RESUMO
Graphene quantum dots (GQDs) are carbon-based zero-dimensional materials that have received considerable scientific interest due to their exceptional optical, electrical, and optoelectrical properties. Their unique electronic band structures, influenced by quantum confinement and edge effects, differentiate the physical and optical characteristics of GQDs from other carbon nanostructures. Additionally, GQDs can be synthesized using various top-down and bottom-up approaches, distinguishing them from other carbon nanomaterials. This review discusses recent advancements in GQD research, focusing on their synthesis and functionalization for potential applications. Particularly, various methods for synthesizing functionalized GQDs using different doping routes are comprehensively reviewed. Based on previous reports, current challenges and future directions for GQDs research are discussed in detail herein.
RESUMO
A polarization-independent multilayer dielectric diffraction grating with a low aspect ratio and high diffraction efficiency was designed and fabricated. The diffraction grating designed with a grating density of 1200 lines/mm had an aspect ratio of 0.59, mean polarization-independent diffraction efficiency in the Littrow angle of ±2.5∘, and 1030-1080 nm wavelength range of 97.2%. The designed grating was fabricated using ion assisted deposition and reactive ion etching techniques. The mean polarization-independent diffraction efficiency of the fabricated grating was 96.1%, and its standard deviation was 0.68%. The fabricated diffraction grating was irradiated with a 1064 nm cw laser, with a power density of 30kW/cm2, for 1 min to measure the temperature change before and after the laser application. It was verified that the temperature variation of the diffraction grating without heat treatment was 8.8°C, and the temperature variation after heat treatment at 400°C decreased to 2.3°C.
RESUMO
Photophysical and photochemical properties of graphene quantum dots (GQDs) strongly depend on their morphological and chemical features. However, systematic and uniform manipulation of the chemical structures of GQDs remains challenging due to the difficulty in simultaneous control of competitive reactions, i.e., growth and doping, and the complicated post-purification processes. Here, we report an efficient and scalable production of chemically tailored N-doped GQDs (NGs) with high uniformity and crystallinity via a simple one-step solvent catalytic reaction for the thermolytic self-assembly of molecular precursors. We find that the graphitization of N-containing precursors during the formation of NGs can be modulated by intermolecular interaction with solvent molecules, the mechanism of wh ich is evidenced by theoretical calculations and various spectroscopic analyses. Given with the excellent visible-light photoresponse and photocatalytic activity of NGs, it is expected that the proposed approach will promote the practical utilization of GQDs for various applications in the near future.
RESUMO
Lead-(Pb-) halide perovskite nanocrystals (NCs) are interesting nanomaterials due to their excellent optical properties, such as narrow-band emission, high photoluminescence (PL) efficiency, and wide color gamut. However, these NCs have several critical problems, such as the high toxicity of Pb, its tendency to accumulate in the human body, and phase instability. Although Pb-free metal (Bi, Sn, etc.) halide perovskite NCs have recently been reported as possible alternatives, they exhibit poor optical and electrical properties as well as abundant intrinsic defect sites. For the first time, the synthesis and optical characterization of cesium ytterbium triiodide (CsYbI3 ) cubic perovskite NCs with highly uniform size distribution and high crystallinity using a simple hot-injection method are reported. Strong excitation-independent emission and high quantum yields for the prepared NCs are verified using photoluminescence measurements. Furthermore, these CsYbI3 NCs exhibit potential for use in organic-inorganic hybrid photodetectors as a photoactive layer. The as-prepared samples exhibit clear on-off switching behavior as well as high photoresponsivity (2.4 × 103 A W-1 ) and external quantum efficiency (EQE, 5.8 × 105 %) due to effective exciton dissociation and charge transport. These results suggest that CsYbI3 NCs offer tremendous opportunities in electronic and optoelectronic applications, such as chemical sensors, light emitting diodes (LEDs), and energy conversion and storage devices.
RESUMO
In this study, we developed reduced graphene oxide (rGO)-incorporated porous agarose (Ar-rGO) composites that were prepared via a "one-pot" sol-gel method involving a mixing and vacuum freeze-drying process. These composites represent an easy-to-use adsorbent for organic contaminant removal. Ar-rGOs can efficiently adsorb organic molecules, especially aromatic organic compounds from wastewater, because of the synergistic effect between the agarose bundles, which function as a water absorption site, and the rGO sheets, which function as active sites for pollutant binding. The pore structures and morphology of the Ar-rGO composites varied according to the added rGO, resulting in effective water infiltration into the composites. The main adsorption mechanism of the aromatic organic compounds onto Ar-rGOs involved π-π interactions with the rGO sheets. The surface interaction was more effective for adsorbing/desorbing the aromatic pollutants than the electrostatic interaction via the O-containing functional groups. In addition, we confirmed that Ar-rGO is highly stable over the entire pH range (1-13) because of the presence of the rGO sheets.
