Dependence on relative humidity in the formation of reactive oxygen species in water droplets.

Water microdroplets (7 to 11 µm average diameter, depending on flow rate) are sprayed in a closed chamber at ambient temperature, whose relative humidity (RH) is controlled. The resulting concentration of ROS (reactive oxygen species) formed in the microdroplets, measured by the amount of hydrogen peroxide (H2O2), is determined by nuclear magnetic resonance (NMR) and by spectrofluorimetric assays after the droplets are collected. The results are found to agree closely with one another. In addition, hydrated hydroxyl radical cations (•OH-H3O+) are recorded from the droplets using mass spectrometry and superoxide radical anions (•O2-) and hydroxyl radicals (•OH) by electron paramagnetic resonance spectroscopy. As the RH varies from 15 to 95%, the concentration of H2O2 shows a marked rise by a factor of about 3.5 in going from 15 to 50%, then levels off. By replacing the H2O of the sprayed water with deuterium oxide (D2O) but keeping the gas surrounding droplets with H2O, mass spectrometric analysis of the hydrated hydroxyl radical cations demonstrates that the water in the air plays a dominant role in producing H2O2 and other ROS, which accounts for the variation with RH. As RH increases, the droplet evaporation rate decreases. These two facts help us understand why viruses in droplets both survive better at low RH values, as found in indoor air in the wintertime, and are disinfected more effectively at higher RH values, as found in indoor air in the summertime, thus explaining the recognized seasonality of airborne viral infections.

One-step Formation of Urea from Carbon Dioxide and Nitrogen Using Water Microdroplets.

Water (H2O) microdroplets are sprayed onto a graphite mesh covered with a CuBi2O4 coating using a 1:1 mixture of N2 and CO2 as the nebulizing gas. The resulting microdroplets contain urea [CO(NH2)2] as detected by both mass spectrometry and 13C nuclear magnetic resonance. This gas-liquid-solid heterogeneous catalytic system synthesizes urea in one step on the 0.1 ms time scale. The conversion rate reaches 2.7 mmol g-1 h-1 at 25 °C and 12.3 mmol g-1 h-1 at 65 °C, with no external voltage applied. Water microdroplets serve as the hydrogen source and the electron transfer medium for N2 and CO2 in contact with CuBi2O4. Water-gas and water-solid contact electrification are speculated to drive the reaction process. This strategy couples N2 fixation and CO2 utilization in an ecofriendly process to produce urea, converting a greenhouse gas into a value-added product.

Therapeutic contact lenses for the treatment of corneal and ocular surface diseases: Advances in extended and targeted drug delivery.

The eye is one of the most important organs in the human body providing critical information on the environment. Many corneal diseases can lead to vision loss affecting the lives of people around the world. Ophthalmic drug delivery has always been a major challenge in the medical sciences. Since traditional methods are less efficient (∼5%) at delivering drugs to ocular tissues, contact lenses have generated growing interest in ocular drug delivery due to their potential to enhance drug bioavailability in ocular tissues. The main techniques used to achieve sustained release are discussed in this review, including soaking in drug solutions, incorporating drug into multilayered contact lenses, use of vitamin E barriers, molecular imprinting, nanoparticles, micelles and liposomes. The most clinically relevant results on different eye pathologies are presented. In addition, this review summarizes the benefits of contact lenses over eye drops, strategies for incorporating drugs into lenses to achieve sustained release, results of in vitro and in vivo studies, and recent advances in the commercialization of therapeutic contact lenses for allergic conjunctivitis.

On-demand electrochemically controlled compound release from an ultrasonically powered implant.

On-demand drug delivery systems are promising for a wide range of therapeutic applications. When combined with wireless implants for controlled drug delivery, they can reduce overall dosage and side effects. Here, we demonstrate release of fluorescein from a novel on-demand release system for negatively charged compounds. The release system is based on a modified electroresponsive polypyrrole nanoparticulate film designed to minimize ion exchange with the stored compound - a major passive leakage mechanism. We further designed an ultrasonically powered mm-sized implant to electronically control the on-demand drug delivery system in vivo. Release kinetics are characterized both in vitro and in vivo in mice using fluorescein as a model drug, demonstrating the feasibility of wireless, controllable drug release using an ultrasonically powered implant.

Sprayed Water Microdroplets Are Able to Generate Hydrogen Peroxide Spontaneously.

