Understanding the Driving Mechanisms of Enhanced Luminescence Emission of Oligo(styryl)benzenes and Tri(styryl)-s-triazine.

This work is focused on unraveling the mechanisms responsible for the aggregation-induced enhanced emission and solid-state luminescence enhancement effects observed in star-shaped molecules based on 1,3,5-tris(styryl)benzene and tri(styryl)-s-triazine cores. To achieve this, the photophysical properties of this set of molecules were analyzed in three states: free molecules, molecular aggregates in solution, and the solid state. Different spectroscopy and microscopy experiments and DFT calculations were conducted to scrutinize the causative mechanisms of the luminescence enhancement phenomenon observed in some experimental conditions. Enhanced luminescence emission was interpreted in the context of short- and long-range excitonic coupling mechanisms and the restriction of intramolecular vibrations. Additionally, we found that the formation of π-stacking aggregates could block E/Z photoisomerization through torsional motions between phenylene rings in the excited state, and hence, enhancing the luminescence of the system.

Photophysical features and semiconducting properties of propeller-shaped oligo(styryl)benzenes.

Electronic, optical, and semiconducting properties of a series of propeller-shaped oligo(styryl)benzenes have been systematically investigated to monitor the effect of the number of styryl branches (three, four, and six) around a central benzene core. In order to clarify the relationships between their structures and properties, Density Functional Theory calculations were carried out at several levels of theory considering solvents with different polarity. Absorption and vibrational Raman spectroscopies showed that cruciform, four-branched derivatives present the most effective π-conjugation in agreement with the lowest calculated bond length alternation and bandgap. Deviations from the mirror image symmetry between absorption and fluorescence spectra were related to changes in the molecular conformation upon electronic excitation. Furthermore, in order to investigate the semiconducting behavior of oligo(styryl)benzenes, molecular structure changes and different electronic properties related to ionization processes were calculated and analyzed. Hole and electron reorganization energies were also computed to provide a first approximation on the n- or p-type character of these compounds. In some cases, electron reorganization energies comparable to common n-type semiconductors were found.

Tricarbocyanine N-triazoles: the scaffold-of-choice for long-term near-infrared imaging of immune cells in vivo.

Herein tricarbocyanine N-triazoles are first described as a rationally-designed near-infrared (NIR) structure overcoming the brightness and photostability limitations of tricarbocyanines for long-term in vivo imaging. The straightforward synthetic approach and the wide availability of alkynes makes this strategy a versatile methodology for the preparation of highly stable N-substituted tricarbocyanines. Furthermore, we validated CIR38M as a non-transferable marker to monitor the fate of therapeutic T cells non-invasively in vivo, showing enhanced performance over conventional NIR fluorophores (i.e. DiR, IR800CW and indocyanine green) as well as compatibility with human cells for translational studies. CIR38M is able to track over time smaller numbers of T cells than current NIR agents, and to visualise antigen-driven accumulation of immune cells at specific sites in vivo. This chemical technology will improve longitudinal imaging studies to assess the efficacy of cell-based immunotherapies in preclinical models and in human samples.

Deep-Blue Oxadiazole-Containing Thermally Activated Delayed Fluorescence Emitters for Organic Light-Emitting Diodes.

A series of four novel deep-blue to sky-blue thermally activated delayed fluorescence (TADF) emitters (2CzdOXDMe, 2CzdOXD4MeOPh, 2CzdOXDPh, and 2CzdOXD4CF3Ph) have been synthesized and characterized. These oxadiazole-based emitters demonstrated bluer emission compared with the reference emitter 2CzPN thanks to the weaker acceptor strength of the oxadiazole moieties. The oxadiazole compounds doped in hosts (mCP and PPT) emitted from 435 to 474 nm with photoluminescence quantum yields ranging from 14-55%. The emitters possess singlet-triplet excited-state energy gaps (Δ EST) between 0.25 and 0.46 eV resulting in delayed components ranging from 4.8 to 25.8 ms. The OLED device with 2CzdOXD4CF3Ph shows a maximum external quantum efficiency of 11.2% with a sky-blue emission at CIE of (0.17, 0.25), while the device with 2CzdOXD4MeOPh shows a maximum external quantum efficiency of 6.6% with a deep-blue emission at CIE of (0.15, 0.11).

Graphene Translucency and Interfacial Interactions in the Gold/Graphene/SiC System.

