Light at the end of the tunnel: FRAP assays combined with super resolution microscopy confirm the presence of a tubular vacuole network in meristematic plant cells.

Plant vacuoles play key roles in cellular homeostasis, performing catabolic and storage functions, and regulating pH and ion balance. Despite their essential role, there is still no consensus on how vacuoles are established. A model proposing that the endoplasmic reticulum is the main contributor of membrane for growing vacuoles in meristematic cells has been challenged by a study proposing that plant vacuoles are formed de novo by homotypic fusion of multivesicular bodies (MVBs). Here, we use the Arabidopsis thaliana root as a model system to provide a systematic overview of successive vacuole biogenesis stages, starting from the youngest cells proximate to the quiescent center. We combine in vivo high- and super-resolution (STED) microscopy to demonstrate the presence of tubular and connected vacuolar structures in all meristematic cells. Using customized fluorescence recovery after photobleaching (FRAP) assays, we establish different modes of connectivity and demonstrate that thin, tubular vacuoles, as observed in cells near the quiescent center, form an interconnected network. Finally, we argue that a growing body of evidence indicates that vacuolar structures cannot originate from MVBs alone but receive membrane material from different sources simultaneously.

Seed longevity is controlled by metacaspases.

To survive extreme desiccation, seeds enter a period of quiescence that can last millennia. Seed quiescence involves the accumulation of protective storage proteins and lipids through unknown adjustments in protein homeostasis (proteostasis). Here, we show that mutation of all six type-II metacaspase (MCA-II) proteases in Arabidopsis thaliana disturbs proteostasis in seeds. MCA-II mutant seeds fail to restrict the AAA ATPase CELL DIVISION CYCLE 48 (CDC48) at the endoplasmic reticulum to discard misfolded proteins, compromising seed storability. Endoplasmic reticulum (ER) localization of CDC48 relies on the MCA-IIs-dependent cleavage of PUX10 (ubiquitination regulatory X domain-containing 10), the adaptor protein responsible for titrating CDC48 to lipid droplets. PUX10 cleavage enables the shuttling of CDC48 between lipid droplets and the ER, providing an important regulatory mechanism sustaining spatiotemporal proteolysis, lipid droplet dynamics, and protein homeostasis. In turn, the removal of the PUX10 adaptor in MCA-II mutant seeds partially restores proteostasis, CDC48 localization, and lipid droplet dynamics prolonging seed lifespan. Taken together, we uncover a proteolytic module conferring seed longevity.

Core-shell nanogels: the effects of morphology, electro- and magnetostatic interactions.

We study the influence of core-shell morphology on the structural characteristics of nanogels. Using computer simulations, we examine three different types of systems, distinguished by their intermonomer interactions: those with excluded volume only; those with charged monomers and excluded volume; and those with excluded volume combined with a certain number of magnetised nanoparticles incorporated within the nanogel. We observe that if the polymers in the shell are short and dense, they tend to penetrate the core. This effect of backfolding is enhanced in charged nanogels, regardless of whether all monomers are charged, or only the core or shell ones. The presence of an experimentally available amount of magnetic nanoparticles in a gel, on the one hand, does not lead to any significant morphological changes. On the other hand, the morphology of the nanogel with magnetic particles has an impact on its magnetic susceptibility. Particular growth of the magnetic response is observed if a long shell of a nanogel is functionalised.

RoPod, a customizable toolkit for non-invasive root imaging, reveals cell type-specific dynamics of plant autophagy.

Arabidopsis root is a classic model system in plant cell and molecular biology. The sensitivity of plant roots to local environmental perturbation challenges data reproducibility and incentivizes further optimization of imaging and phenotyping tools. Here we present RoPod, an easy-to-use toolkit for low-stress live time-lapse imaging of Arabidopsis roots. RoPod comprises a dedicated protocol for plant cultivation and a customizable 3D-printed vessel with integrated microscopy-grade glass that serves simultaneously as a growth and imaging chamber. RoPod reduces impact of sample handling, preserves live samples for prolonged imaging sessions, and facilitates application of treatments during image acquisition. We describe a protocol for RoPods fabrication and provide illustrative application pipelines for monitoring root hair growth and autophagic activity. Furthermore, we showcase how the use of RoPods advanced our understanding of plant autophagy, a major catabolic pathway and a key player in plant fitness. Specifically, we obtained fine time resolution for autophagy response to commonly used chemical modulators of the pathway and revealed previously overlooked cell type-specific changes in the autophagy response. These results will aid a deeper understanding of the physiological role of autophagy and provide valuable guidelines for choosing sampling time during end-point assays currently employed in plant autophagy research.

