Emerging biotechnologies and non-thermal technologies for winemaking in a context of global warming.

In the current situation, wine areas are affected by several problems in a context of global warming: asymmetric maturities, pH increasing, high alcohol degree and flat wines with low freshness and poor aroma profile. The use of emerging biotechnologies allows to control or manage such problems. Emerging non-Saccharomyces as Lachancea thermotolerans are very useful for controlling pH by the formation of stable lactic acid from sugars with a slight concomitant alcohol reduction. Lower pH improves freshness increasing simultaneously microbiological stability. The use of Hanseniaspora spp. (specially H. vineae and H. opuntiae) or Metschnikowia pulcherrima promotes a better aroma complexity and improves wine sensory profile by the expression of a more complex metabolic pattern and the release of extracellular enzymes. Some of them are also compatible or synergic with the acidification by L. thermotolerans, and M. pulcherrima is an interesting biotool for reductive winemaking and bioprotection. The use of bioprotection is a powerful tool in this context, allowing oxidation control by oxygen depletion, the inhibition of some wild microorganisms, improving the implantation of some starters and limiting SO2. This can be complemented with the use of reductive yeast derivatives with high contents of reducing peptides and relevant compounds such as glutathione that also are interesting to reduce SO2. Finally, the use of emerging non-thermal technologies as Ultra High-Pressure Homogenization (UHPH) and Pulsed Light (PL) increases wine stability by microbial control and inactivation of oxidative enzymes, improving the implantation of emerging non-Saccharomyces and lowering SO2 additions. GRAPHICAL ABSTRACT.

Effect of HHP and UHPH High-Pressure Techniques on the Extraction and Stability of Grape and Other Fruit Anthocyanins.

The use of high-pressure technologies is a hot topic in food science because of the potential for a gentle process in which spoilage and pathogenic microorganisms can be eliminated; these technologies also have effects on the extraction, preservation, and modification of some constituents. Whole grapes or bunches can be processed by High Hydrostatic Pressure (HHP), which causes poration of the skin cell walls and rapid diffusion of the anthocyanins into the pulp and seeds in a short treatment time (2-10 min), improving maceration. Grape juice with colloidal skin particles of less than 500 µm processed by Ultra-High Pressure Homogenization (UHPH) is nano-fragmented with high anthocyanin release. Anthocyanins can be rapidly extracted from skins using HHP and cell fragments using UHPH, releasing them and facilitating their diffusion into the liquid quickly. HHP and UHPH techniques are gentle and protective of sensitive molecules such as phenols, terpenes, and vitamins. Both techniques are non-thermal technologies with mild temperatures and residence times. Moreover, UHPH produces an intense inactivation of oxidative enzymes (PPOs), thus preserving the antioxidant activity of grape juices. Both technologies can be applied to juices or concentrates; in addition, HHP can be applied to grapes or bunches. This review provides detailed information on the main features of these novel techniques, their current status in anthocyanin extraction, and their effects on stability and process sustainability.

Synergetic Effect of Metschnikowia pulcherrima and Lachancea thermotolerans in Acidification and Aroma Compounds in Airén Wines.

On the one hand, the species Lachancea thermotolerans is known for its high genetic diversity, allowing for the existence of strains that produce high concentrations of lactic acid. In contrast, the species Metschnikowia pulcherrima is renowned for its high enzymatic activity capable of producing aromatic esters during fermentation. By enhancing acidity and boosting the concentration of aromatic compounds, both species are currently used to enhance the organoleptic profile of wines. In this regard, ternary fermentations with M. pulcherrima and L. thermotolerans were carried out and the wines produced were further analysed with GC-FID, FTIR, and UV-Vis spectrophotometry. The outcomes showed that the species M. pulcherrima favored an increase in ethyl lactate (between 37 and 41 mg/L) along with an increased concentration of 2-phenylethyl alcohol (between 30 and 35 mg/L), whereas the species L. thermotolerans was able to produce 1 g/L of lactic acid in ternary fermentations. Additionally, pH levels were slightly lower in these fermentations and the color of the white wines produced showed less chemical oxidation as hue values were lower than the control. Finally, the ternary fermentations of L. thermotolerans and M. pulcherrima had higher overall rating in the tasting. In conclusion, ternary fermentations involving these two non-Saccharomyces species are suggested as a substitute for spontaneous fermentations in the production of wines from neutral varieties to express freshness more vividly. This biotechnology may be further favored by the possibility of applying emerging technologies for the removal of microorganisms in grapes and musts.

