Effect of Surface Functionality on the Rheological and Self-Assembly Properties of Chitin and Chitosan Nanocrystals and Use in Biopolymer Films.

Chitin nanocrystals (ChNCs) are unique to all other bio-derived nanomaterials in one aspect: the inherent presence of a nitrogen moiety. By tuning the chemical functionality of this nanomaterial, and thus its charge and hydrogen bonding capacity, one can heavily impact its macroscopic properties such as its rheological and self-assembly characteristics. In this study, two types of ChNCs are made using acid hydrolysis (AH-ChNCs) and oxidative (OX-ChNCs) pathways, unto which deacetylation using a solvent-free procedure is utilized to create chitosan nanocrystals (ChsNCs) of varying degree of deacetylation (DDA). These nanocrystals were then studied for their rheological behavior and liquid crystalline ordering. It was found that with both deacetylation and carboxylation of ChNCs, viscosity continually increased with increasing concentrations from 2 to 8 wt %, contrary to AH-ChNC dispersions in the same range. Interestingly, increasing the amine content of ChNCs was not proportional to the storage modulus, where a peak saturation of amines provided the most stiffness. Conversely, while the introduction of carboxylation increased the elastic modulus of OX-ChNCs by an order of magnitude from that of AH-ChNCs, it was decreased by increasing DDA. Deacetylation and carboxylation both inhibited the formation of a chiral nematic phase. Finally, these series of nanocrystals were incorporated into biodegradable pectin-alginate films as a physical reinforcement, which showed increased tensile strength and Young's modulus values for the films incorporated with ChsNCs. Overall, this study is the first to investigate how surface functionalization of chitin-derived nanocrystals can affect their rheological and liquid crystalline properties and how it augments pectin/alginate films as a physical reinforcement nanofiller.

Mechanistic study of the increased phototoxicity of titanium dioxide nanoparticles to Chlorella vulgaris in the presence of NOM eco-corona.

Widespread applications and release of photoactive nanoparticles (NPs) such as titanium dioxide (TiO2) into environmental matrices warrant mechanistic investigations addressing toxicity of NPs under environmentally relevant conditions. Accordingly, we investigated the effects of surface adsorbed natural organic matters (NOMs) such as humic acid, tannic acid and lignin on the band gap energy, abiotic reactive oxygen species (ROS) generation, surface chemistry and phototoxicity of TiO2 NPs. Initially, a liquid assisted grinding method was optimized to produce TiO2 NPs with a NOM layer of defined thickness for further analysis. Generally, adsorption of NOM reduced the band-gap energy of TiO2 NPs from 3.08 eV to 0.56 eV with humic acid, 1.92 eV with tannic acid and 2.48 eV with lignin. Light activated ROS generation by TiO2 NPs such as hydroxyl radicals, however, was reduced by 4, 2, 9 times in those coated with humic acid, tannic acid and lignin, respectively. This reduction in ROS despite decrease in band gap energy corroborated with the decreased surface oxygen vacancy (as revealed by X-ray Photoelectron Spectroscopy (XPS)) and quenching of ROS by surface adsorbed NOM. Despite the reduced ROS generation, the NOM-modified TiO2 NPs exhibited an increased phototoxicity to Chlorella vulgaris in comparison to pristine TiO2 NPs. Further analysis suggested that photoactivation of NOM modified TiO2 NPs releases toxic degradation products. Findings from our studies thus provide mechanistic insight into the ecotoxic potential of NOM-modified TiO2 NPs when exposed to light in the environment.

In situ study of Au nanoparticle formation in a mechanochemical-aging-based method.

As we strive to perform chemical transformations in a more sustainable fashion, enabling solid-state reactions through mechanochemistry has emerged as a highly successful approach. Due to the wide-ranging applications of gold nanoparticles (AuNPs), mechanochemical strategies have already been employed for their synthesis. However, the underlying processes surrounding gold salt reduction, nucleation and growth of AuNPs in the solid state are yet to be understood. Here, we present a mechanically activated aging synthesis of AuNPs, through a solid-state Turkevich reaction. Solid reactants are only briefly exposed to input of mechanical energy before being aged statically over a period of six weeks at different temperatures. This system offers an excellent opportunity for an in situ analysis of both reduction and nanoparticle formation processes. During the aging period, the reaction was monitored using a combination of X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, powder X-ray diffraction and transmission electron microscopy, to gain meaningful insights into the mechanisms of solid-state formation of gold nanoparticles. The acquired data allowed for the establishment of the first kinetic model for solid-state nanoparticle formation.