Ultrapure N2 gas was bubbled through water, and the humidified output containing undetectable concentrations of ozone filled a closed chamber in which 18 MΩ-cm water was sprayed through a silica capillary to form microdroplets. Analysis of the collected microdroplets by NMR spectroscopy showed the presence of hydrogen peroxide at a concentration level ranging from 0.3 to 1.5 µM depending on the flow conditions. This was confirmed using a spectrofluorometric assay. We suggest that this finding establishes that when sprayed to form microdroplets, water has the ability to produce hydrogen peroxide by itself. When the N2 gas is replaced by compressed air or O2 gas, the concentration of hydrogen peroxide is found to increase, indicating that gas-surface interactions with O2 in aqueous microdroplets promote the formation of hydrogen peroxide.

Capturing Reactive Carbanions by Microdroplets.

Carbanions appear in many organic or biological reactions as fleeting intermediates, prohibiting direct observation or spectroscopic measurement. An aqueous environment is known to rapidly annihilate a carbanion species, reducing its lifetime to as short as picoseconds. We report that aqueous microdroplets can capture and stabilize reactive carbanion intermediates isolated from four classic organic reactions, aldol and Knoevenagel condensations, alkyne alkylation, and the Reimer-Tiemann reaction, enabling the detection of their carbanion intermediates by desorption electrospray ionization mass spectrometry. This is accomplished in real time of the reaction, allowing new insights into reaction mechanisms to be obtained. The efficacy of microdroplets in capturing such elusive species was examined by varying the solvent and the microdroplet negative charge density. We observed that microdroplets composed of water-methanol outperform other solvents, such as pure water, in capturing carbanions, which is in contrast to the earlier report that presented the highest performance of pure water microdroplets in capturing carbocations. We offer some mechanistic insights to explain the discriminatory behavior of these two oppositely charged species in microdroplets.

Advances in microfabrication technologies in tissue engineering and regenerative medicine.

BACKGROUND: Tissue engineering provides various strategies to fabricate an appropriate microenvironment to support the repair and regeneration of lost or damaged tissues. In this matter, several technologies have been implemented to construct close-to-native three-dimensional structures at numerous physiological scales, which are essential to confer the functional characteristics of living tissues. METHODS: In this article, we review a variety of microfabrication technologies that are currently utilized for several tissue engineering applications, such as soft lithography, microneedles, templated and self-assembly of microstructures, microfluidics, fiber spinning, and bioprinting. RESULTS: These technologies have considerably helped us to precisely manipulate cells or cellular constructs for the fabrication of biomimetic tissues and organs. Although currently available tissues still lack some crucial functionalities, including vascular networks, innervation, and lymphatic system, microfabrication strategies are being proposed to overcome these issues. Moreover, the microfabrication techniques that have progressed to the preclinical stage are also discussed. CONCLUSIONS: This article aims to highlight the advantages and drawbacks of each technique and areas of further research for a more comprehensive and evolving understanding of microfabrication techniques in terms of tissue engineering and regenerative medicine applications.

Distinguishing between Isobaric Ions Using Microdroplet Hydrogen-Deuterium Exchange Mass Spectrometry.

Isobaric ions having the same mass-to-charge ratio cannot be separately identified by mass spectrometry (MS) alone, but this limitation can be overcome by using hydrogen-deuterium exchange (HDX) in microdroplets. Because isobaric ions may contain a varied number of exchangeable sites and different types of functional groups, each one produces a unique MS spectral pattern after droplet spray HDX without the need for MS/MS experiments or introduction of ion mobility measurements. As an example of the power of this approach, isobaric ions in urinary metabolic profiles are identified and used to distinguish between healthy individuals and those having bladder cancer.

Drug delivery to the anterior segment of the eye: A review of current and future treatment strategies.

Research in the development of ophthalmic drug formulations and innovative technologies over the past few decades has been directed at improving the penetration of medications delivered to the eye. Currently, approximately 90% of all ophthalmic drug formulations (e.g. liposomes, micelles) are applied as eye drops. The major challenge of topical eye drops is low bioavailability, need for frequent instillation due to the short half-life, poor drug solubility, and potential side effects. Recent research has been focused on improving topical drug delivery devices by increasing ocular residence time, overcoming physiological and anatomical barriers, and developing medical devices and drug formulations to increase the duration of action of the active drugs. Researchers have developed innovative technologies and formulations ranging from sub-micron to macroscopic size such as prodrugs, enhancers, mucus-penetrating particles (MPPs), therapeutic contact lenses, and collagen corneal shields. Another approach towards the development of effective topical drug delivery is embedding therapeutic formulations in microdevices designed for sustained release of the active drugs. The goal is to optimize the delivery of ophthalmic medications by achieving high drug concentration with prolonged duration of action that is convenient for patients to administer.