Ultrasound-assisted production of alcoholic beverages: From fermentation and sterilization to extraction and aging.

Ultrasound is sound waves above 20 kHz that can be used as a nonthermal ''green'' technology for agri-food processing. It has a cavitation effect, causing bubbles to form and collapse rapidly as they travel through the medium during ultrasonication. Therefore, it inactivates microorganisms and enzymes through cell membrane disruption with physicochemical and sterilization effects on foods or beverages. This emerging technology has been explored in wineries to improve wine color, taste, aroma, and phenolic profile. This paper aims to comprehensively review the research on ultrasound applications in the winery and alcoholic beverages industry, discuss the impacts of this process on the physicochemical properties of liquors, the benefits involved, and the research needed in this area. Studies have shown that ultrasonic technology enhances wine maturation, improves wine fermentation, accelerates wine aging, and deactivates microbes while enhancing quality, as observed with better critical aging markers such as phenolic compounds and color intensity. Besides, ultrasound enhances phytochemical, physicochemical, biological, and organoleptic properties of alcoholic beverages. For example, this technology increased anthocyanin in red wine by 50%. It also enhanced the production rate by decreasing the aging time by more than 90%. Ultrasound can be considered an economically viable technology that may contribute to wineries' waste valorization, resource efficiency improvement, and industry profit enhancement. Despite numerous publications and successful industrial applications discussed in this paper, ultrasound up-scaling and applications for other types of liquors need further efforts.

Co-inoculations of Lachancea thermotolerans with different Hanseniaspora spp.: Acidification, aroma, biocompatibility, and effects of nutrients in wine.

The use of non-Saccharomyces yeast in the winemaking industry and even more their co-inoculations to maximize their growth and to express phenotypic characteristic is gaining more and more relevance. This study aimed to shed light on the biocompatibilities between Lachancea thermotolerans and Hanseniaspora spp., using different types of nutrients and considering the effect on Yeast Assimilable Nitrogen (YAN), at low temperature (16 °C) and medium SO2 (50 mg/L), in white must. L. thermotolerans has been used for its positive effect on pH reduction and Hanseniaspora spp. for improving the sensory profile. The behaviour of these yeasts was evaluated in co-inoculation, always finishing the fermentation with the sequential inoculation of S. cerevisiae. Significant results were obtained on the population count (CFU/mL) in CHROMagar™, with higher populations of Hanseniaspora spp. with respect to L. thermotolerans. Fermentations with L. thermotolerans/H. vineae, showed inhibition of acidification, generating up to 0.41 g/L of lactic acid. On the contrary, a synergistic effect when L. thermotolerans/H. opuntiae was used, achieved 2.44 g/L of lactic acid and a pH reduction of up to 0.16 and always more significant with Nutrient Vit BlancTM. At the same time ethanol concentration decreased by 3.4 % and volatile acidity never exceeded 0.5 g/L. Aromatic composition was analysed and it was found that all fermentations retained more aromatic esters and that on day 7 the amount of 2-phenylethyl acetate was at least 3 times higher in all fermentations compared to the control (Sc + Nutrient Vit BlancTM) which had 5.96 mg/L. Less yellow intensity (-17.3 %) typical of oxidation were observed in all fermentations in which Nutrient Vit BlancTM had been used and in the sensory analysis the co-inoculations with H. vineae generated better scores.

Biomodulation of Physicochemical Parameters, Aromas, and Sensory Profile of Craft Beers by Using Non-Saccharomyces Yeasts.

