Chemically recyclable polyolefin-like multiblock polymers.

Polyolefins are the most important and largest volume plastics produced. Unfortunately, the enormous use of plastics and lack of effective disposal or recycling options have created a plastic waste catastrophe. In this work, we report an approach to create chemically recyclable polyolefin-like materials with diverse mechanical properties through the construction of multiblock polymers from hard and soft oligomeric building blocks synthesized with ruthenium-mediated ring-opening metathesis polymerization of cyclooctenes. The multiblock polymers exhibit broad mechanical properties, spanning elastomers to plastomers to thermoplastics, while integrating a high melting transition temperature (Tm) and low glass transition temperature (Tg), making them suitable for use across diverse applications (Tm as high as 128°C and Tg as low as -60°C). After use, the different plastics can be combined and efficiently deconstructed back to the fundamental hard and soft building blocks for separation and repolymerization to realize a closed-loop recycling process.

Halide Noninnocence and Direct Photoreduction of Ni(II) Enables Coupling of Aryl Chlorides in Dual Catalytic, Carbon-Heteroatom Bond-Forming Reactions.

Recent mechanistic studies of dual photoredox/Ni-catalyzed, light-driven cross-coupling reactions have found that the photocatalyst (PC) operates through either reductive quenching or energy transfer cycles. To date, reports invoking oxidative quenching cycles are comparatively rare and direct observation of such a quenching event has not been reported. However, when PCs with highly reducing excited states are used (e.g., Ir(ppy)3), photoreduction of Ni(II) to Ni(I) is thermodynamically feasible. Recently, a unified reaction system using Ir(ppy)3 was developed for forming C-O, C-N, and C-S bonds under the same conditions, a prospect that is challenging with PCs that can photooxidize these nucleophiles. Herein, in a detailed mechanistic study of this system, we observe oxidative quenching of the PC (Ir(ppy)3 or a phenoxazine) via nanosecond transient absorption spectroscopy. Speciation studies support that a mixture of Ni-bipyridine complexes forms under the reaction conditions, and the rate constant for photoreduction increases when more than one ligand is bound. Oxidative addition of an aryl iodide was observed indirectly via oxidation of the resulting iodide by Ir(IV)(ppy)3. Intriguingly, the persistence of the Ir(IV)/Ni(I) ion pair formed in the oxidative quenching step was found to be necessary to simulate the observed kinetics. Both bromide and iodide anions were found to reduce the oxidized form of the PC back to its neutral state. These mechanistic insights inspired the addition of a chloride salt additive, which was found to alter Ni speciation, leading to a 36-fold increase in the initial turnover frequency, enabling the coupling of aryl chlorides.

Effects of the Chalcogenide Identity in N-Aryl Phenochalcogenazine Photoredox Catalysts.

Phenochalcogenazines such as phenoxazines and phenothiazines have been widely employed as photoredox catalysts (PCs) in small molecule and polymer synthesis. However, the effect of the chalcogenide in these catalysts has not been fully investigated. In this work, a series of four phenochalcogenazines is synthesized to understand how the chalcogenide impacts catalyst properties and performance. Increasing the size of the chalcogenide is found to distort the PC structure, ultimately impacting the properties of each PC. For example, larger chalcogenides destabilize the PC radical cation, possibly resulting in catalyst degradation. In addition, PCs with larger chalcogenides experience increased reorganization during electron transfer, leading to slower electron transfer. Ultimately, catalyst performance is evaluated in organocatalyzed atom transfer radical polymerization and a photooxidation reaction for C(sp2)-N coupling. Results from these experiments highlight that a balance of PC properties is most beneficial for catalysis, including a long-lived excited state, a stable radical cation, and a low reorganization energy.

Removal of photoredox catalysts from polymers synthesized by organocatalyzed atom transfer radical polymerization.

Organocatalyzed atom transfer radical polymerization (O-ATRP) is a method of producing polymers with precise structures under mild conditions using organic photoredox catalysts (PCs). Due to the unknown toxicity of PCs and their propensity to introduce color in polymers synthesized by this method, removal of the PC from the polymer product can be important for certain applications of polymers produced using O-ATRP. Current purification methods largely rely on precipitation to remove the PC from the polymer, but a more effective and efficient purification method is needed. In this work, an alternative purification method relying on oxidation of the PC to PC · + followed by filtration through a plug to remove PC · + from the polymer and removal of the volatiles was developed. A range of chemical oxidants and stationary phases were tested for their ability to remove PCs from polymers, revealing chemical oxidation by N-bromosuccinimide followed by a filtration through a silica plug can remove up to 99% of the PC from poly(methyl methacrylate). Characterization of the polymer before and after purification demonstrated that polymer molecular weight, dispersity, and chain-end fidelity are not signficantly impacted by this purification method. Finally, this purification method was tested on a range of dihydrophenazine, phenoxazine, dihydroacridines, and phenothiazine PCs, revealing the strength of the chemical oxidant must match the oxidation potential of the PC for effective purification.