Introducing Nafion for In Situ Desalting and Biofluid Profiling in Spray Mass Spectrometry.

We introduce Nafion into the ambient ionization technique of spray mass spectrometry to serve for in situ desalting and direct analysis of biological fluids. Nafion was coated onto the surface of the triangular spray tip as the cation exchange material. Because the sulfonic group from the Nafion membrane effectively exchanges their carried protons with inorganic salt ions (e.g., Na+ and K+), the analyte's ionization efficiency can be significantly enhanced by reducing ion suppression. The desalting efficiency can reach 90% and the maximum tolerance of the absolute salt amount reaches 100 µmol. The mass spectral profile can also be simplified by removing the multiple adducted ion types from small-molecule drugs and metabolites ([M + Na]+ and [M + K]+), or multiply charged ions formed by proteins ([M + nNa]n+ and [M + nK]n+). Thus, the Nafion coating makes less ambiguous data interpretation collected from spray mass spectrometry for qualitative profiling or quantitative measurement of a target analyte.

Extrusion and Microfluidic-based Bioprinting to Fabricate Biomimetic Tissues and Organs.

Next generation engineered tissue constructs with complex and ordered architectures aim to better mimic the native tissue structures, largely due to advances in three-dimensional (3D) bioprinting techniques. Extrusion bioprinting has drawn tremendous attention due to its widespread availability, cost-effectiveness, simplicity, and its facile and rapid processing. However, poor printing resolution and low speed have limited its fidelity and clinical implementation. To circumvent the downsides associated with extrusion printing, microfluidic technologies are increasingly being implemented in 3D bioprinting for engineering living constructs. These technologies enable biofabrication of heterogeneous biomimetic structures made of different types of cells, biomaterials, and biomolecules. Microfluiding bioprinting technology enables highly controlled fabrication of 3D constructs in high resolutions and it has been shown to be useful for building tubular structures and vascularized constructs, which may promote the survival and integration of implanted engineered tissues. Although this field is currently in its early development and the number of bioprinted implants is limited, it is envisioned that it will have a major impact on the production of customized clinical-grade tissue constructs. Further studies are, however, needed to fully demonstrate the effectiveness of the technology in the lab and its translation to the clinic.

Micro and nanoscale technologies in oral drug delivery.

Oral administration is a pillar of the pharmaceutical industry and yet it remains challenging to administer hydrophilic therapeutics by the oral route. Smart and controlled oral drug delivery could bypass the physiological barriers that limit the oral delivery of these therapeutics. Micro- and nanoscale technologies, with an unprecedented ability to create, control, and measure micro- or nanoenvironments, have found tremendous applications in biology and medicine. In particular, significant advances have been made in using these technologies for oral drug delivery. In this review, we briefly describe biological barriers to oral drug delivery and micro and nanoscale fabrication technologies. Micro and nanoscale drug carriers fabricated using these technologies, including bioadhesives, microparticles, micropatches, and nanoparticles, are described. Other applications of micro and nanoscale technologies are discussed, including fabrication of devices and tissue engineering models to precisely control or assess oral drug delivery in vivo and in vitro, respectively. Strategies to advance translation of micro and nanotechnologies into clinical trials for oral drug delivery are mentioned. Finally, challenges and future prospects on further integration of micro and nanoscale technologies with oral drug delivery systems are highlighted.

Antimicrobial Activity of Silver Containing Crosslinked Poly(Acrylic Acid) Fibers.

: Bacterial and fungal pathogens have caused serious problems to the human health. This is particularly true for untreatable infectious diseases and clinical situations where there is no reliable treatment for infected patients. To increase the antimicrobial activity of materials, we introduce silver nanoparticle (NP) patches in which the NPs are incorporated to the surface of smooth and uniform poly(acrylic acid) (PAA) nanofibers. The PAA nanofibers were thermally crosslinked with ethylene glycol via heat treatment through a mild method. The characterization of the resulting PAA-silver NP patches was done using scanning electron microscopy (SEM), UV spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). To demonstrate the antimicrobial activity of PAA, we incorporated the patches containing the silver NPs into strains of fungi such as Candida albicans (C. albican) and bacteria such as Methicillin-resistant Staphylococcus aureus (MRSA). The PAA-silver fibers achieved zones of inhibition against C. albicans and MRSA indicating their antimicrobial activity against both fungi and bacteria. We conclude that silver NP patches exhibited multiple inhibitory actions for the interruption and blockage of activity fungal and bacterial strains, which has the potential as an antimicrobial agent in infectious diseases. Moreover, the proposed material has the potential to be used in antimicrobial textile fabrics, food packaging films, and wound dressings.

