Starch nanoparticles containing phenolic compounds from green propolis: Characterization and evaluation of antioxidant, antimicrobial and digestibility properties.

This study investigated the production of nanoparticles through nanoprecipitation using cassava and potato starches as carriers to stabilize phenolic compounds (PC) from green propolis extract (PE). Additionally, the antioxidant and antimicrobial activities of PC stabilized with starch nanoparticles (SNPs), as well as their release under gastrointestinal conditions were investigated. PE exhibited antioxidant and antibacterial properties, especially PE3 (PE produced using sonication by 20 min and stirring at 30 °C for 24 h) had the highest concentrations of p-coumaric acid, rutin, kaempferol and quercetin. SNPs displayed bimodal distribution with particle size lower than 340 nm. The stabilization of PC increased surface charge and hydrophobicity in SNPs. Moreover, SNPs containing PC from PE exhibited antibacterial activity against Listeria monocytogenes, at a concentration of 750 mg/mL. Low release of PC was observed from the nanoparticles when exposed under simulated gastrointestinal conditions. These nanomaterials could be used as natural ingredients with antioxidant and antimicrobial properties.

Improving Ginger's Bioactive Composition by Combining Innovative Drying and Extraction Technologies.

Ginger extracts (GEs) are antioxidant, antimicrobial, and anti-inflammatory. Their bioactivity can benefit foods and active packaging by extending shelf life, enhancing safety, and providing health benefits. Highly bioactive GEs are crucial to formulating potent active products and avoiding negative effects on their properties. Sesquiterpenes and phenolics are the main bioactives in ginger, but drying and extraction affect their composition. GEs are usually obtained from dry rhizomes; however, these operations have been studied independently. Therefore, a combined study of innovative drying and extraction technologies to evaluate their influence on extracts' composition will bring knowledge on how to increase the bioactivity of GEs. The effects of an emergent drying (vacuum microwave, VMD) followed by an emergent extraction (ultrasound, UAE, 20 or 80 °C) were investigated in this work. Microwave extraction (MAE) of fresh ginger was also studied. Convective oven drying and Soxhlet extraction were the references. Drying kinetics, powder color, extract composition, and antioxidant activity were studied. While MAE preserved the original composition profile, VMD combined with UAE (20 °C) produced extracts richer in phenolics (387.6 mg.GAE/g) and antioxidant activity (2100.7 mmol.Trolox/mL), with low impact in the sesquiterpenes. VMD generated shogaols by its high temperatures and facilitated extracting bioactives by destroying cellular structures and forming pores. UAE extracted these compounds selectively, released them from cell structures, and avoided losses caused by volatilization and thermal degradation. These findings have significant implications, as they provide an opportunity to obtain GE with tailored compositions that can enhance the formulation of food, active packaging, and pharmacological products.

The mechanism, biopolymers and active compounds for the production of nanoparticles by anti-solvent precipitation: A review.

The anti-solvent precipitation method has been investigated to produce biopolymeric nanoparticles in recent years. Biopolymeric nanoparticles have better water solubility and stability when compared with unmodified biopolymers. This review article focuses on the analysis of the state of the art available in the last ten years about the production mechanism and biopolymer type, as well as the used of these nanomaterials to encapsulate biological compounds, and the potential applications of biopolymeric nanoparticles in food sector. The revised literature revealed the importance to understand the anti-solvent precipitation mechanism since biopolymer and solvent types, as well as anti-solvent and surfactants used, can alter the biopolymeric nanoparticles properties. In general, these nanoparticles have been produced using polysaccharides and proteins as biopolymers, especially starch, chitosan and zein. Finally, it was identified that those biopolymers produced by anti-solvent precipitation were used to stabilize essential oils, plant extracts, pigments, and nutraceutical compounds, promoting their application in functional foods.

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films.

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.

Physiological changes in green and red cherry tomatoes after photocatalytic ethylene degradation using continuous air flux.

In this work photocatalytic ethylene degradation (TiO2-UV) was applied in green cherry tomatoes with the aim to control biochemical and physiological changes during ripening. Photocatalytic process was performed at 18 °C ± 2 °C and 85% HR for 10 days using continuous air flux. Ethylene, O2 and CO2 concentration from cherry tomatoes under TiO2-UV and control (c) fruits, were measured by GC-MS for 10 days. After that, the tomatoes were stored for 20 days. During the photocatalysis process, ethylene was completely degraded and control fruits, the ethylene was 28.73 nL/g. Respiration rate was lower for fruits under TiO2-UV than control. During storage period, cherry tomatoes treated by TiO2-UV, showed lower ethylene concentration, respiration rate, total soluble solid, lycopene, sugar and organic acid content than control showing that the fruits treated with photocatalysis did not reach the full maturity. In addition, all the cherry tomatoes showed different maturity stages. Fungal incidence was higher in control fruits than fruits treated with photocatalysis. This research showed for the first time that photocatalytic technology preserved the physiological quality of cherry tomatoes for 30 days of storage, being a promised technology to preserve cherries tomatoes.