Beer is an alcoholic beverage produced by the metabolism of yeasts and made from water, malt, and hops. In recent years, the interest in craft beers has increased considerably due to the demand for new beverages and the consumer's willingness to pay higher prices. This article explores the sensorial changes produced in craft beers by using different Saccharomyces and non-Saccharomyces yeasts with several instrumental and sensory analyses performed. After a primary fermentation process with Saccharomyces cerevisiae or Lachancea thermotolerans, it was observed that green beer brewed with L. thermotolerans had a lower pH (3.41) due to the significant production of l-lactic acid (3.98 g/L) compared to that brewed with S. cerevisiae. Following, the bottle conditioning was carried out with a culture of S. cerevisiae, L. thermotolerans, Hanseniaspora vineae, or Schizosaccharomyces pombe. Of note is the increased production of aromatic esters, including 2-phenylethyl acetate in the H. vineae conditioning, which is associated with a high aromatic quality, as well as ethyl lactate in all samples, whose main fermentation was carried out with L. thermotolerans. Although this research is at an early stage, future complementary studies may shed more light on this topic.

Contribution of Grape Juice to Develop New Isotonic Drinks With Antioxidant Capacity and Interesting Sensory Properties.

Nowadays, the sector of isotonic beverages has developed its market based on fruit juices that provide a sports drink with antioxidant and biological activities in addition to their principal role of rehydration and replacement of minerals and carbohydrates during physical exercise. Consumption of grape juice is increasing worldwide because of its sensory characteristics and nutritional value. It contains mainly water, sugars, organic acids, and phenolic compounds. Phenolic compounds play a major role in prevention of various diseases through their biological activities linked to antioxidant, anti-inflammation, anticancer, anti-aging, antimicrobial, and cardioprotective properties. Several studies have demonstrated that grape juice is able to improve performances of antioxidant activity, protect against oxidative damage, and reduce inflammation during sports activities. Polyphenol content also provides a great sensory profile, mainly color which is an important indicator for consumers when choosing beverage products. The contribution of grape juice through its nutritional value and sensory properties makes it an alternative for the development of a new isotonic drink that will be a novel and healthy product in the field of healthy beverages.

Elaboration of an organic beverage based on grape juice with positive nutritional properties.

The present study aimed to develop a natural beverage with interesting phytochemical composition and biological activity based on grape juice without added sugars or artificial additives. Two groups of blends were made by diluting concentrate grape juice with a sugar content of 65 °Brix with two different mineral waters (BA: Bezoya with low mineralization; BB: Solan de Cabras with high mineralization). Lemon juice was used for pH correction, and mixtures of extractions of hop with tea and hop with mint were used to increase aroma. Samples were stored under refrigeration (4°C) then subjected to physicochemical and sensory analysis. The results demonstrated that malvidin-3-O-glucoside pigment was the predominant pigment with a concentration ranging from 75.71 ± 12.49 to 84.87 ± 1.70 mg/L. The levels of sugars ranged from 79.90 ± 1.37 to 82.37 ± 0.55 g/L and total soluble solids were between 5.47 ± 0.12 and 5.77 ± 0.06 °Brix. Total acids presented a significant difference, ranging from 1.40 ± 0.00 to 1.43 ± 0.06 g/L in BA samples and from 1.10 ± 0.10 to 1.20 ± 0.00 g/L in BB samples. For 20 days, the color increased in all beverages. However, BA drinks presented higher acidity and higher red color intensity than BB drinks, so the type of water and pH influenced the color of beverages. The sensory evaluation showed that the beverage made with low mineral water and flavored with a mixture of hop with tea was preferred.

Guidelines on reporting treatment conditions for emerging technologies in food processing.

