Biocidal and antibiofilm activities of arginine-based surfactants against Candida isolates.

Amino-acid-based surfactants are a group of compounds that resemble natural amphiphiles and thus are expected to have a low impact on the environment, owing to either the mode of surfactant production or its means of disposal. Within this context, arginine-based tensioactives have gained particular interest, since their cationic nature-in combination with their amphiphilic character-enables them to act as broad-spectrum biocides. This capability is based mainly on their interactive affinity for the microbial envelope that alters the latter's structure and ultimately its function. In the work reported here, we investigated the efficiency of Nα-benzoyl arginine decyl- and dodecylamide against Candida spp. to further our understanding of the antifungal mechanism involved. For the assays, both a Candida albicans and a Candida tropicalis clinical isolates along with a C. albicans-collection strain were used as references. As expected, both arginine-based compounds proved to be effective against the strains tested through inhibiting both the planktonic and the sessile growth. Furthermore, atomic force microscopy techniques and lipid monolayer experiments enabled us to gain insight into the effect of the surfactant on the cellular envelope. The results demonstrated that all the yeasts treated exhibited changes in their exomorphologic structure, with respect to alterations in both roughness and stiffness, relative to the nontreated ones. This finding-in addition to the amphiphiles' proven ability to insert themselves within this model fungal membrane-could explain the changes in the yeast-membrane permeability that could be linked to viability loss and mixed-vesicle release.

Interaction of cationic surfactants with DPPC membranes: effect of a novel Nα-benzoylated arginine-based compound.

Cationic amino acid-based surfactants are known to interact with the lipid bilayer of microorganism resulting in cell death through a disruption of the membrane topology. To elucidate the interaction of a cationic surfactant synthesized in our lab, investigations involving Nα-benzoyl-arginine decyl amide (Bz-Arg-NHC10), and model membranes composed by 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) were done. Bz-Arg-NHC10was able to penetrate into DPPC monolayers up to a critical pressure of 59.6 mN m-1. Differential scanning calorimetry revealed that as the concentration of Bz-Arg-NHC10 increased, the main transition temperature of DPPC slightly decreased. Atomic force microscopy (AFM) in situ experiments performed on supported DPPC bilayers on mica allowed monitoring the changes induced by Bz-Arg-NHC10. DPPC bilayer patches were partially removed, mainly in borders and bilayer defects for 50 µM Bz-Arg-NHC10 solution. Increasing the concentration to 100 µM resulted in a complete depletion of the supported bilayers. Surface plasmon resonance (SPR) experiments, carried out with fully DPPC bilayers covered chips, showed a net increase of the SPR signal, which can be explained by Bz-Arg-NHC10 adsorption. When patchy DPPC bilayers were formed on the substrate, a SPR signal net decrease was obtained, which is consistent with the phospholipids' removal observed in the AFM images. The results obtained suggest that the presence of the benzoyl group attached to the polar head of our compound would be the responsible of the increased antimicrobial activity against gram-negative bacteria when compared with other arginine-based surfactants.

Bromide counterion as a spectroscopic sensor at the interface of cetyltrimethylammonium micelles.

The strong UV absorption of the bromide in aqueous solution undergoes a remarkable red shift of more than 10 nm induced by the addition of the salts that constitute a saline buffer. The maximum absorption wavelength of the bromide is displaced from approximately 194 nm in ultrapure water to wavelengths above 200 nm, depending on the composition of the solution. The bromide spectrum as counterion of the cetyltrimethylammonium in the surfactant CTAB also shows sensitivity to the aggregation behavior of the tensioactive, being able to detect intermolecular interactions even at concentrations lower than the critical micelle concentration. And, when the micelles are assembled, the bromide absorption detects the interfacial rearrangements caused by the incorporation of ions. To know more about those interfacial features, the pyrene molecular probe was used, taking advantage of the extensive knowledge of its spectroscopy. Pyrene verifies the existence of changes in the interfacial organization which confirm that the sensitivity of the bromide spectrum is based on the ability of the ion to detect its microenvironment, and therefore reaffirms that its absorption spectrum can be used as a local sensor. The present work encourages the use of bromide as a sensor ion in the UV region between 190 and 210 nm, which would avoid the introduction of external molecular probes that could disturb the system.

