A high-precision wound healing assay based on photosensitized culture substrates.

Quantitative assessment of cell migration in vitro is often required in fundamental and applied research from different biomedical areas including wound repair, tumor metastasis or developmental biology. A collection of assays has been established throughout the years like the most widely used scratch assay or the so-called barrier assay. It is the principle of these assays to introduce a lesion into an otherwise confluent monolayer in order to study the migration of cells from the periphery into this artificial wound and determine the migration rate from the time necessary for wound closure. A novel assay makes use of photosensitizers doped into a polystyrene matrix. A thin layer of this composite material is coated on the bottom of regular cell culture ware showing perfect biocompatibility. When adherent cells are grown on this coating, resonant excitation of the photosensitizer induces a very local generation of 1O2, which kills the cells residing at the site of illumination. Cells outside the site of illumination are not harmed. When excitation of the photosensitizer is conducted by microscopic illumination, high-precision wounding in any size and geometry is available even in microfluidic channels. Besides proof-of-concept experiments, this study gives further insight into the mechanism of photosensitizer-mediated cell wounding.

GPR4 in the pH-dependent migration of melanoma cells in the tumor microenvironment.

Due to its high metastatic potential, malignant melanoma is one of the deadliest skin cancers. In melanoma as well as in other cancers, acidification of the tumor microenvironment (=TME, inverse pH-gradient) is a well-known driver of tumor progression and metastasis. Membrane-bound receptors, such as the proton-sensitive GPCR (pH-GPCR) GPR4, are considered as potential initiators of the signalling cascades relevant to malignant transformation. In this study, we investigated the pH-dependent migration of GPR4 wildtype/overexpressing SK-Mel-28 cells using an impedance-based electrical wounding and migration assay and classical Boyden chamber experiments. Migration of GPR4 overexpressing SK-Mel-28 cells was enhanced in a range of pH 6.5-7.5 as compared to controls in the impedance-based electrical wounding and migration assay. In Boyden chamber experiments, GPR4 overexpression only increased migration at pH 7.5 in a Matrigel-free setup, but not at pH 6.5. Results indicate that GPR4 is involved in the migration of melanoma cells, especially in the tumor periphery, and that this process is affected by pH in the TME.

Elucidation of the functional roles of the Q and I motifs in the human chromatin-remodeling enzyme BRG1.

The Snf2 proteins, comprising 53 different enzymes in humans, belong to the SF2 family. Many Snf2 enzymes possess chromatin-remodeling activity, requiring a functional ATPase domain consisting of conserved motifs named Q and I-VII. These motifs form two recA-like domains, creating an ATP-binding pocket. Little is known about the function of the conserved motifs in chromatin-remodeling enzymes. Here, we characterized the function of the Q and I (Walker I) motifs in hBRG1 (SMARCA4). The motifs are in close proximity to the bound ATP, suggesting a role in nucleotide binding and/or hydrolysis. Unexpectedly, when substituting the conserved residues Gln758 (Q motif) or Lys785 (I motif) of both motifs, all variants still bound ATP and exhibited basal ATPase activity similar to that of wildtype BRG1 (wtBRG1). However, all mutants lost the nucleosome-dependent stimulation of the ATPase domain. Their chromatin-remodeling rates were impaired accordingly, but nucleosome binding was retained and still comparable with that of wtBRG1. Interestingly, a cancer-relevant substitution, L754F (Q motif), displayed defects similar to the Gln758 variant(s), arguing for a comparable loss of function. Because we excluded a mutual interference of ATP and nucleosome binding, we postulate that both motifs stimulate the ATPase and chromatin-remodeling activities upon binding of BRG1 to nucleosomes, probably via allosteric mechanisms. Furthermore, mutations of both motifs similarly affect the enzymatic functionality of BRG1 in vitro and in living cells. Of note, in BRG1-deficient H1299 cells, exogenously expressed wtBRG1, but not BRG1 Q758A and BRG1 K785R, exhibited a tumor suppressor-like function.

Oligolayer-coated nanoparticles: impact of surface topography at the nanobio interface.

