Aqueous Acetamiprid Degradation Using Combined Ultrasonication and Photocatalysis Under Visible Light.

Acetamiprid (ACE), a neonicotinoid pesticide widely used in pest control, was found in high concentrations in soils, rivers, and lakes. In the present study, ACE degradation was investigated using visible light driven photocatalysis over nitrogen-graphene oxide (N-GO) and palladium-graphene oxide (Pd-GO)-doped ZnO photocatalysts combined with ultrasonication implemented either as a pretreatment (sonolysis) or operated simultaneously with photocatalysis (sonophocatalysis). The effectiveness of the two ACE degradation processes was determined separately. The sonolysis pretreatment allowed reaching almost 40% acetamiprid conversion within 30 min of reaction. Pursuing with the photodegradation reaction in the presence of N-GO-ZnO and Pd-GO-ZnO resulted in a maximum conversion of 98% of ACE within 5 h. As for the sonophotocatalysis process, the reaction time was shortened from 5 to 2 h with 100% acetamiprid conversion. In addition, the photocatalysts were shown to keep their activity even after 5 sonophotocatalytic cycles, thus proving their reusability. Supplementary Information: The online version contains supplementary material available at 10.1007/s11270-022-05867-4.

Synthesis and performance evaluation of a magnetic biocoagulant in the removal of reactive black 5 dye in aqueous medium.

In this study, a biocoagulant synthesized from the association of iron oxide (Fe3O4) nanoparticles and Moringa oleifera Lam (MO) extract was tested in different concentrations for the removal of the apparent colour and dye concentration (reactive black 5) of synthetic textile wastewater. Coagulation/flocculation process was performed and followed by magnetic sedimentation in Jar-Test equipment, the operational parameters studied were sedimentation time and biocoagulant dosage. The efficiency of the C/F/S process was determined by analysing the apparent colour and RB5 concentration, and removals of 93.7% apparent colour and 96.2% RB5 concentration were observed after 20 min of magnetic sedimentation. Reuse tests were performed, which indicated that the biocoagulant and the resulting sludge from the process could be used again for synthesis and used for three consecutive cycles without drastically reducing efficiency (69% for colour removal and 70% for dye concentration). All analyses were conducted considering 95% confidence level. Thus, the proposed biocoagulant demonstrated high potential for the removal of the evaluated parameters in the treatment of textile wastewater due to its high efficiency, simple and fast preparation, and its environmentally friendly qualities.

Hybrid treatment of coagulation/flocculation process followed by ultrafiltration in TIO2-modified membranes to improve the removal of reactive black 5 dye.

Many efforts have been made to minimize the polluting effect of wastewater containing dyes that are potentially toxic to the environment. The association of the coagulation/flocculation (CF) process, using saline extract of Moringa oleifera Lam (MO) seeds and subsequently ultrafiltration (UF) in TiO2-modified membranes was performed to remove reactive black 5 dye (10 ppm, RB5) from aqueous solution. The efficiency of the hybrid process was measured by the removal of the dye concentration, apparent color and fouling parameters. The membranes were successfully modified as supported by characterization methods of SEM, FTIR-ATR and WCA. The efficiency of the processes, when applied separately was low. However, after CF and subsequently the filtration in a TiO2-modified membrane both parameters assessed (dye concentration, apparent color) reached 100% of the removal rate. The modified membranes substantially improved permeate fluxes, for instance, after CF the dye flux for modified membrane enhanced around 49% compared with the flux in the pristine membrane. According to these results, the combination of methods was able to effectively remove RB5 dye, in addition to improving permeate fluxes and keeping fouling at low levels.

Evaluation of different adsorbents for acidity reduction in residual oils.

This work aims to evaluate the adsorption potential of bentonite and sugarcane bagasse clay for the reduction of free fatty acids in cooking oil through batch technique, experimental planning with different operating conditions (temperature, adsorbent mass and agitation). After were carried out kinetic studies and thermodynamic studies. Thus, both adsorbents were characterized by nitrogen dispersion, scanning electron microscopy with coupled energy dispersion spectroscopy. The sugarcane bagasse provided higher reductions compared to the bentonite clay, 58 and 50%, respectively. In the kinetic studies, it was observed that the pseudo-secunda model for both materials. Among the isotherms studied, the Langmuir model was better adjusted for sugarcane bagasse and Freundlich for bentonite clay. Thermodynamic parameters indicated spontaneous and endothermic adsorption at temperatures of 18°C, 20°C and 25°C. Both materials showed an advantageous result with the reduction to the adsorption of free fatty acids in the residual oil, considering that they are low-cost materials, their pre-treatment is simple from the operational point of view and their physical and chemical characteristics are favorable to the adsorption process, sugarcane bagasse contains about 42% hemicellulose, which is a hydroxyl-rich material that attracts the H+ ions from the medium.