In the last decades, different non-thermal and thermal technologies have been developed for food processing. However, in many cases, it is not clear which experimental parameters must be reported to guarantee the experiments' reproducibility and provide the food industry a straightforward way to scale-up these technologies. Since reproducibility is one of the most important science features, the current work aims to improve the reproducibility of studies on emerging technologies for food processing by providing guidelines on reporting treatment conditions of thermal and non-thermal technologies. Infrared heating, microwave heating, ohmic heating and radiofrequency heating are addressed as advanced thermal technologies and isostatic high pressure, ultra-high-pressure homogenization sterilization, high-pressure homogenization, microfluidization, irradiation, plasma technologies, power ultrasound, pressure change technology, pulsed electric fields, pulsed light and supercritical CO2 are approached as non-thermal technologies. Finally, growing points and perspectives are highlighted.

Comparison between Membrane and Thermal Dealcoholization Methods: Their Impact on the Chemical Parameters, Volatile Composition, and Sensory Characteristics of Wines.

Over the last few years, the dealcoholization of wine has piqued the interest of winemakers and researchers. Physical dealcoholization methods are increasingly used in the dealcoholization of wines because they can partially or completely reduce the alcohol content of wines. This study aimed to compare the chemical parameters, volatile composition and sensory quality of white, rosé and red wines dealcoholized by two physical dealcoholization methods: reverse osmosis (RO) and vacuum distillation (VD) at 0.7% v/v ethanol. RO and VD effectively reduced the ethanol concentration in all wines to the required 0.7% v/v, but also significantly affected most chemical parameters. The pH, free sulfur dioxide, total sulfur dioxide, and volatile acidity decreased significantly due to dealcoholization by RO and VD, while reducing sugars and total acidity increased significantly. VD resulted in higher color intensity, which was perceptible in dealcoholized rosé and red wines, while RO caused notable color differences in dealcoholized white and red wine fractions. RO were richer in esters (more ethyl esters and isoamyl acetate), higher alcohols, organic acids, terpenics and C13-norisoprenoids, and carbonyl compounds, while wines dealcoholized with VD had lower levels of these volatile compounds, which may reflect both the loss of esters into the distillate during evaporation and condensation (in the case of VD) and a shift in the chemical equilibrium responsible for ester formation and hydrolysis after ethanol removal. ß-damascenone exhibited the highest OAV in all wines, however, losses equal to 35.54-61.98% in RO dealcoholized fractions and 93.62% to 97.39% in VD dealcoholized fractions were observed compared to the control wines. The predominant aroma series in the original and dealcoholized wines were fruity and floral but were greatly affected by VD. Sensory evaluation and PCA showed that dealcoholization by RO improved the fruity and floral notes (in rosé and red wines), color intensity, sweetness, viscosity, and aroma intensity better than dealcoholization by VD, while VD mainly enhanced the color of the dealcoholized wines. Both methods increased the acidity of the respective dealcoholized wines. Nevertheless, RO dealcoholized wines achieved higher acceptance by the panelists than VD dealcoholized wines. Therefore, RO may be a better method for producing dealcoholized (0.7% v/v) wines with minimal impact on aroma and sensory quality.

Emerging Non-Thermal Technologies for the Extraction of Grape Anthocyanins.

Anthocyanins are flavonoid pigments broadly distributed in plants with great potential to be used as food colorants due to their range of colors, innocuous nature, and positive impact on human health. However, these molecules are unstable and affected by pH changes, oxidation and high temperatures, making it very important to extract them using gentle non-thermal technologies. The use of emerging non-thermal techniques such as High Hydrostatic Pressure (HHP), Ultra High Pressure Homogenization (UHPH), Pulsed Electric Fields (PEFs), Ultrasound (US), irradiation, and Pulsed Light (PL) is currently increasing for many applications in food technology. This article reviews their application, features, advantages and drawbacks in the extraction of anthocyanins from grapes. It shows how extraction can be significantly increased with many of these techniques, while decreasing extraction times and maintaining antioxidant capacity.

Non-Saccharomyces as Biotools to Control the Production of Off-Flavors in Wines.

