both between sites. Common phyla based on relative sequence abundance were Acidobacteria, Proteobacteria, and Firmicutes. Sequences of Lysobacter were found in significantly higher numbers in the disease-suppressive soil, as were sequences of group 4 and group 6 Acidobacteria. The relative abundance of sequences identified as the genus Bacillus was significantly higher by an order of magnitude in the disease-conducive soil.

Culture-Based Assessment of Microbial Communities in Soil Suppressive to Potato Common Scab.

A field in East Lansing, MI, showed a decline of potato common scab compared with an adjacent potato field. To confirm that the decline was due to biological factors, the soil was assayed. In the greenhouse, putative common-scab-suppressive soil (SS) was either treated with various temperatures or mixed with autoclaved SS at various ratios. Pathogenic Streptomyces scabies was incorporated into the treated soil at 106 CFU/cm3 of soil, followed by planting of either potato or radish. Disease severity was negatively correlated with the percentage of SS in the mixture and positively correlated with temperature above 60°C. The soil was screened for four groups of potential antagonists (general bacteria, streptomycetes, fluorescent pseudomonads, and bacilli) pairing in culture with S. scabies. The frequency of antagonistic bacteria in SS was higher than common-scab-conducive soil (CS) in all four groups but only pseudomonads and streptomycetes were significantly higher. The population of pathogenic Streptomyces spp. in the rhizosphere of CS was significantly higher than SS. Dilution plating of CS and SS samples showed no clear trends or differences in populations of total fungi, total bacteria, streptomycetes, fluorescent pseudomonads, and bacilli but terminal restriction fragment polymorphism analysis revealed two distinct microbial communities were present in SS and CS.