Machine learning-assisted liquid crystal-based aptasensor for the specific detection of whole-cell Escherichia coli in water and food.

We have developed a rapid, facile liquid crystal (LC)-based aptasensor for E. coli detection in water and juice samples. A textile grid-anchored LC platform was used with specific aptamers adsorbed via a cationic surfactant, cetyltrimethylammonium bromide (CTAB), on the LC surface. The presence of E. coli dissociates the aptamers from CTAB and restores the dark signal induced by the surfactant. Using polarized microscopy, the images of the LCs in the presence of various concentrations of E. coli were captured and analyzed using image analysis and machine learning (ML). The artificial neural networks (ANN) and extreme gradient boosting (XGBoost) rendered the best results for water samples (R2 = 0.986 and RMSE = 0.209) and juice samples (R2 = 0.976 and RMSE = 0.262), respectively. The platform was able to detect E. coli with a detection limit (LOD) of 6 CFU mL-1.

Nitric oxide-releasing thiolated starch nanoparticles embedded in gelatin sponges for wound dressing applications.

This study introduces a novel wound dressing by combining nitric oxide-releasing thiolated starch nanoparticles (NO-TS NPs) with gelatin. First, starch was thiolated (TS), and then its nanoparticles were prepared (TS NPs). Subsequently, NPs were covalently bonded to sodium nitrite to obtain NO-releasing TS NPs (NO-TS-NPs) that were incorporated into gelatin sponges at various concentrations. The resulting spherical TS NPs had a mean size of 85.42 ± 5.23 nm, which rose to 100.73 ± 7.41 nm after bonding with sodium nitrite. FTIR spectroscopy confirmed S-nitrosation on the NO-TS NPs' surface, and morphology analysis showed well-interconnected pores in all sponges. With higher NO-TS NPs content, pore size, porosity, and water uptake increased, while compressive modulus and strength decreased. Composites exhibited antibacterial activity, particularly against E. coli, with enhanced efficacy at higher NPs' concentrations. In vitro release studies demonstrated Fickian diffusion, with faster NO release in sponges containing more NPs. The released NO amounts were non-toxic to fibroblasts, but samples with fewer NO-TS NPs exhibited superior cellular density, cell attachment, and collagen secretion. Considering the results, including favorable mechanical strength, release behavior, antibacterial and cellular properties, gelatin sponges loaded with 2 mg/mL of NO-TS NPs can be suitable for wound dressing applications.

The fertility of dairy heifers and cows is not influenced by the follicular wave of the ovulatory follicle.

Two studies were conducted to evaluate the effects of the follicular wave on ovarian function and fertility in dairy heifers and lactating cows. In study 1, the estrous cycle of the selected Holstein heifers was initially synchronized using two intra-muscular prostaglandin F2α (PGF2α) administrations 11 days apart. Heifers in group FFW (n = 14) received an intra-muscular 500 µg PGF2α administration on day 7 after detecting standing estrus, while Heifers in group SFW (n = 14) were administered PGF2α 13 days after detecting standing estrus. The pregnancy rates of FFW (n = 98) and SFW (n = 100) heifers were also determined 35-37 days after artificial insemination (AI). In Study 2, healthy Holstein lactating cows (n = 28) were randomly assigned to either the FFW (n = 14) or SFW (n = 14) groups. The estrous cycles of the cows were presynchronized using two intra-muscular administrations of PGF2α given 14 days apart. Then, the emergences of the follicular waves were induced using an Ovsynch protocol. The pregnancy rate of FFW (n = 99) versus SFW (n = 98) cows was also determined 35-37 days after AI. The ovulatory follicle and corpus luteum (CL) resulting from the ovulatory follicle of FFW were larger than those of the dominant follicle and the CL of SFW in dairy heifers and lactating cows. However, the pregnancy rate did not differ between the FFW and SFW groups in heifers and lactating cows 35-37 days after AI. In conclusion, although the characteristics of the ovulatory follicles in FFW versus SFW animals differed, the follicular wave in dairy heifers or lactating cows did not affect fertility.

Cartilage regeneration and inflammation modulation in knee osteoarthritis following injection of allogeneic adipose-derived mesenchymal stromal cells: a phase II, triple-blinded, placebo controlled, randomized trial.