Intelligent labels manufactured by thermo-compression using starch and natural biohybrid based.

This work aims to develop intelligent labels based on cassava starch and biohybrid pigments by thermo-compression. The biohybrid pigment (BH) was developed by the adsorption of anthocyanins (ACNs) extracted from the jambolan fruit (Syzygium cumini L.) into montmorillonite (Mt) in order to improve its stability. The effect of the addition of biohybrid on the physicochemical properties of the thermo-pressed starch labels was evaluated. ACNs from jambolan extract show a visible pH-dependent color-changing ability at pH 1 - 12, and the adsorption did not modify the color property. The intelligent labels presented a homogeneous surface, and the BH was well dispersed in the starch matrix. The presence of BH increased the solubility in the water of starch labels. Chemical structure characterization revealed that the BH interacted with starch matrices through hydrogen bonds. Furthermore, the thermal stability of starch labels increased with the presence of BH. Hence, the purple color of intelligent labels was preserved at high temperatures. Finally, labels containing BH show visible changes from purple to a blue color when exposed to ammonia vapor, which simulates the degradation of meat products. Thus, the label content jambolan pigments will be used to control meat deterioration.

Impact of drying and extractions processes on the recovery of gingerols and shogaols, the main bioactive compounds of ginger.

Ginger extracts have anti-inflammatory, antioxidant, antitumor, and antibacterial activities mainly due to gingerols and shogaols. Extract composition and functionality can be affected by drying and extraction processes. Alternative methods to obtain ginger extracts based on high contents of gingerols and shogaols have been reported. However, there were no studies that present a broad overview of how these methods affect the composition and functionalities of ginger extracts. Based on literature data from 2011 to 2022, this review shows how drying, extraction, and complementary processes (i.e., enzymatic, acidic, and carbonic maceration) affect the composition and bioactivity of the ginger extract. Lower temperature processes, including freeze-drying, cold ultrasound-, or enzyme-assisted extraction, lead to extracts richer in phenolics, gingerols, and antioxidant activity. On the other hand, acidic solvents or "hot" processes including microwave-drying, pressurized liquid, and microwave-assisted extraction can favor higher shogaols concentrations, which have higher antitumor, anti-inflammatory, and antimicrobial activities than the gingerols precursors. Thus, in this review, we analyzed and discussed the relation between ginger processing and their bioactive compounds, focusing especially on gingerols and shogaols, as well as the main processes that increase the content of 6-shogaol without compromising other phenolic compounds to produce highly functional extracts for future applications in the food packaging sector.

A review on TiO2-based photocatalytic systems applied in fruit postharvest: Set-ups and perspectives.

Titanium dioxide (TiO2) is a photocatalytic material used to degrade ethylene, and it has been studied as an alternative postharvest technology. Although several studies have indicated the effective action of TiO2 photocatalysis for delaying the fruit ripening, photocatalytic systems need to be well-designed for this application. Fruit is susceptible to environmental conditions like temperature, relative humidity, atmosphere composition and exposure to UV-light. This fragility associated with its variable ethylene production rate over its maturation stage limits the photocatalysis parameters optimization. Thus, this review aims to detail the reaction mechanisms, set-up, advantages, and limitations of TiO2 photocatalytic systems based on polymers-TiO2 nanocomposites and reactors containing TiO2 immobilized into inorganic supports designed for fruit applications. It is expected that this review can elucidate the fundamental aspects that should be considered for the use of these systems.

Ethylene scavenging properties from hydroxypropyl methylcellulose-TiO2 and gelatin-TiO2 nanocomposites on polyethylene supports for fruit application.

Several technologies have been proposed to preserve fruits and to avoid postharvest losses. The degradation of ethylene produced by the fruits using TiO2 photocatalysis has shown to be a good option to delay the ripening of fruits. This paper proposed a new application of biopolymers-TiO2 nanocomposites developed to extend the shelf-life of fruits. Photocatalytic coatings were applied on the expanded polyethylene foam nets to degrade ethylene. Gelatin and hydroxypropyl methylcellulose (HMPC) were tested as hydrophobic and hydrophilic matrices for the TiO2 incorporation. First, nanocomposite films prepared by casting were evaluated with regards to their photocatalytic properties. Both matrices, which were loaded with 1 wt% TiO2, degraded 40% of the ethylene injected in a batch reactor. By Langmuir-Hinshelwood model, ethylene degradation using gelatin-TiO2 films (kapp = 0.186 ± 0.021 min-1) was faster than the HPMC-TiO2 films (kapp = 0.034 ± 0.003 min-1). Then, gelatin-TiO2 dispersion was applied as a coating on the foam nets by dip coating. The gelatin-TiO2 bilayer exhibited higher concentration of ethylene degraded per photocatalytic area and photocatalyst mass unit (13.297 ± 0.178 ppmv m2 [Formula: see text] ) than its film form (18.212 ± 1.157 ppmv m2 [Formula: see text] ), which makes gelatin-TiO2/foam nets a promising composite design for fruit postharvest application.

