Encapsulation and sedimentation of nanomaterials through complex coacervation.

HYPOTHESIS: Nanoparticles removal from seawage water is a health and environmental challenge, due to the increasing use of these materials of excellent colloidal stability. Herein we hypothesize to reach this objective through complex coacervation, a straightforward, low-cost process, normally accomplished with non-toxic and biodegradable macromolecules. Highly dense polymer-rich colloidal droplets (the coacervates) obtained from a reversible charge-driven phase separation, entrap suspended nanomaterials, allowing their settling and potential recovery. EXPERIMENTS: In this work we apply this process to highly stable aqueous colloidal dispersions of different surface charge, size, type and state (solid or liquid). We systematically investigate the effects of the biopolymers excess and the nanomaterials concentration and charge on the encapsulation and sedimentation efficiency and rate. This strategy is also applied to real laboratory water-based wastes. FINDINGS: Long-lasting colloidal suspensions are succesfully destabilized through coacervate formation, which ensures high nanomaterials encapsulation efficiencies (~85%), payloads and highly tranparent supernatants (%T ~90%), within two hours. Lower polymer excess induces faster clearance and less sediments, while preserving effective nanomaterials removal. Preliminary experiments also validate the method for the clearance of real water residuals, making complex coacervation a promising scalable, low-cost and ecofriendly alternative to concentrate, separate or recover suspended micro/nanomaterials from aqueous sludges.

C-C Bond-Forming and Bond-Breaking Processes from the Reaction of Diesters with Me3SnLi. Synthesis of Complex Bridged Polycycles and Dialkyl Aromatic Compounds.

1,2-Aromatic diesters can be transformed into strained bridged polycyclic structures by a two-step procedure consisting of an initial reductive alkylation promoted by alkaline metals, followed by a reaction of the resulting unsaturated diesters with Me3SnLi. We propose that a stanna-Brook rearrangement plays a fundamental role in the formation of the polycyclic organotin acetals obtained. These unusual compounds could be further functionalized by tin-lithium exchange followed by alkylation of the newly formed tertiary carbanion. Alternatively, dialkylated aromatic hydrocarbons have been prepared via a decarbonilation reaction promoted by Me3SnLi. 1,4-Aromatic diesters were reductively dialkylated and then transformed into norbornadienone derivatives by reaction with Me3SnLi. Several stable dibenzonorbornadienones 41 have been prepared in just two steps starting from anthracene 38. The corresponding naphthalene analogues gave 1,4-dialkylnaphthalenes. The synthetic protocols described provide access to structures that are not easily obtained through existing synthetic methodologies.

Temperature-Controlled Switchable Photochromism in Solid Materials.

A novel strategy to achieve thermally switchable photochromism in solid materials is reported, which relies on the preparation of polymeric core-shell capsules containing solutions of photochromic dyes in acidic phase-change materials. Upon changing the phase (solid or liquid) of the encapsulated medium, one of the two photochromic states of the system is selectively stabilized on demand, allowing for reversible interconversion between direct and reverse photochromism when thermally scanning through the melting temperature of the phase-change material. This strategy, which does not require the addition of external agents or chemical modification of the dyes, proved to be general for different spiropyran photochromes and to be applicable to the fabrication of a variety of functional materials by simply embedding the capsules obtained into a solid matrix of choice.

Synthesis of Nanoscale Coordination Polymers in Femtoliter Reactors on Surfaces.

In the present work, AFM-assisted lithography was used to perform the synthesis of a coordination polymer inside femtoliter droplets deposited on surfaces. For this, solutions of the metal salt and the organic ligand were independently transferred to adjacent tips of the same AFM probe array and were sequentially delivered on the same position of the surface, creating femtoliter-sized reaction vessels where the coordination reaction and particle growth occurred. Alternatively, the two reagents were mixed in the cantilever array by loading an excess of the inks, and transferred to the surface immediately after, before the precipitation of the coordination polymer took place. The in situ synthesis allowed the reproducible obtaining of round-shaped coordination polymer nanostructures with control over their XY positioning on the surface, as characterized by microscopy and spectroscopy techniques.

Covalent Grafting of Coordination Polymers on Surfaces: The Case of Hybrid Valence Tautomeric Interphases.