Photoinduced Organocatalyzed Atom Transfer Radical Polymerization (O-ATRP): Precision Polymer Synthesis Using Organic Photoredox Catalysis.

The development of photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) has received considerable attention since its introduction in 2014. Expanding on many of the advantages of traditional ATRP, O-ATRP allows well-defined polymers to be produced under mild reaction conditions using organic photoredox catalysts. As a result, O-ATRP has opened access to a range of sensitive applications where the use of a metal catalyst could be of concern, such as electronics, certain biological applications, and the polymerization of coordinating monomers. However, key limitations of this method remain and necessitate further investigation to continue the development of this field. As such, this review details the achievements made to-date as well as future research directions that will continue to expand the capabilities and application landscape of O-ATRP.

Bioinspired Threonine-Based Polymers with Potent Ice Recrystallization Inhibition Activity.

Ice growth mitigation is a pervasive challenge for multiple industries. In nature, ice-binding proteins (IBPs) demonstrate potent ice growth prevention through ice recrystallization inhibition (IRI). However, IBPs are expensive, difficult to produce in large quantities, and exhibit minimal resilience to nonphysiological environmental stressors, such as pH. For these reasons, researchers have turned to bioinspired polymeric materials that mimic IBP behavior. To date, however, no synthetic polymer has rivaled the ability of native IBPs to display IRI activity at ultralow nanomolar concentrations. In this work, we study the IRI activity of peptides and polypeptides inspired by common ice-binding residues of IBPs to inform the synthesis and characterization of a potent bioinspired polymer that mimics IBP behavior. We show first that the threonine polypeptide (pThr) displays the best IRI activity in phosphate-buffered saline (PBS). Second, we use pThr as a molecular model to synthesize and test a bioinspired polymer, poly(2-hydroxypropyl methacrylamide) (pHPMA). We show that pHPMA exhibits potent IRI activity in neutral PBS at ultralow concentrations (0.01 mg/mL). pHPMA demonstrates potent IRI activity at low molecular weights (2.3 kDa), with improved activity at higher molecular weights (32.8 kDa). These results substantiate that pHPMA is a robust molecule that mitigates ice crystal growth at concentrations similar to native IBPs.

Radical Addition to N,N-Diaryl Dihydrophenazine Photoredox Catalysts and Implications in Photoinduced Organocatalyzed Atom Transfer Radical Polymerization.

Photoinduced organocatalyzed atom transfer radical polymerization (O-ATRP) is a controlled radical polymerization methodology catalyzed by organic photoredox catalysts (PCs). In an efficient O-ATRP system, good control over molecular weight with an initiator efficiency (I* = M n,theo/M n,exp × 100%) near unity is achieved, and the synthesized polymers possess a low dispersity (D). N,N-Diaryl dihydrophenazine catalysts typically produce polymers with low dispersity (D < 1.3) but with less than unity molecular weight control (I* ~ 60-80%). This work explores the termination reactions that lead to decreased control over polymer molecular weight and identifies a reaction leading to radical addition to the phenazine core. This reaction can occur with radicals generated through reduction of the ATRP initiator or the polymer chain end. In addition to causing a decrease in I*, this reactivity modifies the properties of the PC, ultimately impacting polymerization control in O-ATRP. With this insight in mind, a new family of core-substituted N,N-diaryl dihydrophenazines is synthesized from commercially available ATRP initiators and employed in O-ATRP. These new core-substituted PCs improve both I* and D in the O-ATRP of MMA, while minimizing undesired side reactions during the polymerization. Further, the ability of one core-substituted PC to operate at low catalyst loadings is demonstrated, with minimal loss of polymerization control down to 100 ppm (weight average molecular weight [M w] = 10.8 kDa, D = 1.17, I* = 104% vs M w = 8.26, D = 1.10, I* = 107% at 1000 ppm) and signs of a controlled polymerization down to 10 ppm of the catalyst (M w = 12.1 kDa, D = 1.36, I* = 107%).

Radical Cations of Phenoxazine and Dihydrophenazine Photoredox Catalysts and Their Role as Deactivators in Organocatalyzed Atom Transfer Radical Polymerization.