BACKGROUND: Intra-articular injection of mesenchymal stromal cells (MSCs) with immunomodulatory features and their paracrine secretion of regenerative factors proposed a noninvasive therapeutic modality for cartilage regeneration in knee osteoarthritis (KOA). METHODS: Total number of 40 patients with KOA enrolled in two groups. Twenty patients received intra-articular injection of 100 × 106 allogeneic adipose-derived mesenchymal stromal cells (AD-MSCs), and 20 patients as control group received placebo (normal saline). Questionnaire-based measurements, certain serum biomarkers, and some cell surface markers were evaluated for 1 year. Magnetic resonance imaging (MRI) before and 1 year after injection was performed to measure possible changes in the articular cartilage. RESULTS: Forty patients allocated including 4 men (10%) and 36 women (90%) with average age of 56.1 ± 7.2 years in control group and 52.8 ± 7.5 years in AD-MSCs group. Four patients (two patients from AD-MSCs group and two patients from the control group) excluded during the study. Clinical outcome measures showed improvement in AD-MSCs group. Hyaluronic acid and cartilage oligomeric matrix protein levels in blood serum decreased significantly in patients who received AD-MSCs (P < 0.05). Although IL-10 level significantly increased after 1 week (P < 0.05), the serum level of inflammatory markers dramatically decreased after 3 months (P < 0.001). Expressions of CD3, CD4, and CD8 have a decreasing trend during 6-month follow-up (P < 0.05), (P < 0.001), and (P < 0.001), respectively. However, the number of CD25+ cells increased remarkably in the treatment group 3 months after intervention (P < 0.005). MRI findings showed a slight increase in the thickness of tibial and femoral articular cartilages in AD-MSCs group. The changes were significant in the medial posterior and medial anterior areas of ​​the tibia with P < 0.01 and P < 0.05, respectively. CONCLUSION: Inter-articular injection of AD-MSCs in patients with KOA is safe. Laboratory data, MRI findings, and clinical examination of patients at different time points showed notable articular cartilage regeneration and significant improvement in the treatment group. TRIAL REGISTRATION: Iranian registry of clinical trials (IRCT, https://en.irct.ir/trial/46 ), IRCT20080728001031N23. Registered 24 April 2018.

Hepatocellular carcinoma (HCC) immunotherapy by anti-PD-1 monoclonal antibodies: A rapidly evolving strategy.

Hepatocellular carcinoma (HCC) is one of the deadliest cancers in the world, with a high relapse rate. Delayed symptom onset observed in 70-80% of patients leads to diagnosis in advanced stages commonly associated with chronic liver disease. Programmed cell death protein 1 (PD-1) blockade therapy has recently emerged as a promising therapeutic option in the clinical management of several advanced malignancies, including HCC, due to the activation of exhausted tumor-infiltrating lymphocytes and improved outcomes of T-cell function. However, many people with HCC do not respond to PD-1 blockade therapy, and the diversity of immune-related adverse events (irAEs) restricts their clinical utility. Therefore, numerous effective combinatory strategies, including combinations with anti-PD-1 antibodies and other therapeutic methods ranging from chemotherapy to targeted therapies, are evolving to improve therapeutic outcomes and evoke synergistic anti-tumor impressions in patients with advanced HCC. Unfortunately, combined therapy may have more side effects than single-agent treatment. Nonetheless, identifying appropriate predictive biomarkers can aid in managing potential immune-related adverse events by distinguishing patients who respond best to PD-1 inhibitors as single agents or in combination strategies. In the present review, we summarize the therapeutic potential of PD-1 blockade therapy for advanced HCC patients. Besides, a glimpse of the pivotal predictive biomarkers influencing a patient's response to anti-PD-1 antibodies will be provided.

Fabrication and multiscale modeling of polycaprolactone/amniotic membrane electrospun nanofiber scaffolds for wound healing.

