Mercury contamination of riverine sediments in the vicinity of a mercury cell chlor-alkali plant in Sagua River, Cuba.

Sediment is a great indicator for assessing coastal mercury contamination. The objective of this study was to assess the magnitude of mercury pollution in the sediments of the Sagua River, Cuba, where a mercury-cell chlor-alkali plant has operated since the beginning of the 1980s. Surface sediments and a sediment core were collected in the Sagua River and analyzed for mercury using an Advanced Mercury Analyser (LECO AMA-254). Total mercury concentrations ranged from 0.165 to 97 µg g(-1) dry weight surface sediments. Enrichment Factor (EF), Index of Geoaccumulation (Igeo) and Sediment Quality Guidelines were applied to calculate the degrees of sediment contamination. The EF showed the significant role of anthropogenic mercury inputs in sediments of the Sagua River. The result also determined that in all stations downstream from the chlor-alkali plant effluents, the mercury concentrations in the sediments were higher than the Probable Effect Levels value, indicating a high potential for adverse biological effects. The Igeo index indicated that the sediments in the Sagua River are evaluated as heavily polluted to extremely contaminated and should be remediated as a hazardous material. This study could provide the latest benchmark of mercury pollution and prove beneficial to future pollution studies in relation to monitoring works in sediments from tropical rivers and estuaries.

Organotins in the sediments of the Zuari estuary, west coast of India.

Industrial use of organotins such as butyltins and phenyltins has increased several folds during the last two decades. Butyltins and phenyltins are synthetic, multipurpose chemicals, which have been extensively used in marine antifouling paints. They have been known to be extremely poisonous to mollusc fishery resources (oysters, clams, etc.). Contamination of Zuari estuary sediments was assessed by quantitative determination of butyltins and phenyltins by using GC-MS using the electron ionization mode. Butyltins predominated in the whole area over phenyltins. Butyltins contributed about 70-90% of the organotins in general. The concentration of butyltins in sediments ranged from 20 to 7621 ng Sn/g. The concentration of phenyltins in sediments ranged from 0 to 46 ng Sn/g. Degradation indices for butyltins and phenyltins were calculated. The Butyltin degradation index (BDI) for the Zuari sediments ranged from 0 to 2.7 indicating a lot of fresh input of butyltins in the estuary and a lower degradation rate. The phenyltin degradation index (PhDI) ranged from 1 to 10 implying that different processes were prevalent at different stations. The observed organotin levels in the Zuari estuary indicate some highly localized areas of contamination which are severe enough to cause harmful effects on marine flora and fauna. Therefore, there is a need to regulate the use of butyltins and phenyltins as biocides in marine antifouling paints.

How can immunochemical methods contribute to the implementation of the Water Framework Directive?

Immunochemical methods (in particular immunoassays) have been applied to spring and surface water samples, respectively, which were set-up as reference materials (RM) within two proficiency testing campaigns. For the first set of proficiency tests (PTs) described here (which were actually the second round of PTs organized, spring 2005), three ELISAs (enzyme-linked immunosorbent assays) were employed in the enzyme tracer format for isoproturon, diuron, and atrazine, respectively. Results were evaluated in comparison with conventional reference methods (LC, GC). Based on their Z-score laboratory performances, the results for isoproturon and diuron were satisfactory, both for fortified spring water and for the blind solution. The results for atrazine were strongly influenced by other triazines present and needed detailed interpretation. For the second set of PTs described here (which were actually the third round of PTs organized, spring 2006), two ELISAs in the coating antigen format were used for isoproturon and diuron, and the result was included with the results obtained by conventional methods during the PTs. The results (the Z-scores) for isoproturon were again classified as satisfactory, in both fortified surface water and blind solution. The results for diuron in ELISA showed an influence of the water matrix, while the analysis of the blind solution was satisfactory. In addition, an ELISA in the enzyme tracer format was applied to analyze isoproturon, diuron, and atrazine in surface water samples, which had been set-up and spiked during a field trial (tank experiment) at the Maas River at Eijsden, The Netherlands. The immunoassay results were compared with those from an in-house on-line SPE LC/MS-MS used as reference. Although the immunochemical results were sometimes higher than those determined in the reference analysis, the general concentration trends in the samples were similar. The contribution of immunochemical methods to the implementation of the European Water Framework Directive is also discussed.

Comparison of three sequential extraction procedures (original and modified 3 steps BCR procedure) applied to sediments of different origin.

The 3 steps sequential extraction procedure proposed by the Standards Measurements and Testing program (SM&T--formerly BCR) of the European Union has been applied for the speciation of metals in sediments. Results obtained by the application of the BCR standardized procedure were compared to those of two four step sequential extraction procedures, which are different from the BCR procedure only for the introduction of an additional step with NaOCl, as 2nd and 3rd step respectively. Five different metals have been taken into consideration: Cd, Cu, Ni, Pb and Zn. The analytical performances of the laboratory have been evaluated using three certified reference materials: the BCR 601 lake sediment for the BCR sequential extraction procedure, PACS-1 and MESS-1 for total metal concentration. Results showed that the efficiency of NaOCl treatment is higher or at least equal to that of H2O2 treatment and that its selectivity is quite satisfying. Moreover the NaOCl treatment doesn't significantly influence the extraction of the easily reducible fraction.

The potential of arsenic speciation in molluscs for environmental monitoring.

This paper reports the assessment of total arsenic and six arsenic species (As(III), As(V), MMA, DMA, AsBet, AsCol) as contaminants of mussel samples collected around the island of Sardinia and in the Gulf of Venice. The samples were analysed using cation- and anion-exchange HPLC-HG-AFS for speciation and ICP-AES for the total As determination. To ensure the robustness of the routine analytical method, the technique was validated using a candidate reference material, BCR-710, and good agreement was obtained. It was recognised that higher total arsenic concentration in mussels does not necessarily result in higher toxicity of mussel samples.