Release of silver and titanium from face masks traded for the general population.

Previous assessments of a selection of face masks intended for the general population in Belgium found that silver (Ag)-based biocides were present in masks advertised for antimicrobial properties; whereas titanium dioxide (TiO2) particles were detected in all the face masks in at least one layer corroborating its widespread use in the textile industry. The presence of Ag-based biocides and TiO2 particles in face masks raised questions on the possibility of release under normal wearing conditions, which could potentially cause a health risk to the consumers. Direct measurement of release of Ag and TiO2 particles during normal wearing is problematic by the lack of methodology to test release and to quantify inhaled particles. Therefore in this study, we investigated leaching experiments using artificial acid sweat as a method to evaluate the release of Ag-based biocides and TiO2 particles present in face masks. Leaching experiments were proposed as an alternative method to evaluate the quality of face masks, and as a higher tier method to assess face masks that are not safe-by-design. Results from leaching experiments showed that Ag was released in amounts varying from 0.03 up to 36 % of total Ag content, in four out of the eight face masks that claimed antimicrobial properties and that contained Ag. The leaching data of titanium (Ti) showed that despite TiO2 being detected in all face masks, only in one mask Ti was measured in detectable concentrations in artificial sweat (0.35 % of total Ti content). Comparison of leachable Ag and Ti with respective acceptable exposure limit values derived from inhalation exposure limits indicate that three face masks would need further risk assessment and could not be considered as intrinsically safe.

Accuracy of Multiple Pulse Oximeters in Stable Critically Ill Patients.

BACKGROUND: An accurate SpO2 value is critical in order to optimally titrate oxygen delivery to patients and to follow oxygenation guidelines. Limited prospective data exist on real-world performance of pulse oximeters in critically ill patients. The objective of this study was to assess accuracy and bias of the SpO2 values measured by several oximeters in hospitalized subjects. METHODS: We included stable adults in the ICU with an arterial catheter in place. Main exclusion criteria were poor SpO2 signal and SpO2 > 96%. In each subject, we simultaneously evaluated 4 oximeters: Nonin (Plymouth, Minnesota) embedded in the FreeO2 device (OxyNov, Québec City, Québec, Canada), Masimo (Radical-7, Masimo, Irvine, California), Philips (FAST, Philips, Amsterdam, the Netherlands), and Nellcor (N-600, Medtronic, Minneapolis, Minnesota). Arterial blood gases were drawn and simultaneously each oximeters' SpO2 values were collected. SpO2 values were compared to the reference (arterial oxygen saturation [SaO2 ] value) to determine bias and accuracy. The ability for oximeters to detect hypoxemia and the impact of oximeters on oxygen titration were evaluated. RESULTS: We included 193 subjects (153 male, mean age 66 y) in whom 211 sets of measurements were performed. The skin pigmentation evaluated by Fitzpatrick scale showed 96.2% of subjects were light skin (types 1 and 2). One oximeter overestimated SaO2 (Philips, +0.9%), whereas the 3 others underestimated SaO2 (Nonin -3.1%, Nellcor -0.3%, Masimo -0.2%). SaO2 was underestimated with Nonin oximeter in 91.3% of the cases, whereas it was overestimated in 55.2% of the cases with Philips oximeter. Moderate hypoxemia (SaO2 86-90% or PaO2 55-60 mm Hg) was detected in 92, 33, 42, and 11% of the cases with Nonin, Nellcor, Masimo, and Philips, respectively. CONCLUSIONS: We found significant bias and moderate accuracy between the tested oximeters and the arterial blood gases in the studied population. These discrepancies may have important clinical impact on the detection of hypoxemia and management of oxygen therapy.

Flexible graphene photodetectors for wearable fitness monitoring.

Wearable health and wellness trackers based on optical detection are promising candidates for public health uses due to their noninvasive tracking of vital health signs. However, so far, the use of rigid technologies hindered the ultimate performance and form factor of the wearable. Here, we demonstrate a new class of flexible and transparent wearables based on graphene sensitized with semiconducting quantum dots (GQD). We show several prototype wearable devices that are able to monitor vital health signs noninvasively, including heart rate, arterial oxygen saturation (SpO2), and respiratory rate. Operation with ambient light is demonstrated, offering low-power consumption. Moreover, using heterogeneous integration of a flexible ultraviolet (UV)-sensitive photodetector with a near-field communication circuit board allows wireless communication and power transfer between the photodetectors and a smartphone, offering battery-free operation. This technology paves the way toward seamlessly integrated wearables, and empowers the user through wireless probing of the UV index.

Photocatalytic Hydrogen Evolution Driven by a Heteroleptic Ruthenium(II) Bis(terpyridine) Complex.

Since the initial report by Lehn et al. in 1979, ruthenium tris(bipyridine) ([Ru(bpy)3]2+) and its numerous derivatives were applied as photosensitizers (PSs) in a large panel of photocatalytic conditions while the bis(terpyridine) analogues were disregarded because of their low quantum yields and short excited-state lifetimes. In this study, we prepared a new terpyridine ligand, 4'-(4-bromophenyl)-4,4‴:4″,4‴'-dipyridinyl- 2,2':6',2″-terpyridine (Bipytpy) and used it to prepare the heteroleptic complex [Ru(Tolyltpy)(Bipytpy)](PF6)2 (1; Tolyltpy = 4'-tolyl-2,2':6',2'-terpyridine). Complex 1 exhibits enhanced photophysical properties with a higher quantum yield (7.4 × 10-4) and a longer excited-state lifetime (3.8 ns) compared to those of [Ru(Tolyltpy)2](PF6)2 (3 × 10-5 and 0.74 ns, respectively). These enhanced photophysical characteristics and the potential for PS-catalyst interaction through the peripheral pyridines led us to apply the complex for visible-light-driven hydrogen evolution. The photocatalytic system based on 1 as the PS, triethanolamine as a sacrificial donor, and cobaloxime as a catalyst exhibits sustained activity over more than 10 days under blue-light irradiation (light-emitting diode centered at 450 nm). A maximum turnover number of 764 was obtained after 12 days.

Predicting Keto-Enol Equilibrium from Combining UV/Visible Absorption Spectroscopy with Quantum Chemical Calculations of Vibronic Structures for Many Excited States. A Case Study on Salicylideneanilines.

Salicylideneanilines are characterized by a tautomer equilibrium, between an enol and a keto form of different colors, at the origin of their remarkable thermochromic, solvatochromic, and photochromic properties. The enol form is usually the most stable but appropriate choice of substituents and conditions (solvent, crystal, host compound) can displace the equilibrium toward the keto form so that there is a need for fast prediction of the keto:enol abundance ratio. Here we demonstrate the reliability of a combined theoretical-experimental method, based on comparing simulated and measured UV/visible absorption spectra, to determine this keto/enol ratio. The calculations of the excitation energies, oscillator strengths, and vibronic structures of both enol and keto forms are performed for all excited states absorbing in the relevant (visible and near-UV) wavelength range at the time-dependent density functional theory level by accounting for solvent effects using the polarizable continuum model. This approach is illustrated for two salicylideneaniline derivatives, which are present, in solution, under the form of keto-enol mixtures. The results are compared to those of chemometric analysis as well as ab initio predictions of the reaction free enthalpies.