BACKGROUND: Enhancing the efficiency of cell-based skin tissue engineering (TE) approaches is possible via designing electrospun scaffolds possessing natural materials like amniotic membrane (AM) with wound healing characteristics. Concentrating on this aim, we fabricated innovative polycaprolactone (PCL)/AM scaffolds through the electrospinning process. METHODS: The manufactured structures were characterized by employing scanning electron microscope (SEM), attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, tensile testing, Bradford protein assay, etc. In addition, the mechanical properties of scaffolds were simulated by the multiscale modeling method. RESULTS: As a result of conducting various tests, it was concluded that the uniformity and distribution of fibers decreased with an increase in the amniotic content. Furthermore, PCL-AM scaffolds contained amniotic and PCL characteristic bands. In the case of protein release, greater content of AM led to the release of higher amounts of collagen. Tensile testing revealed that scaffolds' ultimate strength increased when the AM content augmented. The multiscale modeling demonstrated that the scaffold had elastoplastic behavior. In order to assess cellular attachment, viability, and differentiation, human adipose-derived stem cells (ASCs) were seeded on the scaffolds. In this regard, SEM and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assays showed significant cellular proliferation and viability on the proposed scaffolds, and these analyses illustrated that higher cell survival and adhesion could be achieved when scaffolds possessed a larger amount of AM. After 21 days of cultivation, particular keratinocyte markers, such as keratin I and involucrin, were identified through utilizing immunofluorescence and real-time polymerase chain reaction (PCR) tests. The markers' expressions were higher in the PCL-AM scaffold with a ratio of 90:10 v v-1 compared with the PCL-epidermal growth factor (EGF) structure. Moreover, the presence of AM in the scaffolds resulted in the keratinogenic differentiation of ASCs even without employing EGF. Consequently, this state-of-the-art experiment suggests that the PCL-AM scaffold can be a promising candidate in skin bioengineering. CONCLUSION: This study showed that mixing AM with PCL, a widely used polymer, in different concentrations can overcome PCL disadvantages such as high hydrophobicity and low cellular compatibility.

Biomimetic vascular tissue engineering by decellularized scaffold and concurrent cyclic tensile and shear stresses.

Decellularization by chemical approaches has harmful effects on extracellular matrix (ECM) proteins, and damages lots of functional peptides and biomolecules present in the ultrastructure. In this study, we employed a combination of chemical and physical decellularization methods to overcome these disadvantages. The induced osmotic pressure by hypertonic/hypotonic solutions dissociated and removed most of cellular membranes significantly without any detergent or chemical agent. In total, 0.025% trypsin solution was found adequate to remove the remaining debrides, and ultimately 1% Triton X-100 was utilized for final cleansing. In addition, conducting all the decellularization processes at 4 °C yielded an ECM with least damages in the ultrastructure which could be inferred by close mechanical strength and swelling ratio to the native vessel, and high quality and quantity of cell attachment, migration and proliferation which were examined by optical microscopy and scanning electron microscopy (SEM) of the histology samples. Moreover, the obtained biological scaffold (BS) had no cytotoxicity according to the MTT assay, and this scaffold is storable at -20 °C. Employing bioreactor for concurrent cyclic tensile and shear stresses improved the cell migration into pores of the BS and made the cells and the scaffold compact in analogous to native tissue. As opening angle test showed by decellularizing of the blood vessel, the residual stress dropped significantly which revealed the role of cells in the amount of induced stress in the structure. However, intact and healthy ECM explicitly recovered upon recellularization and beat the initial residual stress of the native tissue. The tensile test of the blood vessels in longitudinal and radial directions revealed orthotropic behavior which can be explained by collagen fibers direction in the ECM. Furthermore, by the three regions of the stress-strain curve can be elucidated the roles of cells, elastin and collagen fibers in mechanical behavior of the vascular tissues.

The effect of Nano-liposomal sodium nitrite on smooth muscle cell growth in a tissue-engineered small-diameter vascular graft.

