Upgraded Cherenkov time-of-flight detector for the AFP project.

We present the results of our performance studies of the upgraded Cherenkov time-of-flight (ToF) detector for the AFP (ATLAS Forward Proton) project. The latest version consists of solid L-shaped fused silica bars, new customized ALD-coated micro-channel plate photomultipliers (MCP-PMTs) miniPlanacon XPM85112-S-R2D2 with an extended lifetime which operate at low gains (order of 103), and an updated construction. The improvements were aimed to increase the efficiency, the lifetime as well as the radiation hardness of the detector which has been designed to operate in high radiation areas (above 400 kGy/year). The detector was finally tested at the CERN-SPS test-beam facility (120 GeV π+ particles) in August 2021 prior to its installation at the Large Hadron Collider (LHC) at CERN. Measurements proved the detector kept its inner timing resolution of 20 ps despite the rather low gain of its photodetector and reduced optical throughput caused by inevitable changes in the detector geometry.

The HEV Ventilator: at the interface between particle physics and biomedical engineering.

A high-quality, low-cost ventilator, dubbed HEV, has been developed by the particle physics community working together with biomedical engineers and physicians around the world. The HEV design is suitable for use both in and out of hospital intensive care units, provides a variety of modes and is capable of supporting spontaneous breathing and supplying oxygen-enriched air. An external air supply can be combined with the unit for use in situations where compressed air is not readily available. HEV supports remote training and post market surveillance via a Web interface and data logging to complement standard touch screen operation, making it suitable for a wide range of geographical deployment. The HEV design places emphasis on the ventilation performance, especially the quality and accuracy of the pressure curves, reactivity of the trigger, measurement of delivered volume and control of oxygen mixing, delivering a global performance which will be applicable to ventilator needs beyond the COVID-19 pandemic. This article describes the conceptual design and presents the prototype units together with a performance evaluation.

Performance studies of new optics for the time-of-flight detector of the AFP project.

We present the results of performance studies of the upgraded optical part of the time-of-flight subdetector prototype for the AFP (ATLAS Forward Proton) detector obtained during the test campaign in a synchrotron test-beam facility with 5 GeV electrons at the DESY laboratory (Hamburg, Germany) in June 2019. The detection of the particle arrival time is based on generation of Cherenkov light in an L-shaped fused silica bar. In the previous version of the ToF, all bars were made of two pieces (radiator and light guide) glued together with a dedicated glue (Epotek 305). This solution suffers from additional radiation damage of glue. We adopted a new technique of bar production without the need of glue. The new bars have a higher optical throughput by a factor of 1.6, reduced fragility, and better geometrical precision.

Forming amorphous calcium carbonate within hydrogels by enzyme-induced mineralization in the presence of N-(phosphonomethyl)glycine.

Amorphous inorganic materials have a great potential in material science. Amorphous calcium carbonate (ACC) is a widely useable system, however, its stabilization often turns out to be difficult and the synthesis is mostly limited to precipitation in solution as nanoparticles. Stable ACC in bulk phases would create new composite materials. Previous work described the enzyme-induced mineralization of hydrogels with crystalline calcium carbonate by entrapping urease into a hydrogel and treating this with an aqueous mineralization solution containing urea und calcium chloride. Here, this method was modified using a variety of crystallization inhibitors attached to the hydrogel matrix or added to the surrounding mineralization solution. It was found that only N-(phosphonomethyl)glycine (PMGly) in solution completely inhibits the crystallization of ACC in the hydrogel matrix. The stability of the homogeneously precipitated ACC could be accounted to the combination of stabilizing effects of the additive and stabilization through confinement. The crystallization could be accelerated at higher temperatures up to 60 °C. Here, a combination of Mg ions and PMGly was required to stabilize ACC in the hydrogel. Variation of these two compounds can be used to control a number of different calcium carbonate morphologies within the hydrogel. While the ACC nanoparticles within the hydrogel are stable over weeks even in water, a calcite layer grows on the surface of the hydrogel, which might be used as self-hardening mechanism of a surface.