Evaluation of Lab-on-a-Disc Technique Performance for Soil-Transmitted Helminth Diagnosis in Animals in Tanzania.

Soil-transmitted helminth (STH) infections are caused by roundworms, hookworms, whipworms, and thread worms. Accurate diagnosis is essential for effective treatment, prevention, and control of these infections. This study evaluates a new diagnostic method called Single-image Parasite Quantification (SIMPAQ), which uses a lab-on-a-disc (LoD) technique to isolate STH eggs into a single imaging zone for digital analysis. The study evaluates the purification performance of the SIMPAQ technique for detecting STH eggs in animal samples. This was a cross-sectional study conducted among 237 pigs and 281 dogs in the Morogoro region in Tanzania. Faecal samples were collected and processed with the LoD technique, as well as flotation and McMaster (McM) methods for comparison purposes. The overall prevalence of STH infections was high as per the LoD technique (74%), followed by McM (65.44%) and flotation (65.04%). Moreover, the overall performance of the LoD technique, using McM as the gold standard, was 93.51% (sensitivity), 60.89% (specificity), 81.91% (PPV), and 83.21% (NPV). The LoD technique exhibited high prevalence, sensitivity, and NPV, which demonstrates its value for STH egg detection and its crucial role in the era of accurate STH diagnosis, promoting proper management of the infection.

Enhancing the Yield of a Lab-on-a-Disk-Based Single-Image Parasite Quantification Device.

The recently proposed single-image parasite quantification (SIMPAQ) platform based on a Lab-on-a-Disc (LOD) device was previously successfully tested in field conditions, demonstrating its efficiency in soil-transmitted helminth (STH) egg detection and analysis on the level delivered by the current state-of-the-art methods. Furthermore, the SIMPAQ provides relatively quick diagnostics and requires small amounts of sample and materials. On the other hand, in a recent related study, it was revealed that the performance of the SIMPAQ method can be limited due to the action of the tangential Euler and Coriolis forces, and the interaction of the moving eggs with the walls of the LOD chamber. Here, we propose a new improved design that allows us to overcome these limitations and enhance the yield of the SIMPAQ LOD device, as demonstrated in experiments with a synthetic particle model system and real parasite eggs. Despite the simplicity, the proposed design modification is demonstrated to allow a substantial improvement in the yield of the SIMPAQ device, i.e., above 90% of parasite eggs and 98% of synthetic model particles were transported to the field of view. The new design proposed here will be further examined in the new generation of SIMPAQ devices within ongoing research on STH egg detection in field conditions.

Selecting active matter according to motility in an acoustofluidic setup: self-propelled particles and sperm cells.

Active systems - including sperm cells, living organisms like bacteria, fish, birds, or active soft matter systems like synthetic "microswimmers" - are characterized by motility, i.e., the ability to propel using their own "engine". Motility is the key feature that distinguishes active systems from passive or externally driven systems. In a large ensemble, motility of individual species can vary in a wide range. Selecting active species according to their motility represents an exciting and challenging problem. We propose a new method for selecting active species based on their motility using an acoustofluidic setup where highly motile species escape from the acoustic trap. This is demonstrated in simulations and in experiments with self-propelled Janus particles and human sperm. The immediate application of this method is selecting highly motile sperm for medically assisted reproduction (MAR). Due to the tunable acoustic trap, the proposed method is more flexible than the existing passive microfluidic methods. The proposed selection method based on motility can also be applied to other active systems that require selecting highly motile species or removing immotile species.

Narrow Pore Crossing of Active Particles under Stochastic Resetting.

We propose a two-dimensional model of biochemical activation process, whereby self-propelling particles of finite correlation times are injected at the center of a circular cavity with constant rate equal to the inverse of their lifetime; activation is triggered when one such particle hits a receptor on the cavity boundary, modeled as a narrow pore. We numerically investigated this process by computing the particle mean-first exit times through the cavity pore as a function of the correlation and injection time constants. Due to the breach of the circular symmetry associated with the positioning of the receptor, the exit times may depend on the orientation of the self-propelling velocity at injection. Stochastic resetting appears to favor activation for large particle correlation times, where most of the underlying diffusion process occurs at the cavity boundary.