BACKGROUND: Nitric oxide is a chemical agent produced by endothelial cells in a healthy blood vessel, inhibiting the overgrowth of vascular smooth muscle cells and regulating vessel tone. Liposomes are biocompatible and biodegradable drug carriers with a similar structure to cell bilayer phospholipid membrane that can be used as useful nitric oxide carriers in vascular grafts. METHOD: Using a custom-designed apparatus, the sheep carotid arteries were decellularized while still maintaining important components of the vascular extracellular matrix (ECM), allowing them to be used as small-diameter vascular grafts. A chemical signal of sodium nitrite was applied to control smooth muscle cells' behavior under static and dynamic cell culture conditions. The thin film hydration approach was used to create nano-liposomes, which were then used as sodium nitrite carriers to control the drug release rate and enhance the amount of drug loaded into the liposomes. RESULTS: The ratio of 80:20:2 for DPPC: Cholesterol: PEG was determined as the optimum formulation of the liposome structure with high drug encapsulation efficiency (98%) and optimum drug release rate (the drug release rate was 40%, 65%, and 83% after 24, 48, and 72 h, respectively). MTT assay results showed an improvement in endothelial cell proliferation in the presence of nano-liposomal sodium nitrite (LNS) at the concentration of 0.5 µg/mL. Using a suitable concentration of liposomal sodium nitrite (0.5 µg/mL) put onto the constructed scaffold resulted in the controllable development of smooth muscle cells in the experiment. The culture of smooth muscle cells in a pulsatile perfusion bioreactor indicated that in the presence of synthesized liposomal sodium nitrite, the overgrowth of smooth muscle cells was inhibited in dynamic cell culture conditions. The mechanical properties of ECM graft were measured, and a multi-scale model with an accuracy of 83% was proposed to predict mechanical properties successfully. CONCLUSION: The liposomal drug-loaded small-diameter vascular graft can prevent the overgrowth of SMCs and the formation of intimal hyperplasia in the graft. Aside from that, the effect of LNS on endothelial has the potential to stimulate endothelial cell proliferation and re-endothelialization.

A novel co-culture assay to evaluate the effects of sympathetic innervation on vascular smooth muscle differentiation.

Dedifferentiation of vascular smooth muscle cells (VSMCs) from a functional phenotype to an inverse synthetic phenotype is a symptom of cardiovascular disorders, such as atherosclerosis and hypertension. The sympathetic nervous system (SNS) is an essential regulator of the differentiation of vascular smooth muscle cells (VSMCs). In addition, numerous studies suggest that SNS also stimulates VSMCs to retain their contractile phenotype. However, the molecular mechanisms for this stimulation have not been thoroughly studied. In this study, we used a novel in vitro co-culture method to evaluate the effective cellular interactions and stimulatory effects of sympathetic neurons on the differentiation of VSMCs. We co-cultured rat neural-like pheochromocytoma cells (PC12) and rat aortic VSMCs with this method. Expression of VSMCs contractile genes, including smooth muscle actin (acta2), myosin heavy chain (myh11), elastin (eln), and smoothelin (smtn), were determined by quantitative real-time-PCR analysis as an indicator of VSMCs differentiation. Fold changes for specific contractile genes in VSMCs grown in vitro for seven days in the presence (innervated) and absence (non-innervated) of sympathetic neurons were 3.5 for acta2, 6.5 for myh11, 4.19 for eln, and 4 for smtn (normalized to Tata Binding Protein (TBP)). As a result, these data suggest that sympathetic innervation promotes VSMCs' contractile gene expression and also maintains VSMCs' functional phenotype.

Fluorescence labeling of anchor-modified Mart-1 peptide for increasing its affinity for HLA-A*0201: Hit two targets with one arrow.

One of the most successful strategies in designing peptide-based cancer vaccines is modifying natural epitope peptides to increase their binding strength to human leukocyte antigens (HLAs). Anchor-modified Mart-1 peptide (ELAGIGILTV) is among the artificial epitope peptides with the highest binding affinity for HLA-A*0201. In this study, by fluorescence labeling of its either C- or N-terminus with Nε -(5-carboxyfluorescein)-l-lysine, we not only made it traceable but also drastically increased its binding strength to HLA-A*0201. HLA streptamer, for the first time, is introduced for measuring the binding constants (Ka ) of the labeled peptides. The affinity of the labeled peptides for the HLA-A*201 of the MCF-7 cells was extraordinarily high and co-incubating them with the highest possible amount of the unlabeled peptide, as a competitor, did not significantly prohibit them from binding to the HLA. The reproducibility of the obtained results was confirmed by using the T2 cell line. The HLA-deficient K562 cell line was used as the negative control. With in silico simulations, we found two hydrophobic pockets on both sides of HLA-A*0201 for anchoring the C- or N-terminal 5-carboxyfluorescein probe, which can explain the extraordinary affinity of the labeled peptides for the HLA-A*0201.