Imaging Photon-Induced Near-Field Distributions of a Plasmonic, Self-Assembled Vesicle by a Laser-Integrated Electron Microscope.

Plasmonic polymeric nanoassemblies offer valuable opportunities in photoconversion applications. Localized surface plasmon mechanisms behind such nanoassemblies govern their functionalities under light illumination. However, an in-depth investigation at the single nanoparticle (NP) level is still challenging, especially when the buried interface is involved, due to the availability of suitable techniques. Here, we synthesized an anisotropic heterodimer composed of a self-assembled polymer vesicle (THPG) capped with a single gold NP, enabling an 8-fold enhancement in hydrogen generation compared to the nonplasmonic THPG vesicle. We explored the anisotropic heterodimer at the single particle level by employing advanced transmission electron microscopes, including one equipped with a femtosecond pulsed laser, which allows us to visualize the polarization- and frequency-dependent distribution of the enhanced electric near fields at the vicinity of Au cap and Au-polymer interface. These elaborated fundamental findings may guide designing new hybrid nanostructures tailored for plasmon-related applications.

A Janus Au-Polymersome Heterostructure with Near-Field Enhancement Effect for Implant-Associated Infection Phototherapy.

Polymer-inorganic hybrid Janus nanoparticles (PI-JNPs) have attracted extensive attention due to their special structures and functions. However, achieving the synergistic enhancement of photochemical activity between polymer and inorganic moieties in PI-JNPs remains challenging. Herein, the construction of a novel Janus Au-porphyrin polymersome (J-AuPPS) heterostructure by a facile one-step photocatalytic synthesis is reported. The near-field enhancement (NFE) effect between porphyrin polymersome (PPS) and Au nanoparticles in J-AuPPS is achieved to enhance its near-infrared (NIR) light absorption and electric/thermal field intensity at their interface, which improves the energy transfer and energetic charge-carrier generation. Therefore, J-AuPPS shows a higher NIR-activated photothermal conversion efficiency (48.4%) and generates more singlet oxygen compared with non-Janus core-particle Au-PPS nanostructure (28.4%). As a result, J-AuPPS exhibits excellent dual-mode (photothermal/photodynamic) antibacterial and anti-biofilm performance, thereby significantly enhancing the in vivo therapeutic effect in an implant-associated-infection rat model. This work is believed to motivate the rational design of advanced hybrid JNPs with desirable NFE effect and further extend their biological applications.

Direct observation by high resolution transmission electron microscopy of gold(III) particle transformation during aging reduction reaction.

We use a gold nanoparticle synthesis as a model system to study the morphological and compositional changes in gold(III) precursor particles, while reduction is taking place during aging after mechanical activation. Scanning transmission electron microscopy coupled with a high-angle annular dark field detector revealed the nanoscale changes in particle morphology, while electron energy loss spectroscopy mapped the changes in the chemical landscape during the reduction process. Tracking a specific region of interest on the sample grid allowed for comparisons to be made of the same particles across a two day monitoring period. High-angle annular dark field images permitted the visualization of particle size reduction of the gold salt while electron energy loss spectroscopy captured the surprising mobility of the lighter chlorine and sodium ions in a solid matrix during the reduction process. This system offers unique insight into precursor particle reactivity in the solid phase, which is relevant for many mechanochemical and aging-based reactions.

Mechanochemical bottom-up synthesis of phosphorus-linked, heptazine-based carbon nitrides using sodium phosphide.

Herein, we present the bottom-up, mechanochemical synthesis of phosphorus-bridged heptazine-based carbon nitrides (g-h-PCN). The structure of these materials was determined through a combination of powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), 31P magic angle spinning nuclear magnetic resonance (MAS NMR), density functional theory (DFT) and electron energy loss spectroscopy (EELS). Compared to traditional furnace-based techniques, the presented method utilizes milder conditions, as well as shorter reaction times. Both samples of g-h-PCN directly after milling and aging and after an hour of annealing at 300 °C (g-h-PCN300) show a reduction in photoluminescent recombination, as well as a nearly two-time increase in photocurrent under broad spectrum irradiation, which are appealing properties for photocatalysis.

