Thermal Rearrangement of Thiocarbonyl-Stabilised Triphenylphosphonium Ylides Leading to (Z)-1-Diphenylphosphino-2-(phenylsulfenyl)alkenes and Their Coordination Chemistry.

While thiocarbonyl-stabilised phosphonium ylides generally react upon flash vacuum pyrolysis by the extrusion of Ph3PS to give alkynes in an analogous way to their carbonyl-stabilised analogues, two examples with a hydrogen atom on the ylidic carbon are found to undergo a quite different process. The net transfer of a phenyl group from P to S gives (Z)-configured 1-diphenylphosphino-2-(phenylsulfenyl)alkenes in a novel isomerisation process via intermediate λ5-1,2-thiaphosphetes. These prove to be versatile hemilabile ligands with a total of seven complexes prepared involving five different transition metals. Four of these are characterised by X-ray diffraction with two involving the bidentate ligand forming a five-membered ring metallacycle and two with the ligand coordinating to the metal only through phosphorus.

Bis(cyclopentadienyl)titanium complexes of naphthalene-1,8-dithiolates, biphenyl 2,2'-dithiolates, and related ligands.

Titanocene 1,8-dithiolato-naphthalene and titanocene 2,2'-dithiolato biphenyl are produced by the reaction of naphtho[1,8-cd]-1,2-dithiole [or the biphenyl] with titanocene dicarbonyl (Ti(II)) in toluene at room temperature. The pro-ligands 2,7-di(tert-butyl)naphtho[1,8-cd]-1,2-dithiole, 5,6-dihydroacenaphtho[5,6-cd]-1,2-dithiole, 4,5-dithioacephenanthrylene, and 13,14-dithiapicene have been used in similar reactions with titanocene dicarbonyl to investigate the effect of steric bulk and of varying the naphthalene backbone on the final complex. The resulting Cp(2)TiS(2)Ar complexes (Ar = naphthalene) have been shown by temperature-dependent (1)H NMR spectroscopy to exist in solution in an envelope conformation with the six-membered TiS(2)C(3) rings undergoing inversion on the NMR time scale while the similar Cp(2)TiS(2)Ar complexes (Ar = biphenyl, binaphthalene) interconvert more rapidly. Titanocene 2,2'-disulfinato biphenyl has been synthesized by the salt elimination reaction of titanocene dichloride (Ti(IV)) and the disodium salt of biphenyl 2,2'-disulfinic acid. Finally, the effect of using pro-ligands where the sulfur atoms have been mono- or di-oxidized has been studied, and an interesting oxygen elimination reaction is observed for the S=O fragments but not for the SO(2) groups. All complexes have been characterized spectroscopically and seven X-ray structures are reported.

The preparation and characterisation of bimetallic iridium(II) complexes containing derivatised bridging naphthalene-1,8-disulfur or 4,5-dithiolato acephenanthrylene ligands.

Oxidative addition of the disulfide compounds naphtho[1,8-cd][1,2]dithiole, 2-tert-butylnaptho[1,8-cd][1,2]dithiole, 2,7-di-tert-butylnaphtho[1,8-cd][1,2]dithiole, 4,5-dithiaacephenanthrylene and the thio/sulfinyl and thio/sulfonyl compounds naphtho[1,8-cd][1,2]dithiole 1-oxide, and naphtho[1,8-cd][1,2]dithiole 1,1-dioxide respectively to [[Ir(mu-Cl)(cod)](2)] give dinuclear Ir-Ir bonded Ir(II) compounds [[IrCl(cod)](2)(mu(2)-1,8-S(2)-nap)] 1, [[IrCl(cod)](2)(mu(2)-1,8-S(2)-2-(t)Bu-nap)] 2, [[IrCl(cod)](2)(mu(2)-1,8-S(2)-2,7-di-(t)Bu-nap)]] 3, [[IrCl(cod)](2)(mu(2)-4,5-S(2)-phenan)] 4, [[IrCl(cod)](2)(mu(2)-1-S,8-[S(O)]-nap)] 5 and [[IrCl(cod)](2)(mu(2)-1-S,8-[S(O)(2)]-nap)] 6 where the di-sulfur ligands act as bridges between the two Ir(II) metal centres. The compounds were obtained in moderate to good yields as orange or deep red powders or crystalline solids. Five of the new complexes have been structurally characterised and were found to have Ir-Ir bond lengths in the range 2.7630(8) to 2.8113(11) A.

New pyridine carboxamide ligands and their complexation to copper(II). X-Ray crystal structures of mono-, di, tri- and tetranuclear copper complexes.