Investigation of electrical stimulation on phenotypic vascular smooth muscle cells differentiation in tissue-engineered small-diameter vascular graft.

In the development of vascular tissue engineering, particularly in the case of small diameter vessels, one of the key obstacles is the blockage of these veins once they enter the in vivo environment. One of the contributing factors to this problem is the aberrant proliferation and migration of vascular smooth muscle cells (VSMCs) from the media layer of the artery to the interior of the channel. Two distinct phenotypes have been identified for smooth muscle cells, namely synthetic and contractile. Since the synthetic phenotype plays an essential role in the unusual growth and migration, the aim of this study was to convert the synthetic phenotype into the contractile one, which is a solution to prevent the abnormal growth of VSMCs. To achieve this goal, these cells were subjected to electrical signals, using a 1000 µA sinusoidal stimulation at 10 Hz for four days, with 20 min duration per 24 h. The morphological transformations and changes in the expression of vimentin, nestin, and ß-actin proteins were then studied using ICC and flow cytometry assays. Also, the expression of VSMC specific markers such as smooth muscle myosin heavy chain (SMMHC) and smooth muscle alpha-actin (α-SMA) were evaluated using RT-PCR test. In the final phase of this study, the sheep decellularized vessel was employed as a scaffold for seeding these cells. Based on the results, electrical stimulation resulted in some morphological alterations in VSMCs. Furthermore, the observed reductions in the expression levels of vimentin, nestin and ß-actin proteins and increase in the expression of SMMHC and α-SMA markers showed that it is possible to convert the synthetic phenotype to the contractile one using the studied regime of electrical stimulation. Finally, it can be concluded that electrical stimulation can significantly affect the phenotype of VSMCs, as demonstrated in this study.

Clinical and laboratory findings following transplantation of allogeneic adipose-derived mesenchymal stromal cells in knee osteoarthritis, a brief report.

BACKGROUND: Mesenchymal stromal cells (MSCs) injection has been proposed as an innovative treatment for knee osteoarthritis (KOA). Since, allogeneic MSCs can be available as off-the-shelf products, they are preferable in regenerative medicine. Among different sources for MSCs, adipose-derived MSCs (AD-MSCs) appear to be more available. METHODS: Three patients with KOA were enrolled in this study. A total number of 100 × 106 AD-MSCs was injected intra-articularly, per affected knee. They were followed up for 6 months by the assessment of clinical outcomes, magnetic resonance imaging (MRI), and serum inflammatory biomarkers. RESULTS: The primary outcome of this study was safety and feasibility of allogeneic AD-MSCs injection during the 6 months follow-up. Fortunately, no serious adverse events (SAEs) were reported. Assessment of secondary outcomes of visual analogue scale (VAS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), and knee osteoarthritis outcome score (KOOS) indicated improvement in all patients. Comparison between baseline and endpoint findings of MRI demonstrated a slight improvement in two patients. In addition, decrease in serum cartilage oligomeric matrix protein (COMP) and hyaluronic acid (HA) indicated the possibility of reduced cartilage degeneration. Moreover, quantification of serum interleukin-10 (IL-10) and interleukin-6 (IL-6) levels indicated that the host immune system immunomodulated after infusion of AD-MSCs. CONCLUSION: Intra-articular injection of AD-MSCs is safe and could be effective in cartilage regeneration in KOA. Preliminary assessment after six-month follow-up suggests the potential efficacy of this intervention which would need to be confirmed in randomized controlled trials on a larger population. TRIAL REGISTRATION: This study was registered in the Iranian registry of clinical trials (https://en.irct.ir/trial/46) in 24 April 2018 with identifier IRCT20080728001031N23.

Crossing Phylums: Butterfly Wing as a Natural Perfusable Three-Dimensional (3D) Bioconstruct for Bone Tissue Engineering.