Thermoprotection by a cell membrane-localized metacaspase in a green alga.

Caspases are restricted to animals, while other organisms, including plants, possess metacaspases (MCAs), a more ancient and broader class of structurally related yet biochemically distinct proteases. Our current understanding of plant MCAs is derived from studies in streptophytes, and mostly in Arabidopsis (Arabidopsis thaliana) with 9 MCAs with partially redundant activities. In contrast to streptophytes, most chlorophytes contain only 1 or 2 uncharacterized MCAs, providing an excellent platform for MCA research. Here we investigated CrMCA-II, the single type-II MCA from the model chlorophyte Chlamydomonas (Chlamydomonas reinhardtii). Surprisingly, unlike other studied MCAs and similar to caspases, CrMCA-II dimerizes both in vitro and in vivo. Furthermore, activation of CrMCA-II in vivo correlated with its dimerization. Most of CrMCA-II in the cell was present as a proenzyme (zymogen) attached to the plasma membrane (PM). Deletion of CrMCA-II by genome editing compromised thermotolerance, leading to increased cell death under heat stress. Adding back either wild-type or catalytically dead CrMCA-II restored thermoprotection, suggesting that its proteolytic activity is dispensable for this effect. Finally, we connected the non-proteolytic role of CrMCA-II in thermotolerance to the ability to modulate PM fluidity. Our study reveals an ancient, MCA-dependent thermotolerance mechanism retained by Chlamydomonas and probably lost during the evolution of multicellularity.

SPIRO - the automated Petri plate imaging platform designed by biologists, for biologists.

Phenotyping of model organisms grown on Petri plates is often carried out manually, despite the procedures being time-consuming and laborious. The main reason for this is the limited availability of automated phenotyping facilities, whereas constructing a custom automated solution can be a daunting task for biologists. Here, we describe SPIRO, the Smart Plate Imaging Robot, an automated platform that acquires time-lapse photographs of up to four vertically oriented Petri plates in a single experiment, corresponding to 192 seedlings for a typical root growth assay and up to 2500 seeds for a germination assay. SPIRO is catered specifically to biologists' needs, requiring no engineering or programming expertise for assembly and operation. Its small footprint is optimized for standard incubators, the inbuilt green LED enables imaging under dark conditions, and remote control provides access to the data without interfering with sample growth. SPIRO's excellent image quality is suitable for automated image processing, which we demonstrate on the example of seed germination and root growth assays. Furthermore, the robot can be easily customized for specific uses, as all information about SPIRO is released under open-source licenses. Importantly, uninterrupted imaging allows considerably more precise assessment of seed germination parameters and root growth rates compared with manual assays. Moreover, SPIRO enables previously technically challenging assays such as phenotyping in the dark. We illustrate the benefits of SPIRO in proof-of-concept experiments which yielded a novel insight on the interplay between autophagy, nitrogen sensing, and photoblastic response.

Interactome of Arabidopsis ATG5 Suggests Functions beyond Autophagy.

Autophagy is a catabolic pathway capable of degrading cellular components ranging from individual molecules to organelles. Autophagy helps cells cope with stress by removing superfluous or hazardous material. In a previous work, we demonstrated that transcriptional upregulation of two autophagy-related genes, ATG5 and ATG7, in Arabidopsis thaliana positively affected agronomically important traits: biomass, seed yield, tolerance to pathogens and oxidative stress. Although the occurrence of these traits correlated with enhanced autophagic activity, it is possible that autophagy-independent roles of ATG5 and ATG7 also contributed to the phenotypes. In this study, we employed affinity purification and LC-MS/MS to identify the interactome of wild-type ATG5 and its autophagy-inactive substitution mutant, ATG5K128R Here we present the first interactome of plant ATG5, encompassing not only known autophagy regulators but also stress-response factors, components of the ubiquitin-proteasome system, proteins involved in endomembrane trafficking, and potential partners of the nuclear fraction of ATG5. Furthermore, we discovered post-translational modifications, such as phosphorylation and acetylation present on ATG5 complex components that are likely to play regulatory functions. These results strongly indicate that plant ATG5 complex proteins have roles beyond autophagy itself, opening avenues for further investigations on the complex roles of autophagy in plant growth and stress responses.