Pharmaceutical jewelry: Earring patch for transdermal delivery of contraceptive hormone.

Lack of adherence to medication dosing schedules is a significant cause of morbidity and mortality with large associated financial costs. This is especially true for contraceptive hormones, which provide almost perfect prevention of pregnancy when used correctly, but have significant failure rates in typical use, due largely to poor adherence. To increase medication acceptability and adherence, we introduce pharmaceutical jewelry, in which a transdermal patch is incorporated into jewelry worn on skin. To demonstrate the approach, we incorporated transdermal patches containing the contraceptive hormone levonorgestrel (LNG) into an earring, a ring, a necklace, and a wrist watch. Transdermal delivery of LNG from earring patches across porcine skin ex vivo achieved a steady state flux of 1.7 µg/cm2·h. Pharmacokinetic analysis in hairless rats yielded LNG delivery rates that maintained serum LNG levels near 1500 pg/ml throughout the 1-week patch application period, which is well above the human contraceptive threshold concentration of 200 pg/ml. When patches were applied cyclically for 16 h on and 8 h off to simulate earring removal at night, serum LNG concentrations dipped during off periods, but remained well above the human contraceptive threshold. Earring patches were well tolerated by the rats. We conclude that pharmaceutical jewelry can provide a novel method of drug delivery, especially for contraceptive hormones, that has the potential to improve acceptability and increase medication adherence.

Electrospun Transdermal Patch for Contraceptive Hormone Delivery.

BACKGROUND: A transdermal patch for delivery of Levonorgestrel (LNG) can be used for long-acting contraception. OBJECTIVE: In this study, we designed and characterized a patch made of nonwoven electrospun microfibers comprised of Polycaprolactone (PCL) encapsulating LNG for slow release in a mineral oil matrix. METHODS AND RESULTS: Scanning electron microscopy showed uniform, randomly oriented PCL fibers with large interconnected voids filled with mineral oil. Thermogravimetric analysis indicated that LNG loaded into PCL fibers had thermal stability up to ~200°C. Differential Scanning Calorimetry suggested that LNG was dispersed in the electrospun fibers without interaction between the LNG and PCL, and without formation of drug crystals. Fourier Transform Infrared spectroscopy and X-ray diffraction results further supported the conclusion that there was no chemical drug-polymer interaction in LNGloaded fibers. Effective in vitro flux (i) from patches into mineral oil was 1.9 µgcm-2h-1, (ii) from mineral oil across porcine skin was 4.6 µgcm-2h-1 and (iii) from patches across porcine skin was 1.7 µgcm- 2h-1, indicating that transdermal delivery rate was controlled by a combination of the patch and the skin. CONCLUSION: The LNG-loaded patches demonstrated steady delivery of LNG across skin for up to 5 days in vitro. With additional development, LNG-loaded electrospun PCL patches could be used for long-acting contraception.

Polymeric Nanofiber/Antifungal Formulations Using a Novel Co-extrusion Approach.

We report the successful implementation of a novel melt co-extrusion process to fabricate ca. 1 µm diameter fibers of poly(caprolactone) (PCL) containing the antifungal compound clotrimazole in concentrations between 4 and 8 wt%. The process involves co-extrusion of a clotrimazole-loaded PCL along with poly(ethylene oxide) (PEO) as a co-feed, with subsequent removal of PEO to isolate PCL-clotrimazole fibers. In vitro tests of the clotrimazole-containing fibers against the fungus Aspergillus fumigatus, Candida albicans, and Trichophyton mentagrophytes strains demonstrated good antifungal activity which was maintained for more than 3 weeks. An in vivo study using a mouse model showed the lowest tissue fungal burden for PCL-clotrimazole when compared to a PCL-only patch and untreated controls. Comparative studies were conducted with clotrimazole-containing PCL fibers fabricated by electrospinning. Our data showed that the co-extruded, clotrimazole-containing fibers maintain activity for longer times vs. electrospun samples. This, coupled with the much higher throughput of the co-extrusion process vs. electrospinning, renders this new approach very attractive for the fabrication of drug-releasing polymer fibers.