Radical cations of photoredox catalysts used in organocatalyzed atom transfer radical polymerization (O-ATRP) have been synthesized and investigated to gain insight into deactivation in O-ATRP. The stability and reactivity of these compounds were studied in two solvents, N,N-dimethylacetamide and ethyl acetate, to identify possible side reactions in O-ATRP and to investigate the ability of these radical cations to deactivate alkyl radicals. A number of other factors that could influence deactivation in O-ATRP were also probed, such as ion pairing with the radical cations, radical cation oxidation potential, and halide oxidation potential. Ultimately, these studies enabled radical cations to be employed as reagents during O-ATRP to demonstrate improvements in polymerization control with increasing radical cation concentrations. In the polymerization of acrylates, this approach enabled superior molecular weight control, a decrease in polymer dispersity from 1.90 to 1.44, and an increase in initiator efficiency from 78 to 102%. This work highlights the importance of understanding the mechanism and side reactions of O-ATRP, as well as the importance of catalyst radical cations for successful O-ATRP.

Synthesis, Characterization, and Reactivity of N-Alkyl Phenoxazines in Organocatalyzed Atom Transfer Radical Polymerization.

Core-modified N-alkyl phenoxazines were synthesized and evaluated as photoredox catalysts (PCs) in organocatalyzed atom transfer radical polymerization (O-ATRP). Each PC was characterized and found to strongly absorb UVA and visible light, undergo reversible oxidation to radical cation species, and exhibit high quantum yields of fluorescence (Φf > 77%). PCs found to exhibit intramolecular charge transfer in their excited state were capable of the controlled synthesis of poly(methyl methacrylate) with good molecular weight control (I* ~ 100%) and moderately low dispersity (D < 1.30).

Interrogation of O-ATRP Activation Conducted by Singlet and Triplet Excited States of Phenoxazine Photocatalysts.

Organocatalyzed ATRP (O-ATRP) is a growing field exploiting organic chromophores as photoredox catalysts (PCs) that engage in dissociative electron-transfer (DET) activation of alkyl-halide initiators following absorption of light. Characterizing DET rate coefficients (kact) and photochemical yields across various reaction conditions and PC photophysical properties will inform catalyst design and efficient use during polymerization. The studies described herein consider a class of phenoxazine PCs, where synthetic handles of core substitution and N-aryl substitution enable tunability of the electronic and spin characters of the catalyst excited state as well as DET reaction driving force (ΔGET0). Using Stern-Volmer quenching experiments through variation of the diethyl 2-bromo-2-methylmalonate (DBMM) initiator concentration, collisional quenching is observed. Eight independent measurements of kact are reported as a function of ΔGET0 for four PCs: four triplet reactants and four singlets with kact values ranging from 1.1 × 108 M-1 s-1, where DET itself controls the rate, to 4.8 × 109 M-1 s-1, where diffusion is rate-limiting. This overall data set, as well as a second one inclusive of five literature values from related systems, is readily modeled with only a single parameter of reorganization energy under the frameworks of the adiabatic Marcus electron-transfer theory and Marcus-Savéant theory of DET. The results provide a predictive map where kact can be estimated if ΔGET0 is known and highlight that DET in these systems appears insensitive to PC reactant electronic and spin properties outside of their impact on the driving force. Next, on the basis of measured kact values in selected PC systems and knowledge of their photophysics, we also consider activation yields specific to the reactant spin states as the DBMM initiator concentration is varied. In N-naphthyl-containing PCs characterized by near-unity intersystem crossing, the T1 is certainly an important driver for efficient DET. However, at DBMM concentrations common to polymer synthesis, the S1 is also active and drives 33% of DET reaction events. Even in systems with low yields of ISC, such as in N-phenyl-containing PCs, reaction yields can be driven to useful values by exploiting the S1 under high DBMM concentration conditions. Finally, we have quantified photochemical reaction quantum yields, which take into account potential product loss processes after electron-transfer quenching events. Both S1 and T1 reactant states produce the PC•+ radical cation with a common yield of 71%, thus offering no evidence for spin selectivity in deleterious back electron transfer. The subunity PC•+ yields suggest that some combination of solvent (DMAc) oxidation and energy-wasting back electron transfer is likely at play and these pathways should be factored in subsequent mechanistic considerations.

Organocatalyzed Birch Reduction Driven by Visible Light.