Off-flavors produced by undesirable microbial spoilage are a major concern in wineries, as they affect wine quality. This situation is worse in warm areas affected by global warming because of the resulting higher pHs in wines. Natural biotechnologies can aid in effectively controlling these processes, while reducing the use of chemical preservatives such as SO2. Bioacidification reduces the development of spoilage yeasts and bacteria, but also increases the amount of molecular SO2, which allows for lower total levels. The use of non-Saccharomyces yeasts, such as Lachancea thermotolerans, results in effective acidification through the production of lactic acid from sugars. Furthermore, high lactic acid contents (>4 g/L) inhibit lactic acid bacteria and have some effect on Brettanomyces. Additionally, the use of yeasts with hydroxycinnamate decarboxylase (HCDC) activity can be useful to promote the fermentative formation of stable vinylphenolic pyranoanthocyanins, reducing the amount of ethylphenol precursors. This biotechnology increases the amount of stable pigments and simultaneously prevents the formation of high contents of ethylphenols, even when the wine is contaminated by Brettanomyces.

Improvement of Must Fermentation from Late Harvest cv. Tempranillo Grapes Treated with Pulsed Light.

Pulsed light irradiation is a nonthermal technology currently used for the elimination of pathogens from a diverse range of food products. In the last two decades, the results obtained using PL at laboratory scale are encouraging wine experts to use it in the winemaking industry. PL can reduce native yeast counts significantly, which facilitates the use of starter cultures, reducing SO2 requirements at the same time. In this experimental set up, Tempranillo grapes were subjected to pulsed light treatment, and the fermentative performance of non-Saccharomyces yeasts belonging to the species Schizosaccharomyces pombe, Lachancea thermotolerans, Torulaspora delbrueckii, Metschnikowia pulcherrima and Hanseniaspora vineae was monitored in sequential fermentations against spontaneous fermentation and pure culture fermentation with the species Saccharomyces cerevisiae. The experimental analyses comprised the determination of anthocyanin (High performance liquid chromatography with photodiode array detector-HPLC-DAD), polyphenol index and colour (Ultraviolet-visible spectroscopy-UV-Vis spectrophotometer), fermentation-derived volatiles (Gas chromatography with flame ionization detector-GC-FID), oenological parameters (Fourier transform Infrared spectroscopy-FT-IR) and structural damage of the skin (atomic force microscopy-AFM). The results showed a decrease of 1.2 log CFU/mL yeast counts after pulsed light treatment and more rapid and controlled fermentation kinetics in musts from treated grapes than in untreated samples. The fermentations done with treated grapes allowed starter cultures to better implant in the must, although a larger anthocyanin loss (up to 93%) and an increase in hue values (1 unit) towards more yellow hues were observed for treated grapes. The development of biomass was larger in musts from treated grapes. The profile of volatile compounds and oenological parameters reveals that fermentations carried out with untreated grapes are prone to deviations from native microbiota (e.g., production of lactic acid). Finally, no severe damage on the skin was observed with the AFM on treated grapes.

Pulsed Electric Fields to Improve the Use of Non-Saccharomyces Starters in Red Wines.

New nonthermal technologies, including pulsed electric fields (PEF), open a new way to generate more natural foods while respecting their organoleptic qualities. PEF can reduce wild yeasts to improve the implantation of other yeasts and generate more desired metabolites. Two PEF treatments were applied; one with an intensity of 5 kV/cm was applied continuously to the must for further colour extraction, and a second treatment only to the must (without skins) after a 24-hour maceration of 17.5 kV/cm intensity, reducing its wild yeast load by up to 2 log CFU/mL, thus comparing the implantation and fermentation of inoculated non-Saccharomyces yeasts. In general, those treated with PEF preserved more total esters and formed more anthocyanins, including vitisin A, due to better implantation of the inoculated yeasts. It should be noted that the yeast Lachancea thermotolerans that had received PEF treatment produced four-fold more lactic acid (3.62 ± 0.84 g/L) than the control of the same yeast, and Hanseniaspora vineae with PEF produced almost three-fold more 2-phenylethyl acetate than the rest. On the other hand, 3-ethoxy-1-propanol was not observed at the end of the fermentation with a Torulaspora delbrueckii (Td) control but in the Td PEF, it was observed (3.17 ± 0.58 mg/L).