We have developed a novel approach for grafting coordination polymers, structured as nanoparticles bearing surface reactive carboxylic groups, to amino-functionalized surfaces through a simple carbodiimide-mediated coupling reaction. As a proof-of-concept to validate our approach, and on the quest for novel hybrid interphases with potential technological applications, we have used valence tautomeric nanoparticles exhibiting spin transition at or around room temperature. SEM and AFM characterization reveal that the nanoparticles were organized chiefly into a single monolayer while X-ray photoelectron spectroscopy (XPS) measurements confirm that the nanoparticles retain a temperature-induced electronic redistribution upon surface anchorage. Our results represent an effective approach towards the challenging manufacture of coordination polymers.

Mn12 single molecule magnets deposited on µ-SQUID sensors: the role of interphases and structural modifications.

Direct measurements of the linear ac susceptibility and magnetic relaxation of a few Mn12 monolayers deposited on a µ-SQUID sensor are reported. In order to integrate the molecules into the device, DPN has been the technique of choice. It enabled the structuration of the molecules on the most sensitive areas of the sensor without the need for any previous functionalization of the molecule or the substrate, while controlling the number of molecular units deposited on each array. The measurements reveal that their characteristic SMM behaviour is lost, a fact that is attributed to molecular distortions originated by the strong surface tensions arising at the molecular interphases.

Surface-confined molecular coolers for cryogenics.

An excellent molecule-based cryogenic magnetic refrigerant, gadolinium acetate tetrahydrate, is here used to decorate selected portions of silicon substrate. By quantitative magnetic force microscopy for a variable applied magnetic field near liquid-helium temperature, the molecules are demonstrated to hold their magnetic properties intact, and therefore their cooling functionality, after their deposition. These results represent a step forward towards the realization of a molecule-based micro-refrigerating device at very low temperatures.

Multiplexed arrays of chemosensors by parallel dip-pen nanolithography.

Miniaturized combined arrays of three different pH indicators allowing for sensitive, robust and broad-range acidity detection are prepared by parallel dip-pen nanolithography, which proves the potential of this technique to fabricate multiplexed platforms at the micro- and nanoscale that can act as sensors.

Determination of the effect of cation-pi interactions on the stability of alpha-oxy-organolithium compounds.

Sn-Li exchange equilibria have allowed the quantification of the stabilizing effect of cation-pi interactions in organolithium chemistry. Stabilization energy data on the effect of Li-pi complexation of an aromatic ring or a CC double bond in organolithium compounds are presented. The amount of stabilization gained by complexation of the Li atom with a pi system in alpha-oxy-organolithium compounds is quite comparable to the one observed in systems containing Li-N or Li-O interactions.

Quantitative data on the effects of alkyl substituents and Li-O and Li-N chelation on the stability of secondary alpha-oxy-organolithium compounds.

A DeltaG(eq) stability scale of secondary alpha-oxy-organolithium compounds was established from measurements of tin-lithium exchange equilibria in THF, and the quantitative effects of substituents at the anionic center on carbanion stability are presented. A new lead-lithium exchange equilibrium reaction was also investigated and shown to be a very useful alternative for the determination of the relative stability of the more sterically hindered organolithium compounds. Alkyl groups adversely affect the stability of organolithium compounds when attached to the carbon bearing the negative charge, but the extent of this effect is highly dependent on the nature of the rest of the substituents attached to the anionic center. Quantitative data on the stabilization imparted to organolithium compounds by Li-O and Li-N chelation have been determined for a variety of systems. The formation of four- and five-membered chelate rings leads to a considerable stabilization of the organolithium compound, while chelation through the formation of six-membered rings affords no extra stabilization to this type of organometallics. Multinuclear NMR experiments carried out on several alpha-oxy-organolithium compounds to determine their aggregation state are supportive of these species being monomers in THF solution.

Dearomatization-bis-alkylation of aromatic and heteroaromatic diesters promoted by Me3SnLi via a stanna-Brook rearrangement.

Reaction of Me3SnLi with aromatic and heteroaromatic diesters proceeds through a fast stanna-Brook rearrangement that generates an stable bis-enolate which can be regioselectively alkylated and cyclized, in one step, to bicyclic compounds containing 6,5-, 6,6-, and 6,7-fused ring systems.