High-Humidity Shaker Aging to Access Chitin and Cellulose Nanocrystals.

To unlock nature's potential for functional biomaterials, many efforts have been devoted to isolating the nanocrystalline domains within the supramolecular structure of polysaccharides. Yet, low reactivity and yield in aqueous systems along with excessive solvent usage hinders its development. In this report, the first solvent-free pathway to access carboxylated chitin and cellulose nanocrystals with excellent mass balance is described, relying on a new method coined high-humidity shaker aging (HHSA). The method involves a mild grinding of the polysaccharide with ammonium persulfate followed by an aging phase under high-humidity and on a shaker plate. Insights into the mechanism were uncovered, which highlighted the unique role of high humidity to afford a gradual uptake of water by the material up to deliquescence when the reaction is complete. This process was then validated for direct synthesis of nanocrystals from biomass sources including crab and soft wood pulp.

Hazard Profiling of Commercially Relevant Quantum Dot Components Revealed Synergistic Interactions between Heavy Metals and Polymers.

Commercially used quantum dots (QDs) exemplify complex nanomaterials with multiple components, though little is known about the type of interactions between these components in determining the overall toxicity of this material. We synthesized and characterized a functional QD (CdSe/ZnS_P&E) that was identical in structure and composition to a patented and commercially applied QD and the combinations of its components (CdSe, CdSe/ZnS, ZnS, CdSe_P&E, ZnS_P&E, and P&E). Cells exposed to incremental concentrations of these materials were investigated for cell viability and cellular perturbations, contributing to a final common pathway of cell death using high-content screening assays in model human intestinal epithelial cells (HIEC-6). The concentrations that resulted in a loss of 20% cell viability (EC20 values) for each tested component were used for estimating the combination index (CI) to evaluate synergistic or antagonistic effects between the components. Complete QD (core/shell-polymer) showed the highest toxic potential due to synergistic interactions between core and surface functional groups. The cationic polymer coating enhanced cellular uptake of the QD, ensuing lysosome acidification and release of heavy metal ions to the intracellular milieu, and caused oxidative stress and cytotoxicity. Overall, this study advances our understanding of the collective contribution of individual components of a functional QD toward its toxic potential and emphasizes the need to study multilayered nanomaterials in their entirety for hazard characterization.

Mechanochemical Transformations of Biomass into Functional Materials.

Biomass is one of the promising alternatives to petroleum-derived materials and plays a major role in our fight against climate change by providing renewable sources of chemicals and materials. Owing to its chemical and structural complexity, the transformation of biomass into value-added products requires a profound understanding of its composition at different scales and innovative methods such as combining physical and chemical processes. In this context, the use of mechanochemistry in biomass valorization is currently growing owing to its potentials as an efficient, sustainable, and environmentally friendly approach. This review highlights the latest advances in the transformation of biomass (i. e., chitin, cellulose, hemicellulose, lignin, and starch) to functional materials using mechanochemical-assisted methods. We focused here on the methodology of biomass processing, influencing factors, and resulting properties with an emphasis on achieving functional materials rather than breaking down the biopolymer chains into smaller molecules. Opportunities and limitations associated this methodology were discussed accordingly for future directions.

Density Functional Theory Calculations Decipher Complex Reaction Pathways of 6:2 Fluorotelomer Sulfonate to Perfluoroalkyl Carboxylates Initiated by Hydroxyl Radical.

6:2 Fluorotelomer sulfonate (6:2 FTSA) is a ubiquitous environmental contaminant belonging to the family of per- and polyfluoroalkyl substances. Previous studies showed that hydroxyl radical (•OH) efficiently transforms 6:2 FTSA into perfluoroalkyl carboxylates (PFCAs) of different chain lengths (C2-C7), yet the reaction mechanisms were not elucidated. This study used density functional theory (DFT) calculations to map the entire reaction path of 6:2 FTSA initiated by •OH and experimentally verified the theoretical results. Optimal reaction pathways were obtained by comparing the rate constants calculated from the transition-state theory. We found that 6:2 FTSA was first transformed to C7 PFCA and C6F13•; C6F13• was then further reacted to C2-C6 PFCAs. The parallel addition of •OH and O2 to CnF2n+1• was essential to producing C2-C6 PFCAs. The critical step is the generation of alkoxyl radicals, which withdraw electrons from the adjacent C-C groups to result in chain cleavage. The validity of the calculated optimal reaction pathways was further confirmed by the consistency with our experimental data in the aspects of O2 involvement, identified intermediates, and the final PFCA profile. This study provides valuable insight into the transformation of polyfluoroalkyl substances containing aliphatic carbons in •OH-based oxidation processes.