The Birch reduction is a powerful synthetic methodology that uses solvated electrons to convert inert arenes to 1,4-cyclohexadienes-valuable intermediates for building molecular complexity. Birch reductions traditionally employ alkali metals dissolved in ammonia to produce a solvated electron for the reduction of unactivated arenes such as benzene (Ered < -3.42 V vs SCE). Photoredox catalysts have been gaining popularity in highly reducing applications, but none have been reported to demonstrate reduction potentials powerful enough to reduce benzene. Here, we introduce benzo[ghi]perylene imides as new organic photoredox catalysts for Birch reductions performed at ambient temperature and driven by visible light from commercially available LEDs. Using low catalyst loadings (<1 mol percent), benzene and other functionalized arenes were selectively transformed to 1,4-cyclohexadienes in moderate to good yields in a completely metal-free reaction. Mechanistic studies support that this unprecedented visible-light-induced reactivity is enabled by the ability of the organic photoredox catalyst to harness the energy from two visible-light photons to affect a single, high-energy chemical transformation.

Scalable and Phosphine-Free Conversion of Alcohols to Carbon-Heteroatom Bonds through the Blue Light-Promoted Iodination Reaction.

One of the fundamental and highly valuable transformations in organic chemistry is the nucleophilic substitution of alcohols. Traditionally, these reactions require strategies that employ stoichiometric hazardous reagents and are associated with difficulty in purification of the by-products. To overcome these challenges, here, we report a simple route toward the diverse conversion of alcohols via an SN2 pathway, in which blue light-promoted iodination is used to form alkyl iodide intermediates from simple unreactive alcohols. The scope of the process tolerates a range of nucleophiles to construct C-N, C-O, C-S, and C-C bonds. Furthermore, we also demonstrate that this method can be used for the preparation and late-stage functionalization of pharmaceuticals, as highlighted by the syntheses of thiocarlide, butoxycaine, and pramoxine.

Designing High-Triplet-Yield Phenothiazine Donor-Acceptor Complexes for Photoredox Catalysis.

Phenothiazine, owing to its ease of oxidation and modularity with respect to facile functionalization, is an attractive central chemical unit from which to construct highly reducing organic photoredox catalysts. While design improvements have been made in the community, the yield of intersystem crossing (ΦISC), which determines access to the long-lived triplet excited state, has yet to be systematically optimized. Herein, we explore the impacts of N-aryl substituent variation on excited-state dynamics using picosecond to millisecond transient absorption and emission spectroscopies. Design principles are uncovered that center on controlling the energy of an intermediate charge transfer (CT) state within the singlet excited-state manifold, which, in turn, dictates the yield of CT-state formation and the rate constants for its depletion. Ultimately, we find ΦISC to be highly sensitive to the electron-withdrawing character of the N-aryl electron acceptor in the aforementioned CT state, with ΦISC ranging from ∼0 to 0.96.

Bromine Radical Catalysis by Energy Transfer Photosensitization.

We report here a mild, safe, and user-friendly bromine radical catalysis system that enables efficient [3 + 2] cycloaddition of diversely substituted vinyl- and ethynylcyclopropanes with a broad range of alkenes, including drug-like molecules and pharmaceuticals. Key to the success is the use of photosensitizing triplet-state ß-fragmentation of a judiciously selected precatalyst, cinnamyl bromide, to generate bromine radicals in a controlled manner using parts per million-level photocatalyst (i.e., 4CzIPN) loading.

Organocatalyzed Photoredox Radical Ring-Opening Polymerization of Functionalized Vinylcyclopropanes.

Organocatalyzed photoredox radical ring-opening polymerization (rROP) of vinylcyclopropanes (VCPs) is employed for the synthesis of polymers with controlled molecular weight (MW), dispersity, and composition. Herein, we report the study on the rROP of a variety of VCP monomers bearing diverse functional groups (such as amide, alkene, ketal, urea, hemiaminal ether, and so on) under organocatalyzed conditions with varying light sources and temperature. Notably, VCP monomers bearing natural product functionality or their derivatives can be polymerized in a controlled manner to produce poly(VCPs) with predictable MW, low dispersity, tunable composition, high thermal stability, and tailored glass transition temperature (T g), ranging 39 to 107 °C. Lastly, successful "grafting through" synthesis of molecular brush copolymers containing 1.0 or 5.0 kDa polydimethylsiloxane (PDMS) side chains from readily accessible EtVCP-PDMS macromonomers further demonstrates the robustness of this organocatalyzed photoredox rROP.

Solvent Effects and Side Reactions in Organocatalyzed Atom Transfer Radical Polymerization for Enabling the Controlled Polymerization of Acrylates Catalyzed by Diaryl Dihydrophenazines.

