[14]Heterophane prototypes containing azolium and/or azole anion-binding motifs.

Revisiting a '3 + 1' convergent stepwise strategy permitted the synthesis of [14]imidazoliophane 2·2Br in excellent yield for a macrocyclization. The new [14]triazoliophane 3 and bis(1,2,3-triazolium) counterpart 4·2Cl were less synthetically accessible and the hybrid derivative 5·Cl proved troublesome to prepare. Triazolophane 3 was devoid of anion-binding affinities, while charged [14]heterophane prototypes showed a particular preference for acetate. When association constants were compared, dicationic systems 2·2PF6 and 4·2PF6 showed greater values than monocationic macrocycle 5·PF6, and the highest affinities corresponded to the bis(imidazolium) receptor 2·2PF6.

A simple halide-to-anion exchange method for heteroaromatic salts and ionic liquids.

A broad and simple method permitted halide ions in quaternary heteroaromatic and ammonium salts to be exchanged for a variety of anions using an anion exchange resin (A(-) form) in non-aqueous media. The anion loading of the AER (OH(-) form) was examined using two different anion sources, acids or ammonium salts, and changing the polarity of the solvents. The AER (A(-) form) method in organic solvents was then applied to several quaternary heteroaromatic salts and ILs, and the anion exchange proceeded in excellent to quantitative yields, concomitantly removing halide impurities. Relying on the hydrophobicity of the targeted ion pair for the counteranion swap, organic solvents with variable polarity were used, such as CH(3)OH, CH(3)CN and the dipolar nonhydroxylic solvent mixture CH(3)CN:CH(2)Cl(2) (3:7) and the anion exchange was equally successful with both lipophilic cations and anions.

A general halide-to-anion switch for imidazolium-based ionic liquids and oligocationic systems using anion exchange resins (A- form).

Further studies on the application of an AER (A(-) form) method broadened the anion exchange scope of representative ionic liquids and bis(imidazolium) systems. Depending on the hydrophobicity nature of the targeted imidazolium species and counteranions, different organic solvents were used to swap halides for assorted anions, proceeding in excellent to quantitative yields.

Synthetic approaches to multifunctional indenes.

The synthesis of multifunctional indenes with at least two different functional groups has not yet been extensively explored. Among the plausible synthetic routes to 3,5-disubstituted indenes bearing two different functional groups, such as the [3-(aminoethyl)inden-5-yl)]amines, a reasonable pathway involves the (5-nitro-3-indenyl)acetamides as key intermediates. Although several multistep synthetic approaches can be applied to obtain these advanced intermediates, we describe herein their preparation by an aldol-type reaction between 5-nitroindan-1-ones and the lithium salt of N,N-disubstituted acetamides, followed immediately by dehydration with acid. This classical condensation process, which is neither simple nor trivial despite its apparent directness, permits an efficient entry to a variety of indene-based molecular modules, which could be adapted to a range of functionalized indanones.

Indene-based frameworks targeting the 5-HT6 serotonin receptor: ring constraint in indenylsulfonamides using cyclic amines and structurally abbreviated counterparts.

Further studies in quest of 5-HT(6) serotonin receptor ligands led to the design and synthesis of a few selected examples of N-(inden-5-yl)sulfonamides with a ring-constrained aminoethyl side chain at the indene 3-position, some of which exhibited a high binding affinity, such as the pyrrolidine analogue 28 (K(i)=3nM). Moreover, the structurally abbreviated N-(inden-5-yl)sulfonamides showed K(i) values > or = 43 nM, which indicates that neither the N,N-aminoethyl nor the conformationally restricted aminoethyl side arm at the indene 3-position are required for binding. Selected compounds were then tested in a functional cAMP stimulation assay and found to act as 5-HT(6) antagonists, although with moderate potency at the micromolar level.

Identification of novel indanylsulfonamide guanylhydrazones as potent 5-HT6 serotonin receptor antagonists.

Changing the N,N-(dimethylamino)ethyl side chain in the N-[3-(aminoethyl)inden-5-yl]sulfonamide 5-HT(6) serotonin receptor agonists 1 by a conformationally rigid guanylhydrazone moiety at the indene 3-position led to the identification of the title indanylguanylhydrazones 6, which exhibited excellent binding affinities and an antagonistic response at the 5-HT(6) receptor, with K(i) and IC(50) values in the nanomolar range (K(i) >or= 1.2 nM, IC(50) >or= 47 nM, and I(max)

Indene-based scaffolds. 2. An indole-indene switch: discovery of novel indenylsulfonamides as 5-HT6 serotonin receptor agonists.

Scaffold selection involving an indole-to-indene core change led to the discovery of a series of indenylsulfonamides that act as 5-HT6 serotonin receptor agonists. The variety of the targeted ligands and their synthetic complexity required multistep synthetic approaches. The novel indenylsulfonamides exhibited variable binding affinities for the 5-HT6 receptor, and the in vitro primary binding profiles of the preferred compounds revealed them to be 5-HT6 receptor agonists with Ki values > or =4.5 nM. The structural changes responsible for enhancing the affinities indicated a directing effect modulated by the nature of the indene core, the substitution at the aminoethyl side chain, and especially by the aryl(heteroaryl)sulfonyl group on the indene 5-position. A representative of the family, the N-(inden-5-yl)imidazothiazole-5-sulfonamide (43), exhibited a high affinity and functioned as a potent full agonist for the 5-HT6 receptor (Ki = 4.5 nM, EC50 = 0.9 nM, Emax = 98%).