Rail configuration for lateral particle transport across intact co-flows: effect of wall and rail geometry on liquid and particle transport.

Layer-by-Layer coating technology is of great importance for many applications of microparticles whereby exposure of the particles to various reagents is needed. Mutual contamination of the reagents during this process is a key challenge, and this undesired effect should be avoided. Here we introduce a device that provides subsequent exposure of particles to various liquids and minimizes mixing of the liquids at the same time. The key element of the device is a rail (groove) at the bottom of a microfluidic channel. The rail forms an angle (between 0 and 90 degrees) and thus enables passive transport of particles through the intact co-flows of the different fluids. To avoid the undesirable effect of reagent stream mixing, internal walls are introduced to separate the different flows. Various designs of the proposed device are considered, and their performance is experimentally analyzed.

High Specificity but Low Sensitivity of Lab-on-a-Disk Technique in Detecting Soil-Transmitted Helminth Eggs among Pre- and School-Aged Children in North-Western Tanzania.

An estimated 1.5 billion people are infected with soil-transmitted helminths (hookworms, Ascaris lumbricoides and Trichuris trichiura). These infections are targeted for elimination by the World Health Organization (WHO) by 2030, with the main interventions being mass drug administration using albendazole or mebendazole. Tanzania is one of the endemic countries; it has been implementing MDA to school-aged children for more than a decade and the infection prevalence and intensity of infection have declined. Thus, at this point, the monitoring and evaluation of infection prevalence and intensity of infections, and assessing drug efficacy is crucial and requires accurate diagnostic tests. The currently used standard diagnostic test, the Kato-Katz (KK) technique, has several limitations and the WHO is calling for the development and evaluation of new diagnostic tests. The Lab-on-a-disk (LOD) was developed and tested in the endemic areas of north-western Tanzania to evaluate its sensitivity and specificity using KK and the formol-ether concentration technique. The results showed that when using a duplicate KK slide, the LOD had a sensitivity and specificity of 37.2% (95% CI: 30.7-43.9) and 67.3% (95% CI: 63.1-71.3%). Using four KK slides as a standard technique, the overall sensitivity and specificity were 37.7% (95% CI: 33.1-42.6) and 70.7% (95% CI: 65.5-75.6). The LOD attained high specificity but low sensitivity especially in detecting eggs of Trichuris trichiura. The LOD technique has potential as a promising diagnostic test, but its sensitivity still requires improvement.

Rail induced lateral migration of particles across intact co-flowing liquids.

This paper presents a rail guided method to apply a Layer-by-Layer (LbL) coating on particles in a microfluidic device. The passive microfluidic approach allows handling suspensions of particles to be coated in the system. The trajectory of the particles is controlled using engraved rails, inducing lateral movement of particles while keeping the axially oriented liquid flow (and the interface of different liquids) undisturbed. The depth and angle of the rails together with the liquid velocity were studied to determine a workable geometry of the device. A discontinuous LbL coating procedure was converted into one continuous process, demonstrating that the chip can perform seven consecutive steps normally conducted in batch operation, further easily extendable to larger cycle numbers. Coating of the particles with two bilayers was confirmed by fluorescence microscopy.

Migration Behavior of Low-Density Particles in Lab-on-a-Disc Devices: Effect of Walls.

The effect of the lateral walls of a Lab-On-a-Disc device on the dynamics of a model system of particles with a density lower than that of the solvent (modelling parasites eggs) is analyzed theoretically and experimentally. In the absence of lateral walls, a particle always moves in the direction of the centrifugal force, while its trajectory is deflected in the tangential direction by the inertial Coriolis and Euler forces. Lateral walls, depending on the angle forming with the radial direction, can guide the particle either in the same or in the opposite direction to the centrifugal force, thus resulting in unusual particle trajectories including zig-zag or backwards particle motion. The effect is pronounced in the case of short operation times when the acceleration of the angular rotation, and thus the Euler force, is considerable. The predicted unusual motion is demonstrated by numerically solving the equation of motion in the presence of lateral walls and verified in the experiment with particles of density lower than that of the solvent. Our analysis is useful for design and operational considerations of Lab-On-a-Disc devices aiming for or involving (bio)particle handling.