Cationic surfactants as antifungal agents.

Fungi-in being responsible for causing diseases in animals and humans as well as environmental contaminations in health and storage facilities-represent a serious concern to health security. Surfactants are a group of chemical compounds used in a broad spectrum of applications. The recently considered potential employment of cationic surfactants as antifungal or fungistatic agents has become a prominent issue in the development of antifungal strategies, especially if such surface-active agents can be synthesized in an eco-friendly manner. In this review, we describe the antifungal effect and the reported mechanisms of action of several types of cationic surfactants and also include a discussion of the contribution of these surfactants to the inhibition of yeast-based-biofilm formation. Furthermore, the putative mechanism of arginine-based tensioactive compounds as antifungal agents and their applications are also analyzed.

Volume expansion of erythrocytes is not the only mechanism responsible for the protection by arginine-based surfactants against hypotonic hemolysis.

A novel arginine-based cationic surfactant Nα-benzoyl-arginine dodecylamide (Bz-Arg-NHC12) was synthesized in our laboratory. In this paper we study the interaction of Bz-Arg-NHC12 with sheep and human red blood cells (SRBC and HRBC respectively) due to their different membrane physicochemical/biophysical properties. SRBC demonstrated to be slightly more resistant than HRBC to the hemolytic effect of the surfactant, being the micellar structure responsible for the hemolytic effect in both cases. Moreover, besides the hemolytic effect, a dual behavior was observed for the surfactant studied: Bz-Arg-NHC12 was also able to protect red blood cells against hypotonic lysis for HRBC in a wide range of surfactant concentrations. However, the degree of protection showed for SRBC was about 50% lower than for HBRC. In this regard, a remarkable volume expansion was evidenced only for SRBC treated with Bz-Arg-NHC12, although no correlation with the antihemolytic potency (pAH) was found. On the contrary, our surfactant showed a greater pAH when human erythrocytes were submitted to hypotonic stress, with a low volume expansion, showing a higher amount of solubilized phospholipids in the supernatant when compared with SRBC behavior. Surface plasmon resonance measurements show the molecular interaction of the surfactant with lipid bilayers from HRBC and SRBC lipids, demonstrating that in the latter neither microvesicle release or lipid extraction occurred. Our results demonstrate that the volume expansion of erythrocytes is not the only mechanism responsible for the protection by surfactants against hypotonic hemolysis: volume expansion could be compensated via microvesicle release or by the extraction of membrane components upon collisions between red blood cells and surfactant aggregates depending on the membrane composition.

Biocatalytic synthesis, antimicrobial properties and toxicity studies of arginine derivative surfactants.

Two novel arginine-based cationic surfactants were synthesized using as biocatalyst papain, an endopeptidase from Carica papaya latex, adsorbed onto polyamide. The classical substrate N (α)-benzoyl-arginine ethyl ester hydrochloride for the determination of cysteine and serine proteases activity was used as the arginine donor, whereas decyl- and dodecylamine were used as nucleophiles for the condensation reaction. Yields higher than 90 and 80 % were achieved for the synthesis of N (α)-benzoyl-arginine decyl amide (Bz-Arg-NHC10) and N (α)-benzoyl-arginine dodecyl amide (Bz-Arg-NHC12), respectively. The purification process was developed in order to make it more sustainable, by using water and ethanol as the main separation solvents in a single cationic exchange chromatographic separation step. Bz-Arg-NHC10 and Bz-Arg-NHC12 proved antimicrobial activity against both Gram-positive and Gram-negative bacteria, revealing their potential use as effective disinfectants as they reduced 99 % the initial bacterial population after only 1 h of contact. The cytotoxic effect towards different cell types of both arginine derivatives was also measured. Bz-Arg-NHCn demonstrated lower haemolytic activity and were less eye-irritating than the commercial cationic surfactant cetrimide. A similar trend could also be observed when cytotoxicity was tested on hepatocytes and fibroblast cell lines: both arginine derivatives were less toxic than cetrimide. All these properties would make the two novel arginine compounds a promising alternative to commercial cationic surfactants, especially for their use as additives in topical formulations.