Biocompatibility in Ternary Fermentations With Lachancea thermotolerans, Other Non-Saccharomyces and Saccharomyces cerevisiae to Control pH and Improve the Sensory Profile of Wines From Warm Areas.

Global warming is causing serious problems, especially, in warm regions, where musts with excess sugars and high pH produce wines with decreased freshness and unstable evolution. This study aimed to determine biocompatibility between yeast species, the capacity for microbiological acidification, and the aromatic profile produced in ternary fermentations in which Lachancea thermotolerans has been co-inoculated with Hanseniaspora vineae, Torulaspora delbrueckii, or Metschnikowia pulcherrima, and the fermentation process is subsequently completed with sequential inoculation of Saccharomyces cerevisiae. For this purpose, different cell culture media and instruments were used such as infrared spectroscopy, enzymatic autoanalyzer, chromatograph coupled with a flame ionization detector, spectrophotometric analysis, among others. The behavior of these yeasts was evaluated alone and in co-inoculation, always finishing the fermentation with sequential inoculation of S. cerevisiae, at a stable temperature of 16°C and with a low level of sulfites (25 mg/L) in white must. Significant results were obtained in terms of biocompatibility using population counts (CFU/ml) in differential plating media that permitted monitoring. Quantification of the five species was studied. Concerning acidification by L. thermotolerans in co-inoculations, we showed some metabolic interactions, such as the inhibition of acidification when H. vineae/L. thermotolerans were used, generating just over 0.13 g/L of lactic acid and, conversely, a synergistic effect when M. pulcherrima/L. thermotolerans were used, achieving 3.2 g/L of lactic acid and a reduction in pH of up to 0.33. A diminution in alcohol content higher than 0.6% v/v was observed in co-inoculation with the L. thermotolerans/M. pulcherrima yeasts, with total sugar consumption and very slow completion of fermentation in the inoculations with H. vineae and T. delbrueckii. The aromatic composition of the wines obtained was analyzed and a sensory evaluation conducted, and it was found that both L. thermotolerans and co-inoculations retained more aromatic esters over time and had a lower evolution toward the yellow tones typical of oxidation and that the best sensory evaluation was that of the Lt + Mp co-inoculation. Lachancea thermotolerans and co-inoculations produced wines with low levels of volatile acidity (<0.4 g/L). This work shows that good consortia strategies with binary and ternary fermentations of yeast strains can be a powerful bio-tool for producing more complex wines.

The Impact of Hanseniaspora vineae Fermentation and Ageing on Lees on the Terpenic Aromatic Profile of White Wines of the Albillo Variety.

Hanseniaspora vineae is a non-Saccharomyces yeast that has a powerful impact on the sensory profile of wines. Its effect on the aromatic profile of non-aromatic grape varieties, such as Albillo Mayor (Vitis vinifera, L), during vinification is a useful biotechnology to improve sensory complexity. Fermentation in steel barrels using Hanseniaspora vineae and sequential inoculation with Saccharomyces cerevisiae have been used to study the formation of terpenes and cell lysis in the production of Albillo white wines. The GC-MS analysis profile shows a significant effect of H. vineae fermentation on the contents of terpenes (≈×3), mainly in linalool (>×3), ß-citronellol (>×4), geraniol (>×2) and α-terpineol (≈×2). The contents of several polyoxygenated terpenes and some volatile phenols with a spicy aroma were increased during fermentation. In summary, Hanseniaspora vineae releases a large number of cell wall polysaccharides during fermentation that affect wine palatability and structure. Hanseniaspora vineae is a powerful bio-tool to enhance the fruitiness, floral notes and freshness in non-aromatic white varieties.