Anisotropic Diffusion in Driven Convection Arrays.

We numerically investigate the transport of a Brownian colloidal particle in a square array of planar counter-rotating convection rolls at high Péclet numbers. We show that an external force produces huge excess peaks of the particle's diffusion constant with a height that depends on the force orientation and intensity. In sharp contrast, the particle's mobility is isotropic and force independent. We relate such a nonlinear response of the system to the advection properties of the laminar flow in the suspension fluid.

Enhanced motility in a binary mixture of active nano/microswimmers.

It is often desirable to enhance the motility of active nano- or microscale swimmers such as, e.g., self-propelled Janus particles as agents of chemical reactions or weak sperm cells for better chances of successful fertilization. Here we tackle this problem based on the idea that motility can be transferred from a more active guest species to a less active host species. We performed numerical simulations of motility transfer in two typical cases, namely for interacting particles with a weak inertia effect, by analyzing their velocity distributions, and for interacting overdamped particles, by studying their effusion rate. In both cases, we detected motility transfer with a motility enhancement of the host species of up to a factor of four. This technique of motility enhancement can find applications in chemistry, biology and medicine.

High-Motility Visible Light-Driven Ag/AgCl Janus Micromotors.

Visible light-driven nano/micromotors are promising candidates for biomedical and environmental applications. This study demonstrates blue light-driven Ag/AgCl-based spherical Janus micromotors, which couple plasmonic light absorption with the photochemical decomposition of AgCl. These micromotors reveal high motility in pure water, i.e., mean squared displacements (MSD) reaching 800 µm2 within 8 s, which is 100× higher compared to previous visible light-driven Janus micromotors and 7× higher than reported ultraviolet (UV) light-driven AgCl micromotors. In addition to providing design rules to realize efficient Janus micromotors, the complex dynamics revealed by individual and assemblies of Janus motors is investigated experimentally and in simulations. The effect of suppressed rotational diffusion is focused on, compared to UV light-driven AgCl micromotors, as a reason for this remarkable increase of the MSD. Moreover, this study demonstrates the potential of using visible light-driven plasmonic Ag/AgCl-based Janus micromotors in human saliva, phosphate-buffered saline solution, the most common isotonic buffer that mimics the environment of human body fluids, and Rhodamine B solution, which is a typical polluted dye for demonstrations of photocatalytic environmental remediation. This new knowledge is useful for designing visible light driven nano/micromotors based on the surface plasmon resonance effect and their applications in assays relevant for biomedical and ecological sciences.

Visible Light Actuated Efficient Exclusion Between Plasmonic Ag/AgCl Micromotors and Passive Beads.

Insight is provided into the collective behavior of visible-light photochemically driven plasmonic Ag/AgCl Janus particles surrounded by passive polystyrene (PS) beads. The active diffusion of single Janus particles and their clusters (small: consisting of two or three Janus particles and large: consisting of more than ten Janus particles), and their interaction with passive PS beads, are analyzed experimentally and in simulations. The diffusivity of active Janus particles, and thus the exclusive effect to passive PS beads, can be regulated by the number of single Janus particles in the cluster. On the simulation side, the Langevin equations of motion for self-propelled Janus particles and diffusing passive PS beads are numerically solved using Molecular-Dynamics simulations. The complex interactions of both subsystems, including elastic core-to-core interactions, short-range attraction, and effective repulsion due to light-induced chemical reactions are considered. This complex mixed system not only provides insight to the interactive effect between active visible light-driven self-propelled micromotors and passive beads, but also offers promise for implications in light-controlled propulsion transport and chemical sensing.

Colloidal transport through trap arrays controlled by active microswimmers.

We investigate the dynamics of a binary mixture consisting of active and passive colloidal particles diffusing in a 2D array of truncated harmonic wells, or traps. We explore the possibility of using a small fraction of active particles to manipulate a much larger fraction of passive particles, for instance, to confine them in or extract them from the traps. The results of our study have potential application in biology and medical sciences, for example, to remove dead cells or undesired contaminants from biological systems by means of self-propelled nano-robots.