Analytical characterization and purification of a commercial extract of enzymes: a case study.

This paper presents a rational strategy to identify and quantify the components of a commercial extract of the lipase B of Candida antarctica that can be extended to the analytical investigation of other crude extracts of enzymes. These information provided the fundamental knowledge for the development of a methodology to obtain highly pure and catalytically active CALB enzyme. The commercial extract Lipozyme(®) was subjected to a series of analytical techniques that allowed determining the presence of a non-soluble fraction; nucleic acids; benzoate and sorbate species and a mixture of three proteins. Particularly, it is worth noticing that the Bradford assay using CALB as standard instead of BSA proved to be a more reliable and accurate methodology to quantify the protein content of the assayed enzymatic samples. Size exclusion chromatography coupled with anionic exchange chromatography using a non-conventional, easy to remove buffer system such as ammonia-ammonium acetate afforded a sample that retains 47% of the proteins (being CALB the only enzymatic component of the purified sample) with a hydrolytic activity higher than the crude extract.

Sodium tetrathionate effect on papain purification from different Carica papaya latex crude extracts.

Papain from latex of Carica papaya was purified up to matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) mass spectrometry homogeneity by salt precipitation from two different crude extract sources: a refined preparation obtained in our laboratory and a commercial one. Sodium tetrathionate was tested in the purification process to preserve the enzymatic activity of the peptidase. Purification was checked by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis (PAGE) and cation exchange chromatography, using commercial pure papain as standard for a rapid comparison. The best purification yields (3.4%) were obtained in presence of 30 mM sodium tetrathionate for the crude extract prepared in our laboratory. The described purification method proved to be robust and reliable to obtain pure papain on a preparative scale.

Proteolytic properties of Funastrum clausum latex.

As part of a screening of latex endopeptidases from plants growing in Argentina, the presence of proteolytic activity in the latex of Funastrum clausum stems is reported. The proteases present in the crude extract showed the main characteristics of the cysteine proteolytic class, i.e. optimum pH at alkaline range, isoelectric point (pI) higher than 9.0, and inhibition of proteolytic activity by thiol blocking reagents. A remarkable thermal stability was also evident in the crude extract. Endosterolytic preference tried on p-nitrophenyl esters of N-alpha-carbobenzoxy-L-amino acids was higher for the alanine, asparagine and tyrosine derivatives. Preliminary peptidase purification by two-step ionic exchange showed the presence of two proteolytic fractions with molecular masses of approximately 24.0 kDa according to SDS-PAGE.

Funastrain c II: a cysteine endopeptidase purified from the latex of Funastrum clausum.

A cysteine endopeptidase, named funastrain c II, was isolated and characterized from the latex of Funastrum clausum (Asclepiadaceae). The molecular mass (mass spectrometry) of the protease was 23.636 kDa. The analysis of funastrain c II by SDS-PAGE revealed a single polypeptide chain. The enzyme showed a remarkable stability of its caseinolytic activity after incubation at temperatures as high as 70 degrees C. Inhibition and activation assays indicated the cysteinic nature of the funastrain c II catalytic site. The optimum pH of funastrain c II enzymatic activity varied according to the substrate used (9.0-10.0 for casein and 6.2-6.8 for PFLNA). Kinetic parameters were determined for N-alpha-CBZ-Ala p-nitrophenyl ester (Km = 0.0243 mM, kcat = 1.5 s(-1)) and L-pyroglutamyl-L-phenylalanyl-L-leucine-p-nitroanilide (PFLNA; KM = 0.1011 mM, kcat = 0.9 s(-1)). The N-terminal sequence of funastrain c II showed considerable similarity to other proteases isolated from latex of different Asclepiadaceae species as well as to other cysteine proteinases belonging to the papain family.