Target-Induced Electrochemical Sensor Based on Foldable Aptamer and MoS2@MWCNTs-PEI for Enhanced Detection of AFB1 in Peanuts.

Herein, a sensitive and selective electrochemical sensor based on aptamer folding was constructed to detect aflatoxin B1 (AFB1) in peanuts. Specifically, polyethylenimine-functionalized multiwalled carbon nanotubes modified with molybdenum disulfide (MoS2@MWCNTs-PEI) were used as the electrode matrix to enable a large specific surface area, which were characterized by the Randles-Sevcik equation. Additionally, AuNPs were used to immobilize the aptamer via the Au-S covalent bond and provide a favorable microenvironment for signal enhancement. Methylene blue (MB) was modified at the proximal 3' termini of the aptamer as the capture probe, while the signal transduction of the sensor was obtained through changes in conformation and position of MB induced by the binding between AFB1 and the probe. Changes in spatial conformation could be recorded by electrochemical methods more readily. This electrochemical aptasensor demonstrated remarkable sensitivity to AFB1 with an extensive detection range (1 pg/mL to 100 ng/mL) and a lower limit detection (1.0 × 10-3 ng/mL). Moreover, using the constructed aptasensor, AFB1 was identified successfully in peanut samples, with recoveries ranging from 95.83 to 107.53%, illustrating its potential use in determining AFB1 in food.

An "on-off-on" electrochemiluminescence aptasensor based on a self-enhanced luminophore for ochratoxin A detection.

A highly selective and sensitive "on-off-on" electrochemiluminescence (ECL) aptasensor based on a self-enhanced luminophore was developed for the detection of ochratoxin A (OTA). Specifically, polyethyleneimine functionalized multi-walled carbon nanotubes decorated with gold nanoparticles (AuNPs-PEI-MWCNTs) were used as the electrode matrix to accelerate electron transfer and provide a favorable microenvironment for self-enhanced luminophore loading and ECL signal enhancement. In addition, black phosphorus quantum dots (BPQDs) were used as co-reactants of the ECL reagent tris (2,2'-bipyridyl) ruthenium(II) (Ru(bpy)32+) in ECL experiments, and the reaction mechanism was investigated. The self-enhanced luminophore Ru@SiO2-BPQDs was obtained by encapsulating Ru(bpy)32+ in silica (SiO2) nanoparticles and then combining it with BPQDs through electrostatic interaction. In conventional ECL systems, the emitter and its co-reactants reacted via the inter-nanoparticle pathway, leading to long distance electron transfer. However, the electron transfer distance in the self-enhanced luminophore was significantly shortened due to the intra-nanoparticle electron transfer pathway because BPQDs and oxidized Ru(bpy)32+ were bound within one nanoparticle, thereby improving ECL efficiency to achieve the first "switch-on" state. Then, the luminophore was quenched using ferrocenes (Fc) modified on an aptamer to achieve the "switch-off" state. Finally, OTA was specifically identified by the adapter, causing Fc to be released from the sensor interface, restoring the ECL intensity to achieve the second "switch-on" state. Under optimal conditions, the aptasensor exhibited good sensitivity, stability, and reproducibility, with a linear detection range from 0.1 to 320 ng/mL and a detection limit of 0.03 ng/mL. The novel ECL aptasensor provided a common analytical tool for the detection of mycotoxins and other small molecules.

Ultrasensitive electrochemiluminescence aptasensor based on ABEI reduced silver nanoparticles for the detection of profenofos.

An ultrasensitive electrochemiluminescence (ECL) aptasensor for detection of profenofos was constructed by the reducibility and chemiluminescence property of N-(aminobutyl)-N-(ethylisoluminol) (ABEI). ABEI was used to reduce silver nitrate (AgNO3) to silver nanoparticles (AgNPs), which could be adsorbed on the lattice of graphene oxide (GO) to form ABEI-AgNPs-GO complex. This compound could achieve excellent luminescence. The aptamer (Apt) modified (5') by sulfhydryl groups could be immobilized on AgNPs to capture profenofos. When profenofos was present, the ECL signal of the aptasensor would be weakened. To further demonstrate the successful construction of the aptasensor, cyclic voltammetry tests were performed on an electrochemical workstation and an ECL analyzer, respectively. The standard curve and specificity experiment both showed that the sensor had the advantages of low limit of detection (LOD) and good specificity. Under the optimal conditions, the aptasensor had a good linear response for profenofos in the range of 1 × 10-1-1 × 104 ng/mL. It also had a LOD of 6.7 × 10-2 ng/mL and a correlation coefficient (R2) of 0.9991. The aptasensor had been successfully applied to the detection of profenofos in vegetables. The recovery range of the proposed ECL aptasensor was 98 % ~ 107.4 %.

Broad-specificity time-resolved fluorescent immunochromatographic strip for simultaneous detection of various organophosphorus pesticides based on indirect probe strategy.

The massive use of organophosphorus pesticides (OPs) poses a great threat to food safety, human health and environmental protection. As there are many kinds of pesticides, their detection is facing a severe challenge. The simultaneous detection of multiple organophosphorus pesticides in one test is a problem to be solved at present. In this paper, a time-resolved fluorescent immunochromatographic (TRFIA) strip is prepared by using broad-specificity antibodies (Abs) of OPs as the recognition element. Abs were connected to europium oxide latex microspheres using sheep anti-mouse antibodies (SaMIgG) to form an indirect probe. This strategy could effectively realize signal amplification, and could save the amount and protect the activity of Abs. After the detection, the color change of the test line (T-line) was observed to make qualitative judgment under UV-light (365 nm). Then, the images of the positive sample were analyzed by using ImageJ to complete the quantitative detection. Under optimal construction and operating conditions, the limit of detection of the strip could reach 0.53 ng g-1. And the TRFIA strip performed well in the additive test of vegetable samples. It is inexpensive to prepare, convenient to carry, and easy to operate. More importantly, it improves the detection efficiency and meets the needs of rapid field testing of a large number of samples.