RESUMO
EUSO-Balloon is a pathfinder for JEM-EUSO, the mission concept of a spaceborne observatory which is designed to observe Ultra-High Energy Cosmic Ray (UHECR)-induced Extensive Air Showers (EAS) by detecting their UltraViolet (UV) light tracks "from above." On August 25, 2014, EUSO-Balloon was launched from Timmins Stratospheric Balloon Base (Ontario, Canada) by the balloon division of the French Space Agency CNES. After reaching a floating altitude of 38 km, EUSO-Balloon imaged the UV light in the wavelength range â¼290-500 nm for more than 5 hours using the key technologies of JEM-EUSO. The flight allowed a good understanding of the performance of the detector to be developed, giving insights into possible improvements to be applied to future missions. A detailed measurement of the photoelectron counts in different atmospheric and ground conditions was achieved. By means of the simulation of the instrument response and by assuming atmospheric models, the absolute intensity of diffuse light was estimated. The instrument detected hundreds of laser tracks with similar characteristics to EASs shot by a helicopter flying underneath. These are the first recorded laser tracks measured from a fluorescence detector looking down on the atmosphere. The reconstruction of the direction of the laser tracks was performed. In this work, a review of the main results obtained by EUSO-Balloon is presented as well as implications for future space-based observations of UHECRs.
RESUMO
The surface plasmon resonance (SPR) technique has been primarily used in the field of biology, in particular for the study of antibody-antigen interactions. Recently, polymers were introduced to form inclusion complexes. We describe here, a methodology based on surface plasmon resonance imaging to study water-resistant and reversible inclusion complexes using systems which are compatible with a cosmetic use. The purpose of this study is to follow in real time the interaction between two polymers. To carry out this study: â¢A biochip based on a covalent binding of one "host polymer" on a gold-activated surface was developed.â¢The binding of the host polymer to a guest polymer was monitored.â¢The presence of interactions between the ß-cyclodextrins groups of the host polymer and the adamantyl functional groups of the guest polymer and the possibility of dissociating the complex were established. This technique allowed carrying out parallel assays for optimizing the amount of complexes formed, the host polymer being spotted at five concentrations. It was then possible to study the influence of the concentration in host system for two concentrations of the guest polymer. The concentration in the host polymer yielding the highest immobilization of the guest system was further determined.
RESUMO
As a result of the low yield of cartilage from primary patient harvests and a high demand for autologous cartilage for reconstructive surgery and structural repair, primary explant cartilage must be augmented by tissue engineering techniques. In this study, chondrocytes seeded on PLLA/PGA scaffolds in static culture and a direct perfusion bioreactor were biochemically and histologically analyzed to determine the effects of fluid flow and media pH on matrix assembly. A gradual media pH change was maintained in the bioreactor within 7.4-6.96 over 2 weeks compared to a more rapid decrease from 7.4 to 6.58 in static culture over 3 days. Seeded scaffolds subjected to 1 microm/s flow demonstrated a 118% increase (p < 0.05) in DNA content, a 184% increase (p < 0.05) in GAG content, and a 155% (p < 0.05) increase in hydroxyproline content compared to static culture. Distinct differences were noted in tissue morphology, including more intense staining for proteoglycans by safranin-O and alignment of cells in the direction of media flow. Culture of chondrocyte seeded matrices thus offers the possibility of rapid in vitro expansion of donor cartilage for the repair of structural defects, tracheal injury, and vascularized tissue damage.