Enhancing Singlet Oxygen Photocatalysis with Plasmonic Nanoparticles.

Photocatalysts able to trigger the production of singlet oxygen species are the topic of intense research efforts in organic synthesis. Yet, challenges still exist in improving their activity and optimizing their use. Herein, we exploited the benefits of plasmonic nanoparticles to boost the activity of such photocatalysts via an antenna effect in the visible range. We synthesized silica-coated silver nanoparticles (Ag@SiO2 NPs), with silica shells which thicknesses ranged from 7 to 45 nm. We showed that they served as plasmonically active supports for tris(bipyridine)ruthenium(II), [Ru(bpy)3]2+, and demonstrated an enhanced catalytic activity under white light-emitting diode (LED) irradiation for citronellol oxidation, a key step in the commercial production of rose oxide fragrance. A maximum enhancement of the plasmon-mediated reactivity of approximately 3-fold was observed with a 28 nm silica layer along with a 4-fold enhancement in the emission intensity of the photocatalyst. Using electron energy loss spectroscopy (EELS) and boundary element method simulations, we mapped the decay of the plasmonic signal around the Ag core and provided a rationale for the observed catalytic enhancement. This work provides a systematic analysis of the promising properties of plasmonic NPs used as catalysis-enhancing supports for common homogeneous photocatalysts and a framework for the successful design of such systems in the context of organic transformations.

Mechanochemical methods for the transfer of electrons and exchange of ions: inorganic reactivity from nanoparticles to organometallics.

Mechanochemistry by milling, grinding, extrusion or other types of shear and mechanical agitation has shown novel reactivity for a wide range of reactions, not seen in traditional solution-based environments. While the area has been extensively investigated and reviewed in the context of organic and solid-state supramolecular chemistry, less attention has been given to the recent advances in the context of inorganic transformations. Here we provide a perspective of inorganic mechanochemical reactions, focusing on transformations that are based on transfer of charged species: exchange of ions and electrons (redox reactions). These types of mechanochemical transformations typically lead to the formation of new nanoparticles and organometallic complexes. Herein, we provide an overview of mechanochemical reactivity that complements the recent developments in organic synthesis and catalysis.

Chitin and chitosan on the nanoscale.

In a matter of decades, nanomaterials from biomass, exemplified by nanocellulose, have rapidly transitioned from once being a subject of curiosity to an area of fervent research and development, now reaching the stages of commercialization and industrial relevance. Nanoscale chitin and chitosan, on the other hand, have only recently begun to raise interest. Attractive features such as excellent biocompatibility, antibacterial activity, immunogenicity, as well as the tuneable handles of their acetylamide (chitin) or primary amino (chitosan) functionalities indeed display promise in areas such as biomedical devices, catalysis, therapeutics, and more. Herein, we review recent progress in the fabrication and development of these bio-nanomaterials, describe in detail their properties, and discuss the initial successes in their applications. Comparisons are made to the dominant nanocelluose to highlight some of the inherent advantages that nanochitin and nanochitosan may possess in similar application.

Palladium nanoparticles supported on chitin-based nanomaterials as heterogeneous catalysts for the Heck coupling reaction.

In this report, chitin and chitosan nanocrystals were used as biomass-based supports for Pd nanoparticles (NPs) used as a heterogeneous catalyst for the Heck coupling reaction. By using a one-pot fabrication method, a Pd salt precursor was directly reduced and deposited onto these nanocrystal catalysts. Characterization of these nanocomposites showed disperse Pd NPs on the surfaces of the chitinous nanocrystals. Heck coupling model reactions revealed full product yield in relatively benign conditions, outcompeting the use of other catalysts supported on biomass-based nanomaterials, including cellulose nanocrystals. These initial results show the potential for using chitinous nanomaterials as effective catalyst supports in cross-coupling reactions.