Apoptosis is not conserved in plants as revealed by critical examination of a model for plant apoptosis-like cell death.

BACKGROUND: Animals and plants diverged over one billion years ago and evolved unique mechanisms for many cellular processes, including cell death. One of the most well-studied cell death programmes in animals, apoptosis, involves gradual cell dismantling and engulfment of cellular fragments, apoptotic bodies, through phagocytosis. However, rigid cell walls prevent plant cell fragmentation and thus apoptosis is not applicable for executing cell death in plants. Furthermore, plants are devoid of the key components of apoptotic machinery, including phagocytosis as well as caspases and Bcl-2 family proteins. Nevertheless, the concept of plant "apoptosis-like programmed cell death" (AL-PCD) is widespread. This is largely due to superficial morphological resemblances between plant cell death and apoptosis, and in particular between protoplast shrinkage in plant cells killed by various stimuli and animal cell volume decrease preceding fragmentation into apoptotic bodies. RESULTS: Here, we provide a comprehensive spatio-temporal analysis of cytological and biochemical events occurring in plant cells subjected to heat shock at 40-55 °C and 85 °C, the experimental conditions typically used to trigger AL-PCD and necrotic cell death, respectively. We show that cell death under both conditions was not accompanied by membrane blebbing or formation of apoptotic bodies, as would be expected during apoptosis. Instead, we observed instant and irreversible permeabilization of the plasma membrane and ATP depletion. These processes did not depend on mitochondrial functionality or the presence of Ca2+ and could not be prevented by an inhibitor of ferroptosis. We further reveal that the lack of protoplast shrinkage at 85 °C, the only striking morphological difference between cell deaths induced by 40-55 °C or 85 °C heat shock, is a consequence of the fixative effect of the high temperature on intracellular contents. CONCLUSIONS: We conclude that heat shock-induced cell death is an energy-independent process best matching definition of necrosis. Although the initial steps of this necrotic cell death could be genetically regulated, classifying it as apoptosis or AL-PCD is a terminological misnomer. Our work supports the viewpoint that apoptosis is not conserved across animal and plant kingdoms and demonstrates the importance of focusing on plant-specific aspects of cell death pathways.

Abscisic acid signaling activates distinct VND transcription factors to promote xylem differentiation in Arabidopsis.

Plants display remarkable abilities to adjust growth and development to environmental conditions, such as the amount of available water. This developmental plasticity is apparent not only in root and shoot growth rates, but also in tissue patterning and cell morphology.1,2 We have previously shown that in response to limited water availability, Arabidopsis thaliana root displays changes in xylem morphology, mediated by the non-cell-autonomous action of abscisic acid, ABA.2 Here, we show, through analyses of ABA response reporters and tissue-specific suppression of ABA signaling, that xylem cells themselves act as primary signaling centers governing both xylem cell fate and xylem differentiation rate, revealing the cell-autonomous control of multiple aspects of xylem development by ABA. ABA rapidly activates the expression of genes encoding VASCULAR-RELATED NAC DOMAIN (VND) transcription factors. Molecular and genetic analyses revealed that the two ABA-mediated xylem developmental changes are regulated by distinct members of this transcription factor family, with VND2 and VND3 promoting differentiation rate of metaxylem cells, while VND7 promotes the conversion of metaxylem toward protoxylem morphology. This phenomenon shows how different aspects of developmental plasticity can be interlinked, yet genetically separable. Moreover, similarities in phenotypic and molecular responses to ABA in diverse species indicate evolutionary conservation of the ABA-xylem development regulatory network among eudicots. Hence, this study gives molecular insights into how environmental stress modifies plant vascular anatomy and has potential relevance for water use optimization and adaptation to drought conditions.

Subcellular Localization of Acyl-CoA: Lysophosphatidylethanolamine Acyltransferases (LPEATs) and the Effects of Knocking-Out and Overexpression of Their Genes on Autophagy Markers Level and Life Span of A. thaliana.

