Nonaqueous electrophoresis on microchips: A review.

The use of organic solvents as electrolytic medium in electrophoresis has become an important alternative for the analysis of compounds that exhibit low or no solubility in water. In recent years, nonaqueous electrophoresis has been extensively explored in conventional capillary systems for different applications. On the other hand, this separation strategy is still not as popular as free solution electrophoresis on chip-based platforms due to the effects of solvent in the background electrolyte on the sample injection, detection performance, and microfluidic platform compatibility. In this way, this review summarizes the main achievements on nonaqueous microchip electrophoresis (NAME). To the best of our knowledge, this is the first review dedicated to discuss exclusively nonaqueous electrophoresis on chip-based systems. For this purpose, some important theoretical aspects involved when separations are performed in organic medium, such as equilibrium, interactions and electrophoretic considerations, are included in the review. In addition, the main challenges, advantages and influences of nonaqueous media on the sample injection, detection as well as the choice of the substrate to fabricate chip-based electrophoresis devices are highlighted. Last, examples showing the feasibility of nonaqueous microchip electrophoresis for applications exploiting different methodologies, operational, and instrumental conditions are summarized and discussed. We hope this review can be useful to spread the huge potential of nonaqueous electrophoresis on microfluidic platforms.

Rapid separation of post-blast explosive residues on glass electrophoresis microchips.

This study describes the development of an analytical methodology based on the use of microchip electrophoresis (ME) devices integrated with capacitively coupled contactless conductivity detection (C4 D) for the separation and detection of inorganic anions in post-blast explosive residues. The best separation condition was achieved using a running buffer composed of 35 mmol/L lactic acid, 10 mmol/L histidine and 0.070 mmol/L cetyl(trimethyl ammonium) bromide. For C4 D measurements, the highest sensitivity was obtained applying a 700 kHz sinusoidal wave with excitation voltage of 20 Vpp . The separation of Cl- , NO3- , NO2- , SO42- , ClO4- and ClO3- was performed within ca. 150 s with baseline resolution and efficiencies between 4.4 × 104 and 1.7 × 105 plates/m. The found limits of detection ranged between 2.5 and 9.5 µmol/L. Last, real samples of post-blast explosive residues were analyzed on the ME-C4 D devices obtaining successfully the determination of Cl- , NO3- and SO42- . The achieved concentration values varied between 12.8-72.5 mg/L for Cl- , 1.7-293.1 mg/L for NO3- and 1.3-201.3 mg/L for SO42- . The data obtained using ME-C4 D devices were in good agreement with the concentrations found by ion chromatography. The approach reported herein has provided short analysis time, instrumental simplicity, good analytical performance and low cost. Furthermore, the ME-C4 D devices emerge as a powerful and portable analytical platform for on-site analysis demonstrating to be a promising tool for the crime scene investigation.