Use of UHPH to Obtain Juices With Better Nutritional Quality and Healthier Wines With Low Levels of SO2.

Ultra-high pressure homogenization (UHPH) is a high pressure technique in which a fluid is pressurized by pumping at higher than 200 MPa and instantaneously depressurized at atmospheric pressure across a special valve. The full process takes <0.2 s and the in-valve time is <0.02 s. In the valve, extremely intense impacts and shear forces produce the nanofragmentation of biological tissue at a range of 100-300 nm. The antimicrobial effect is highly effective, reaching easily inactivation levels higher than 6-log cycles even at low in-valve temperatures. At in-valve temperatures of 140-150°C (0.02 s) the destruction of thermoresistant spores is possible. Even when the temperature in-valve can be elevated (70-150°C), it can be considered a gentle technology because of the tremendously short processing time. It is easy to get outlet temperatures after valve of 20-25°C by the expansion and assisted by heat exchangers. Thermal markers as hydroxymethylfurfural (HMF) are not formed, nor are deleterious effects observed in sensitive compounds as terpenes or anthocyanins, probably because of the low effect in covalent bonds of small molecules of the high-pressure techniques compared with thermal technologies. Additionally, intense inactivation of oxidative enzymes is observed, therefore protecting the sensory and nutritional quality of fruit juices and avoiding or reducing the use of antioxidants as sulphites. UHPH can be consider a powerful and highly effective continuous and sterilizing technology without thermal repercussions, able to keep fresh juices with most of their initial sensory and nutritional quality and allowing high-quality and natural fermented derivatives as wine.

White wine processing by UHPH without SO2. Elimination of microbial populations and effect in oxidative enzymes, colloidal stability and sensory quality.

The use of UHPH sterilization in the absence of SO2 has been used to eliminate wild microorganisms and inactivate oxidative enzymes. A white must of the Muscat of Alexandria grape variety was continuously processed by UHPH at 300 MPa (inlet temperature: 23-25 °C). The initial microbial load of the settled must was 4-log CFU/mL for both yeast and moulds, and slightly lower for bacteria. After UHPH processing, no microorganisms were detected in 1 mL. UHPH musts remain without fermentative activity for more than 60 days. Concentrations of the thermal markers indicated the absence of thermal damage in the UHPH-treated musts, since 5-hydroxymethylfurfural was not detected. In addition, the must treated by UHPH keeps terpene concentrations similar to those of the untreated controls. A strong inactivation of the oxidative enzymes was observed, with no browning at room temperature for more than 3 days. The antioxidant value of the UHPH-treated must was 156% higher than the control.

Industrial Performance of Several Lachancea thermotolerans Strains for pH Control in White Wines from Warm Areas.

In the current scenario of climatic warming, the over-ripening of grapes increases the sugar content, producing flat and alcoholic wines with low acidity, high pH and low freshness. Additionally, a high pH makes wines more chemically and microbiologically unstable, requiring a higher sulphite content for preservation. Some strains of Lachancea thermotolerans can naturally lower the pH of wine by producing lactic acid from sugars; this pH reduction can reach 0.5 units. The industrial performance of four selected strains has been compared with that of two commercial strains and with that of Saccharomyces cerevisiae. The yeasts were assessed under variable oenological conditions, measuring lactic acid production and fermentative performance at two fermentation temperatures (17 and 27 °C), and in the presence or absence of sulphites (25 and 75 mg/L). Lactic acid production depends on yeast populations, with higher concentrations being reached when the microbial population is close to or above 7-log CFU/mL. A temperature effect on acidification can also be observed, being more intense at higher fermentation temperatures for most strains. Ethanol yield ranged from 7-11% vol., depending on the fermentation conditions (temperature and SO2) at day 12 of fermentation, compared with 12% for the S. cerevisiae control in micro-fermentations. The production of fermentative esters was higher at 27 °C compared with 17 °C, which favoured the production of higher alcohols. Volatile acidity was moderate under all fermentation conditions with values below 0.4 g/L.