Arabidopsis thaliana possesses two acyl-CoA:lysophosphatidylethanolamine acyltransferases, LPEAT1 and LPEAT2, which are encoded by At1g80950 and At2g45670 genes, respectively. Both single lpeat2 mutant and double lpeat1 lpeat2 mutant plants exhibit a variety of conspicuous phenotypes, including dwarfed growth. Confocal microscopic analysis of tobacco suspension-cultured cells transiently transformed with green fluorescent protein-tagged versions of LPEAT1 or LPEAT2 revealed that LPEAT1 is localized to the endoplasmic reticulum (ER), whereas LPEAT2 is localized to both Golgi and late endosomes. Considering that the primary product of the reaction catalyzed by LPEATs is phosphatidylethanolamine, which is known to be covalently conjugated with autophagy-related protein ATG8 during a key step of the formation of autophagosomes, we investigated the requirements for LPEATs to engage in autophagic activity in Arabidopsis. Knocking out of either or both LPEAT genes led to enhanced accumulation of the autophagic adaptor protein NBR1 and decreased levels of both ATG8a mRNA and total ATG8 protein. Moreover, we detected significantly fewer membrane objects in the vacuoles of lpeat1 lpeat2 double mutant mesophyll cells than in vacuoles of control plants. However, contrary to what has been reported on autophagy deficient plants, the lpeat mutants displayed a prolonged life span compared to wild type, including delayed senescence.

Suppression of Metacaspase- and Autophagy-Dependent Cell Death Improves Stress-Induced Microspore Embryogenesis in Brassica napus.

Microspore embryogenesis is a biotechnological process that allows us to rapidly obtain doubled-haploid plants for breeding programs. The process is initiated by the application of stress treatment, which reprograms microspores to embark on embryonic development. Typically, a part of the microspores undergoes cell death that reduces the efficiency of the process. Metacaspases (MCAs), a phylogenetically broad group of cysteine proteases, and autophagy, the major catabolic process in eukaryotes, are critical regulators of the balance between cell death and survival in various organisms. In this study, we analyzed the role of MCAs and autophagy in cell death during stress-induced microspore embryogenesis in Brassica napus. We demonstrate that this cell death is accompanied by the transcriptional upregulation of three BnMCA genes (BnMCA-Ia, BnMCA-IIa and BnMCA-IIi), an increase in MCA proteolytic activity and the activation of autophagy. Accordingly, inhibition of autophagy and MCA activity, either individually or in combination, suppressed cell death and increased the number of proembryos, indicating that both components play a pro-cell death role and account for decreased efficiency of early embryonic development. Therefore, MCAs and/or autophagy can be used as new biotechnological targets to improve in vitro embryogenesis in Brassica species and doubled-haploid plant production in crop breeding and propagation programs.

Oil crops for the future.

Agriculture faces enormous challenges including the need to substantially increase productivity, reduce environmental footprint, and deliver renewable alternatives that are being addressed by developing new oil crops for the future. The efforts include domestication of Lepidium spp. using genomics-aided breeding as a cold hardy perennial high-yielding oil crop that provides substantial environmental benefits, expands the geography for oil crops, and improves farmers' economy. In addition, genetic engineering in Crambe abyssinica may lead to a dedicated industrial oil crop to replace fossil oil. Redirection of photosynthates from starch to oil in plant tubers and cereal endosperm also provides a path for enhancing oil production to meet the growing demands for food, fuel, and biomaterials. Insect pheromone components are produced in seed oil plants in a cost-effective and environmentally friendly pest management replacing synthetically produced pheromones. Autophagy is explored for increasing crop fitness and oil accumulation using genetic engineering in Arabidopsis.

Tandem Tag Assay Optimized for Semi-automated in vivo Autophagic Activity Measurement in Arabidopsis thaliana roots.

Autophagy is the main catabolic process in eukaryotes and plays a key role in cell homeostasis. In vivo measurement of autophagic activity (flux) is a powerful tool for investigating the role of the pathway in organism development and stress responses. Here we describe a significant optimization of the tandem tag assay for detection of autophagic flux in planta in epidermal root cells of Arabidopsis thaliana seedlings. The tandem tag consists of TagRFP and mWasabi fluorescent proteins fused to ATG8a, and is expressed in wildtype or autophagy-deficient backgrounds to obtain reporter and control lines, respectively. Upon autophagy activation, the TagRFP-mWasabi-ATG8a fusion protein is incorporated into autophagosomes and delivered to the lytic vacuole. Ratiometric quantification of the low pH-tolerant TagRFP and low pH-sensitive mWasabi fluorescence in the vacuoles of control and reporter lines allows for a reliable estimation of autophagic activity. We provide a step by step protocol for plant growth, imaging and semi-automated data analysis. The protocol presents a rapid and robust method that can be applied for any studies requiring in planta quantification of autophagic flux.