Layer-by-layer coating of nanoparticles with a layer number in the single-digit range has gained increasing attention in the field of nanomedicinal research. However, the impact of using various polyelectrolytes on oligolayer formation and, more importantly, their influence on the interaction with the biological system has not often been considered in the past. Hence, we investigated the polyelectrolyte deposition profiles and resulting surface topographies of up to three polyelectrolyte layers on a flat gold sensor surface using three different polycations, namely, poly(ethylene imine) (PEI), poly(allylamine hydrochloride) (PAH), and poly(diallylammonium chloride) (PD), each in combination with poly(styrenesulfonate) (PSS). Surface plasmon resonance spectroscopy and atomic force microscopy revealed that the PEI/PSS pair in particular showed a so-called overshoot phenomenon, which is associated with partial polyelectrolyte desorption from the surface. This is also reflected by a significant increase in the surface roughness. Then, after having transferred the oligolayer assembly onto nanoparticles of ∼32 nm, we realized that quite similar surface topographies must have emerged on a curved gold surface. A major finding was that the extent of surface roughness contributes significantly to the fashion by which the oligolayer-coated nanoparticles interact with serum proteins and associate with cells. For example, for the PEI/PSS system, both the surface roughness and protein adsorption increased by a factor of ∼12 from the second to third coating layer and, at the same time, the cell association massively decreased to only one-third. Our study shows that surface roughness, along with other particle properties such as size, shape, zeta potential, and hydrophobicity, is another decisive factor for nanoparticles in a biological context, which has indeed been discussed previously but has not to date been investigated for oligolayers.

A highly K(+)-selective phenylaza-[18]crown-6-lariat-ether-based fluoroionophore and its application in the sensing of K+ ions with an optical sensor film and in cells.

Herein, we report the synthesis of two phenylaza-[18]crown-6 lariat ethers with a coumarin fluorophore (1 and 2) and we reveal that compound 1 is an excellent probe for K(+) ions under simulated physiological conditions. The presence of a 2-methoxyethoxy lariat group at the ortho position of the anilino moiety is crucial to the substantially increased stability of compounds 1 and 2 over their lariat-free phenylaza-[18]crown-6 ether analogues. Probe 1 shows a high K(+)/Na(+) selectivity and a 2.5-fold fluorescence enhancement was observed in the presence of 100 mM K(+) ions. A fluorescent membrane sensor, which was prepared by incorporating probe 1 into a hydrogel, showed a fully reversible response, a response time of 150 s, and a signal change of 7.8% per 1 mM K(+) within the range 1-10 mM K(+). The membrane was easily fabricated (only a single sensing layer on a solid polyester support), yet no leaching was observed. Moreover, compound 1 rapidly permeated into cells, was cytocompatible, and was suitable for the fluorescent imaging of K(+) ions on both the extracellular and intracellular levels.

A whole-cell biosensor as in vitro alternative to skin irritation tests.

This study presents the time-resolved detection of chemically induced stress upon intracellular signaling cascades by using genetically modified sensor cells based on the human keratinocyte cell line HaCaT. The cells were stably transfected with a HSP72-GFP reporter gene construct to create an optical sensor cell line expressing a stress-inducible reporter protein. The time- and dose-dependent performance of the sensor cells is demonstrated and discussed in comparison to a label-free impedimetric monitoring approach (electric cell-substrate impedance sensing, ECIS). Moreover, a microfluidic platform was established based on µSlidesI(0,4)Luer to allow for a convenient, sterile and incubator-independent time-lapse microscopic observation of the sensor cells. Cell growth was successfully achieved in this microfluidic setup and the cellular response to a cytotoxic substance could be followed in real-time and in a non-invasive, sensitive manner. This study paves the way for the development of micro-total analysis systems that combine optical and impedimetric readouts to enable an overall quantitative characterization of changes in cell metabolism and morphology as a response to toxin exposure. By recording multiple parameters, a detailed discrimination between competing stress- or growth-related mechanisms is possible, thereby presenting an entirely new in vitro alternative to skin irritation tests.

Macroporous silicon chips for laterally resolved, multi-parametric analysis of epithelial barrier function.

This study describes a novel assay to visualize the macromolecular permeability of epithelial and endothelial cell layers with subcellular lateral resolution. Defects within the cell layer and details about the permeation route of the migrating solute are revealed. The assay is based on silicon chips with densely packed, highly ordered, dead-ended pores of µm-diameters on one side. The cells under study are grown on the porous side of the chip such that the pores in the growth surface serve as an array of femtolitre-sized cuvettes in which the permeating probe accumulates at the site of permeation. The pattern of pore filling reveals the permeability characteristics of the cell layer with a lateral resolution in the µm range. Coating of the chip surface with a thin layer of gold allows for impedance analysis of the adherent cells in order to measure their tightness for inorganic ions at the same time. The new assay provides an unprecedented look on epithelial and endothelial barrier function.

Studying cell-surface interactions in vitro: a survey of experimental approaches and techniques.

A better understanding of the interactions of animal (or human) cells with in vitro surfaces is the key to the successful development, improvement and optimization of biomaterials for biomedical or biotechnological purposes. State-of-the-art experimental approaches and techniques are a prerequisite for further and deeper insights into the mechanisms and processes involved in cell-surface adhesion. This chapter provides a brief but not complete survey of optical, mechanical, electrochemical and acoustic devices that are currently used to study the structural and functional properties of the cell-surface junction. Each technique is introduced with respect to the underlying principles before example data are discussed. At the end of the chapter all techniques are compared in terms of their strengths, limitations and technical requirements.