Photocatalysis Meets Magnetism: Designing Magnetically Recoverable Supports for Visible-Light Photocatalysis.

While magnetic supports have been widely used to immobilize homogeneous catalysts in organic chemistry, this strategy has so far found very little application in photocatalysis. Indeed, magnetic supports are dark colored, and thus compete for photon absorption with photocatalysts themselves. We have developed a series of core-shell Fe(0)-silica nanoparticles as supports for immobilizing the photosensitizer Ru(bpy)32+, featuring various silica shell thicknesses-16-34 nm SiO2-on 9 nm Fe cores. The supports and the resulting photocatalytic systems were studied for their magnetic, optical, and catalytic properties in the context of the photooxidation of citronellol, and we found that thicker silica shells lead to higher catalytic activity. We correlated this effect as well as Ru(bpy)32+ fluorescence and singlet oxygen generation to the absorption properties of the supports. We were able to reuse our optimal system three times with minimal loss of activity and achieved turnover numbers largely surpassing the performance of homogeneous Ru(bpy)32+. This work highlights the role of material design in the conception of new supports for applications in heterogeneous photocatalysis.

Carboxylated Chitosan Nanocrystals: A Synthetic Route and Application as Superior Support for Gold-Catalyzed Reactions.

In this study, we demonstrate for the first time the fabrication of carboxylated chitosan nanocrystals (ChsNC) with high degree of deacetylation (DDA) at >80% and narrow size distribution. We also studied its application as a sustainable support material for metal-based catalysts. Carboxylated chitin nanocrystals (ChNCs) were initially prepared through partial cleavage of glycosidic bonds in chitin by ammonium persulfate, with concurrent oxidation of chitin C6 primary alcohols to produce carboxylate groups on the surface of the ChNCs. ChsNCs were subsequently prepared using an alkaline deacetylation procedure in the presence of NaBH4 to preserve the nanorod structure of the biomaterial. The resulting nanocrystals feature both carboxyl and amino functional groups. Transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy were used to determine the morphology and composition of these carboxylated ChNCs and ChsNCs. Subsequently, we tested the ability of the as-made ChsNCs as a biomass-based catalyst support for Au nanoparticles (NPs) using the 4-nitrophenol reduction and the aldehyde-amine-alkyne (A3) coupling reactions to demonstrate its capabilities in regard to the ones of cellulose nanocrystals (CNCs). In particular, Au NPs over ChsNCs featured the highest turnover frequency (TOF) value for the 4-nitrophenol reduction reported for all Au-based catalysts supported on carbon-based systems. Spectroscopic and imaging techniques confirmed the importance of precisely controlling the redox state of Au as it is being deposited to afford a highly disperse active site on the bionano-support.

Transformation of 6:2 Fluorotelomer Sulfonate by Cobalt(II)-Activated Peroxymonosulfate.

Peroxymonosulfate (PMS)-based advanced oxidation processes generate highly reactive SO4•- and are promising for water treatment. In this study, we investigated the reaction mechanism of 6:2 fluorotelomer sulfonate (6:2 FTS) with Co2+-activated PMS. 6:2 FTS was simultaneously transformed to perfluoroalkyl carboxylic acids (C2-C7 PFCAs) of different chain lengths, with perfluorohexanoic acid (C6) as the predominant one. The mass balance of the intermediates and products versus the initially added 6:2 FTS was close to 100% over the reaction period. Using chemical scavenging methods, we identified that •OH, instead of SO4•-, was the oxidant initiating the reaction of 6:2 FTS. •OH was mainly produced from SO4•- reacting with H2O. Thus, the reactivity of 6:2 FTS was controlled by the factors affecting the production and scavenging of both SO4•- and •OH. Density functional theory calculations showed that •OH oxidizes 6:2 FTS by H-abstraction from ethyl carbons. This is the first study that demonstrates that •OH in Co2+-activated PMS can play a significant role in contaminant transformations. The results indicate that great caution should be taken when PMS or other agents that generate •OH are used for the treatment of water containing 6:2 FTS or its structural analogs.