Seven new pyridine dicarboxamide ligands H2L(1-7) have been synthesised from condensation reactions involving pyridine-2,6-dicarboxylic acid (H2dipic), pyridine-2,6-dicarbonyl dichloride or 2,6-diaminopyridine with heterocyclic amine or carboxylic acid precursors. Crystallographic analyses of N,N'-bis(2-pyridyl)pyridine-2,6-dicarboxamide monohydrate (H2L8 x H2O), N,N'-bis[2-(2-pyridyl)methyl]pyridine-2,6-dicarboxamide and N,N'-bis[2-(2-pyridyl)ethyl]pyridine-2,6-dicarboxamide monohydrate revealed extensive intramolecular hydrogen bonding interactions. 2,6-Bis(pyrazine-2-carboxamido)pyridine (H2L6) and 2,6-bis(pyridine-2-carboxamido)pyridine (H2L7) reacted with copper(II) acetate monohydrate to give tricopper(II) complexes [Cu3(L)2(mu2-OAc)2]. X-Ray crystallography confirmed deprotonation of the amidic nitrogen atoms and that the (L6,7)2- ligands and acetate anions hold three copper(II) ions in approximately linear fashion. H2L8. Reacted with copper(II) tetrakis(pyridine) perchlorate to give [Cu(L8)(OH2)]2 x 2H2O, in which (L8)2- was tridentate through the nitrogen atoms of the central pyridine ring and the deprotonated carboxamide groups at one copper centre, with one of the terminal pyridyl rings coordinating to the other copper atom in the dimer. The corresponding reaction using H2L7 gave [Cu3(L7)2(py)2][ClO4]2, which transformed during an attempted recrystallisation from ethanol under aerobic conditions to a tetracopper(II) complex [Cu4(L7)2(L7-O)2].

Synthesis and characterisation of cyanodithioimidocarbonate [C2N2S2]2- complexes.

[PPh4]2[M(C2N2S2)2](M = Pt, Pd) and [Pt(C2N2S2)(PR3)2](PR3= PMe2Ph, PPh3) and [Pt(C2N2S2)(PP)](PP = dppe, dppm, dppf) were all obtained by the reaction of the appropriate metal halide containing complex with potassium cyanodithioimidocarbonate. The dimeric cyanodithioimidocarbonate complexes [[Pt(C2N2S2)(PR3)]2](PR3 = PMe2Ph), [M[(C2N2S2)(eta5-C5Me5)]2](M = Rh, Ir)and [[Ru(C2N2S2)(eta6-p-MeC6H4iPr)]2] have been synthesised from the appropriate transition metal dimer starting material. The cyanodithioimidocarbonate ligand is S,S and bidentate in the monomeric complexes with the terminal CN group being approximately coplanar with the CS2 group and trigonal at nitrogen thus reducing the planar symmetry of the ligand. In the dimeric compound one of the sulfur atoms bridges two metal atoms with the core exhibiting a cubane-like geometry.

Platinum complexes of naphthalene-1,8-dichalcogen and related polyaromatic hydrocarbon ligands.

Platinum bisphosphine complexes bearing dichalcogen-derivatised naphthalene, acenaphthene or phenanthrene ligands have been prepared by either oxidative addition to zero-valent platinum species or from [PtCl(2)(PPhR(2))] (R=Ph or Me) and the disodium or dilithium salts of the parent disulfur, diselenide or mixed S/Se species. The parent naphthalene, acenaphthene and phenanthrene chalcogen compounds were treated with either [Pt(PPh(3))(4)] or [Pt(C(2)H(4))(PMe(3))(2)] (prepared in situ from [PtCl(2)(PMe(3))(2)], ethene and sodium naphthalide or super hydride [LiBEt(3)H]) to give the appropriate platinum(II) species. The dilithium salts of 1,8-E(2)-naphthalene (E=S or Se) prepared in situ by reduction of the E-E bond with [LiBEt(3)H] were treated with [PtCl(2)(PPh(3))(2)] to give [Pt(1,8-E(2)-nap)(PPh(3))(2)]. The tetraoxides [Pt(1,8-(S(O)(2))(2)-nap)(PR(3))(2)] (PR(3)=PPh(3) or PMe(2)Ph) were prepared in a similar metathetical manner from the appropriate [PtCl(2)(PR(3))] complexes and the disodium salt of naphthalene 1,8-disulfinic acid (1,8-(S(O)ONa)(2)-nap). The X-ray structures of selected examples reveal bidentate coordination with the naphthalene-E(2) unit hinged (111-137 degrees) with respect to the coordination plane. The naphthalene ring suffers significant distortion from planarity.

Chlorides, oxochlorides, and oxoacids of 1,8-diphosphanaphthalene: a system with imposed close p...p interaction.

Several new 1,8-diphosphanaphthalene oxochloro compounds and oxoacids were prepared and fully characterized. The new compounds are discussed in the broader context with other known congeners to demonstrate the variability of the diphosphanaphthalene scaffolding's bonding patterns. Three principal modes of interaction of the phosphorus moieties were observed in the series: bonding, bridging, and repulsive, resulting respectively in none, moderate, and substantial crowding and distortions. The unexpected dimeric diphosphaacenaphthene anion has been obtained from disproportionative hydrolysis of Nap(PCl(2))(2) (Nap = naphthalene-1,8-diyl).