Bis(imidazolium)-calix[4]arene receptors for anion binding.

Efficient access to the bis(imidazolyl)calixarene 2 and dicationic bis(imidazolium) salts 1a,b x 2X directly bonded to the upper rim of calixarene structure has been reported. Anion binding properties of the new receptors were studied by 1H NMR spectroscopic methods. Bis(N-butylimidazolium) dication 1a exhibited the best recognition properties toward carboxylate anions with a 1:1 receptor-anion binding stoichiometry, whereas the presence of a bulky group such as isopropyl (1b) increased the difficulty of both imidazolium moieties to be able to support the association with the same single anion.

Indene-based scaffolds. Design and synthesis of novel serotonin 5-HT6 receptor ligands.

A series of novel indene derivatives designed by a scaffold selection gave access to several examples of (Z)-arylmethylideneindenes and indenylsulfonamides that acted as serotonin 5-HT(6) receptor ligands. Different synthetic multistep routes could be applied to these target compounds, each with their own complexity and limitations. A reasonable route involved the (3-indenyl)acetic acids as the key intermediates, and two alternatives were also examined. The first protocol used was a two-step sequence employing a modified Horner-Wadsworth-Emmons reaction, but better results were obtained with a procedure based on the condensation of indanones with the lithium salt of ethyl acetate, followed immediately by dehydration with acid and hydrolysis/isomerization under basic catalysis. (3-Indenyl)acetic acids were transformed to the corresponding acetamides, which were effectively reduced to indenylsulfonamides using an optimized procedure with AlH(3)-NMe(2)Et. The binding at the 5-HT(6) receptor was with moderate affinity (K(i) = 216.5 nM) for the (Z)-benzylideneindenylsulfonamide and enhanced affinity for the simple indenylsulfonamide counterpart (K(i) = 50.6 nM). Selected indenylsulfonamides were then tested, showing K(i) values as low as 20.2 nM.

1,2-Diaryl(3-pyridyl)ethanone oximes. Intermolecular hydrogen bonding networks revealed by X-ray diffraction.

The synthesis of a set of 1-aryl-2-aryl(3-pyridyl)ethanones 1-5 and the corresponding ketoximes 6-9 is reported. Structural studies of oximes 6, 7 and 9 were performed in solution using (1)H-NMR and in the solid state by X-ray crystallography, providing evidence of H-bonding networks. The crystal packing was controlled by homomeric intermolecular oxime...oxime H-bond interactions for 6 and cooperative oxime...N(pyridyl) and CH/pi interactions for 7 and 9.

Coordination features of bis(N-heterocyclic carbenes) and bis(oxazolines) with 1,3-alkylidene-2,4,6-trimethylbenzene spacers. Synthesis of the ligands and silver and palladium complexes.

The synthesis of simple imidazolium-based ligand precursors containing a 1,3-alkylidene-2,4,6-trimethylbenzene spacer was examined and different synthetic protocols were applied depending on the nature of the alkylidene arm. For a methylene arm, simple dications 5a,b.2CI were obtained directly. The higher homologue counterparts were conveniently prepared by general multistep routes following a five-step sequence for ethylene dications 6a,b.2Br or a six-step sequence for propylene dications 7a,b.2Br in > or = 52% overall yield. Imidazolium salts based on the shorter methylene spacer were used to prepare palladium complexes (17-20) with N-heterocyclic carbenes via transmetallation from well-defined silver compounds or directly in basic conditions. In order to facilitate spectroscopic characterisation of the palladium species two [Pd(allyl)(bis-oxazoline)]+ (25-26) complexes with the same ligand bridge were synthesized. [PdX2bisL] complexes appeared in solution as mixtures of species, mononuclear with cis- or trans-geometry or oligomeric compounds. The reaction of [PdCl(allyl)]2 and micro-bis(carbene)(AgX)2 complexes in 1 : 1 or in 0.5 : 1 ratio leads to binuclear compounds [Pd2Cl2(allyl)2(micro-bis-carbene)] (19a,19b) and to very labile monomeric [Pd(allyl)(bis-carbene)]+ (20a,20b) compounds, respectively. The preparation of analogous [Pd(allyl)(bis-oxazoline)]+ complexes showed the formation of one of the four possible isomers. [Pd(allyl)(bis-oxazoline)]PF6 complexes were inactive as catalytic precursors in the allylic substitution reaction.

Novel bis-betaines and betaines within [1(4)]meta-heterophane frameworks.

After prior selection of betaine building blocks for the construction of quadrupolar heterophane frameworks, a convergent "3+1" synthetic strategy is reported for the synthesis of the title macrocycles composed of heterocyclic betaine subunit(s). These typify the first example of simple cyclophanes constructed out of both highly pi-excessive and highly pi-deficient heteroaromatic moieties linked in a 1,3-alternating fashion. The chemical reactivity of the quadrupolar heterophanes 1a and 1c toward electrophiles under neutral conditions corroborated their bis-betaine structure. The structural features of the bis-betaines 1, betaines 2 x PF6 and 5 x X, and the corresponding dicationic [1(4)]heterophanes 3 x 2X and 4 x 2Cl were studied by 1H and 13C NMR spectroscopy and electrospray ionization mass spectrometry, and confirmed by single-crystal X-ray diffraction analysis of macrocycles 1a and 2a x PF6.