RESUMO
Zinc-ion batteries (ZIBs) are promising candidates for safe energy storage applications. However, undesirable parasitic reactions such as dendrite growth, gas evaluation, anode corrosion, and structural damage to the cathode under an acidic microenvironment severely affected cell performance. To resolve these issues, an MXene entrapped in an ionic liquid semi-solid gel polymer electrolyte (GPE) composite was explored. The molecular-level mixing of poly(vinylidene fluoride-co-hexafluoropropylene) (PVHF), zinc trifluoromethanesulfonate (Zn(OTF)2), 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIBF4) ionic liquid, and Ti3C2Tx MXene provided a controlled Zn2+ shuttle toward the anode/cathode. Ti3C2Tx/EMIBF4/Zn(OTF)2/PVHF exhibited a breaking strength of 0.36 MPa with an associated extension of 23%. The Zn//Ti3C2Tx/EMIBF4/Zn(OTF)2/PVHF//Zn symmetric cell with continuous zinc plating/stripping exhibited excellent Zn2+ ion mobility toward the anode and cathode without undesired reactions. This was confirmed by post-mortem analysis after a symmetric cell compatibility test. The as-prepared GPE with a Na3V2(PO4)3 (NVP) cathode exhibited a high chemical diffusion coefficient of 1.14 × 10-7. It also showed an outstanding reversible capacity of 89 mAh g-1 at C/10 with an average discharge plateau voltage of 1.45 V, cycle durability, and controlled self-discharge. These results suggested that the Zn2+ ions in the Ti3C2Tx/EMIBF4/Zn(OTF)2/PVHF composite are reversibly labile in the anode and cathode directions.
RESUMO
D-penicillamine (PA) is a sulfur group-containing drug prescribed for various health issues, but overdoses have adverse effects. Therefore, regular, selective, and sensitive sensing is essential to reduce the need for further treatment. In this study, diphenylamine (DPA) was electropolymerized in an aqueous acidic medium. The PA detection sensitivity, selectivity, and limit of detection were enhanced by electropolymerizing DPA on an electrochemically reduced graphene oxide (ERGO)/glassy carbon (GC) surface. The formation of p-DPA and ERGO was investigated using various techniques. The as-prepared p-DPA@ERGO/GC revealed the excellent redox-active (N-C to N=C) sites of p-DPA. The p-DPA@ERGO/GC electrode exhibited excellent electrochemical sensing ability towards PA determination because of the presence of the -NH-functional moiety and effective interactions with the -SH group of PA. The p-DPA@ERGO/GC exhibited a high surface coverage of 9.23 × 10-12 mol cm-2. The polymer-modified p-DPA@ERGO/GC electrode revealed the amperometric determination of PA concentration from the 1.4 to 541 µM wide range and the detection limit of 0.10 µM. The real-time feasibility of the developed p-DPA@ERGO/GC electrode was tested with a realistic PA finding in human blood serum samples and yielded a good recovery of 97.5-101.0%, confirming the potential suitability in bio-clinical applications.