Investigation of the effects of a solvent on the photophysical and redox properties of the photoredox catalyst (PC), N,N-di(2-naphthyl)-5,10-dihydrophenazine (PC 1), revealed the opportunity to use tetrahydrofuran (THF) to modulate the reactivity of PC 1 toward achieving a controlled organocatalyzed atom transfer radial polymerization (O-ATRP) of acrylates. Compared with dimethylacetamide (DMAc), in tetrahydrofuran (THF), PC 1 exhibits a higher quantum yield of intersystem crossing (ΦISC = 0.02 in DMAc, 0.30 in THF), a longer singlet excited-state lifetime (τ Singlet = 3.81 ns in DMAc, 21.5 ns in THF), and a longer triplet excited-state lifetime (τ Triplet = 4.3 µs in DMAc, 15.2 µs in THF). Destabilization of 1 •+, the proposed polymerization deactivator, in THF leads to an increase in the oxidation potential of this species by 120 mV (E 1/2 0 = 0.22 V vs SCE in DMAc, 0.34 V vs SCE in THF). The O-ATRP of n-butyl acrylate (n-BA) catalyzed by PC 1 proceeds in a more controlled fashion in THF than in DMAc, producing P(n-BA) with low dispersity, D (D < 1.2). Model reactions and spectroscopic experiments revealed that two initiator-derived alkyl radicals add to the core of PC 1 to form an alkyl-substituted photocatalyst (2) during the polymerization. PC 2 accesses a polar CT excited state that is ~40 meV higher in energy than PC 1 and forms a slightly more oxidizing radical cation (E 1/2 0 = 0.22 V for 1 •+ and 0.25 V for 2 •+ in DMAc). A new O-ATRP procedure was developed wherein PC 1 is converted to 2 in situ. The application of this method enabled the O-ATRP of a number of acrylates to proceed with moderate to good control (D = 1.15-1.45 and I* = 83-127%).

Impacts of Performing Electrolysis During Organocatalyzed Atom Transfer Radical Polymerization.

An electrochemical variant of organocatalyzed atom transfer radical polymerization (O-ATRP) is developed and investigated. Inspired by electrochemically mediated atom transfer radical polymerization (eATRP), potentiostatic electrolysis is used to manipulate the catalyst's redox states in O-ATRP to understand whether deactivation in O-ATRP can be enhanced to improve polymerization control. During the course of this work, several possible side reactions are investigated, and the electrochemical apparatus is optimized to reduce side reactions at the counter electrode. This electrochemically modified O-ATRP method (eO-ATRP) is then studied at different applied potentials, under different irradiation conditions, and with two photoredox catalysts to understand the impact of electrolysis on polymerization control. Ultimately, although electrolysis was successfully used to improve polymerization control in O-ATRP, some additional challenges have been identified. Several key questions are postulated to guide future work in this area.

Impact of Backbone Composition on Homopolymer Dynamics and Brush Block Copolymer Self-Assembly.

Four series of brush block copolymers (BBCP), with near identical side chain compositions but varying backbone structures, were synthesized to investigate the effect of backbone structure on the process of thermal BBCP self-assembly to photonic crystals (PCs). Each of the self-assembled PC films were examined by reflection measurements, small angle X-ray scattering measurements, and scanning electron microscopy to compare the resulting properties of the polymeric photonic crystal and the nanostructured morphology impacted by the backbone structure. It was found that the composition of the brush backbone within a BBCP has a dramatic effect on the ability of the BBCP to self-assemble into ordered nanostructures and on the local ordering of the nanostructure morphology accessed with higher molecular weight (MW) BBCPs (> 1,500 kg/mol). BBCPs with a norbornene imide-based backbone were able to thermally self-assemble to longer wavelength reflecting PCs and had higher fidelity ordering of lamellar nanostructures with higher MW polymers. By analyzing the melt rheological responses of the backbone compositions, both as linear polymers and homobrush polymers, it was concluded that the inherent fragility of the backbone promotes enhanced local ordering in the lamellar nanostructure morphology as well as access to larger domain sizes.

Unconventional Reactivity of Ethynylbenziodoxolone Reagents and Thiols: Scope and Mechanism.

1,2-Dithio-1-alkenes are biologically active compounds widely implemented throughout organic synthesis, functional materials, coordination chemistry, and pharmaceuticals. Traditional methods for accessing 1,2-dithio-1-alkenes often demand transition metal catalysts, specialized or air-sensitive ligands, high temperatures, and disulfides (R2 S2 ). Herein, a general and efficient strategy utilizing ethynylbenziodoxolone (EBX) reagents and thiols is presented that results in the formation of 1,2-dithio-1-alkenes with excellent regioselectivity and stereoselectivity through unprecedented reactivity between the EBX and the thiol. This operationally simple procedure utilizes mild conditions, which result in a broad substrate scope and high functional-group tolerance. The observed unexpected reactivity has been rationalized through both experimental results and DFT calculations.