RESUMO
Recent development in mobile electronic devices and electric vehicles requires electrical wires with reduced weight as well as enhanced stability. In addition, since electric energy is mostly generated from power plants located far from its consuming places, mechanically stronger and higher electric power transmission cables are strongly demanded. However, there has been no alternative materials that can practically replace copper materials. Here, we report a method to prepare ultrastrong graphene fibers (GFs)-Cu core-shell wires with significantly enhanced electrical and mechanical properties. The core GFs are synthesized by chemical vapor deposition, followed by electroplating of Cu shells, where the large surface area of GFs in contact with Cu maximizes the mechanical toughness of the core-shell wires. At the same time, the unique electrical and thermal characteristics of graphene allow a â¼10 times higher current density limit, providing more efficient and reliable delivery of electrical energies through the GFs-Cu wires. We believe that our results would be useful to overcome the current limit in electrical wires and cables for lightweight, energy-saving, and high-power applications.
RESUMO
Large-scale 2D single-crystalline copper nanoplates (Cu NPLs) are synthesized by a simple hydrothermal method. The combination of a mild reductant, stabilizer, and shape modifier allows the dimensional control of the Cu nanocrystals from 1D nanowires (NWs) to 2D nanoplates. High-resolution transmission electron microscopy (HR-TEM) reveals that the prepared Cu NPLs have a single-crystalline structure. From the X-ray photoelectron spectroscopy (XPS) analysis, it is found that iodine plays an important role in the modification of the copper nanocrystals through the formation of an adlayer on the basal plane of the nanoplates. Cu NPLs with an average edge length of 10 µm are successfully synthesized, and these Cu NPLs are the largest copper 2D crystals synthesized by a solution-based process so far. The application of the metallic 2D crystals as a semitransparent electrode proves their feasibility as a conductive filler, exhibiting very low sheet resistance (0.4 Ω â«-1 ) compared to Cu NWs and a transmittance near 75%. The efficient charge transport is due to the increased contact area between each Cu NPL, i.e., so-called plane contact (2D electrical contact). In addition, this type of contact enhances the current-carrying capability of the Cu NPL electrodes, implying that the large-size Cu NPLs are promising conductive fillers for printable electrode applications.
RESUMO
A highly efficient solution-processible charge trapping medium is a prerequisite to developing high-performance organic nano-floating gate memory (NFGM) devices. Although several candidates for the charge trapping layer have been proposed for organic memory, a method for significantly increasing the density of stored charges in nanoscale layers remains a considerable challenge. Here, solution-processible graphene quantum dots (GQDs) were prepared by a modified thermal plasma jet method; the GQDs were mostly composed of carbon without any serious oxidation, which was confirmed by x-ray photoelectron spectroscopy. These GQDs have multiple energy levels because of their size distribution, and they can be effectively utilized as charge trapping media for organic NFGM applications. The NFGM device exhibited excellent reversible switching characteristics, with an on/off current ratio greater than 10(6), a stable retention time of 10(4) s and reliable cycling endurance over 100 cycles. In particular, we estimated that the GQDs layer trapped â¼7.2 × 10(12) cm(-2) charges per unit area, which is a much higher density than those of other solution-processible nanomaterials, suggesting that the GQDs layer holds promise as a highly efficient nanoscale charge trapping material.
RESUMO
2,2,3,3,4,4,4-Heptafluoro-N-phenyl-butyr-amide (F-ADD) was synthesized and shown to induce a composition gradient in a blend of P3HT and PC60BM. The addition of small amounts (ca. 0.5 wt%) of F-ADD modulated the chemical distribution in the blend along the vertical direction by controlling the blend component interface energy through selective interactions between F-ADD and PC60BM. A homogeneous compositional distribution along the vertical direction in the nanostructured bulk heterojunction (BHJ) increased the interfacial area, which shortened the exciton path length to the donor-acceptor interface and improved the photovoltaic performance.