Artificial living crystals in confined environment.

Similar to the spontaneous formation of colonies of bacteria, flocks of birds, or schools of fish, "living crystals" can be formed by artificial self-propelled particles such as Janus colloids. Unlike usual solids, these "crystals" are far from thermodynamic equilibrium. They fluctuate in time forming a crystalline structure, breaking apart and re-forming again. We propose a method to stabilize living crystals by applying a weak confinement potential that does not suppress the ability of the particles to perform self-propelled motion, but it stabilizes the structure and shape of the dynamical clusters. This gives rise to such configurations of living crystals as "living shells" formed by Janus colloids. Moreover, the shape of the stable living clusters can be controlled by tuning the potential strength. Our proposal can be verified experimentally with either artificial microswimmers such as Janus colloids, or with living active matter.

Confined Catalytic Janus Swimmers in a Crowded Channel: Geometry-Driven Rectification Transients and Directional Locking.

Self-propelled Janus particles, acting as microscopic vehicles, have the potential to perform complex tasks on a microscopic scale, suitable, e.g., for environmental applications, on-chip chemical information processing, or in vivo drug delivery. Development of these smart nanodevices requires a better understanding of how synthetic swimmers move in crowded and confined environments that mimic actual biosystems, e.g., network of blood vessels. Here, the dynamics of self-propelled Janus particles interacting with catalytically passive silica beads in a narrow channel is studied both experimentally and through numerical simulations. Upon varying the area density of the silica beads and the width of the channel, active transport reveals a number of intriguing properties, which range from distinct bulk and boundary-free diffusivity at low densities, to directional "locking" and channel "unclogging" at higher densities, whereby a Janus swimmer is capable of transporting large clusters of passive particles.

Structural transitions and long-time self-diffusion of interacting colloids confined by a parabolic potential.

We report on the ordering and dynamics of interacting colloidal particles confined by a parabolic potential. By means of Brownian dynamics simulations, we find that by varying the magnitude of the trap stiffness, it is possible to control the dimension of the system and, thus, explore both the structural transitions and the long-time self-diffusion coefficient as a function of the degree of confinement. We particularly study the structural ordering in the directions perpendicular and parallel to the confinement. Further analysis of the local distribution of the first-neighbors layer allows us to identify the different structural phases induced by the parabolic potential. These results are summarized in a structural state diagram that describes the way in which the colloidal suspension undergoes a structural re-ordering while increasing the confinement. To fully understand the particle dynamics, we take into account hydrodynamic interactions between colloids; the parabolic potential constricts the available space for the colloids, but it does not act on the solvent. Our findings show a non-linear behavior of the long-time self-diffusion coefficient that is associated to the structural transitions induced by the external field.

Self-propelled Janus particles in a ratchet: numerical simulations.

Brownian transport of self-propelled overdamped microswimmers (like Janus particles) in a two-dimensional periodically compartmentalized channel is numerically investigated for different compartment geometries, boundary collisional dynamics, and particle rotational diffusion. The resulting time-correlated active Brownian motion is subject to rectification in the presence of spatial asymmetry. We prove that ratcheting of Janus particles can be orders of magnitude stronger than for ordinary thermal potential ratchets and thus experimentally accessible. In particular, autonomous pumping of a large mixture of passive particles can be induced by just adding a small fraction of Janus particles.

Nonuniform self-organized dynamical states in superconductors with periodic pinning.

We consider magnetic flux moving in superconductors with periodic pinning arrays. We show that sample heating by moving vortices produces negative differential resistivity (NDR) of both N and S type (i.e., N- and S-shaped) in the voltage-current characteristic (VI curve). The uniform flux flow state is unstable in the NDR region of the VI curve. Domain structures appear during the NDR part of the VI curve of an N type, while a filamentary instability is observed for the NDR of an S type. The simultaneous existence of the NDR of both types gives rise to the appearance of striking self-organized (both stationary and nonstationary) two-dimensional dynamical structures.