Remove, Recycle, Degrade: Regulating Plasma Membrane Protein Accumulation.

Interactions between plant cells and the environment rely on modulation of protein receptors, transporters, channels, and lipids at the plasma membrane (PM) to facilitate intercellular communication, nutrient uptake, environmental sensing, and directional growth. These functions are fine-tuned by cellular pathways maintaining or reducing particular proteins at the PM. Proteins are endocytosed, and their fate is decided between recycling and degradation to modulate localization, abundance, and activity. Selective autophagy is another pathway regulating PM protein accumulation in response to specific conditions or developmental signals. The mechanisms regulating recycling, degradation, and autophagy have been studied extensively, yet we are just now addressing their regulation and coordination. Here, we (1) provide context concerning regulation of protein accumulation, recycling, or degradation by overviewing endomembrane trafficking; (2) discuss pathways regulating recycling and degradation in terms of cellular roles and cargoes; (3) review plant selective autophagy and its physiological significance; (4) focus on two decision-making mechanisms: regulation of recycling versus degradation of PM proteins and coordination between autophagy and vacuolar degradation; and (5) identify future challenges.

Chemical Screening Pipeline for Identification of Specific Plant Autophagy Modulators.

Autophagy is a major catabolic process in eukaryotes with a key role in homeostasis, programmed cell death, and aging. In plants, autophagy is also known to regulate agronomically important traits such as stress resistance, longevity, vegetative biomass, and seed yield. Despite its significance, there is still a shortage of reliable tools modulating plant autophagy. Here, we describe the first robust pipeline for identification of specific plant autophagy-modulating compounds. Our screening protocol comprises four phases: (1) high-throughput screening of chemical compounds in cell cultures of tobacco (Nicotiana tabacum); (2) confirmation of the identified hits in planta using Arabidopsis (Arabidopsis thaliana); (3) further characterization of the effect using conventional molecular biology methods; and (4) verification of chemical specificity on autophagy in planta. The methods detailed here streamline the identification of specific plant autophagy modulators and aid in unraveling the molecular mechanisms of plant autophagy.

Surface relief of magnetoactive elastomeric films in a homogeneous magnetic field: molecular dynamics simulations.

The structure of a thin magnetoactive elastomeric (MAE) film adsorbed on a solid substrate is studied by molecular dynamics simulations. Within the adopted coarse-grained approach, a MAE film consists of magnetic particles modeled as soft-core spheres, carrying point dipoles, connected by elastic springs representing a polymer matrix. MAE films containing 20, 25 and 30 vol% of randomly distributed magnetic particles are simulated. Once a magnetic field is applied, the competition between dipolar, elastic and Zeeman forces leads to the restructuring of the layer. The distribution of the magnetic particles as well as elastic strains within the MAE films are calculated for various magnetic fields applied perpendicular to the film surface. It is shown that the surface roughness increases strongly with growing magnetic field. For a given magnetic field, the roughness is larger for the softer polymeric matrix and exhibits a nonmonotonic dependence on the magnetic particle concentration. The obtained results provide a better understanding of the MAE surface structuring as well as possible guidelines for fabrication of MAE films with a tunable surface topology.

Compressibility of ferrofluids: Towards a better understanding of structural properties.

This paper addresses a computational method aimed at obtaining the isothermal compressibility of ferrofluids by means of molecular dynamics (MD) simulations. We model ferrofluids as a system of dipolar soft spheres and carry out MD simulations in the NPT ensemble. The obtained isothermal compressibility computed via volume fluctuations provides us with a strong evidence that dipolar interactions lead to a higher compressibility of dipolar soft sphere systems: the stronger the dipolar interactions, the bigger is the deviation of the compressibility from the one of a system with no dipoles. Furthermore, we use the isothermal compressibility to calculate the structure factor of ferrofluids at low values of wave vectors, i.e. in the range where it is difficult to predict its behaviour because of a problem with accounting for long-range particle correlations that give the main contribution to the structure factor in this range. Our approach based on the interpolation of the structure factor and the computed isothermal compressibility allows us to obtain the smooth structure factor in the range of low wave vectors and the reliable fractal dimension of the clusters formed in the system.