Despite the advent of promising technologies in tissue engineering, finding a biomimetic 3D bio-construct capable of enhancing cell attachment, maintenance, and function is still a challenge in producing tailorable scaffolds for bone regeneration. Here, osteostimulatory effects of the butterfly wings as a naturally porous and non-toxic chitinous scaffold on mesenchymal stromal cells are assessed. The topographical characterization of the butterfly wings implied their ability to mimic bone tissue microenvironment, whereas their regenerative potential was validated after a 14-day cell culture. In vivo analysis showed that the scaffold induced no major inflammatory response in Wistar rats. Topographical features of the bioconstruct upregulated the osteogenic genes, including COL1A1, ALP, BGLAP, SPP1, SP7, and AML3 in differentiated cells compared to the cells cultured in the culture plate. However, butterfly wings were shown to provide a biomimetic microstructure and proper bone regenerative capacity through a unique combination of various structural and material properties. Therefore, this novel platform can be confidently recommended for bone tissue engineering applications.

Magnetic force microscopy of an operational spin nano-oscillator.

Magnetic force microscopy (MFM) is a powerful technique for studying magnetic microstructures and nanostructures that relies on force detection by a cantilever with a magnetic tip. The detected magnetic tip interactions are used to reconstruct the magnetic structure of the sample surface. Here, we demonstrate a new method using MFM for probing the spatial profile of an operational nanoscale spintronic device, the spin Hall nano-oscillator (SHNO), which generates high-intensity spin wave auto-oscillations enabling novel microwave applications in magnonics and neuromorphic computing. We developed an MFM system by adding a microwave probe station to allow electrical and microwave characterization up to 40 GHz during the MFM process. SHNOs-based on NiFe/Pt bilayers with a specific design compatible with the developed system-were fabricated and scanned using a Co magnetic force microscopy tip with 10 nm spatial MFM resolution, while a DC current sufficient to induce auto-oscillation flowed. Our results show that this developed method provides a promising path for the characterization and nanoscale magnetic field imaging of operational nano-oscillators.

The First Iranian Cohort of Pediatric Patients with Activated Phosphoinositide 3-Kinase-δ (PI3Kδ) Syndrome (APDS).

BACKGROUND: Activated phosphoinositide 3-kinase δ syndrome (APDS) is a recently defined combined primary immunodeficiency disease (PID) characterized by recurrent respiratory tract infections, lymphoproliferation, autoimmunity and lymphoma. Gain-of-function mutations in PIK3CD and loss-of-function of PIK3R1 genes lead to APDS1 and APDS2, respectively. METHODS: Demographic, clinical, immunological and genetic data were collected from medical records of 15 pediatric patients, who were genetically identified using the whole-exome sequencing method. RESULTS: Fifteen patients (6 APDS1 and 9 APDS2) were enrolled in this study. Recurrent respiratory tract infections followed by lymphoproliferation and autoimmunity were the most common manifestations (86.7%, 53.3% and 26.7%, respectively). Five patients (33.3%) had a Hyper-IgM-syndrome-like immunoglobulin profile. In the APDS1 group, splice site and missense mutations were found in half of the patients and the C-lobe domain of PIK3CD was the most affected region (50%). In the APDS2 group, splice site mutation was the most frequent mutation (77.8%) and the inter-SH2 domain was the most affected region of PIK3R1 (66.7%). Mortality rate was significantly higher in APDS2 group (P = .02) mainly due to chronic lung infections. CONCLUSION: Respiratory tract infections and humoral immunodeficiency are commonly the most important complication in pediatric APDS patients, and they can be fatal by ultimately causing catastrophic damage to the structure of lungs. Hence, physicians should be aware of its significance and further work-up of patients with recurrent respiratory tract infections especially in patients with lymphoproliferation. Moreover, delineation of genotype-phenotype associations with disease severity could be helpful in the timely application of appropriate management and patients' survival.

Autoimmune manifestations among 461 patients with monogenic inborn errors of immunity.