Bioactive Compounds from Jambolan (Syzygium cumini (L.)) Extract Concentrated by Ultra- and Nanofiltration: a Potential Natural Antioxidant for Food.

Jambolan is an unexplored fruit rich in bioactive compounds like anthocyanins, catechin, and gallic acid. Thus, the extraction of bioactive compounds allows adding value to the fruit. In this context, the present study reports the recovery and concentration of jambolan fruit extract by ultra and nanofiltration for the first time. Acidified water was used to extract polyphenols from the pulp and peel of jambolan. The extracts were concentrated using ultrafiltration and nanofiltration membranes with nominal molecular weight cut-off ranging from 180 to 4000 g mol-1. Total monomeric anthocyanin, total phenolic compounds, and antioxidant capacity were analyzed. Phenolic compounds were quantified, and anthocyanins were identified by high-performance liquid chromatography coupled to diode-array detection and mass spectrometry (HPLC-DAD-MS). Concentration factors higher than 4.0 were obtained for anthocyanins, gallic acid, and catechin after nanofiltration of the extracts. Other compounds such as epicatechin, p-Coumaric acid, and ferulic acid were quantified in the concentrated extract, and the main anthocyanins identified were 3,5-diglucoside: petunidin, malvidin, and delphinidin. Therefore, jambolan extract showed a high potential to be used as a natural dye and antioxidant in food products.

Active coatings based on hydroxypropyl methylcellulose and silver nanoparticles to extend the papaya (Carica papaya L.) shelf life.

This study aimed to understand the effect of silver nanoparticles (AgNPs) on physiochemical properties of hydroxypropyl methylcellulose (HPMC) film-forming solutions (FFS) and nanocomposite films (NCF), as well as the efficacy of these materials to control the development of anthracnose caused by Colletotrichum gloeosporioides in papaya (Carica papaya L.). FFS were characterized by pH, particle size distribution, and rheology. In addition, thickness, morphology, water contact angle, barrier, chemical, crystallinity, thermal, and mechanical properties from NCF were investigated. The minimum inhibitory concentration of AgNPs against C. gloeosporioides was determined by in vitro test. FFS with 0.25 wt% of AgNPs were used as coatings in papayas inoculated with C. gloeosporioides. Finally, the physicochemical parameters were investigated during their storing up to 7 days at 10 °C, followed by 7 days at 20 °C. The presence of AgNPs impacted the thickness, morphology, moisture content, chemical bonds, crystalline structure, and thermal properties of films. Coatings with 0.25 wt% of AgNPs reduced the incidence and severity of C. gloeosporioides and avoided the weight loss of papayas during storing. The ripening of papaya occurred naturally, showing that the coating only delayed this process. Thus, HPMC-AgNPs coating can be an alternative to extend the papaya shelf life.

A novel colorimetric indicator film based on chitosan, polyvinyl alcohol and anthocyanins from jambolan (Syzygium cumini) fruit for monitoring shrimp freshness.

This study aims to develop and characterize colorimetric indicator films based on chitosan, polyvinyl alcohol and anthocyanins from jambolan fruit (Syzygium cumini) prepared by casting method. The effect of anthocyanin extract on thickness, microstructure, moisture content, solubility in water, hydrophobicity, chemical structure, color and opacity of films was analyzed. In addition, anthocyanins photodegradation in films as well its application to monitoring shrimp freshness was studied. Significant effect (p < 0.05) of anthocyanin extract from jambolan fruit on the thickness and optical properties of the films was observed. Anthocyanin extract from jambolan fruit was efficiently incorporated and dispersed into film. The films containing anthocyanins showed visible changes from red color to blue color when used to monitor shrimp freshness at several temperatures (between -20 °C and 20 °C). This research reports for the first time information regarding the valorization and application of anthocyanins from jambolan fruit as an alternative for food packaging sector.

Evaluation of the processing of Perna perna mussels: the influence of water quality involved in the cooling operations in the physico-chemical and microbiological characteristics of the product.

BACKGROUND: The state of Santa Catarina in Brazil is a large producer of Perna perna mussels. However, raw and processed mussels have a short shelf life because of their high microbiological count, such as Vibrio spp. This study evaluated the microbiological and physicochemical quality of raw and ready-to-eat mussels and the quality of water and ice used in the processing of mussels. RESULTS: The microbiological conditions of water and ice used in the processing are not in accordance with Brazilian legislation because of the presence of coliforms and Vibrio spp. For ready-to-eat mussels, counts of psychrophilic and psychrotrophic micro-organisms reached 10(5) colony-forming units g(-1) , a value close to the onset of product degradation during storage. Counts of coliforms, coagulase-positive Staphylococcus, Salmonella spp. and sulfite-reducing Clostridium in the mussels analysed during processing are in accordance with Brazilian law. The F value for the sterilisation procedure was lower than that required for Clostridium botulinum. CONCLUSION: The study shows that microbiological cross-contamination occurred during the processing of mussels. Rigorous control is necessary from the production area of mussels to retailers. Good manufacturing practices must be implemented in the industry and cross-contamination avoided, mainly by Vibrio spp. after heat treatment.