Integration of graphene into electronic circuits through its joining with conventional metal electrodes (i.e., gold) appears to be one of the main technological challenges nowadays. To gain insight into this junction, we have studied the physicochemical interactions between SiC-supported graphene and a drop of molten gold. Using appropriate high-temperature experimental conditions, we perform wetting experiments and determine contact angles for gold drops supported on graphene epitaxially grown on 4H-SiC. The properties of the metal/graphene interface are analyzed using a wide variety of characterization techniques, along with computational simulations based on density functional theory. In contrast with the established literature, our outcomes clearly show that graphene is translucent in the gold/graphene/SiC interface, and therefore its integration into electronic circuits primarily depends on the right choice of the support to produce favorable wetting interactions with liquid gold.

DFT study of the effect of fluorine atoms on the crystal structure and semiconducting properties of poly(arylene-ethynylene) derivatives.

The effect of fluorine substitution on the molecular structure, crystal packing, and n-type semiconducting properties of a set of poly(arylene-ethynylene) polymers based on alternating thiadiazole and phenyl units linked through ethynylene groups has been studied by means of Density Functional Theory. As a result, an enlargement in the interplanar distance between cofacial polymer chains, as well as a decrease of the electronic coupling and electron mobility is predicted. On the other hand, fluorination could facilitate electron injection into the material. A polymer containing both alkoxy pendant chains and fluorine atoms is proposed as a compromise solution between efficiency of electron injection and charge transport within the material.

Graphenes as Efficient Metal-Free Fenton Catalysts.

Reduced graphene oxide exhibits high activity as Fenton catalyst with HO(.) radical generation efficiency over 82 % and turnover numbers of 4540 and 15023 for phenol degradation and H2 O2 consumption, respectively. These values compare favorably with those achieved with transition metals, showing the potential of carbocatalysts for the Fenton reaction.

Intra- and intermolecular dispersion interactions in [N]cycloparaphenylenes: do they influence their structural and electronic properties?

Cycloparaphenylenes (CPPs) are nanosized structures with unique isolated and bulk properties, and are synthetic targets for the template-driven bottom-up synthesis of carbon nanotubes. Thus, a systematic understanding of the supramolecular order at the nanoscale is of utmost relevance for molecular engineering. In this study, it is found that intramolecular noncovalent (dispersion) interactions must be taken into account for obtaining accurate estimates of the structural and optoelectronic properties of [n]CPP compounds, and their influence as the number of repeat units increases from n=4 to n=12 is also analyzed, both in the gas phase and in solution. The supramolecular self-assembly, for which both intra- and intermolecular noncovalent interactions are relevant, of [6]CPP is also investigated by calculating the binding energies of dimers taken along several crystal directions. These are also used to estimate the cohesive energy of the crystal, which is compared to the value obtained by means of dispersion-corrected DFT calculations using periodic boundary conditions. The reasonable agreement between both computational strategies points towards a first estimate of the [6]CPP cohesive energy of around 50 kcal mol(-1) .

Influence of the chirality of short peptide supramolecular hydrogels in protein crystallogenesis.

For the first time the influence of the chirality of the gel fibers in protein crystallogenesis has been studied. Enantiomeric hydrogels 1 and 2 were tested with model proteins lysozyme and glucose isomerase and a formamidase extracted from B. cereus. Crystallization behaviour and crystal quality of these proteins in both hydrogels are presented and compared.

Effect of the hydration on the biomechanical properties in a fibrin-agarose tissue-like model.

The effect of hydration on the biomechanical properties of fibrin and fibrin-agarose (FA) tissue-like hydrogels is reported. Native hydrogels with approximately 99.5% of water content and hydrogels with water content reduced until 90% and 80% by means of plastic compression (nanostructuration) were generated. The biomechanical properties of the hydrogels were investigated by tensile, compressive, and shear tests. Experimental results indicate that nanostructuration enhances the biomechanical properties of the hydrogels. This improvement is due to the partial draining of the water that fills the porous network of fibers that the plastic compression generates, which produces a denser material, as confirmed by scanning electron microscopy. Results also indicate that the characteristic compressive and shear parameters increase with agarose concentration, very likely due to the high water holding capacity of agarose, which reduces the compressibility and gives consistency to the hydrogels. However, results of tensile tests indicate a weakening of the hydrogels as agarose concentration increases, which evidences the anisotropic nature of these biomaterials. Interestingly, we found that by adjusting the water and agarose contents it is possible to tune the biomechanical properties of FA hydrogels for a broad range, within which the properties of many native tissues fall.