BACKGROUND: The inborn errors of immunity (IEIs) are a group of heterogeneous disorders mainly characterized by severe and recurrent infections besides other complications including autoimmune and inflammatory diseases. In this study, we aim to evaluate clinical, immunologic, and molecular data of monogenic IEI patients with and without autoimmune manifestations. METHODS: We have retrospectively screened cases of monogenic IEI in the Iranian PID registry for the occurrence of autoimmunity and immune dysregulation. A questionnaire was filled for all qualified patients with monogenic defects to evaluate demographic, laboratory, clinical, and molecular data. RESULTS: A total of 461 monogenic IEI patients (290 male and 171 female) with a median (IQR) age of 11.0 (6.0-20.0) years were enrolled in this study. Overall, 331 patients (72.1%) were born to consanguineous parents. At the time of the study, 330 individuals (75.7%) were alive and 106 (24.3%) were deceased. Autoimmunity was reported in 92 (20.0%) patients with a median (IQR) age at autoimmune diagnosis of 4.0 (2.0-7.0) years. Sixteen patients (3.5%) showed autoimmune complications (mostly autoimmune cytopenia) as the first presentation of the disease. Most of the patients with autoimmunity were diagnosed clinically with common variable immunodeficiency (42.4%). The frequency of sinusitis and splenomegaly was significantly higher in patients with autoimmunity than patients without autoimmunity. In patients with autoimmunity, the most common pathogenic variants were identified in LRBA (in 21 patients, 23.0%), ATM (in 13 patients, 14.0%), and BTK (in 9 patients, 10.0%) genes. In the evaluation of autoimmunity by different genes, 4 of 4 IL10RB (100%), 3 of 3 AIRE (100%), and 21 of 30 LRBA (70.0%) mutated genes had the highest prevalence of autoimmunity. CONCLUSIONS: Autoimmune phenomena are common features among patients with monogenic IEI and are associated with a more complicated course of the disease. Therefore, when encountering autoimmune disorders, especially in the setting of dysgammaglobulinemia, it would be appropriate to conduct next-generation sequencing to discover responsible genes for the immune dysregulation at an early stage of the disease.

Increased Osteogenic Potential of Pre-Osteoblasts on Three-Dimensional Printed Scaffolds Compared to Porous Scaffolds for Bone Regeneration.

Background: One of the main challenges with conventional scaffold fabrication methods is the inability to control scaffold architecture. Recently, scaffolds with controlled shape and architecture have been fabricated using three-dimensional printing (3DP). Herein, we aimed to determine whether the much tighter control of microstructure of 3DP poly(lactic-co-glycolic) acid/ß-tricalcium phosphate (PLGA/ß-TCP) scaffolds is more effective in promoting osteogenesis than porous scaffolds produced by solvent casting/porogen leaching. Methods: Physical and mechanical properties of porous and 3DP scaffolds were studied. The response of pre-osteoblasts to the scaffolds was analyzed after 14 days. Results: TThe 3DP scaffolds had a smoother surface (Ra: 22 ± 3 µm) relative to the highly rough surface of porous scaffolds (Ra: 110 ± 15 µm). Water contact angle was 112 ± 4° on porous and 76 ± 6° on 3DP scaffolds. Porous and 3DP scaffolds had the pore size of 408 ± 90 and 315 ± 17 µm and porosity of 85 ± 5% and 39 ± 7%, respectively. Compressive strength of 3DP scaffolds (4.0 ± 0.3 MPa) was higher than porous scaffolds (1.7 ± 0.2 MPa). Collagenous matrix deposition was similar on both scaffolds. Cells proliferated from day 1 to day 14 by fourfold in porous and by 3.8-fold in 3DP scaffolds. Alkaline phosphatase (ALP) activity was 21-fold higher in 3DP scaffolds than porous scaffolds. Conclusion: The 3DP scaffolds show enhanced mechanical properties and ALP activity compared to porous scaffolds in vitro, suggesting that 3DP PLGA/ß-TCP scaffolds are possibly more favorable for bone formation.

Cabbage-derived three-dimensional cellulose scaffold-induced osteogenic differentiation of stem cells.

