Evaluation of Hybrid Surgical Access Approaches for Pulmonary Valve Implantation in an Acute Swine Model.

Percutaneous implantation of the pulmonary valve through peripheral vascular access can be limited due to poor venous access, low patient weight, hemodynamic or rhythmic instability, and size constraints related to the valve. In such cases, hybrid procedures may provide alternatives. Because the most commonly used median sternotomy is unsuitable for chronic trials in large animals, we evaluated several hybrid approaches for pulmonary valve replacement in a swine model. We tested the feasibility of hybrid pulmonary valve implantation in pigs by using inhouse-generated valves containing bare-metal or nitinol stents. Valves consisted of bovine jugular veins, bovine pericardial valves, or sprayed polyurethane valves. Access was achieved through median sternotomy, lower partial sternotomy, transverse sternotomy, or right lateral thoracotomy. The delivery device was introduced in a transventricular manner. Implantation took place under fluoroscopic and epicardial echocardiographic guidance. We achieved implantation of the stented valve in 12 (92.3%) pigs, of which 5 (41.7%) of the implanted valves were in an optimal position. Paravalvular leakage occurred in 2 trials (16.7%). Lower partial sternotomy provided the best trade-off between feasibility and minimized trauma for long-term animal trials. Here we describe our experience with hybrid pulmonary valve implantation in an acute large-animal (swine) model. We demonstrate the feasibility of the procedure in terms of surgical technique and the perioperative management and preparation of the field for a chronic trial.

Bacterial nanocellulose as a new patch material for closure of ventricular septal defects in a pig model.

OBJECTIVES: Current materials for closure of cardiac defects such as ventricular septal defects (VSDs) are associated with compliance mismatch and a chronic inflammatory response. Bacterial nanocellulose (BNC) is a non-degradable biomaterial with promising properties such as high mechanical strength, favourable elasticity and a negligible inflammatory reaction. The aim of this study was the evaluation of a BNC patch for VSD closure and the investigation of its in vivo biocompatibility in a chronic pig model. METHODS: Young's modulus and tensile strength of BNC patches were determined before and after blood exposure. Muscular VSDs were created and closed with a BNC patch on the beating heart in an in vivo pig model. Hearts were explanted after 7, 30 or 90 days. Macropathology, histology and immunohistochemistry were performed. RESULTS: Young's modulus and tensile strength of the BNC patch decreased after blood contact from 6.3 ± 1.9 to 3.86 ± 2.2 MPa (P < 0.01) and 0.33 ± 0.06 to 0.26 ± 0.06 MPa (P < 0.01), respectively, indicating the development of higher elasticity. Muscular VSDs were closed with a BNC patch without residual shunting. After 90 days, a mild chronic inflammatory reaction was present. Moreover, there was reduced tissue overgrowth in comparison with polyester. Proceeding cellular organization characterized by fibromuscular cells, production of extracellular matrix, neoangiogenesis and complete neoendothelialization were found. There were no signs of thrombogenicity. CONCLUSIONS: BNC patches can close VSDs with good mid-term results and its biocompatibility can be considered as satisfactory. Its elasticity increases in the presence of blood, which might be advantageous. Therefore, it has potential to be used as an alternative patch material in congenital heart disease.