Theoretical estimation of the optical bandgap in a series of poly(aryl-ethynylene)s: a DFT study.

Aimed to optimize the ratio accuracy/computational cost, in this work we study the performance of three different theoretical methodologies in the calculation of the optical bandgap for a test set made of a number of poly(aryl-ethynylene)s related polymers. Infinite, ideal polymer chains were first optimized by means of periodic calculations. Different length oligomers were afterward generated by direct replication of the corresponding periodic structure and their optical bandgaps were calculated by means of different time dependent-density functional theory (TD-DFT) methodologies. These results were fitted to an exponential function for each oligomer family in order to get a theoretical estimation of the optical bandgap for each polymer to be compared to the experimental reported values. The best result was obtained for TD-M06-2X yielding an average deviation of 3.4% with respect to the experimental values.

Crystal structure and charge transport properties of poly(arylene-ethynylene) derivatives: a DFT approach.

In the present study, a series of crystalline poly(arylene-ethynylene) copolymers containing phenylethynylene and 2,5-dialkoxy-phenylethynylene units together with 1,3,4-thiadiazole rings has been modeled by means of periodic calculations. Optimized three-dimensional polymeric structures show interchain distances that are consistent with the experimental values reported for a related polymer. It has also been observed that the presence of pendant alkoxy chains brings on both a further flattening and a separation of the coplanar chains. This fact is linked to a decrease of the interchain cofacial distance. The electron transport character of the polymer crystal structures was assessed through Marcus theory. Electronic coupling between neighboring polymer chains is most influenced by the presence of alkoxy chains giving rise to an expectable enhancement of the electron hopping mobility.

Density functional theory study of the optical and electronic properties of oligomers based on phenyl-ethynyl units linked to triazole, thiadiazole, and oxadiazole rings to be used in molecular electronics.

In the present work, we have studied from a theoretical perspective the geometry and electronic properties of the series of related compounds 2,5-bis(phenylethynyl)-1,3,4-thiadiazole, 2,5-bis(phenylethynyl)-1,3,4-oxadiazole, and 2,5-bis(phenylethynyl)-1,2,4-triazole as candidates for electron-conducting polymers and compounds with desirable (opto)electronic properties. The effect of the ethynyl group (-C[Triple Bond]C-) on the structure and electronic properties was also studied. The influence of planarity on electrical conductivity has been studied by a natural-bond-orbital analysis. The (opto)electronic properties and conducting capability were investigated through the highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gap, excitation energy, bond length alternation, LUMO energy, electron affinities, and intramolecular reorganization energy. Finally, the evolution of some properties such as optical bandgap and electron affinity with the increase of the number of repeat units in the oligomer chain has been checked.

Atmospheric reactions of (H)- and (D)-fluoroalcohols with chlorine atoms.

The reactions of Cl with a series of fluoroalcohols and deuterated fluoroalcohols, CF(3)CH(2)OH (k(4)), CF(3)CH(OH)CH(3) (k(5)), CF(3)CH(OH)CF(3) (k(6)), CF(3)CH(OD)CF(3) (k(7)) and CF(3)CD(OD)CF(3) (k(8)), are investigated as a function of temperature in the range of 268-378 K by laser photolysis-resonance fluorescence. To our knowledge, only the CF(3)CH(2)OH + Cl reaction has been previously studied from a kinetic point of view. The derived Arrhenius expressions obtained using our kinetic data are: k(4) = (1.79+/-0.17) x 10(-13) exp[(410+/-26)/T], k(5) = (1.20+/-0.11) x 10(-12) exp[(394+/-14)/T], k(6) = (2.32+/-0.18) x 10(-13) exp[-(740+/-12)/T], k(7) = (6.45+/-1.87) x 10(-13) exp[-(1136+/-94)/T] and k(8) = (4.19+/-1.09) x 10(-13) exp[-(1378+/-81)/T] (in units of cm(3) molecule(-1) s(-1) and where errors are +/-sigma). Moreover, a theoretical insight into the mechanisms of these reactions is pursued through ab initio Möller-Plesset second-order perturbation treatment calculations with the 6-311G** basis set. Optimized geometries are obtained for reagents, transition states and molecular complexes appearing along the different reaction pathways. Furthermore, molecular energies are calculated at the quadratic configuration interaction with single, double and triple excitations [QCISD(T)] level to obtain an estimation of the activation energies. Finally, the rate constants are calculated through transition-state theory using Wigner's transmission coefficient in order to include the tunnelling-effect corrections.