Herbal-derived three-dimensional scaffolds have a unique structure that represents the natural cellular microenvironment and can be potentially used for tissue engineering applications. In the present study, cabbage (Cb) leaves were decellularized and then their characteristics, such as surface roughness, wettability, porosity, mechanical properties, and specific surface area, were investigated. After that, scaffold osteoinductivity was studied by bone-marrow-derived mesenchymal stem cells (BM-MSCs) osteogenic differentiation while growing on the decellularized Cb leaves. Cells mineralization, calcium secretion, alkaline phosphatase (ALP) activity, and expression levels of bone-related genes were determined during the differentiation process. Our results from the structural characterization of the scaffolds demonstrated that decellularized Cb leaves are good candidates for bone differentiation in terms of surface roughness, mechanical properties, and interconnected pores. Osteogenic differentiation evaluation of the BM-MSCs determined that the cell's ALP activity and mineralization were increased significantly while cultured on the decellularized Cb leaves compared to the cells cultured on the culture plate as a control. Besides, Runx2, ALP, collagen-1 (Col-I), and osteocalcin genes were expressed in cells cultured on decellularized Cb leaves significantly higher than cells cultured on the culture plate. Based on these results, it can be concluded that the decellularized Cb scaffold has great potential for promoting BM-MSCs proliferation and osteogenic differentiation.

Bilayer Cylindrical Conduit Consisting of Electrospun Polycaprolactone Nanofibers and DSC Cross-Linked Sodium Alginate Hydrogel to Bridge Peripheral Nerve Gaps.

Herein, a bilayer cylindrical conduit (P-CA) is presented consisting of electrospun polycaprolactone (PCL) nanofibers and sodium alginate hydrogel covalently cross-linked with N,N'-disuccinimidyl carbonate (DSC). The bilayer P-CA conduit is developed by combining the electrospinning and outer-inner layer methods. Using DSC, as a covalent crosslinker, increases the degradation time of the sodium alginate hydrogel up to 2 months. The swelling ratio of the hydrogel is also 503% during the first 8 h. The DSC cross-linked sodium alginate in the inner layer of the conduit promotes the adhesion and proliferation of nerve cells, while the electrospun PCL nanofibers in the outer layer provide maximum tensile strength of the conduit during surgery. P-CA conduit promotes the migration of Schwann cells along the axon in a rat model based on functional and histological evidences. In conclusion, P-CA conduit will be a promising construct for repairing sciatic nerves in a rat model.

Monogenic Primary Immunodeficiency Disorder Associated with Common Variable Immunodeficiency and Autoimmunity.

BACKGROUND: Common variable immunodeficiency (CVID) is the most frequent primary immunodeficiency disorder mainly characterized by recurrent bacterial infections besides other immunological defects including loss of or dysfunction of B cells and decreased immunoglobulin levels. In this study, our aim is to evaluate clinical, immunological, and molecular data of patients with a primary clinical diagnosis of CVID and autoimmune phenotype with a confirmed genetic diagnosis. METHODS: Among 297 patients with CVID, who were registered in the Iranian Primary Immunodeficiency Registry at Children's Medical Center Hospital in Iran, 83 patients have been genetically examined and 27 patients with autoimmunity and confirmed genetic mutations were selected for analysis. Whole-exome sequencing and confirmatory Sanger sequencing methods were used for the study population. A questionnaire was retrospectively filled for all patients to evaluate demographic, laboratory, clinical, and genetic data. RESULTS: In the 27 studied patients, 11 different genetic defects were identified, and the most common mutated gene was LRBA, reported in 17 (63.0%) patients. Two patients (7.7%) showed autoimmune complications as the first presentation of immunodeficiency. Eleven patients (40.7%) developed one type of autoimmunity, and 16 patients (59.3%) progressed to poly-autoimmunity. Most of the patients with mono-autoimmunity (n = 9, 90.0%) primarily developed infectious complications, while in patients with poly-autoimmunity, the most common first presentation was enteropathy (n = 6, 37.6%). In 13 patients (61.9%), the diagnosis of autoimmune disorders preceded the diagnosis of primary immunodeficiency. The most frequent autoimmune manifestations were hematologic (40.7%), gastrointestinal (48.1%), rheumatologic (25.9%), and dermatologic (22.2%) disorders. Patients with poly-autoimmunity had lower regulatory T cells than patients with mono-autoimmunity. CONCLUSION: In our cohort, the diagnosis of autoimmune disorders preceded the diagnosis of primary immunodeficiency in most patients. This association highlights the fact that patients referring with autoimmune manifestations should be evaluated for humoral immunity.